Problems with my 5.1 surround system

Hi everyone, for sometime now i've had some problems with my 5.1 speakers, the thing is when i watch youtube, vimeo or that kind of webs i only hear 2 of the five speakers and let me tell you, it sounds like crap...so i was wondering if any of you could help me fix this problem.
greets!

A Year Later... has this been fixed?
I have a SB Recon3D PCIe card (and older, lesser version of yours), and I have exactly the same problem. I'm on Windows 7 x64 and CS6. It is interesting that in Audition CS6, When I select the MME Device Class, that my channel mapping shows 6 channels, and when I play files back in Audition, I get full 5.1 surround. But, when I try the same thing in Pr, even taking the 5.1 file created and exported as WAV from Au into Pr, where I can see all 6 channels mapped correctly and the meter shows the correct volumes in each channel when played back in Pr, I hear only Stereo. Channel mapping in Pr shows the same thing yours does.
The bad part (or good, from my perspective) is, I was planning on buying the SB Z to hopefully FIX this problem thinking perhaps it was just a Recon3D problem. So I guess that's out. Can you get Audition CC to work correctly in Surround? Give it a try.
From my perspective, it appears to be a Premiere Pro issue, apparently from CS5 (when it went native 64 bit) that still haunts us all. HAS ANYBODY GOTTEN 5.1 TO WORK IN PREMIERE PRO?
Cheers,
Shane

Similar Messages

HP Officejet Pro 8600+ "There is a problem with the printer or ink system..."

I have an HP Officejet Pro 8600+ that is coming up with an error message. This just happened out of the blue yesterday. The printer is just over a year old.
It says:
"There is a problem with the printer or ink system. Print head missing not detected incorectly installed or incompatable"
I have removed and reinstalled ink cartridges, the head, unplugged, cleaned, etc. etc.
HP Officejet Pro 8600+
Product Number CM750A
Serial Number {Content Removed}
Not under warranty
Please advise.
This question was solved.
View Solution.

Sorry that you are experiencing this problem. Here is a link that may assist you with the ink system.
http://goo.gl/BXDFf
It seems to be a bad print head, or it needs manually cleaned with lint free cloth and water. If these steps do not resolve the issue, contact HP Support (1800-474-6836).
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Problem with the printer or ink system code 0x610000f6 HP model 6700 premium

Hello, I have recieved an alert for the second time in a week stating that there is a problem with the printer or ink system. The alert prompts me to turn off, then on the printer. If problem persists, contact HP. 0x610000f6. What could be the cause for this type of alert to appear?

'0x610000f6' error message appears if there is a 'Paper Jam' or a 'Carriage Jam' in the printer.
You can experience following issues:
The product won't print.
The print job stops unexpectedly.
To resolve Error code '0x610000f6' follow methods provided in below mentioned link
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01620497

There is a problem with the printer or ink system.

Will not print. Turn it off then back on; will print one document, but not the last page. Try printing only the last page, but will not print. Will not print one page documents at all. Will not print more than one document without repeating this process.
First Error message: "There is a problem with the printer or ink system. Turn the printer off, then on. If you continue to get this message, contact HP." Out of warranty.
Tried this page: http://support.hp.com/us-en/document/c03081973
Which led me to this page: http://support.hp.com/us-en/document/c03262508
Now that the ink cartridges are removed as instructed, the carriage will not return to the center of the access area.

Hey @KennyBee51,
Thanks again for getting back to me regarding this issue.
I would have to agree that the HP Officejets Printhead system is defective. I would recommend at this time that you contact our Technical Support queue by phone to explore additional hardware options.
HP Technical Support can be reached at: 800-474-6836.
If you live outside the US/Canada Region, please click the link below to get the support number for your region.
HP Worldwide Contact
It has been a pleasure working with you. I wish you luck going forward with this!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Problem with the printer or ink system. Turn printer off message.

A message on the printer reads that there is a problem with the printer or ink cartridges. I turned off printer several times, I have replaced cartridges. At the bottom it says to contact HP. What do I do to get my printer working again? I also need to delete other printers that are listed as ones that I can use. I don't have any idea about these other printers other than the HP printer 6700, All in one.

Hi , I understand you are seeing an error stating there is an problem with the printer or ink system. If you have completed the solutions presented in the following document I suggest calling us: HP Officejet Printers - 'Problem with Ink System' Error Message Displays on the Computer During Setup. To reach somebody in tech support, what you can do, is use the following link to create yourself a case number, then call and it may help speed up the call process:
Step 1. Open link: www.hp.com/contacthp/
Step 2. Enter Product number or select to auto detect
Step 3. Scroll down to "Still need help? Complete the form to select your contact options"
Step 4. Scroll down and click on: HP contact options - click on Get phone number
Case number and phone number appear.

