Profit Center Document not getting generated when direct FI doc is posted

Dear Experts,
Profit Center Document not getting generated when direct FI doc is posted. However CO Document is generated for Line Item 1 mentioned below.
Accounting Entry
Line 1 -Debit Expense ( Cost Center) 1000
Line 2 - Credit Bank 1000
Advance Thanks
Sanjai

Hi,
Pls check profit center configuration.... Some config might have missed.....
Use the t.code 1KE1 For analysing the profit center configuration.
Regards,
RAM
Edited by: Ram000 on Oct 7, 2011 10:45 AM

Similar Messages

Profit Center is not getting captured in Vendor line item from MIRO.

Dear Friends,
Profit Center is not getting captured in Vendor Line Items from MIRO Transaction for some New Business Users, where as for Old Users profit center is getting generated at Vendor Line Item.
We have provided the same authorization of old Users to new business users. (i.e. New user is a copy of old user)
Please help us how we can the get Profit Center in all transactions will be processed by New Business users.
I think we need to maintain user based authorization to get the Profit center in vendor Line items processed from T.Code:MIRO in SAP.
Looking forward for your kind cooperation in this matter
Thanks & Regards,
Naveen Kumar.

Hello Naveen,
I am not very sure about your query, as you might be knowing that the Profit Center is only updated in New GL tables (FAGLFLEXA, FAGLFLEXT) and hence the Vendor relavant tables would not.
The profit center information in the split lines or the line of the 'General Ledger View' are only displayed within transaction FAGLL03 which read the 'new' table for the NewG/L.
About profit center wise reporting, when New GL is active Please review attached consulting SAP note:
- 826357 Profit Center Accounting and new general ledger in
I hope this helps. If not, please provide an example of your requirement.
Thanks and regards,
Suresh Jayanthi.

Profit center document not generated after creating the billing document

Hi,
I have few billing document for which the accounting document is created, but no profit center document got generated. What could be the reason? The profit center is captured at the account assignment tab of sales order as well as at the item level of Invoice and in accouting document too. The only problem is it has not generated the "Profit center document". Pl help. Thanks in advance.

Hi
When you save the billing document then the accounting document and Controlling document gets generated.
A profit center gets captured and it can be used when we check the accounting document. But make sure that for the G/L accounts profit center is assigned and in your controlling area details also profit center is checked.While configuring controlling then the profit center should also be assigned . to the G/L accounts .So kindly check with the help of your FICO consultant wheather proper assignment has been done or not
Regards
Srinath

Accounting documents not getting generated for mvt. type 221 Q

Hi friends,
When goods are issued for consumption for project accounting documents are not getting generated.
I have tried with mvt. type 412 Q, 211 Q,
by mvt type 412 Q, the stock is transfered to project stock, it shows the stock of material in project stock, by movement type 211 Q the project stock gets consumed. So at the time of consumption of consumption account should hit and relevent accounting document should get generated. this is not happenning.
When i check material document and check for accounting document, message flashses that movement is not rrelevent for accounting.
Can any one throw more light on this?
Thanks and regards
SAP MM

Hi,
Please check in PO item details Delivery tab. In that GR Non-valuated checkbox might be checked.Generally for account assignment category asset it is ticked.
If you tick GR non-valuated check box then at the time of GR accounting document will not be created.Accounting document will be created only at the time of IR.
or
Have you mantained Chart of accounts.
have you mantained Valuation area settings
Transaction event key
Valuation class settings.
Check your material master data in accounting view have mantained Valuation class.
Check your back ground settings OMWN.

Profit center document not created for initial stock upload

Hi Gurus
We have created initial stock upload for one of the inventory items through movement type 561.Though the profit center was populated in the line items the profit center document has not been created and when we go and run balance sheet profit center wise there are no results for display? Any suggestions ?

Hello,
Check your 3KEH Settings
Check your OKB9 account determination
Make sure you have profit center number ranges in GB02
Regards,
Ravi

CO-PA document not getting generated

Hi,
while sales billing CO-PA profitability document is not getting generated. I have checked the configuration. In
KE4I the condition type (with account key ERL) has assigned to the value field ERLOS.In PA transfer structure
we have maintained the assignments - source and value fields, here included the sales revenue GL which has the
cost element category 11.
In the sales order we have account assignment with real WBS object. Is this hinders the profitability document
getting generated?
while VF01 system is not generating the profitability document but accounting and controlling document
is getting generated.
Is it mandatory to mention the Business area in KEDR derivation?
Requesting a early feedback.

Hi Mel,
Since WBS is assigned to the order item, both revenue and cost will be collected in WBS if the WBS is marked as 'billing element'. Check the WBS master to confirm this.
The COPA document will be generated when the WBS is settled after RA run.
Otherwise, check in KE4W, if COPA value flow has been reset for your billing type.
BR
Abhinav

Display name not getting generated When creating user thorugh GTC

We are using GTC flat file as a trusted source. We see that display name not getting generated. And same thing happening when creating a new GTC mapping.
previously when we ran with few test user got created with display name through GTC flat file , Suddenly we see this issue display name not getting generated through flat file recon.
Manually user creation has no issues.
Please let me know if you have any idea about this issue.

Don't use GTC... GTC is inflexible and buggy technology... Nothing guaranteed... Rather create your own custom trusted recon code...
For more details
26 Known Issues of Generic Technology Connectors
http://docs.oracle.com/cd/E10391_01/doc.910/e10360/issues.htm

Accounting document not getting generated

Hi
While doing invoice , G/L account is getting determined but accounting document is not getting generated. In the header data its giving a error " Error in accounting interface". What could be the possible reason ?

