Problems with setup wizard

Hey I just got a blackberry curve 8520 and when i try to set up my email address the only option that comes up is the "I want to use a work email account with a Blackberry Enterprise Server" and I need the first option due to the fact that i dont have the enterprise password. What should I do?

Hi paulina01,
I would advise contacting your wireless provider to verify that you have the correct data services for personal email.
Thanks,
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Similar Messages

PI 7.11 problem with configuration wizard

hello guys,
during the configuration wizard to use PI functionalty of my PI system I receive a massage regarding the not correct registration of my system into SLD
ABAP technical system 'SID on HOSTNAME\SID' not found . But it's correctly in the abap technical systems.
What could be wrong? Is it related to the fact I performed a NAMED INSTANCE installation with MSSQL ?
anyone of us had the same problem?

Hello Bruno,
Please follow the MANUAL wizard from the link below:
http://help.sap.com/saphelp_nwpi71/helpdata/EN/a0/40084136b5f423e10000000a155106/frameset.htm
Perhaps the automatic wizard could lead to a lot of problems.
It should solve the issue with the wizard.
Regards,
Caio Cagnani

Problems with Setup.exe LMS3.2 on Window 2008 Enterprise Sp2 32 Bit

Hi,
I have problems installing LMS 3.2. I get the following error during the installation process:
I already deactivated Windows Defender and DEP. After the Error the Installation finishes successfull. You can log in with the given credentials but when you are forwarded to the portal after login the browser shows "Page not Found".
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin-top:0cm;
mso-para-margin-right:0cm;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0cm;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}
Problem signature:
Problem Event Name:                        BEX
Application Name:                             setup.exe_InstallShield
Application Version:                           15.0.0.603
Application Timestamp:                     4a030a42
Fault Module Name:                          ErrStack.dll_unloaded
Fault Module Version:                        0.0.0.0
Fault Module Timestamp:                  4a1c4e04
Exception Offset:                                02ac26a0
Exception Code:                                  c0000005
Exception Data:                                   00000008
OS Version:                                          6.0.6002.2.2.0.274.10
Locale ID:                                             1033
Additional Information 1:                  b2be
Additional Information 2:                  82109204b3973566ace818217390e302
Additional Information 3:                  9025
Additional Information 4:                  5466bb6e3df7ad4e5cd4fca294d8db3a
Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
Regards
Mathias

This looks like CSCte84743.
Symptom:
Installation of CiscoWorks LAN Management Solution fails when the installer is trying to configure CiscoWorks Assistant. The error seen will be related to OpsConfUpdate.exe:
The application has failed to start because GGShared.dll was not found. Re-installing the application may fix this problem.
Conditions:
This can occur on Windows 2003 and 2008 servers. The underlying root cause is still not known.
Workaround:
Configure the following registry key value:
HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\Installer\DisableRollback : DWORD : 0x00000001
Then, a clean installation of LMS should be performed. Once LMS is installed, this registry key value should be removed.
However, the problem with the page not found error could be CSCtb17186. If you try Firefox and get a redirection error, then that would confirm this bug.

SOLVED - Problem with setup online accounts

Good day,
I'm trying to setup gtalk on empathy, but I have a problem with adding me to online accounts. I just can't click to add account. It's inactive. Screenshot.
Do you have some advice for me?
Thank you!
Last edited by E_user (2012-07-16 09:42:21)

You might want to edit the thread title to something more descriptive.

BIG problems with setup after Archive and Install

It all began when I was preparing a G3 iMac to be used - as a trial - by a Windows user. I wanted to preserve the existing accounts so created a new user. I then forgot the new user password (didn't write it down, did I) and had already set it up to go straight to the login screen on boot. Do you think I could then remember the user name of the original account(this time I knew the password)? I researched and was able to set up a new password for the System Administrator via the Install Disk, and hoped that it would show me the existing user names - it didn't. Despite my best efforts, I was still unable to login. By this stage, the gremlins were really getting to me.
I then decided to do an Archive and Clean Install - after I had repaired disk permissions, disk etc. So far so good, as everything seemed to go OK and the Mac restarted and presented the Welcome screen and I proceeded with setup, like it was a brand new Mac.
After going through the first couple of screens where Apple collects information and moving onto where you can start setting up accounts, the thing just hangs with a blank screen with a grey horizontal line about two-thirds down prior to actually reaching this account setup stage. In spite of every other attempt, I just cannot past this stage. Truly weird.
Next, I upgraded my Firewire Disk from OS9 to OSX using the same installation disks and everything went swimmingly, including the creation of accounts. I have been able to boot normally from this Firewire disk and can see everything on my internal HD. I tried reinstalling the OS again - it still hangs in exactly the same set up stage - "siiigh". I'm now getting seriously ****** off with this process and have more or less decided to clone all the appropriate files from the internal HD, erase the drive and start all over again!
I really don't want to go to this level, and besides, I'm really curious to find out what on earth has gone wrong, and hope forum members can help me out here. I appreciate all responses..... Thanks
PatM

