Product Costs in A/R Invoice don't change after entering new Price via A/P Invoice

Dear Experts,
we are facing an issue with our Moving Average Price and the amount of the G/L Account 5000: We found out today that in case the price we assumed when doing a Goods Receipt doesn't match the price on the A/P invoice and we have sold some of the goods during the time we are waiting for the A/P Invoice, the Journal Entry stays the same on the A/R invoice.
Example.
01.01.2015 - We received 100 Units of Product 1 with a Unit Price of 10 Euro.
05.01.2015 - We sell 50 Units with a Price of 50 Euro. When looking at the journal entry the entry between G/L 1600 and G/L 5000 is 50x10 = 500.
07.01.2015 - We receive the A/P Invoice with the Mail (The date of the A/P Invoice is the 03.01.2015). Therefore we create the A/P Invoice with Posting Date = 03.01.2015. The Price per Unit = 9,50 Euro.
As from a date perspective, the A/R Invoice was later than the A/P Invoice. Nevertheless the price remains on 10 Euro per Piece which is wrong from an accounting side.
I expected that their is another journal which adjust the booking.
Thanks for your help.
Stefan

Hi Stefan,
I think creating A/P invoice with posting date=03.01.2015 would be wrong.
Instead you may create the same with posting date=07.01.2015 and document date=03.01.2015.
Thank You,
JO

Similar Messages

  • Error during PO Change-"Enter the price or set the 'Invoice Expected' indic

    Hi Gurus,
    I am facing this issue in the PO change. Whenever I try to change a PO and check ; system says" No error" but when I order it then I get this error "Enter the price or set the 'Invoice Expected' indicator " with a pop up "Complete Purchase order xxxx first or 'hold' the changes
    This happens for all the POs with any vendor.
    Regards
    Kapil

    Hi Kapil,
    We have got similar issue before while changing the P.O in change mode.
    This generally happens when the P.O is changed after the follow on documents has been created.
    In this case you can delete the change version and then amend the P.O without any issue.
    Generally the 'Delete' button gets disabled once the follow on documents get created but in this case the 'Delete' button would be active and clicking on 'Delete' button would delete only Chnage version and the P.O would be back to original ordered status.
    Please do the changes and let me know in case of any further clarifications.
    Regards,
    Teja

  • Don't want user create new item via VA02

    Hi experts:
    If I don't want user create new item in sales order via VA02,
    how can I do it ??
    Thanks
    Shwan

    This can be done by Roles and authorisation.
    Basis can be able to do the settings in such a way that once the user save the sales order at VA01, he can' t change anything in that.
    THat can only be modified by the authorised person.
    Reward if useful.
    Regards,
    Kaleeswaran B

  • Illustrator cc don't start after the new update

    Illustrator CC don‘t start after I update this. I should loading the font Verdana, but Verdana is activ. What can I do now?

    saure sahne,
    Are all the faces of the Verdana and Tahoma fonts installed and enabled/active?
    Did you receive a message about Verdana?
    Is your OS Mac OSX 10.6.8? If so, you will have to upgrade that or roll back the update. You can see instructions for the latter here:
    http://prodesigntools.com/adobe-cc-version-control.html

  • My PWM don't work after install new cooler...

    Hi...
    I have MSI P55-GD65 and i have a problem... My PWM don't work anymore  
    I had a Intel stock cooler and PWM on this cooler work nice (when is idle speed is about 2000 RPM, on load above 2500 and up RPM), but i buy Cooler Master Hyper TX3 (with 4 pins and PWM control) and now speed on this cooler is 2900 RPM (100%) and don't go up or down depend of temps.
    Just on start when i boot windows speed is nice i guest 2000 RPM (i hear that) but only 5-6 secounds (until boot logo appers) and then go full 100% 2900 RPM...
    I don't change anything in BIOS after installation of this cooler (Hyper TX3). When i see that PWM don't work correctly i go in BIOS and try to load optimal settings, but again don't work...
    Also "smart Fan Control" was disable when i using Intel stock cooler and also this option is disable now...
    Please if somebady know, help me.... Im desperate  

    Quote
    But PWM and Smart Control Speed is not same, right?
    The SmartFan control is the automatic regulation of the PWM signal.  If it is disabled, there is no regulation.  It is that simple.  Set the SmartFan Target Temperature to 55°C and see what happens.
    Quote
    Ok, but with intel stock cooler this option (smart control speed) was disable and my fan speed spin dependly of votage or temps.
    Sorry, but I doubt that what you say is true. 
    Quote
    smart control speed is option for change fan speed dependly of temps
    Yes, and?  That is what a fan is for: keep the processor cool.  If it is cool enough, the fan slows down.  As soon as the temperature is increasing, the fan speed will increase as well until it cools down again.  That is how it is supposed to work.
    Quote
    PWM is depend of voltage, this is my problem....
    PWM is a way to regulate the fan speed (pulse-width modulation).  The PWM regulation method as such has not much to do with voltages but with the pulse width of the regulating signal. 
    What you are referring to is the event that triggers the PWM logic to speed up or slow down the fan.  Tying it to "voltage" (what voltage?) would not make any sense whatsoever.  Of course, a higher CPU voltage will theoretically result in higher temperatures.  However, the BIOS does not know (or care) what kind of heatsink you have installed or how effective it is.  The best way for an effective automatic an regulation is to make it dependend on CPU temperature alone (to treat the symptoms of raised voltage: heat) and that is exactly how it works on your board.

