Products and locations in DP

Hi,
I am just implementing DP and the Product and Location characteristics (9AMATNR and 9ALOCNO) are in the MPOS.
I created a cube (the cube has all the characteristics of the MPOS, Product Location and others) for the actualsales. When I want to create a combination I see the values of the characteristics except the values of the Product and Location characteristics. Do I have to bring these values through the Core Interface to APO, so that I can create the CVCs in DP?
Thanks in advance

Hi,
For creating a cube u need to have dimensions in sense characteristics in APO....The characteristics can be product type location type , time characteristics , uom etc.,,
The values of the characteristics are nothng but the master data of the APO that comes from ECC.So even when u create u r MPOS these values should be present in APO data mart.If u r using the same characteristics in infocube then u will not have to transfer again the data from ECC.If u want to see the CVC'S that u generated in apo u can look into T-Code :/sapapo/mc62.
If u want u r CVCs and keyfigures to be displayed in cube using T_Code : listcube.
Hope this answer will help u.
Thanks

Similar Messages

Product and Location link

Dear All,
In which Table or Tcode, can i see the link between a Product and Location?
Regards

Hi,
You can see the Product-Location master at /n/SAPAPO/MAT1.
The tables are
Product - /SAPAPO/MATKEY. You can get the Product ID from here.
Location - /SAPAPO/LOC. You can get the Location ID from here.
ProductLocation - /SAPAPO/MATLOC. You can get the Location IDs for Product IDs.
Regards,
Sandeep

Fetching Alert for Particular Product and Location

Hello,
This is on ABAP side..
I just wanted to know whether its possible to fetch alerts for Pariticular material and Location.
I checked the method Read_alerts in Class /sapapo/alert_manager, but its not working. Any suggestion on this are welcome.
Please do suggest..
Thanks in Advance,
Srini

Did you try using BAPIs BAPI_SYSTEM_ALERT_GETDETAILS ?

Function module to get PPM for given product and/or location

Hi,
I want to check whether any PPM is existing for given product, location.which function module i can use for the same.

There is a BAPI that might help - BAPI_PPMSRVAPS_GETLIST which has product and location selection criteria.
Regards
Laurence

Missing parts and production storage location

Can the production storage location in the material master for a component on a BOM be set to blank to pull in all inventory in the plant when calculating missing parts in a production order? I am finding that the blank production storage location is NOT pulling in all inventory in all storage locations; I honestly think that is how it should work but would like to see what others think or have run into. Thank you very much!

Hi Judith,
This can be done by system to carried out Avilability check plant level instead of storage location level. For that plz do the settings as suggested by our member.
Check the "No.Stor.Loc.Insp" in OPJJ for checking group and Checking rule combination and assign the same checking group to material at MRP view.
Donot Assign storage location for components in material Master and BOM item.
Please try anf comeback
regards
pradeep

Two financial statements at product wise and location wise below comp code

company code have number of products and they are being sold in various locations. here management wants to get financial statement both product wise and location wise below company code. the problem is that their is no field to post for BA, profit center and segment in MIGO posting and Billing document in standard SAP
please inform me is it possible to get financial statement both product wise and location wise below company code. if it is possible please provide answer.
Thanks & Regards
Arjun

Financial Statements can only be drawn at Company Code, Business Area, Profit Center, and Segment levels only.
If you want to have product wise, then the same must have mapped / designed against the one otherthan companyt code.

