Process not picking up my control

Hi
I have a process that runs some sql
insert into test
(test)
values (:P28_SS_ID);
and it is not picking up the value in P28_SS_ID
there is a definately a value in there
anyone any ideas why?
Thanks in advance

sorry no idea, it just started working
ill get use to this system one day

Similar Messages

AP - Payment Process not picking up Invoices

Hi All,
I am running the payment process from AP(Payments Manager).I have created 5 Invoices on 12-Dec-2013 and have attached the Pay Group. Once i run the payment process with the pay group none of my invoices has been picked up for processing.I have given the date range from 01-Dec-2013 to 13-Dec-2013
Please help i need close this task ASAP
Regards

Hi,
What are the payment terms on the invoices? If these are not IMMEDIATE, and the payment is not due, the system would not pick them up until they are due.
What is the payment method on the invoice and in the PPR? Are you running the PPR for electronically paid invoices but the invoices are set to be paid by check?
Are there any holds on the suppliers you are trying to pay?
What are the other parameters you gave when running the PPR? It helps to check those against the invoice to make sure they would qualify.
Information about the pararameters you are using and one of the invoices to be selected would be helpful.
Cheryl

Parameter Passing between pages- process not picking up on changes

Hello, new user, this is a different question than before.
I have a drop-down list box on Page 1, upon which the user can choose a study number. The List Box is named "P1_STUDY_NBR".
Then I have a list, one entry of which goes to my master-detail form, which is Page 6. I would like it to go to the study number that the user choose on Page 1.
In my target on the create/edit list entry, I put in "Page in this Application", "Page 6", then in Set these items, I put in
P6_STUDY_NBR
My question is what to use in With these values, where I want the contents of the P1_STUDY_NBR. I tried:
&P1_STUDY_NBR.
Now I've got it passing to the master detail form, but it passes whatever was the first value! i.e, if I set the default of the drop-down list box to 336-00, then it opens the form with 336-00, and if I set the default on the drop-down list to 005-07, then it opens to 005-07.
However, if I change the value in the drop-down list box to something else, then press the link in the list to go to the page, then it doesn't pass the new value like I want (it passes whatever was the default value).
Is there something that accepts the new value into the variable upon the change in that drop-down list box that I need to add to my processes, or why won't it use the new value as the parameter?
-Mary

I'd recommend (re)reading "Understanding Page Processing and Page Rendering" in the Users Guide and then redesigning your page. The problem is that you change the study number list selection in the browser but the change never gets processed because a navigation list link doesn't submit the form, it only navigates away from it.
You could try making the study number list type "Select List with Redirect" which processes the change so that the new selection value gets set to the session state and then returns to the same page.

JConsole not picking up local Java processes

Hi,
Using JDK 1.5.0_06 JConsole is not picking up my local Java processes. I have set the -Dcom.sun.management.jmxremote as an arg to the JVM startup. My Windows username does not have an underscore in it and my default temporary directory is on NTFS. When I run the jps command I see my java processes but I get process information unavailable for each one except the jps command.
Anybody have any ideas as to what else I should look at.

Found the answer I was looking for - What a pain - http://forum.java.sun.com/thread.jspa?threadID=730397&messageID=4308804

Mid-process Receive (onEvent) is not picking up published event

We have a composite (CompositeA), which has 2 BPEL processes (bpelprocess1 and bpelprocess2). bpelprocess1 is synchronous and bpelprocess2 is a one-way. bpelprocess1 receives a message from the client - then sends the message using a one-way Invoke action to bpelprocess2 - bpelprocess2 transforms the message and assigns some values - then sends the message to Event1 through an Invoke action - bpelprocess1 has a Receive activity waiting for an event from Event1 - then it will send the message back to the client as the Reply. Everything works up to the point where the bpelprocess1 Receive(onEvent) activity is waiting for an event, it sits in this "Pending" state until the SyncMaxWaitTime value has expired and then we get a timeout error (see below).
"Waiting for response has timed out. The conversation id is null. Please check the process instance for detail."
So our question is, why does the Receive(onEvent) in bpelprocess1 never pick up the published event? We've run some additional tests to ensure the event is being published, and that has been confirmed.
Is it possible to receive an event that was published during the current instance of the process (i.e., since bpelprocess1 invoked bpelprocess2 which invoked the Event1 publish, can bpelprocess1 perform a mid-process Receive of the event that was just published?
Please let us know if this makes sense or if you have any additional questions.
On a side note, if we create an independent mediator component in the same composite and have it subscribe to Event1 as well, then just write the message out to a file. It would not pick up the message from the EDN in the scenario described above, if we set the property nonBlockingInvoke=true or bpel.config.transaction=requiresNew on the bpelprocess2 partnerlink from bpelprocess1, the Mediator would get the message from the EDN, but bpelprocess1 still timed out waiting for the event. If we setup another BPEL process (bpelprocess3) in the same composite (though not linked to bpelprocess1 and bpelprocess2) and it has a mid-process receive onEvent listening for Event1, it does not pick up the published event either, so seems to be an issue with the mid-process receive onEvent in the synchronous BPEL process.
Any help is appreciated.

