Procedure To Enhance BDoc : BUPA_REL

All,
I'd like to know the steps (in detail) involved in enhancing the BDoc: BUPA_REL. Typically, I'll be synchronizing data between SAP CRM and SAP R/3 systems whenever there is a change in the BP Relationship screen.
Regards,
Ravi

Hi Martin,
Here is the steps to debug the BDoc from one system to other.
1> Go to Tr. SMQS and deregistor the R/3 System .
2> reprocess the BDoc is Tr. SMW01, and you will see one stopped queue in the CRM outbound Tr. SMQ1.
3> Press the debug button and you will find yourself in R/3 system and from here onwards you can debug the R/3 inbound.
Do not forget to registor the R/3 system which you have deregistor in step 1 otherwise all the queues will get stuck in CRM outbound.
<b>Reward points if it helps!!</b>
Best regards,
Vikash.

Similar Messages

Procedure For Enhancing BDoc : BUPA_REL

All,
I'd like to know the steps (in detail) involved in enhancing the BDoc: BUPA_REL. Typically, I'll be synchronizing data between SAP CRM and SAP R/3 systems whenever there is a change in the BP Relationship screen.
Regards,
Ravi

Hi, Andrew Clarkson
1630644 - No validity period in standard contact person relationship
This is SAP standard behaviour
Due to technical reasons, the partner function assignments are not time-dependent and the validity period of the contact person relationship cannot be considered by the automatic partner determination in the CRM applications. Therefore the maintenance of the start and end for the contact person relationship in CRM is deactivated in the standard system.
A possible workaround is to use a customer-defined relationship category (copy of standard), which can be customized without any limitations.
Regards,
Denis

BP im multiple sales org :BDoc BUPA_REL   error

IN CRM we have a sold-to BP maintained in two sales org 1000 and 2000 and its
                                 ship-to maintained only in 2000 sales org                                 in CRM system ( CRM 5.0 )
Those are replicated to ECC
(   I used FM BUPA_MWXT_CREATE_MAIN_BDOC to replicate BP to ECC ...
it worked fine ... sold-to created in 1000 and 2000 and ship-to are crated in 2000 sales org in ECC . )
Now I'm trying to replicate the BP relationship to ECC using FM 'BUPA_MWXT_CREATE_REL_BDOC'.
At this point BDOC BUPA_REL is giving error as
: Customer XXXXXX (SHIP-TO) has not been created for sales area 1000.
I know ship-to is not maintained in 1000 sales org ...but I want the relationship to be maintained for 2000 sales org .
How can I acheive this?
By using 'BUPA_MWXT_CREATE_REL_BDOC' I want to maintain relationship only for 2000 sales org.??
Let me know if you ar not clear wiht the question
Edited by: aday rao on Sep 16, 2009 11:13 PM
Edited by: aday rao on Sep 16, 2009 11:18 PM
Edited by: aday rao on Sep 17, 2009 9:40 PM
Edited by: aday rao on Nov 2, 2009 10:09 PM

In my case I was trying to create a sales rep manually and when I did that
no 'Personeel number' (BP- Employee Role -Identification Tab) was getting assigned to it, hence the error.
Check for the value in this field for the BP which is throwing the error.
Table - BUS000EMPL
Field - EMPLOYEE_ID
Reward point , if info helps.
Regards
Pallav

BDoc BUPA_REL error in the initial flow.

Hi,
We are using ECC 6.0 and CRM 5.0 due to some reasons we performed CUSTOMER_MAIN and CUSTOMER_REL initial loads.
we are facing many BUPA_REL Bdoc errors with msg: Department has not maintained.
Customers with Contact person will have a department in CRM system (Relationship).
When we check the BPs Contact person, the department is maintained.
1. Why this error comes even though the department is maintained?
how t solve this error? Please suggest.
Regards,
Fedor.

Hi,
Also check if the department which you are entering in Customer contact person in ECC also exist in CRM config (SPRO) under contact person-->Define department.
Regards,
Chandrakant

BDoc BUPA_REL

Hi,
I am sending a BUPA_REL BDoc from CRM to R/3
Is there anyway I can debug the BDoc being processed in R/3. As there is an error being generated and I need to find out why.
Thanks
Martin

Hi Martin,
Here is the steps to debug the BDoc from one system to other.
1> Go to Tr. SMQS and deregistor the R/3 System .
2> reprocess the BDoc is Tr. SMW01, and you will see one stopped queue in the CRM outbound Tr. SMQ1.
3> Press the debug button and you will find yourself in R/3 system and from here onwards you can debug the R/3 inbound.
Do not forget to registor the R/3 system which you have deregistor in step 1 otherwise all the queues will get stuck in CRM outbound.
<b>Reward points if it helps!!</b>
Best regards,
Vikash.

Unistalling procedure of Enhanced Gmail Plug-in ??