Follow-up question on BOM production and consumption of same item

Awhile back, I asked the question about whether it made sense to have a BOM structured to simultaneously produce and consume an item. BOM that needs to produce and consume same component
Thanks for the help and it does what I thought it should. We have a local difference of opinion on the consumption of primary components, though. To attempt to ensure that we account for the bleed-off of materials into a vacuum system, we set up a BOM like this
Material A    498.379
Material B    332.253
Material C     14.914
Material D     22.371
Material E     64.317
Material F    103.570
Material F     -35.804 (This is the quantity vacuumed away, treated as by-product.)
to cover a recipe card structured like this
Material A    481.150
Material B    320.775
Material C     14.400
Material D     21.600
Material E     62.100
Material F     100.00
The difference of opinion is whether to recognize the reclaimed material (Material F) at all on the BOM, with a minority saying that we will not consume (and therefore not order) enough of materials A through E. They say that "you have to put the same amount of good ingredients in as you produce because it's a closed loop system".
So the other approach would be a BOM like this
Material A    534.252
Material B    357.852
Material C     15.840
Material D     23.760
Material E     68.310
The material reclaimed (Material F) is sourced not only from this particular vacuum system, but from other vacuum systems outside the blending operation.
It seems to me that the first approach is correct, because we recognize consumption and production of the reclaimed item, and proportionately increase the component items to recognize that more are needed than will go out as good product. Even the reclaim becomes reclaim. The amounts vacuumed off seem to be consistent at 3.57%.
Which approach is correct?

Thank you for the reply. The reclaimed material can be as much as 11% of the total material made. Last year, over one million kilograms were worked back into the product as reclaim, and the metals are somewhat expensive (not like precious metals, but they are not trivial, either).
Accuracy versus precision is always something to consider, but I think it's important enough to follow, especially because it is sourced from several processes. The sourcing from the other sources means that the reclaimed material from those sources has already been reported as production of the primary product which consumes the virgin materials, so I think it should be re-introduced into the flow as a separate item (Material F)
The primary argument I want to settle is the business about how we won't order enough component materials if we use the BOM that shows simultaneous production and consumption. I think under the approach in which we ignore the reclaim, we will consume more components from the backflush location than we physically use and would then order too much material because of using a BOM that pulls only virgin materials.

Lack of Availability of Products and Services in C...

I've started this thread, to address the annoying problem of not having the same models and services avaialble in Canada as in other countires in the world but especially comparing to the U.S. I dont understand how the U.S., a country right next to us is getting almost all the new models of phones and we either get them a year later or not at all. We dont have any technical or customer support in Canada, apparently we have to call the closest one in the U.S. I know our population is smaller and whatnot, but its soo stupid and annoying not being able to purchase a phone, knowing it came from finland, and with warranty etc or if it breaks know where to go to talk to someone about it... It's not fair!! Loyal customers are frustrated and deserve more respect and services.

Hi,
For creating a cube u need to have dimensions in sense characteristics in APO....The characteristics can be product type location type , time characteristics , uom etc.,,
The values of the characteristics are nothng but the master data of the APO that comes from ECC.So even when u create u r MPOS these values should be present in APO data mart.If u r using the same characteristics in infocube then u will not have to transfer again the data from ECC.If u want to see the CVC'S that u generated in apo u can look into T-Code :/sapapo/mc62.
If u want u r CVCs and keyfigures to be displayed in cube using T_Code : listcube.
Hope this answer will help u.
Thanks