BDAqua wrote:
Seems the HD is bad, but whether it could be fixed by Erasing and using the Zero Data Option, once... only time will tell.
IDE HDs don't last all that long... 4 year old ones make me hold my breath!
Thanks for your reply. If the internal drive is bad, why didn't it show up when I ran Disk Utility repair? I don't think I'll try to resurrect it now if that is a possibility.
I had thought of swapping the drive in the Firewire case into the iMac and vice-versa. I have to say that this G3 has now been replaced by a newish MacBook - chiefly to preserve using Tiger (with Classic support) for all the legacy items that my partner was using on the G3. My partner's 91 y.o. mother will be visiting from Perth (the other side of Oz from us) and loves using the Mac, so I now propose the following:
1. Retrieve critical files (if any left) from the G3 internal HD;
2. Swap the drive as above - mind you, I've never changed an HD in an iMac, but after 20 years of mucking around with all sorts of Macs, fancy my chances here - especially as I come from the READ THE MANUAL school of support.
3. Buy a new IDE HD for the Firewire case, load it up with troubleshooting apps. which would then give me a tool for looking after our other Macs.
Any other suggestions?
PatM

Please Help... Problems with recovery wizard

Hello,
I got a Toshiba A205-S5804, as long as it was used I'd erase all from the hard disk with the recovery disk. The problem know is when I try to run the recovery disk it gives me a message:
ERROR 08-064B-000
PARTITION CREATION FAILED
And then the computer shut down.
Please help me

A "Partition creation error" sounds like a hard drive problem. See if you can partition and format the hard drive with a different program or operating system. If you can't, it is a hard drive issue. If you can partition the hard drive with some other software, then it maybe a problem with the Recovery CDs. You can order new Recovery CDs at Toshiba's InTouch Center at 800-457-7777.

Problems with setup password for WRT54G.

I connected the router and everything, the LEDs come on fine and it seems to be ok. But when I get to step eight in the setup wizard, it configures some stuff and a window pops up asking me to enter a password. I wasn't sure what to put in, so I put in a personal password and it thought about it, but it popped back up. So I tried some other could be passwords, but the window kept popping up.
So I'm not sure what I'm supposed to do at all. Help, anyone?

Enter the routers ui manually by opening your browser from a hard wired pc and typing in http://192.168.1.1 in the address field. That should open a window asking for the user/password. By defualt the user is lefft blank and the password is admin unless you have already changed it. If so enter your password and if you can not get into the ui then hard reset the router by pushing/holding the reset buttom for at least 30 seconds. Then go back and try to access the router like I stated above. Once you get into the router ui you can configure it to use your ISP and make sure you have the latest firmware installed by checking which version your router has and what version is on the Linksys web site.
Richard Aichner (Ikester)

Problem with Dunning wizard

After the excution of Dunning wizard, I get the following error :
18/03/2009 19:06:51: Could not commit transaction '' (DWZ2)
Now,
I don't see the register dunning transaction, but all the business partner has been signed has dunned.
I need know to understand what is my problem and this error, and to restore back the situation to the time before the error.
Giuseppe

HI,
The error message is typically caused by approval procedures. Could you
please ask the customer to try the following:
1. Check the approval templates.
2. Log on with the approver user (designed approver in the template).
3. Go to the Approval Templates Setup window, Terms tab.
4. If the radio button 'when the following applies' is checked, please
check if any box was checked on the 'Choose' column and if the Ratio
'Undefined type' is selected. If so, either select a ratio and define
a value, or uncheck the box.
5. Check the last line in the Terms tab ('Undefined type') and make sure
it is not checked.
6. Click on Update.
If the above does not solve the issue, then this may be related to Note
1258519 which is an application error fixed in 2007A, P44.
Also there is a workaround on the Note 1258519.
Regards
Vikas
SAP Business One Forums Team