Thanks for the reply, but there is no issue with the one-way from bpel1 to bpel2, we do not expect nor want a response from bpel2, it should just publish the event and complete. The bpel1 should continue it's flow (which it does) and the next action is a Receive action listening for an event (that was published by bpel2), but the Receive never finds the event.
Here's a less complex use case:
1. bpelprocess1 is a synchronous process which publishes to Event1 (this completes successful and returns a success message to the client)
2. bpelprocess2 is an asynchronous process which has a mid-process Receive action that is listening for Event1
3. bpelprocess3 is a process which is initiated by Event 1
If we execute bpelprocess2 it will set at the mid-process Receive action in a PENDING state, waiting for Event1 to occur.
If we then execute bpelprocess1 the Event1 is published and we receive a "SUCCESS" response back.
At this point bpelprocess3 is initiated (b/c it's initial Receive is triggered by Event1)
We would also expect the mid-process Receive in bpelprocess2, which is in a PENDING state to trigger, but it never does.
Hopefully this use case makes more sense.

Process order not picking up a batch...

Hello gurus,
I have created a process order for a mater FIN in which iam using a RAW...but when i create a process order for the FIN and go to MIGO to do a GI, its not picking up a batch of RAW automatically and instead i have to pick a batch manually...
Any suggestions much appreciated
Sri.

HI
1.you have to assign the batch in COR2 for the components.
or
2.you have to use batch determination process
COB1 - is used when you want to do Batch Determination in Production / Process order itself.
MBC1 - is used during Goods issue / Goods Transfer
For doing Batch Determination on the basis of any characteristic you have to maintain sort rule.T.code is CU70.
go with link
http://www.sap-img.com/sap-sd/some-light-on-batch-determination.htm
forum answer
batch determination
-ashok
Edited by: Ashok Keerthipati on Dec 18, 2008 11:24 AM

Control Code from Material not picked in Sales Order after EHP4

Hi Gurus,
We have updated Enhancement Package 4 for one of our client.
It is observed that the system is not picking the values maintained in Control Code of Material master. We have some pricing condition types maintained using the combination of Control Code and other fields, which are not being determined automatically.
The data is maintained in J1ID for this material and plant combination and it is also filled in material master.
Please help.
Thanks in Advance.
Regards
Vamsi.

Hi Vamsi,
We are also facing the same issue after EHP4 upgrade. Please let me know how you have fixed that issue.
Thanks
Rehan Manzoor

Order type is not picking while converison Plnd to process order

Dear Dudes,
i have maintained production scheduling profile in all material masters in which order type is specified. while converting planned order to process order order type is not picking.
thanks in advance.

Robert,
Since you are using same order type for both MTS & MTO, you can define this order type "PI01" in the MRP plant parameters using transaction OPPQ in the Conversion of Planned order section.
I am not sure, why production scheduling profile is not working for you, hope you are using the Production scheduling profile configured using CORY transaction check this part alone.
Regards,
Prasobh

Mac: Firefox software update process will not authorize in parental controlled account-Bug?

OS: 10.7.5
Firefox 20
Parental Controlled user account: Firefox and Firefox Plugin processes are checked in parental controls. No other Firefox processes are visible.
When logged into parental controlled account, user launches Firefox from the Dock. Message appears:
You do not have permission to run Firefox Software Update. Admin required authorization.
Admin clicked Always Allow, entered admin name & password. Firefox would not launch.
Logged out of Parental Controlled account.
Logged in to Admin account.
Launched Firefox. "About Firefox" shows Firefox up to date.
Logged out.
Logged back into parental controlled account.
Firefox opens.
Is this a bug or is there some other reason the admin authorization failed?