HP's Low Quality Product and Customer Service

On 1/23/15 I ordered a brand new Envy Phoenix 810 with modifications. First the website was broken and I ended up having to call to get the order placed. The computer arrived on 1/30/15 via FedEx, since paid for 2 day delivery.
The computer ran for 7 days and on 2/6/15 it froze in Win 8.1 and after reboot all I could get from it was a couple of clicks and fans spinning on high.
I called tech support, and the gentleman there very quick realized, as I had, this computer needed replacing. I made it clear I didn't want a 7 day old computer repaired, I wanted a NEW computer. He then sent me to some management group who told me, since their hardware managers don't work on weekends, the fastest way to get a new computer was for him to transfer me to the sales people. Back and forth with the sales people who told me I couldn't get a new computer until I sent the old one back. They sent me to customer support, who then put in an escalation to a manager, who wasn't working the weekend either, and who would call me back within 2 days.
A good 1.5 hours on the phone, and not once did I speak to someone whose first language was English.
I spent the weekend fuming to be honest, and now let's fast forward to Monday 2/9/15.
I waited for the call from the manager, and nothing. I finally gave up and placed another call to customer service. I was immediately told that I had to go through technical support first if my computer wasn't working, never mind that I am sure there was information on my account that told them I'd already been through all that.
So we start all over. Oddly, the computer, having sat disconnected from power all weekend, now behaved differently. It actually let me get into the bios, where we started it running on hard drive diagnostics, which eventually just froze, at which point we were back to no post and loud fans.
At this point the cycle started again, and I was sent to a manager who told me they can't send me a computer, I'd have to send the old one back. I explain again, I have no boxes to send the old one back until I get the new one etc..
At some point (this is about 2.5 hours into the calls for the day) I end up with sales again and behold there is an intelligent person who realizes I have a preferred account and they can just charge me for a new computer and credit me for the old when I call back, get an RMA and send it back.
Of course the new computer suddenly costs more, and in all this not once was I offered recompense for my "pain and suffering".
After everything, the promised call from a manager (remember Friday?) finally came on Tuesday afternoon. He had apparently never read the transcripts from Friday OR Monday, and wanted to start all over again. I told him a computer had already been ordered, being charged to my preferred account and I'd call for an RMA after it arrived and send the offending piece of dead electronics back then for a credit to my account.
He assured me that an even trade could be done and that he was transferring me to sales.. again. He either didn't understand what I was telling him or didn't want to listen. The lady in sales was as puzzled as I as to the reason the call had been routed to sales, and explained that due to a new system they had recently started using, it wasn't possible any longer to send a new computer out without charging for it and then getting the credit for the RMA.
I must say, first the shotty product and then this insulting experience with all of the HP support facets, located in "Timbuktu" (I honestly don't know where they are, but they are not in the USA) means this will be my last product from HP. And believe me when I say, between my daughters and myself we will be spreading the word far and wide about what HP is all about these days.
HP, you used to be a good company, worthy of my hard earned money, you are not now.

Hi @KerstinHuhn ,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publically post ( serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Regards,
George
I work for HP

Anyone else experience these boundaries to productivity and learning in iOS 8.1.1?