Hi,
How does one Unistall the Enhanced Gmail Plugin, because i did a Security wipe on my 9790, and though all the emails are no longer visible elsewhere, when i go to Setup/Email Accounts, i see that the Gmail plugin is still showing me all my email addresses and asking for password and does not let me do anything there.
Regards
Bikram Grewal
Solved!
Go to Solution.

hello,
if I recall correctly, you can at most deactivate it, but not uninstal it?
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

BUPA_REL bdoc error

Hi,
In SMW01 i can see some BUPA_REL bdoc which are in error state and some are in intermediate state(I04).
For the failed bdoc error showing are
1. Service that caused the error: /1CRMGC/CONGEN_OBJ_WRT_CDB
2. Technical error occured: Service , BDoc type CONGEN_OBJ_WRT, Message Select for Update failed: Update error in table SMOKVBEZ7: row SFAKVBEZ7=49B.
3. Service that caused the error: BP_REL_CRM_TO_CDB
We are using Mobile Sales also and hence i have checked the Tcode SMW3FDCUST for bdocs BUPA_REL the Active checkbox is marked but Mobile Bridge is unchecked.
Also i can see everyday many BUPA_REL bdocs are successfully processed without any issue.
Can anyone tell me how to process those failed and pending bdocs and what would be the issue.
Regards,
Shobhit

Hi Shobhit,
I have applied the note 1528032, this is a manual correction. I have copied the correction from this note for your reference.
The function module BP_REL_CRM_TO_CDB is only relevant for the mobile scenario.
Since you are not using the mobile scenario, the FM should not be called.
Check in Transaction SMW3FDCUST for the BDoc Type "BUPA_REL" and the Function Name BP_REL_CRM_TO_CDB.
Remove the 'X' from the active field for all of these entries.
By unchecking this field the data will not be sent to CDB.
Please note that the mobile bridge is active once the 'active' flag has been set - even if the 'mobbridge' field has not been filled.
Thank you and Regards,
Niranjan

Debugging the BADI Enhancement while running XIF

Hi gurus,
I am currently trying to modify some data in the Inbound BDoc BUPA_REL (Business Partner Relationship) using the BADI CRMXIF_PARTNER_R_MAP with method CHANGE_MAPPED_DATA_IN.
Unfortunately I am trying to debug without sucess. I tried to follow the procedure described in Note 591691.
How shall I proceed to debug this Badi?
Thanks in advance

Hi Gabriel,
It is generally you put an External Breakpoint on the method and while executig you Bdoc the debbuger should stop,
In case you are still not able to achieve this there is a an out of box option that plaese re install your SAP GUI, coz i have seen in certain instance that the debbugger starts working.
Regards,,
Pranay
Do rewrad Points

How to enhance the standard search with custom field?

Hi all,
I would like to know the general optimal procedure to enhance the standard searches like Opportunity search or Lead search.
I've gone through some of the threads here. Some suggest, to add the new field using AET and copy the IMPL class of the search and then code the custom logic. Some say, append the new field to the structure of the search object and then implement the BADI.
I'm actually a bit confused to understand the correct procedure.
Can someone please help me with a generic procedure to enhance the standard search with a custom field?
Thanks in advance.

Hi Maren,
Once I have got the same development. I have followed the below steps, please check with this. Let me know for further inputs.
Add new field using Append structure of type ‘XXX’ in search
Create BADI implementation for Enhancement spot ‘ES_CRM_RF_Q1O_SEARCH’ and include filter ‘BTQOPP’
Put your logic in BADI implementation – SEARCH method
Add it in WebUI configuration
Remove the operator if required
Regards,
Swadini Sujanaranjan

How to enhance 2LIS_02_SCL with Conditions

Dear Gurus,
(PLEASE.... THIS ONE IS REALLY AN URGENT ISSUR)
I have a situation here, where i have to enhance my Purchasing Data Data Source(2LIS_02_SCL) with the conditions from MIRO.
Here in our project at the time of creating a PO they enter the Freight value and the Condition thpe along with the Transporter. But all the above said data is tentative it may be changed at the time of MIGO which is also not a permanent one. But what ever the data entered at the time of MIRO(Invoice Verification) is the final one. so i have to pick the data from this transaction. If anyone went across this situation please suggest me what should i do to enhance my data source with this data.
Here i have to extract the Transporter, Station, Freight Value, Condition type. Please tell me the table information also. If the information i provided is not enough please feel free to ask for more.
IF THERE IS ANY OSS NOTE WHICH CAN SOLVE MY PROBLEM PLEASE FORWARD THAT TO MY YAHOO ID.
[email protected]
Thanks in advance
Mohan Kumar