Genius needs to help! problems with my video card and system

Hey guys! I'm going to post my specs first so that you get a good idea of what I'm running on:
MSI Neo2 LS 865PE.....MAT=Slow
Pentium4 2.4C.....FSB=233=2.8C hyperthreading enabled ~>1.55V
Corsair TwinX 1gig PC3700.....memory on "AUTO" in BIOS with timings at 3,4,4,8 ~> 2.7V
Radeon 9700NP.....stock speeds ~>1.7V
AlienX case with 2 fan400 watt power supply and 6 case fans
Zalman Alum/Copper heatsink fan
1:I've had this motherboard for a few months now. I upgraded my video card from a nVidia Ti4200(128meg) to a Radeon 9800 a month ago, but I couldn't get it working at 8X AGP, no matter what voltages I threw at it. I returned it for a Radeon 9700NP hoping that it would work, but it still won't.
I'm using BIOS 1.9 and since there is no option to select your AGP speed, I could only try using ATI's drivers. Once booted into Windows, there is a slider you can move to select you AGP speed. On my machine It says that It has performed some tests and has concluded that AGP 4x is the best for my system....but my system supports AGP 8X!
I've moved the slider over to 8x (which requires a reboot) at least 5 times with each card but the slider refuses to move past 4xAGP after the reboot.
2: My second problem: I had an old stick of KingMax PC3200 and decided to buy 3 more sticks. Unfortunatly, the 3 I bought did not match the one I had, so I only put 2 of the new sticks I bought into my system. Immediatly, My system would crash, lock up, files were corrupt, and I got PLENTY of blue screens of death with a long message containing: 0x0000007 with all these other numbers and "0"s. I did a search online and found out I had a hardware incompatibility problem. I never got this with my old stick of ram.
I returned the 3 sticks of Ram and replaced them with the Corsair. Put my new Radeon 9700 in, formatted my hard drive....and within 24 hours, my system locked up 3 times, rebooted itself 5 times, and gave me the same BSOD as mentioned above with the same long message.
I didn't change anything except for the memory and the video card. I've been wanting to overclock, (thats why i bought the faster memory ) but I'm not sure what to do at this point.
I have my FSB at 233 but I'm scared to go any higher because of previous system instability at stock speeds. My RAM was running on 400 and MAT=Turbo with the most relaxed timings at 3,4,4,8.
I've given myself hours of sleepless nights formatting when my system wouldnt boot into windows; overclocking....etc. I NEED HELP. PLEASE. PLEASE. Anything could work at this point.
I'm trying to get more info on how to run my system at a 5:4 ratio, also.
If anyone has problems like me or knows what could be the problem with my system, please reply to this post, it would help me a lot. I've been trying to fix these problems for a few months now so anything is greatly appreciated.

Thanks a lot to you guys that responded. I brought my computer home this past holiday and I want to let you know where I stand as of now. I guess this thread is like my blog for my computer. I want to clear some things before my first post makes everyone confused.
1- I have only 2 sticks of memory in my system: the Corsair PC3700 TwinX 512x2
I returned the 3 KingMax I bought, and still keep my old stick just in case.
2- I am using the 400 watt power supply that came with the case. I read some reviews of the case and I know the reviewer did not have problems with the power supply. In my BIOS, there are some voltages it is weak on. Lets say: it it should be 5.00+, my power supply will be feeding it 4.96v or something like that, but I dont know, or think, that is a major problem...
3- My computer will refuse to boot if memory speeds are set at anything below 400. SO....if I want to use a 5:4 ratio and have to set my memory speeds to "333" in BIOS, my system refuses to boot.
4- This morning, I did manage to overclock my FSB to 250. Specs are as follow:
Memory Timing @3,4,4,8,4.....speed set at "AUTO".....MAT at "SLOW"
MY 2.4C's FSB was raised to 250 = 3.0gig
AGP/PCI frequency: 67.xx/3x.xx (cant go any lower)
CPU voltage: 1.5500
Memory voltage: 2.75
Video Card voltage: 1.7
Everything was fine for the whole day until I heard something click in my computer around midnight, and then seconds later, my computer froze and made a continuous beeeeeeeeeeeeeeeeeep. (you can imagine)
This "click" and system crash has been plaguing me for months now. I dont know whay it happens. I was just using AIM when I heard the click and my heart stopped.
My memory speeds have been set to "AUTO" even at the FSB of 250. But I don't know if this still means my system is at a 1:1 ratio. I know the BIOS then adjusts the memory to work at 500 if my FSB is 250...so I assume it is? I love 3gig, but somehow I feel that 2.8 is faster, since the FSB=233 running parallel to my memory, also at 233
A FSB of 250 is good enough for me, that's what I've been waiting 6 months for. If anyone knows how to set other ratios to achieve a FSB of 250+, please let me know, but as I said, my memory won't boot if its set at "333"