I have an iPad Air (wifi only) and iPhone 5s. I'm wondering if the following features exist in iOS 8.1.1 and maybe I've missed it?
#1- Raise to speak for Siri. I know there is "Hey Siri" but in order to use that it requires you to be a wall-hugger. Is that correct? I've read in a discussion board that you can hold down the home button to enable Siri, then bring it up to your ear. That seemed to work somewhat okay for me. I bought my first iPhone for the raise-to-speak feature...bought my 2nd iPhone for that reason. It's a necessary Accessibility feature for me.
#2- I know the Apple Wireless Keyboard always worked with my iPad Air and my iPhone 5s but wasn't always the same experience as when using a Mac. Meaning, the keyboard shortcuts that enabled me to be productive, weren't always enabled. For example, I can still use in Apple Mail, shift+command+D and that would send an e-mail I've drafted. I wish more of the same keyboard shortcuts I use on my MacBook Pro would be enabled with my iPad Air/iPhone 5s. But after updating, I noticed even more shortcuts were taken away. Things like fn+delete, command+delete or option+delete don't delete an entire word or sentence. I also can't use shortcuts anymore to highlight a sentence from my keyboard. Or at least, in Mail there seems to be some decent functionality. But in Safari when trying to send Apple feedback through these forms...no dice (on a consistent/reliable basis). Why not? Please bring that back. Being disabled is no fun. But these shortcuts helped me. Is it me, or have things gotten worse with this Apple accessory with iOS 8.1.1? Or, has anyone found a solution? Yes, I unpaired and re-paired the device. I also notice that while typing with the Apple Wireless Keyboard, it doesn't spell check as I type. That's no fun.
#3- Reliable searching in Spotlight. Keyword here is RELIABLE. I've seen a lot of folks on Twitter posting screenshots of searches in Spotlight in iOS 8.1.1 for even Apple apps (like Phone, Contacts, etc.) and nothing comes up for applications. I've had the same issue when it comes to searching for installed apps on my iOS devices. Why? I know the release notes for iOS 8.1.1 mentioned fixes for iPhone 4s and iPad AIr 2. But what about iPhone 5s and iPad Air? Where's the love? I've tried unchecking and rechecking the Spotlight options. That didn't help. Yes, reset all my settings. Didn't help. Right before iOS 8.1.1 was released, I had restored my devices.
#4- Reliable searching for event in the native Calendar app. Again, keyword here is RELIABLE. So a few times now, I have tried to search for (recent) or future events/appointments in the native Calendar app by tapping the search icon in the app. The result? Nothing was found when searching by that method. However, by going through the Calendar app (day-by-day) I was able to find the appointments/events I needed to. However, this experience was horrible and very tedious. And at first, I just heard about this issue from friends. And family members were asking me for help. Has anyone experienced this issue? Any workarounds?
#5- Battery drain issues since iOS 8.1.1 on both my iPad Air and iPhone 5s. For example, I was using Comcast/Xfinity's TV GO app to watch a movie I downloaded on my iPhone 5s. The device was in Airplane Mode and Location Services was off. The device ran very hot (even though it is quite cool in my apartment and outside, and it was not being plugged in). It went from a charge of 100% to the caution dialog box to recharge in just over 2 hours of viewing. Brightness setting was its lowest. Now, that experience is quite new to me. My battery was replaced by Apple about 4 months ago. I attempted to replicate the issue the following night with the same settings. It wasn't as bad but still a drain much faster than what I've seen before. Has anyone else experienced this type of drain? On my iPad Air, I've noticed a sharp decline in battery performance since updating to iOS 8.1.1 and I don't know why. And it's intermittent and frustrating. I use only Apple cords and adapters. I follow the instructions about Apple batteries and ways to optimize per the Apple website. Yet, I'm seeing a problem. Anyone else? Anyone have a fix?
#6- Is there any way to create location-based reminders on my iPad Air (wifi-only configuration)? I tried to make a location-based reminder and the native Reminders app wasn't having any of it. It would not allow me to do that. Why not? I tether my iPhone to my iPad.
#7 - Is there any way to use Apple Maps on my iPad Air (wifi-only configuration) when tethering my iPhone 5s? It doesn't do turn-by-turn navigation. Why not? Any workarouds?
#8- Sooo.....you know on our iPhones it gives us the cellular data breakout? Is there any way to get a breakout of how the iPad Air is using the Hotspot/cellular data? I ask because I know on Netflix website, there is an option to toggle playback settings. I switched it to "low" since I was going to be traveling. I noticed that when I tethered my iPhone to my MacBook Pro, the playback setting seemed to be at the low setting (based on cellular data usage from my iPhone). But when I tethered my iPhone 5s to my iPad Air, it ate up a whole lot of data. It's as if the Netflix app didn't adhere to change in setting. When I contacted Netflix, they said it was an issue with Apple. When I contacted Apple, they said it was an issue with Netflix. I was hoping to see some kind of cellular data usage report when we tether, so I can better help Apple or Netflix. Or...if you know of a way to get my Netflix to not eat up all my data, that would be great too.
I know this was a lot. But I appreciate any and all help. I'm interested in any other bugs you're seeing with the latest version of iOS 8.1.1. My apologies in advance if this has multiple spelling mistakes. Spellcheck and grammar check don't seem to want to work in this Safari session.

*Feedback*
"Use the form below to send us your comments. We read all feedback carefully, but please note that we cannot respond to the comments you submit."
http://www.apple.com/feedback/ipad.html
We can complain about Apple's business decisions, but these discussions are user to user talk about possible solutions.
Here are the places to report bugs:
Get an account at
http://developer.apple.com/ then submit a bug report to http://bugreporter.apple.com/
Once on the bugreporter page,
   -- click on New icon
   -- See if you need to attach a log file or log files, clicking on Show instructions for gathering logs. Scroll down to find the area or application that matches the problem.
   -- etc.

SAP Product and REACH Compliance 2.0 dese not add-on in SAP ECC 6.0 EHP5

hi experts,
I upgraded ECC 6.0 EHP5 and then try to add-on SAP Product and REACH Compliance 2.0 in SAP ECC 6.0 EHP5.
I aleady knew REACH 2.0 is available with ERP 6.0 EHP5 through Note 1389561 - SAP PRC 2.0: Installation and upgrade for ERP 6.0 and SAP Note 1456663 - SAINT: Enhancement Package 5 components on NW 7.02.
But unfortunately, When I try to install REACH 2.0 using SAINT, The error message was pop-up
========================================================================
OCS package SAPK-360COINTDAGBCA does not match the current software component vector
========================================================================
any idea pleas...
For reference
==========================
tp version : 720 patch 90
R3trans version : 720 patch 89
SPAM/SAINT : 7.02/43
SAP_BASIS : 702 sp 07
SAP/EA_APPL : 605 sp 04
Thanks and regards,
Jun