Hi,
Kindly check in VOFA, for the billing document, have you maintained any value for Document Type.
This is nothing but your accounting document type, where accounting entries are generated. Also, check number range is maintained or not for the given accounting document type in OBA7. Number range is created in FBN1
One more thing, remove check box of Posting Block in VOFA
Hope this will work out
Regards,
Sagar

Profit center text not getting displayed in report

Hi all
Iam using 0profit_ctr in my query.But in report the text associated with it is not getting displayed.When i see the masterdata the text is displayed properly.
Please let me know how to rectify this.
Thanks
Bhanu

Right click on the master object, and click "Activate Master Data"
Hope this will resolve the issue.
Ishdeep.

Profit Center Substitution Not getting reflected in FI document duirng MIGO

Hello friends,
I have implemented a substition exit for profit center replacement. The rule has been created with this exit. But when I do a MIGO, i see the FI documents getting created with original profit center, not with the profit center that we have manipulated in the substitution. Even though i see in the debugging mode that the profit center is being replaced within the code, when the accounting document is generated, I see the old profit center only in FB03. There is no other substitution exit that is overwriting the profit center. What else could impact this / any inputs would be of great help.
Thanks,
Mayank

Are you using Accounting document substitution (Tcode OBBH)? Try using Controlling substitution (Tcode OKC9), this will substitute the coding block (COBL) of accounting doc where profit center (COBL-PRCTR) is found.

Profit centre document not getting posted in ledger 8A

Hi All,
We are posting a a document through FB01. We have given a profit centre & also derived a profitablity segment. After the FI document is posted, when we go to environment>Document environment>Accounting document we are double clicking on profit centre document. It is leading us to a screen which shows that the ledger is L0 but we want 8A to appear. What are we missing?
Thanks,
Lakshmi

Please check the ledger to application/sub application assignment in table T881.
You should normally 8A ledger - Summary table GLPCT - Application EC - Sub application PCA.
Regards,
Ganesh

Accounting document not getting generated while doing the GR

Hi,
We have created the stock transfer for PO with 2 plants in same company code. Then created the delivery & then done the goods issue in VL02n. Then we have done the GR in MIGO.
But we are note getting accounting documents aganist GR; where as we are getting accounting documents against goods issue document.
Why this is happening ??? How can I get accounting documents in GR???
Thanks & regards,
Pradip

Hi,
Please see the following details from SAP Help regarding GR for a Plant to Plant STO with shipping :
Goods receipt in the receiving plant
Once the materials arrive in the receiving plant, the plant posts a goods receipt for the delivery. The stock in transit is therefore reduced and the unrestricted-use stock is increased.
At goods receipt posting, a purchase order history record is created automatically.
Since the material has already been assigned to the receiving plant for accounting purposes, on goods issue, only a material document is created on goods receipt, no FI document. The stock situation in the supplying plant is not affected by the goods receipt.

PO not getting generated when currency as MXN - Mexican Peso

Hi,
We are in SRM7.0 ECS, ECC 6.0
When we try to create a SC with currency MXN - Mexican Pesos and vendor currency as MYR - Malaysian Ringgit, then after all the approvals SC is going to I-1111 Item in transfer Process and PO is not being generated.
Upon my further analysis i noticed that the conversion factor for currency MXN-MYR is not maintained in TCURF table. We have maintained it now but still the same problem is occuring and SC is going to I-1111 Item in transfer Process
When i tried to repush the SC with FM: BBP_PD_SC_TRANSFER got the message as
Buffer table not upto date
Could any one help on this problem
Thanks & Regards,
Venkat

Hi Yann
Thanks for your reply. I am using 4.5b. I am able to create a service PO manually in R/3 with reference to the service PR created by EBP. Also, I think this issue is very close to SAP Note 509059 but it is for EBP Release 3 & 3.5 & I am unable to find the simillar note for EBP2. Please let me know how to proceed further...
Thanks & Regards
Raghu

Billing document not getting generated.

Hi,
I have created a project with 1 WBS element and a milestone assigned to it. This milestone is checked or billing document. I have created a sales order with one item and assigned a WBS of a project as a account assigment category to this sales item.
Then in sales order i have maintened a billing plan with billing plan type as milestone billing. This is copying the billing details from the milestone to the billing plan of Sales order. The billing tpe is F2 and date category is 01.
If i confirm the WBS by putting the actual dates the billing block is getting removed but i am unable to see any billing document in it.
Is system creates billing document once the block is removed or what is the procedure?
Can anybody guide me on this?
Thanks

hi,
The procedure for billing through sales order is as follows:
Check first billing block is removed from the billing plan item (by entering actual dates in milestone). Then use transaction VF01. Enter the relevant billing type - then depending upon the stratergy whether billing against project delivery or sales order enter the document no.(delivery doc/sales order no.) then click create and then save.
Regards,
sudhir

Profit center document is not created for invoice cancellation document.

Hi all,
when i create the invoice, Profit center document is getting created,
where when we try to create a cancellation document for the same invoice, Profit center document is not getting created,
can anybody let me know where can i check this problem??
and can u let me know Profit center document creation is dependent on BILLING DOCUMENT TYPE?
Thanks in advance,
Krishna Dussa

Hi Krishna
First of all Check wheather Profit center is there or not in the Material master record when you are cancelling the billing document..If it is there then with the help of your ABAP team ,ask them to debug by putting once you run VF11
Regards
Srinath

Profit Center Document not getting generated when direct FI doc is posted

Similar Messages

Maybe you are looking for