I have a student that is having the same issue. Whenever she attempts to open Firefox, either from the dock or applications folder, she gets the permission error. I tried this under an admin account and get the same error, and it will not go past it, even with the admin user/pass. A strange icon appears in the dock for a second and the disappears, but Firefox never opens.
We have around 1600 student laptops in the school and I am seeing this on one of them. I have confirmed that she is running the latest version of Firefox and have tried to clear out the preferences, but there don't appear to be any.
Does anyone have anything useful to add to the conversation? Tyler just doesn't seem to be grasping the issue.

Automatic Process order type not picking in CR01

Hi friedns,
i have created new Production scheduler-030 for plant - 0101 through - CORU and CORY t.codes and we are not assigning the
Prod. sched. profile in Materail master.
Now while creating the new process order through CR01,system is not picking automatically process order type for new production scheduler -030 and new prodction schedulre already assign in material master .
For old Production scheduler-010 process order type is picking automatically for same plant.
Are there any user exit need to update.
Please advise.
Thank you.
Regards.
asuvamsi

Thanks for you reply!!
PLease find the scrren shots.
MM02 screen.
COR1:
Thank you.
Regards
Vamsi

External Microphone Not Picking Up Sound

Hello,
I recently bought a product that works better with an external micorphone headset. This was my first time ever using one with my laptop. When I went through the set up process, the microphone was not picking up any sound and I could not hear anything through the external headset. I tried using both the microphone and headset port as well as different headsets with the same result. The headsets work fine on other devices.
When I use just a plain headset connected through the headset port, I can hear just fine.
I went to Control Panel>Hardware and Sound>Sound>Manage Audio Devices to troubleshoot, but nothing worked. I tryed updating the latest drivers and was told the latest are already installed.
The Product Name is : HP Pavilion dv7 Notebook PC
The Product # (NOT serial number) is : B5R46UA#ABA
The External Mic is called: IDT High Definition Audio CODEC
Please advise,
chriscinthed
This question was solved.
View Solution.

Hi @chriscinthed ,
You can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook. It will also fix the sound.
When performing a System restore please note remove any and all USB devices and the headset. Disconnect all non-essential devices as they can cause issues.
In talking to Rosetta Stone says the headsets for use with there software is for USB connected headphones Plug and Play technology. The other computers you have tried do they have Beats Audio. To enable or disable Beats Audio, press the fn key in combination with the b key. The Jack does have influence on the Beats Audio which might need to be turned off. Then try the Mic.
Did you ensure that you are plugging the Mic headset into the selection for headsets on the Notebook.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Net.Msmq Binding Not Picking Up Messages in Queue as soon as the application pool gets recycled

Hi,
We are trying to implement a wcf service that exposes a net.msmq endpoint. We are running windows server 2008 R2/IIS 7.5 running on a DOMAIN mode.
1. Our service is called service.svc and it is deployed under an application called Test in the default website (application pool running under network service)
2. The url to reach the service webpage is http://machinename/Test/service.svc.
3. We created a private queue called Test/service.svc and we configured permissions for network service to full control.
Now, when the application pool is "alive" the service picks up the messages correctly, but as soon as the application pool gets recycled (because of timeout or any other reason), the service stops picking up the messages, that just sit in the queue until the service starts again by browsing to the service webpage (http://machinename/Test/service.svc)
I know this is a popular question, but I already tried several solutions with no luck (for example, we triedhttp://keithelder.net/blog/archive/2009/06/03/fix-for-wcf-netmsmqbinding-not-picking-up-messages-in-queue.aspx,http://www.codewrecks.com/blog/index.php/2009/03/17/hosting-a-wcf-service-based-on-msmq-in-iis7/,http://social.msdn.microsoft.com/Forums/en-US/wcf/thread/a1df55c4-e642-442a-9057-f0aec278d10c/ and other ones)
Any Help?
If this post is helpful, please mark it as such
Alessandro Cardoso
MVP | Microsoft Heroes | MCT
blog: http://itaustralia.spaces.live.com
http://cardosoalessandro.spaces.live.com

