Profit center filed in Fund Center Master data in Budget Control system(BCS

Hi to all,
This is client requirement that Profit Center need to be put in Fund Center master Data, I have checked standard SAP field status for Fund center master data but Profit center option is not available there.
Could some one advise me how to add profit center into Fund Center or is there is Badi or customer enhancements available in SAP.
Thanks & Regards,
YK.

Hi,
I dont know the reason why the customer wants this but in case the Profit Center of the funds center must be the same as the one available in Cost Center master data they can create a derivation rule in FMDERIVE for this.
The same in case Profit Center comes from the WBS Element, in order to read the WBS element master data, you will have to
create a new derivation step calling function module FMDT_READ_MD_WBS_ELEMENT.
In case Profit Center should come from another place, let me know.
Just to inform the exit names, in FMMD0009 Customer-Specific Screen Fields for Funds Centers, you have the following exits:
EXIT_SAPLFMF2_001
EXIT_SAPLFMF2_002
I hope this helps.
Best Regards,
Vanessa Barth.

Similar Messages

Funds Management with Budget Control System (BCS) submodule

hi sap gurus
can any one give me the details for the
Funds Management with Budget Control System (BCS) submodule
if any material pls send to my mail id : [email protected]
its very urgent pls
thank you

Hi,
Try executing FMAVCREINIT report and check if the problem persists.
Regards,
Eli

Use of Budget controll system in funds management module

Dear all,
Presenly we are using Former budgeting.Now we want to go for Budget controll system (BCS).Now our doubt is whether we have to convert the former budgeting to BCS.Or we have to go for fresh implementation of BCS. For your information we have not migrated to ECC6.0. Only technical upgradation of ECC6.0 is completed.Kindly advice.
Regd.
Shivaji

Hi, depends on your business requirements.
Do you want to use Addresses(means not 1 to 1), AVC, Revenues Increasing the Budget, Cover Eligibility, Consistency Check etc.
If former budget satisfied your bus. requirements , and you just need e.g. new account assignment(eg funded program), then may be there is no need for new implementation, just some correction

Profit center field in production order master data in KKF3

Hi GUrus,
is there any way of mass updating the profit center field in production order master data in KKF3 transaction. PLease help
Anusha

HI charlie,
When i try to change the profit center, the system gave this message. We already have a profit center for a production order and we need to change the profit center, That is when we are getting the errror message.
You have changed the profit center from AR00620800 to AR00620301. This is only allowed when the corresponding configuration was made in Customizing. Then this message is only a warning, which you can ignore. PLease help
Thanks
Anusha

Bdget Transfer from One Fund Center to another Fund Center

Dear Frieds,
I can able transfer the negative budget from One Fund Center to another Fund Center which is wrong and want to control the same.
I can use the SAP Note:983853 but still finding the same error.
can any one please help me to restrict the negative transfer of One Fund Center to another Fund Center.
Thanks and regards,
Mahendra Dev.

Dear Eli,
Thanks for your reply.
I will explain what config I did in my system.
Step 1. DEFINE KEY FIGURE - ZZCURRENT_BUDGET followings are the properties
Plus/minus sign     version     category     value type     activity     budget type     WF status     fiscal year
+                            0      9F         B1     ENTR          *          P           -1
Step 2. DEFINE CHECK LIBRARIES FOR BUDGET ADDRESS - Create a new consistency check copying 0000002
i. PREREQUISITE u2013 Leave Blank u2013 not able to understand what validation need to put.
ii. CHECK             - Left Operand- Key figure - CURRENT_BDGT_BT
                               Scaling factor u2013 100.00
                               Operatoru2013 Greater than or equal to
                               Right Operand u2013 Key figure - ZZCURRENT_BUDGET
iii.MESSAGE       - Message Class u2013 FMCC
                             Message Type u2013 E
                             Message Number-001
Step 3. ASSIGN BUDGET ADDRESS CHECK LIBRARIES - Created Library can assign here.
Kindly let me know were I did the mistake in my config.
Thanks MD.