Problem with TMS setup in HA systems

Dear colleagues,
Our team have installed a new production environmnent to ECC in HA. We have a ASCS in cluster and two dialog instance in each server(local instance).
A virtual host GPPR3CIB and two instances in local, node GPPR301 and node GPPR302. This is an ECC 6.0 on Windows 2003 Server and SQL server 2005.
The architecture is as follows:
- GPPR301 node:
   - Virtual ASCS ASCS_0 (message server)
   - ABAP Primary Instance PPR301_1 (disp+work)
   - ERS (Enqueue replication server) instace ERS_10
- GPPR302 node:
   -ABAP Additional Instance PPR302_2 (disp+work)
   -Virtual Database Instance GPPR3DB
   -ERS (Enqueue replication server) Instance ERS_10
Once the installation is complete you need to apply SAP Note No. 943334 - "TMS setup in high availability systems" to set up high availability STMS. The problem is to distribute the configuration after running
the report " 'TMS_MGR_LOADBALANCING" described in SAP note.
The message indicates problems trying to run the command tp.exe. It has followed the note No. 1010990 and we have checked the folder permissions of the kernel but the problem persists.
Any information or help regarding this type of setup would be welcome.
Thanks.

Hi,
We have solved the problem with STMS. After several tests, the problem was in the parameter SAPLOCALHOSTFULL. This parameter must be assigned the hostname of the local system for each profile instance. If you've assigned the virtual host in the cluster generates the error in the distribution of the STMS.
Regards.

Bizarre networking problem with multiple 8.1 GA systems -- RT and Pro

Hi everyone,
I'm having a particularly bizarre problem with the networking on two Windows 8.1 machines, one running Pro and one running RT. Both demonstrate the same behavior.
In both cases, networking (wireless most of the time, although I'm not sure it matters) works fine for some period of time. Eventually it just stops working. Resetting the adapter, or flipping in and out of Airplane mode will bring it back again. The issues
happen on at least 3 wireless access points. In most cases, the networking actually appears to be up -- the limited access warning icon isn't up, although occasionally it does realize the networking isn't working.
Here's the bizarre part -- on both systems, local IP connectivity is fine. I can communicate perfectly well between devices on the same internal network, wired or wifi. During the time the networking isn't working on one or the other 8.1 system, other systems
on the network running Windows 8 (and other systems) work fine. There's no correlation between one 8.1 system stopping working and the other.
On *both* systems, when the networking appears to be failing, a traceroute actually gets 4-5 (or more) hops before going out to lunch. Other systems on the same internal network will cruise along to the same point on the route that is failing on the 8.1
machines and keep right on happily continuing the trace.
So that's the bizarre thing -- something on two 8.1 machines is doing *something* to the packets that is causing them to not route properly to a target system 10-15 hops away, the same routers handling the same kind of traffic from other systems behind my
firewall work fine, and whatever is happening to the packets that is causing issues resolves itself for some period of time if I reset the adapter. (The two systems are a MacBook Air and a Surface RT, so there's no drivers in common between them, either.)
I'm completely at a loss. Anyone see anything like this before, or have any thoughts on what to check?
(And, please, if you're one of those Microsoft support forum people who skim questions for keywords and cut-n-paste back a generic reply without any actual understanding of the problem -- like so many replies on here -- please do not waste my time. I am
trying to find someone who knows Windows 8.1 networking, not someone who knows just enough English to use ctrl-c/ctrl-v)

Hi George,
There is a known issue about Cisco device. It caused some windows 8 clients disconnected from wifi. I understand your windows 8 clients works fine, when the issue occurred on windows 8.1 clients. However, I think the KB article is worth a shot
http://support.microsoft.com/kb/2749073
Best regards,
Alex Du
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

Please can anyone help with the continuing password rejection problem with email.Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

Please can anyone help with the continuing password rejection problem with email on my imac.My Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