Hi Jun,
You could check the upgrade logs and traces at the location ../usr/sap/<sid>/upg/abap/logs.
Check for the latest last changed logs. Mos probably a prerequisite package for the REACH 2.0 installation is not included in the upgrade. The detailed logs should mention which prerequisite is missing.
Fore reference see thread: EHP4 upgrade error on SAPK-603DHINEAPS
Regards,
Srikishan

Service products and Warranties

Hi all,
Service products and warranties are created in CRM via transaction 'commpr01' .
I got to know that Service materials and warranties could also be created in R/3 system. If so which is the transaction to create service materials and warranties.
Also what is the advantage of creating "Service materials in R/3" over "Service products in CRM".
If we create "Service Products" in CRM and if we use the billling functionality of R/3 will the scenario work.. I mean do "Service Products" created in CRM are getting transfered to R/3. If it is transfered can I see the service Products in R/3 via 'MM03' transaction..
Any help is much appreciated.
thanks
Jothi

Good afternoon CeeDee,
Gas leaks can be quite dangerous and worrisome! I’m glad to hear that you were able to reach out to your gas company to get it shut off to your stove while you have your stove serviced under your Geek Squad Protection plan.
Presently, I was able to locate your Geek Squad Protection plan number using the information you registered with the forum. It is regrettable to hear it may be taking a few weeks to get the part necessary to repair your stove. As you state the part was estimated to arrive tomorrow on October 17th, I would like to look into this further to ensure we can get you back up and cooking safely in a reasonable amount of time!
If you should have any questions while I am researching this issue further, please let me know.
Regards,
Tasha|Social Media Specialist | Best Buy® Corporate
Private Message

How to assign products in locations in mass?

Hello
I want to know (standard way) if I can to assign products in locations in mass,
because this products don't have MRP views in these locations in R3.
These locations only are created in APO.
thanks for your answer.
Kind Regards.

Do you mean create products in locations? Not assign?
You will need to create these products for each location. It is fast and easy to do manually, or you can use the APOLOADER to do this.
Otherwise, you will have to write a simple ABAP program.
What is purpose of having these locations in APO but not R/3?
Ken

Co products and by products

Hi,
I have a scenario where in during a production of main Finished Material, two co products will come out. These products undergo further processing and they can be sold and also these two co products are used to produce one more material (by product) which is sold as well used in the production of main Finished material.
processing of co products and production of by product take place separately in other production machines/units.
can someone please suggest how i can map this scenario? and in this situation how the BOM is created??
Regards,
Pavan

Hi Prasobh,
Material "A" is the main finished material which uses production unit "01" to produce.
During production of "A", materials "B" and "C" will come out as a co products.
Material "B" is further processed in production unit "02" and material "C" is further processed in production unit "03" to make them as sell able and usable materials.
Again material "B" and "C" are used to produce material "D" which uses production unit "04". Material "D" is also sold and
This material "D" in small quantities used in the production of main material "A".
I can get production requirement for material "A" only.
All production units are located in the same premise.
The scenario is bit complex, above explanation may give some clear picture to you.
Pavan

Nothing Appears Under My Products and Services

I purchased Premiere Elements through Adobe online and downloaded it. I don't know if I ever registered it or what that even does. Now that I have my new computer I tried to download it again, but fould out that I deleted the email with my serial number. So I looked under My Products and Services but it says that I have none. Is there any way that I can get another email sent to me with my serial number?

KJFist the next step then is as follows:
If you have already checked Adobe.com for your serial number, and haven't received an email from Adobe, Chat with Adobe.
For the best assistance, I recommend our chat support at http://adobe.ly/yxj0t6. Our chat representatives can provide a personalized experience to resolve the issue you have described. Also if you can locate your purchase it would be beneficial in case they are not able to locate your account under a different e-mail address or phone number.

Products and locations in DP

Similar Messages

Maybe you are looking for