  • Speakers don't work after installing new software

    I have a 2nd gen iPod touch. Before I downloaded the 3rd gen software, the speakers worked perfectly fine. However, basically none of my apps worked anymore and the upgrade was only $5 so I said "Hey. Might as well."
    Unfortunately, I can no longer play any music/sounds using the speakers anymore. Without any headphones plugged in, the volume adjust bar doesn't even show up. The side volume control buttons are unresponsive. I know the thing still has speakers, it just doesn't want to use them! Does anybody know what I am doing wrong?
    thank you!

    I have the same problem... my sound bar works... but no sound... also video starts freezing as well as a few games... restored 8 or 9 times but it still does not work.....

  • External Service Order PO in Product Costing

    Hi,
    We have Sales Order Costing process which is done on Sales Order level. During Sales order creation and save, costing is calculated automatically. Based on Sales Order MRP Run is generated and Production Order is made on the basis of Sales Order. We have requirement of External Service Purchase Order need to be flow in product costing. Already we have done external service order purchase order through production cost center and it has done GRN and vendor invoice. GRN value has flown to production cost center. next step I have doubt. In Costing variant under valuation variant - External Processing strategy sequence is done as "Net Purchase Order Price". What are the other settings are required ?
    So I would request you, please guide me how external service order purchase Order can be shown to product costing ? If I want to show this external po value to costing sheet during sales order costing how it can be introduced ?
    Best Regards.
    Samrat Roy

    Hi,
    I am able to resolve this issue by myself.
    Thanks,
    Prithwiraj.

  • Target costs on Product cost collectors

    Hi,
    we have a problem with target costs on product cost collector.
    For the product cost collectors which are existing from long time, it is not updating target costs as soon as backflushing(Goods issue and goods receipt at same time) is done.
    For the product cost collectors which are created newly it is updating target costs as soon as backflushing is done.
    so we would like to know exactly at what point of time target costs will be updated on product cost collector.
    Thanks,
    Santosh Malisetti.

    Hi Rich,
    After researching little bit we found that its a standard functionality for product collector's not to update target costs until we do the variance caluculation. But there is one special case. When a new product collector is created it will update the target costs when backflushing(GI and GR ) is done, but this will happen during first month only. once this product cost collector has participated in variance calculation process, it will not update the target costs when backflushing is done,
    until it participates in  variance calculation again.
    Thanks,
    Santosh

  • Old material overwritten by new material code in Product cost collector

    Hi SAP Gurus,
    How can I work around if a product cost collector with material XXX has been overwritten by a new material YYY when creating the KKF6N.
    Both material code having the same plant, same orde type,same production version but just different material code.
    When saving the preliminary costing for the product cost collector for material YYY, the system prompted me the order number 700022 which is already existing and created for material XXX.
    By right, this shd not be happened but indeed it did.
    Now when displaying the report S_ALR_87013127 - Order Selection, the report showed the new material YYY was created with order number 700022 but the content of the data was for old material XXX.
    Now my problem is how can I get back the product cost collector for material XXX as the original order number 700022 was meant for material XXX and not mat YYY.
    And also when executing backflush (MFBF) for old material XXX, the error msg prompted as 'content of order 700022: Mat YYY transferred to interface (IMSEG):Mat XXX due to this I can't backflush material XXX.
    Really appreciate your expertise on this urgently.
    many thanks!

    problem due to system bug, have to log to OSS for help.

  • REM Product cost collectors and Production version

    Hi All,
    Can some one pls let me know
    What are the product cost collectors in REM and how to create the product cost collectors ?
    What is the production version and the difference between production version and controlling version?
    Thanks & Regards,
    Bujji

    Dear Bujji,
    A product cost collector is a cost object in Product Cost by Period that collects the periodic actual costs incurred in the production of a material. It can be created in txn KKF6N.
    [Product Cosr Collector|http://help.sap.com/saphelp_47x200/helpdata/EN/08/77ba810a1611d3a6b900104b55d538/frameset.htm]
    [Product Cost Collectors: Collective Entry for Repetitive Manufacturing |http://help.sap.com/saphelp_47x200/helpdata/EN/08/77ba810a1611d3a6b900104b55d538/frameset.htm]
    A production version determines the various production techniques that can be used to produce a material. It defines the following information:
    Alternative BOM for a BOM explosion
    Task list type, task list group, and group counter for assignment to task lists
    Lot-size restrictions and period of validity
    A material can have one or more production versions.
    It can be defined in the Material Master (txn MM02) in one of the following views:
    MRP 4
    Work Scheduling
    Costing 1
    The costing version is a different issue. It is a costing parameter and is used to save several cost estimates for the same material, with the same costing variant and the same costing date (e.g. in oder to cost the material several times with minor changes without creating new costing variants).
    BR,
    Antje