Problem with payment wizard

Hi Experts,
a customer of ours encountered a strange problem while using the payment wizard.
Testrun was successfull, the real run threw an error with the following message:
If you restart SAP and start the run again, it works perfectly fine.
Anyone an idea what it could be?
Thanks and kind regards
Teresa

I dont have the possibility to get it in English, but I can try to translate.
"number of occurrence of node "MsgId" is outside range "1" to "1"
PmtInf - Number of occurrence is outside range "1" to "infinity"
XML schema error: element "GrpHdr" in namespace 'urn:iso:std:iso:20022:tech:xsd:pain.001.002.03' got an invalid inferior element 'CreDtTm' in namespace (see above).
Expected list of possible elements: 'MsgId' in namespace (same as above).
XML schema error: content of element 'CstmrCdtTrfInitn' in namespace (same) incomplete. Expected list of possible elements: 'PmtInf' in namespace (same).
Internal Plug-In-Error
Error of calling up the Plug-In..'

Problem with setup table fillup

Hi,
I wish to extract data using the business content Data source 2LIS_02_HDR( Purchasing). I have activated the extract structure and all other necessary steps. I have deleted the setup table. When I fillup the set up table I get the error " No Extraction structure is active or no BW is connected". I checked with basis guy regarding the connectivity which is absolutely fine. Please let me know in case you have faced this kind of problem before.
Thanks in advance,
Tapan

hi,
oss note 914268-No extraction structure active or no BW connected
Symptom
Within an instance, you use the NetWeaver components of SAP ERP and BW.
When you execute transactions like to fill rebuild tables in Logistics, the system issues the termination message M2 630:
No extraction structure active or no BW connected
The connection test and the settings for the Myself source system are definitely correctly maintained.
Other terms
OLTP, extractor, data extraction, DataSource, API service, SAPI, RSA2_SERV_BW_CONNECTED, OLI1BW, OLIZBW, OLI3BW, OLI9BW, 2LIS_XX_XXX, M2630, SBIW, LIS, rebuild
Reason and Prerequisites
The problem is caused by a program error.
Prerequisites:
Within an instance, you are using the NetWeaver components of SAP ERP and BW. Thus, potential data loading processes are executed by using the Myself source system connection.
No other BW system is connected for data as a target system.
Cause:
Prior to NetWeaver, you could not operate ERP and BW in one common system. For this reason, the case that Logistics data need to be loaded into the same system for BW functions was not considered. The system as "source system" does not recognize that the system is connected as a "BW system".
Solution
To correct the problem, you need Service API 7.00 Support Package 08 or PI 2004.1 4.6C Support Package 13 in the affected source system. The attached composite SAP note informs you on which software components contain Service API 7.0 and lists the corresponding Support Packages of these components.
Alternatively, implement the attached program corrections.
In the BW system, you only need to implement the correction if the BW system is affected in its role as a source system for itselt (myself connection) or for another BW system.
Caution: Service API is an internal component. Therfore, it is not delivered separately but as a part of other software components: PI, CRM, PI_BASIS and several others. Thus, a composite SAP note is created for each SAPI correction note. This composite note describes which Support Packages of the above mentioned software components contain the SAPI correction. However, the composite SAP note will only be released when the corresponding SAPI Support Packages are released.

80 Problem with setup

I downloaded iTunes and connected my 80gb iPod classic, and now I'm seeing a page entitled iPod Software License Agreement. I read the agreement and clicked a checked box saying that I agree to it, but I can't scroll right to continue the setup process. Anybody have this problem or know how to fix it?
Message was edited by: dafisch
Message was edited by: dafisch