I use free Yahoo mail webMail access because folders I created in webmail access doesn't get set up in Apple Mail. While I was searching for post about password and keychain issues, I stumbled on several threads that complain about Mail folder issues, so I'm holding off on Apple Mail.
On the password and keychain issue that your post is all about. I've been using login keychain to save and automatical fill my login screens for a year or so successfully, with Safari and Chrome. Automatic form fill also works for Facebook login. Unfortunately, about 4 to 6 months ago, automatic password form fill stopped working with Yahoo webmail, while still worked for GMail (Safari and Chrome). I tried deleting the password entry for my two Yahoo email accounts to start fresh, but neither Safari not Chrome will even ask me if I want to save the password. I was so frustrated that I eventually installed the keypassX 0.43 (password manager) that is quite primitive sompare to OS X's keychain (when it works). Probably no surprise to you yet.
The surprise, to me at least, is that, for whatever reason, password auto form-fill from keychain started working again for Yahoo webmail login on Safari about 5-7 days ago. Still doesn't work on Chrome!
Two tips I can share, at least with webmail access:
1. Password is save only for one of my yahoo mail accounts. When I login in with my other yahoo account, I get no prompt to save the password, and form fill doesn't work when I try to log in a second time with my other Yahoo mail account.
2. On inspection of my login keychain, I see a webform password item saved for my Yahoo account that works with keychain. The name of the password is: login.yahoo.com(MyAccountName1#). When I open the password item and look in the Access Control tab, I see Safari and Chome are listed as allowed to access this password item..
I also an "Internet password" item with a name of just login.yahoo.com. When I open the the password item, it looks just like the password item created for MyAccountName#1, but the MyAccountName#2 is listed in the Account field. Inside the Access Control tab, no apps are listed in access permission. I added Safari and Chrome to the lists of allowed app, saved the password item.
Now when I bring up the Yahoo login page(by bookmark) on Safari, form fill fills in MyAccountname#1 for name and the proper password and I can login in. When I change the name to MyAccountName#2, the correct password is retrieved and I can log in! Alas, it still doesn't work on Chrome.
BTW, I changed the password item type from "Internet password" to "Web Form password" and saw no difference! I also edited the name to be "login.yahoo.com (MyAccountName#2)" to look like the web form password item that works, but it has no effect either.
From my experimentation, here's my observation:
1. A Web Form password item is created for the first account name(MyAccountName#1) for login.yahoo.com and typed as Web Form password. When I log in using MyAccountName#2, an Internet Password is created, but no applications are listed as allowed to access the password item, even when the password item was created after just logged in and logged out to yahoo with the account name and password for MyAccountName#2.
2. Manually adding Safari as an app that is allowed to use the password item works. Doesn't work with Chrome!
The version of Safari I'm using is Version 5.1.7 (6534.57.2). My installed version of Chrome is Version 21.0.1180.79 beta.

Surround sound with Venturer 5.1 surround system with converter jack?

Hi, i need help.. I have a sound blaster x-fi extreme sound card and i can't seem to get surround sound out of it. i have a surround system that outputs two rca jacks (red for right and white for left) and i have a jack similar to this?to convert it to a 3.5mm jack to plug into my sound card. when i plug it in, it doesn't recognize the surround sound and it doesn't play on the back two speakers.

Hi Andrew,
The latest drivers release on 4 Nov, 2014 can be found here.
Please download/install it and let me know if you still have the same problem.
Cheers,
Colin-CL

Problems with soundblaster x-fi surround 5.1

, Hello,
I have problems with my 'soundblaster x-fi surround 5.'.
-the speakers make 'plop' sounds
-the software 'startup centre', 'configuration' etc. give this message (translated from Dutch): "There are no compatible audiodevices found. Please close the program."
I have this poblems using a 64bit Vista, and not on a 32bit Vista (other machine).
Thanks,
Ivar

Hi Enk,
unfortunately a lot of people have the same problem.
There is another thread for this topic:
http://forums.creative.com/creativel...scending&page=
but for now there is no solution.
The only way to get the product working with "realtime" sound is to install the Vista driver from 2006, but with that one you have only stereo sound and the creative applications will not detect the product.
As I understand it, the delay can only be a driver issue.

Problem with T7700 7.1 Speaker System

I'm currently having a problem with the speaker system named above. For no reason at all, whether I'm playing a game, watching a mpg or listening to mp3's, the volume on the speakers raises and lowers every few seconds for no apparent reason. This has been happening for a few months now. (I bought the speakers December 2003) I've ruled out the sound card (Audigy 2 ZS) because I've tried these speakers on two different systems. Any ideas what it could be or if you need any more info, please let me know. Thanks.