Hi Steven,
I am Alessandro's colleague, I am working with him on these net.msmq issues.
Our configuration includes a transactional queue called Test/Service.svc (unauthenticated,
we shut down all security for the moment...does it matter?) and these attributes on the service:
[ServiceContract]
public interface IService
[OperationContract(IsOneWay=true)]
void ProcessMyMessage(MyClass parameter);
[ServiceBehavior(InstanceContextMode = InstanceContextMode.PerCall, TransactionIsolationLevel = IsolationLevel.Serializable, TransactionTimeout = "00:03:00")]
public class Service: IService
[OperationBehavior(TransactionScopeRequired = true, TransactionAutoComplete = true)]
public void ProcessMyMessage(MyClass parameter)
//Do some stuff here
The service is hosted on IIS 7.5 under an application called Test (so that the full http address of the service is http://machine/Test/Service.svc).
In the configuration (for both client and service) we specified None for the security mode, "true" value in durable and exactlyOnce
The Net.msmq Listener Adapter windows service is running fine under the Network Service account (the same as our application pool)
Is there something we are missing?
Also, can you explain how a transaction not configured properly can create this behaviour? In my understanding the process of delivering a message happens in 3 steps (I remember a nice picture of this the Juval Lowy book):
1) Transaction 1: client delivers message to local instance of msmq. The transaction rolls back if the message does not get delivered.
2) Transaction 2: the local instance of msmq delivers the message to the remote (service) instance of msmq. The transaction rolls back if the message does not get delivered.
3) Transaction 3: wcf activates my service which picks up the message and process it. The transaction rolls back if the service fails to pick up the message or does not complete the transaction (for example, because of an unhandled exception).
The message gets delivered to the service machine successfully, so I am assuming that steps 1 and 2 are executed correctly. If my service was not configured to handle transaction properly, wcf should still activate it and do something with it. Or at least,
if it doesn't get activated at all, this should be the case even when the application pool is well alive and awake, because it should be a configuration problem. Instead, the service works great if the appPool is alive and it never gets activated when the
appPool is sleeping (absolute nothing in the .svclog trace file generated by the service). Am I saying something wrong?

Pricing not Picked up in Billing for one of the BOM items

Hello SAPians,
I have an issue.
A Standard Charge Estimate was created from Service Order.
Invoicing was done on the same day of the Standard charge Estimate. The issue is
There 3 Materials (BOM)-LUMF.   The price at
10. Service item    Rs 0.00    TAP- (No price)
20. Service Item    Rs 184.00 TAD   (Priced)
30. Service item    Rs 266.00 TAD   (Priced)
total order value Rs 450/.   Total Billing amount Rs 266.00 and NOT Rs 450/.
The error is item at 20 not picked pricing in Invoicing. Pricing analysis in Invoicing shows "Condition record exists, but has not been set" Message 108.
The possibility of User Manually deleting the Condition Type in Billing is reuled out.
Your guidance and suggestions are appreciated
Thanks in Advance

Hi,
Please read the below details of the message 108 and carry out new pricing in the invoice, this will solve your problem:
Condition record exists, but has not been set
This message tells you that the condition record exists, but has not been set in the document. If pricing was carried out again for the document item, then the condition would be set.
There are different reasons for this:
1. The condition was deleted manually in the item condition screen.
2. The condition record was created later. Please note that order processing and pricing have buffer mechanisms. This means that a newly added condition record might only be found after order processing has been left completely and then started again.
If the condition type is used for subsequent settlement (rebate), there may be subsequent updating of business volume (the agreement is is created retrospectively). The document conditions do not contain the condition record, as the condition record was not created when pricing was carried out. Updating of business volume is carried out using special functions for subsequent settlement.
3. When an item was added, the condition record was accessed with key fields other than change time. This could lead to different results in the requirements check at the time of adding and the change time. This can occur when modifications are made.
4. In billing (or when copying orders): Certain condition types were not determined in the source document (this is usually controlled by the pricing requirements). When creating the document, the document flow (TVCPF,TVCPA) is processed using a pricing type that does not redetermine these condition types, although they are supposed to be called via the requirements.
Hrishikesh

TS1363 My computer is picking up my iphone, but itunes is not picking it up. What is wrong?

My computer is picking up my iphone, but itunes is not picking it up. What is wrong?

See section 5 of TS1538: iOS: Device not recognized in iTunes for Windows.
If that doesn't help it may pay to tear down and reinstall iTunes in the following manner...
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

While creating the Transfer Order system is not picking Sale order stock?

Hi All,
In the B2B process the system is not picking the stock from from sale order stock while creating the transfer order? Please suggest.
Summary : Here we are creating the PR in the sale order and STO is created using the same PR to procure the materials from the WM plant to sale order plant. Since here intialy we are moving the stock to our sale order in WM plant and then picking the same. But while creating the Transfer order system is not picking the sale order stock in WM plant.
Regards.

C S Javali
Check in schedule line in transaction flow whether Transfer Req /assembly is checked or not
Regards
Pradeep

Process not picking up my control

Similar Messages

Maybe you are looking for