Hi Mohan,
Please go through the steps.
1) SE11, Type your ES in Data type ,and click on display
2) Click on append structure , create the new append structure and add the new fileds,Then activate it.
3) RSA6,select your Generic DS,enter into data source screen with change option. Make sure that the "fiel only" and "hide" options are unticked for newly added ields.and then generate the DS(menu option).
4) Replicate the DS.
5) Write the code in CMOD for newlu added fields.
Procedure:-
the enhancement depends on the type of datasource. Mostly you identify the extract structure and add your fields using a append structure. Once enhanced, you need to generate the datasource again. Then goto transaction cmod, create or choose a project, add enhancement rsap0001 and add your coding in exit...001 for transactional data, exit...002 for master data, exit...003 for texts and exit...004 for hierarchies.
after the extract structure displayed, click 'append structure', and system will propose the append structure name 'z....', accept it and in next screen add you new field name as zz.... and activate the structure.
double click component exit..01, double click zxrsau01, system will give something 'sap reserved' which actually just warning, quite tricky, just press 'enter' then it will go to next screen for program include zxrsau01.
here you put the code like following :
data : l_s_[structurename] like [extractstructure name],
l_tabix like sy-tabix.
case i_datasource.
when 'your datasource name'.
loop at c_t_data into l_s_[structurename]
l_tabix = sy-tabix.
fill the new field
select ... into l_zz...
where ....
l_s_[structurename]-[new field name, zz....] = l_zz...
modify c_t_data from l_s_[structurename] index l_tabix.
endloop.
I hope it would help you.
Regard's
Prasad

BUPA_REL: Custom Function exit

Hi
I'm replicating BP in CRM as Vendor in ECC.
When a BP and its relationship is created in CRM, the following BDOcs are generated: VEND_MAIN, BUPA_MAIN & BUPA_REL.
To extend the Vendor to a particular company code and update couple of fields for vendor (Recon Acct, Tolenrance grp, withholding tax details), I'm using CUstom FM "Z_V_SAMPLE_INTERFACE_DE_DALE". DALE being BTE for vendor creation.
Now the issue is with relationships. The BDoc BUPA_REL is triggered. I need to add these partners as "Permitted Payees" of the Vendor.
Can anyone shed light one how execute custom logic for BUPA_REL like any function exit, or BTE exit.
Thanks in advance
Cheers
/Arun

Hi,
Thank you for your answer.
I checked FM CRM_UPLOAD_TRIGGER which is called in ERP when BDoc arrives from crm. Here the Z-field is available. Later on when FM PI_BP_PROXY_BAPI_CUSTOMER is called, it is lost. The problem is in FM PI_BP_BAPIMTCS_TO_REL. Here the Z-field is available in bapimtcs structure, but there is no processing of the custom fields here (of course - it is a standard FM which processes the standard part of BUPA_REL BDoc). However I did not find any user exit at this point.
I have to update field KNREF from table KNVP of the particular relationship.
Any advice how to do that?
Regards,
Desislava

How to enhance OM infotypes

Hi experts can any one tell me how to enhance OM Infotypes. I mean to say what is the Tcode? i think it PPCI is it correct ? and what is the procedure to enhance the OM infotype? if possible explain with an example.
Thanks in advance.
vamsi.

Hi,
Tcode PPCM is used to create OM infotypes.
Give the infotype no. & create the CI include first & then All button.
Hope this helps.
Thanks,
Sarika.

BADI to populate CRM BDOC

Hi all,
I want to transfer condition records from CRM to R/3. To do this we enhance BDOC type:CRM_MKTPL_MKTELEM by creating new child segment with additional fields. We need to populate these fields. How do we find out the BADI to populate these fields?
Its very ugent!!
Thanks in Advance!!

Hi Ntk,
Thanks for your reply.
I tried to search in se18. I found one BADI that runs when users enter new materials or changes the quantity of the sales order.
This one does not help us too much, because when you go to conditions tab (into CRMD_ORDER or via ICWEB) all conditions are redetermined with the pricing determined in IPC.
We want to fill the conditions of the sales orders or the sales quotations at running time. In the BADI we would use the function module RFC SD_SALESDOCUMENT_CREATE (in simulation mode) in R/3 and retrieve all conditions fields and then populate the pricing conditions in CRM.
Do you know any BADI with this behaviour? Or another similar?
THANKS!

Enhancing HR Extractors

Hi Gurus,
I am getting into a HR project where we have to enhance some of the HR data sources (Benefits, PA, time and payroll). i want to know the procedure to enhance HR extractors. Is it the same as other datasources or do we have to do different when handling cluster tables?
normally we append fields to our extract structure and write code in cmod is it the same for HR datasources?
can someone give me guidence or necessary steps to be taken when enhancing HR datasources especially when handling fields from cluster tables?
would be great help
Pallavi

Hi,
It is same for HR too.First append structure adding new filed that you need then feed this with code in cmod.Please check the link below that is showing HR datasource enhancement.
How to enhance 0HR_PT_2 DataSource.
Regards.

CRM Middleware - BDOC Class

Hi All,
I am creating a new BDOC from the transaction SBDM. By default the selected BDOC Class is 'Messaging'. I want this to be 'Synchronization ( Write )'. But this is disabled. In fact all the radiobuttons for the BDoc class is input disabled.
Can anyone please let me know what could be the reason for this?
Thanks,
Shankar

Hi Shankar,
Can you please help me with the step by step procedure to create Bdoc. It would be great help from your side. you can also send in some document to [email protected] in case you have any.
Thanking in Anticipation.
Regards,
Amit

Procedure To Enhance BDoc : BUPA_REL

Similar Messages

Maybe you are looking for