I can't read good, I didn't see your hardware. My mistake.
I reinstalled my drivers, and that seems to have helped. I think it may have had something to do with Windows XP SP2 or my onboard sound, I don't know for sure though.

Hi!!I have some problems with the synchronization of my system, and I don´t know how I can solve this!

My system consists of differents vi´s.Some of them are used to read analogic inputs and digital inputs, using the serial port.
The values that I read, go through differents vi to be proccesed, and at the end, these values are written in a file, all the values in the same file.
My problems of synchronization are:
1. I have one vi per input, and all of them use the same serial port. How can I synchronize them to avoid serial port conflicts? (using queues??) And how can I do, to get differents number of samples/sg with every vi? I have to introduce them in differents loops?
2. The other problem is that, for example, I want to read 8 samples/ s but I only want
to write two samples every second. How can I do to avoid stoping the data flow?
Maybe, my problem is that I want to see the system like
one block, and I am ignoring that, although all the system works like a block, every part works using a different "speed". I don´t know how tools can I use to combine two ideas, working like an only system( data dependence, some vis need the data of others vi to be able to work) and working getting differents numbers of samples/s.
I have seen that there are synchronization vis. I am going to glance at them, maybe I find something interesting but I amsure that your help will be very useful?
Thanks in advanced!!
Graci

I think you are pretty much on the right track with Queues. I have implemented a very similar system myself using queues. I have even different systems connected to the serial interface, but I can synchronise them all easily using the following method:
1) Make a VI for opening the serial port and reading the data. The data (parsed to extract the numbers required) are then stored in an array (Shift register). If the pre-determined time delay is reached (say 5 seconds) the values are averaged and written to a Queue with a defined data type. Save the VI as a VI template.
2) Make a VI which starts an instance of this template VI for every channel you require. You can use VI Server to set values on the new front panel before you set it's property to "running". Setting a timer value for all can help ensure that the X-Axis of your timing values (if you require) are synchronised. The clue here is to define and initiate a QUEUE per channel. (RS-232_1, RS-232_2 and so on). The QUEUE name needs to be passed to the VI Template before running so that each VI running in the background has an individual link to the main program.
The second part of this VI simply uses an array of QUEUES, polling them one after another with a timeout of, say 5 ms. If data is found, append accordingly to an XY-Graph.
I also add in some "Auto termination" in the VI template (MAx number of values allowed in the QUEUE for example) to allow for the background processes to find out if the front-VI is still running or not. There are many different ways to do this, shoose the best for your application.
With this approach, it's not even important what instrument is connected as long as data is written in a specified format into a known QUEUE. I have also developed systems where I can transparently (almost) drop in VI Templates for instruments with similar functionality (output data) from different suppliers.
I would post an example, but the time it would take me to clean it up is too large. Sorry. If you have any further questions, don't hesitate to ask further questions.
Shane.
Using LV 6.1 and 8.2.1 on W2k (SP4) and WXP (SP2)

Problems with Satellite L775D-S7305 System Recovery Process

1. Grandson accidentally erased 500GB internal hard drive. Recovery partition was not available. Ordered, paid for and received Toshiba "SW Media-DVD-SATELLITE-L775-Windows 7 64 bit Home Premium-EN" recovery media.
2. While going through recovery process (3 times) to "Restore to Factory Out of the Box Settings" using Disk 1 of 4 - received "can't read from source file or disk" read errors from the following four boot related files:
(a) Boot64.WIM, Type: WIM File, Size: 142 MB, Date Modified: 11/3/11 12:28pm
(b) BCD, Type: File, Size: 256 Kb, Date Modified: 11/4/10 5:52pm
(c) Boot.SDI, Type: SDI File, Size: 3.02 MB, Date Modified: 11/4/10 6:18pm
(d) EFTSBoot, Type: MS-DOS Application, Size: 4.00 Kb, Date Modified: 11/4/10 5:52pm
(e) At end of Disk 1 recovery process received error - Toshiba Recovery Wizzard INITRECAREA.EXE - Application Error. "The instruction at 0x75D5FF26 reference memory at 0x01D700. The required data was not placed into memory because of an I/O error status of 0xc000009c." The Recovery Process was terminated due to Error 9c. Select (Finish).
3. Reported issue to Toshiba Support - who sent a new set of recovery media to verify if either defective recovery media or defective installed 500 GB hard drive.
4. Repeated recovery process (3 times) with new media set - had exact same results as above. Assumed had internal hard disk problem according to Toshiba Support.
5. Ordered, received and installed new 1 Terabyte Toshiba 2.5 inch internal hard drive (PH2100U-1I54). Reset BIOS to Default (F2, F9, F10) and system recognized new hard drive as MQ01ABD100.
6. Repeated recovery process (3 times each) with both sets of recovery media - had exact same results as above.
7. Reported issue to Toshiba Support and asked because obtained same "can't read boot related source file errors" on two sets of recovery media with two different hard drives - was there a possibility of defective recovery media, or some other problem?
8. Toshiba Support would not acknowledge and indicated could not send another recovery media set because had already sent two. Also indicated new hard drive was probably improperly installed (because of configuration issues) and recommended seek local technical assistance.
9. Sought local technical assistance and was not able to recover system using Toshiba recovery media (said to be defective). Verified sucessful installation of internal hard drive and no other laptop problems.
10. Able to re-install system using Windows 7 Professional installation CD, downloading YTD Toshiba BIOS and hardware drivers, and installing latest ATI video/graphics drivers.