Ok - this is more of a rant than anything useful so beware! It seems that Apple has taken a page or two from the banks, insurance and health care providers which is to stick your customers at every opportunity.
It's a day after christmas and, surprise!, my friend can't use the new $350 ipod classic I got her on her OS 10.3.x machine. So let me state the problem just to be clear and in case I've gotten anything wrong you all can correct me:
The company that prides itself on designing products for the 'rest of us' (read: idiots that don't know how to set the clock on a microwave, much less use a computer) has decided that what is essentially a portable hard drive needs an OS upgrade to function correctly. I'm sorry is there something in that split screen display on the new ipods that requires 10.4 to run properly?
Wait, wait! I'm sorry, silly me - it's clearly buried on the website that >10.4 is required to operate a, ahem, 'classic' ipod. It probably says that on the box too (in equally small type). It really isn't too much to ask to take a moment out of the holiday pushing and shoving and spend some time squinting at 8pt type (grey on black!) and try and figure out if it your walkman will work with someone else's computer. The miracles of christmas! You know - I'll bet if I hook up my old tape walkman to the line out jack on her laptop that would work!
So decisions, decisions. Do I scramble around and source a copy of Tiger (can you find that for power pc anymore) or just buy a new laptop? Please help!
Remember folks:
1 - Always get a referral
2 - No more than 3oz of any liquid and recheck your duty free purchases
3 - Pay off that balance transfer before the rates reset
4 - A portable, personal audio device is not necessarily portable in every sense of the word!
Thanks for listening.

Problem with Wlan Wizard

I have an N85. Sometimes when I want to connect to Wlan network through Wlan Wizard , my device becomes restarted. Please help me

Hi,Try this
Wireless LAN connection problem can be cause by a firmware failure and can be easily be fix by restoring, updating the phones firmware again. But after doing any firmware repair and the problem still exists the problem may certainly lies on the hardware components failures.Try updating your phone
PRANAVCR7

Migration from Access to Oracle 10g (Problem with migration wizard)

Hi
I have an access database which I want to migrate to Oracle DB.
I have created 2 connections.
1. Access connection with the source database
2. Oracle connection.
I have associated the oracle connection to the repository.
When I go through 'MIGRATION WIZARD' process. I am not able to view the source database file while capturing. Tried it several times.
Need a help in this
Regards,
Arjun
Edited by: 919650 on Mar 9, 2012 2:47 AM

Arjun,
you cannot do an online migration with MS Access as you can do with other foreign datasources. You can only do an offline migration.
The first step that you need to do is to call the Microsoft Access Exporter. Click on Tools - Migration - Microsoft Access Exporter and chose the exporter of the MS Access version that you are using.
The exporter creates an xml file for you. After the exporter has finished you can do the migration, click on Tools - Migration - Migrate, but in Step 4 please select "Offline", and then you can select the xml file that the exporter has created. The following steps in the Migration assistant are then doing the migration for you.
You might also want to read the chapter "Before Migrating From Microsoft Access" in the online help of SQL Developer.
Regards
Wolfgang

Problem with Setup Assistant and New iMac

I just purchased a new imac intel (actually 2010 model from MacMall on closeout) and I want to transfer my files over from my old imac - 2004 G5 running 10.5.8
During the initial start up of the new imac I choose the option to transfer my information from another mac (using setup assistant).
I connect using firewire and start up the old mac in firewire mode (holding down T). After the new mac calculates the files to tranfer I cannot chose the continue button - the button is greyed out. In addition the remaining space available shows a negative (red number). This also occurs if I choose to transfer from a time machine back up on an external drive. Help.

You didn't mention what version of OS X is on the new system. I would strongly recommend starting over and using Pondini's
Lion Setup Assistant tips
or
Snow Leopard Setup Assistant tips
depending on what the new system has loaded on it. If you have been using Time Machine or a bootable clone backup for the old system you can restore from that backup rather than having to mess with Target Disk mode.
If you still have difficulty call AppleCare, they're there to help on this type of issue. The number is in the owners manual.

Why is there a problem with Setup.exe when upgrading from 2.0 to 3.6.3?

I am trying to upgrade Firefox on a laptop that currently has 2.0. I downloaded 3.6.3 and opened setup. I get an error message indicating that setup cannot run setup.exe. It advises I restart my computer. When I do, it does no good. Please advise.
== This happened ==
Just once or twice
== I tried to upgrade from 2.0 to 3.6.3.

Firefox 2.0.0.20 is the last ever version of Firefox for Win98 / SE / ME.
You can try KernelEx to get Firefox 3+ to work, but it would be very slow with an old PC of less than 750Mhz.
http://sourceforge.net/projects/kernelex/

Problems with setup wizard

Similar Messages

Maybe you are looking for