  • Product costing and cost center

    Hi,
    My client is a trading organisation. In order to do product costing, at which point in sourcing we need to enter the cost center.
    M.K

    Hi MK,
    In a trading organization, usually you do not need product costing as you are not manufacturing the product in-house.
    You can value your Inventory at MAP and when you do MIGO, the MAP will get adjusted itself with different p.O.rates that you purchase.
    And, even if you go for Product costing, you won't need Cost Center at any point of time for sourcing.
    Regards,
    Kavita

  • Deactivating production order changes after 1st operation is confirmed

    Hi,
    I want to deactivate production order changes after 1st operation is confirmed through CO11n.Ie. production order qty should not be allowed to change after 1st operation is confirmed.
    Expecting ur immense help on this.
    Regards,
    JS Karthi

    Dear ,
    PPCO0007
    EXIT_SAPLCOZV_001 Exit when saving production order
    Provide the restrictions in coding, so that when saving the order check for the order status PCNF or CNF and quantity change.
    Check thread
    first operation confimed - after system allowed changed order qty
    Regards,
    Ishwar

  • Price change after invoice receipt

    Hi All,
    I am pretty new to SD and was wondering how this scenario would best be handled.
    Customer has ordered and received. He receives invoice and realizes his price was incorrect (in this case, to high).  We decide to extend the concession to the customer and resubmit the invoice with the corrected price. What is the best way to handle that in SAP?
    Thanks in advance!

    Hi
    If the price is incorrect then you have to go for INVOICE CORRECTION REQUESTS doc type.
    Invoice correction requests doc type is  RK.
    this doc type is used to raise the credit memo if  the price is wrongly charged to the customer or if the quantity received by the customer is less when compared to the invoice quantity
    to nullify this we use invoice correction request to raise the credit  memo.
    Ex1 :  price wrongly charged
    billed quantity - 10
    actual price billed - 100
    new price -95
    so the price variation is Rs.5/- . so to nullify this we use doc type RK  where in we enter the new price and at the invoice we get the credit memo for the difference amount
    Ex2 :   Quantity wrongly billed
    acutal quantity billied in invoice - 10pcs
    customer received quantity - 8pcs
    so here also there is a variation of 2pcs for this 2 pcs we enter and we raise the credit memo.
    when you create a order with doc type RK with reference to invoice no .you get  2 item categories G2N & L2N. go to L2N line item and if it is price change  the pirce and if it is quantity change the quantity.and when you raise the invoice you get the credit memo for the difference price or qauntity.
    SAP has delivered RK doc type mainly with the intention to create these differences only , but there could be scenarios where you have to raise debit memos also .for  that you dont have doc type .so copy RK doc type to ZRK. and change in the copy controls also. and in the item category L2N . you have the sales doc type as K which is cerdit memo . now when you create a for debit memo. change it to L and put MRP type as D. even for standard also plz check while creating these settings in the item category L2N
    Regards
    Srinath
    Edited by: sri nath on Mar 21, 2008 5:25 AM

  • VFO3 display invoice is showing product cost - What is RISK and Benefit. How to stop.

    We’ve stumbled upon an existing Risk where users who have access to VF03 (Display Invoice) can see product cost by selecting Accounting Documents and PA documents (Value Field = Stock Value).
    The VPRS must remain as the copa stock value.  The issue is that sales and branch users can see the PA document. 
    What are the solution to hide that from sales and branch level or how to swithch on switch of user,
    PLEASE kindley provide path as well.

    Hi Kanapa,
    Should the users who have access to see the invoice also have access to view PA documents? If not, speak to your security person. They should be able to check the authorization objects for the transaction and restrict access to those individuals.
    Hope this helps.
    KF

  • Differential Invoice - Product costs are getting duplicated

    Hi,
    I set up differential invoice process for my client. Everything is perfect except an issue on PA document where product costs and other costs are getting duplicated (hence double cost). On differential invoice, in 'Diff. Condition' tab, these costs doesnot appear for difference condition types. Yet, they are again reflected in PA document when the Differential invoice is posted.
    Can you please share if anybody has some info how the issue can be handled.
    Points will be given for approriate suggestions and answers
    Regards,
    Praveen

    Hi Stefan,
    I think creating A/P invoice with posting date=03.01.2015 would be wrong.
    Instead you may create the same with posting date=07.01.2015 and document date=03.01.2015.
    Thank You,
    JO

Maybe you are looking for