I understand the issue you're having & realize that it's a frustrating experience going through this. Can't understand why it didn't work with the original hard drive, unless it had some bad sectors or possibly even bad RAM. The tech who checked it out would have (or should have) caught any RAM issues.
However, on some systems, an extra DVD should be in the ordered recovery set in case a new or different size HDD is used, I had this experience with HP. Installed a 750GB WD Caviar Black in place of the OEM supplied 320GB Caviar Blue, my created recovery DVD's (3) wouldn't do the job. HP provided me a new set with the 4th DVD for $16. It worked. I didn't realize it until later, the ISO for that issue could have downloaded from the site. My fault for not checking.
Makes me wonder if this was the case in your situation. This doesn't happen often, but when it does, that extra DVD is needed.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-80183-1&cc=us&dlc=en&lc=en&...
At any rate, glad to hear that you got it working, though probably your complete utility package wasn't installed. More than likely enough to be OK though, some of these options are seldom used, & are simply using drive space, especially those with SSD's. I just clean installed Windows 8 Pro onto my Toshiba A665-S6086 & after using the Toshiba Windows 8 Upgrade Assistant to install the needed software (I chose all), it's the largest Windows 8 Pro install that I've done (after all updates/apps were installed). Usually less than 30GB is used, counting Office 2010 Pro Plus, this one is 38GB, was 44GB until the temp files & restore points except the last were deleted.
Best of Luck,
Cat

Snow Leopard problem with Mail, iPhoto, EnergySaver (in system preferences)

My Mail crash immediately every time I open it. same goes to my iphoto 8.1. and the Energy Saver, deskstop & Screen saver (in system preferences) also have error
this is what it says when I open the mail app.
Process: Mail [602]
Path: /Applications/Mail.app/Contents/MacOS/Mail
Identifier: com.apple.mail
Version: ??? (???)
Build Info: Mail-10750000~1
Code Type: X86-64 (Native)
Parent Process: launchd [174]
Date/Time: 2009-09-11 05:25:07.189 +0800
OS Version: Mac OS X 10.6 (10A432)
Report Version: 6
Interval Since Last Report: 12193 sec
Crashes Since Last Report: 302
Per-App Crashes Since Last Report: 47
Anonymous UUID: 187906D5-97F3-4016-AA57-07AC6900142E
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/iLifeM ediaBrowser
Referenced from: /Applications/Mail.app/Contents/MacOS/Mail
Reason: no suitable image found. Did find:
/System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/iLifeM ediaBrowser: unknown file type, first eight bytes: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Model: MacBook4,1, BootROM MB41.00C1.B00, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.31f0
Graphics: Intel GMA X3100, GMA X3100, Built-In, 144 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.91.19)
Bluetooth: Version 2.2.0f18, 2 service, 1 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST9320325AS, 298.09 GB
Parallel ATA Device: HL-DT-ST DVDRW GSA-S10N
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8501, 0xfd400000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x1a100000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0229, 0x5d200000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000

Your problem is the iLife Media browser which all these app use to link into the iLife apps, and which iPhoto needs to run:
Library not loaded: ...
... Reason: no suitable image found.
Try re-install iPhoto and then run Software Update to bring it all to current versions.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only...’
Regards
TD

Problems with my 5.1 surround system

Similar Messages

Maybe you are looking for