How to load master data from 2 source system without using 0logsys as compo

Hi Gurus,
I am working on a project which has 2 source systems.
Now I have to load master data from 2 source systems without making 0LOGSYS as compunding attribute. Because all the objects which i want to use compunding attribute are reference objects for lot of other info objects. So, i dont want to change the business content objects structure.
So, please help me out providing logic.
thanks in advance
Peter.

Hi Peter,
Can you brief me how did you resolved your issue?
Regards
Utpal

Master data synchronization between SAP systems

Dear all,
I have 2 SAP systems and I'm required to synchronize some kinds of HR master data between these 2 systems, how can i achieve that without any ABAP developments?
Does anyone give me any suggestions or others?
Best regards,
Bean

Hi Bean,
You can achieve this using IDoc and PI using following scenario.
1) Populate IDoc in 1st SAP system and pass it to the second system as direct IDoc to IDoc transfer.
Ex: Basic Idoc Type: HRMD_A07
2) If direct communication between two XI system is not allowed then you can use PI as middle ware to transfer data.
But for IDoc you need to create partner profile and ports etc.
Hi,
Thanks so much for your kind help.
How to make the transferring automatically whenever the specified kind of master data is changed.
Best regards,
Bean

Customer master data updation from one system to another system

HI Experts,
I have an issue with customer master data updation from one system to another system. And here only one field is not updating properly from one system to another system. and we found this is through idoc , but we don't find field in any segment.
and the field is called ADDR1_DATA-HOME_CITY.
and this will displayed as different city in address column.
but as per the notes given in help , it is by program , form through only passing. but not able to trace and as per my analysis ADRC table , ADRNR had this field HOME CITY.
And this is for some customers updating wrong one from one system to another system , and for some customers field itself not updating in address column.
please can you suggest any one. here are screenshot for your reference.

that is not enough, it was enough in times before 40b release, but this was in the last century
Please read OSS note 384462 - Master data and addresses
it explains what you have to do for ALE

Master data upload into SAP system

Hello,
I want to know if there is any standard method to upload material master, customer master, vendor master and finance master data into SAP system.
I am not referring to LSMW's, BDC's and using BAPI's. I am aware of standard programs like RMDATIND for material master upload, RFBIDE00 for customer master upload and RFBIKR00 for vendor master upload. But these are using direct input method and SAP recommends this only for testing purpose. I am not sure if this could be really used in actual live scenarios.
From some other posts in the forum, I came to know about some transactions like BDLR, SXDB and BMVO. Can some one tell me how to use these T.Codes?
If some one has any detailed documentation on these T.codes or in general standard master data upload techniques please send it to [email protected]
Thanks in advance,
CMV

Hi,
Define the following attributes, using the F4 input help and F1 field help:
Report
Name of a registered program for this program type
Variant
You can only specify a variant with programs that are started directly.
With direct input, data from the data transfer file undergoes the same checks as with the online transaction and is then transferred directly into the SAP System. The database is updated directly with the transferred data.
For the documentation of other transactions please refer the correponding program documentation..which is more helpful,
Reward points if helpful,
Regards,
jinesh

Master Data Extraction from source system

Hi BW Gurus,
I need to extract the "Purchase Document Type" and "Purchase Document Status" master data from R3.
Can anybody shed some light how can i find out which table in R3 host this data.
Thank you in advance and i promise to assign point for your answers
Thank you

Hi,
I feel the base table for Purchasing Document Type is T161.
For Status of purchasing document there is no base table .the avilable value are comming from Available Domain values.
With rgds,
Anil Kumar Sharma .P

Master Data issue from external system to BW

Hi,
BW Version: BI 7.0
Source System : Oracle D/B
The Data will be processed by some external application and the processes Data will be stored in tables in Oracle D/B.I am extracting Data from Oracle Tables to BW.
The issue i had is in the external application for example if we created a new Location ID,The new location ID won't be avaliable in Oracle untill i use it (assing it to any employee)
Once i assign it to employee then the Location ID and Description will be avaliable transaction tables.
Then in this cas how can i load master data to location ID in BW.
or
Thanks

Hi,
Simply create a Location ID InfoObject that will work as Master Data. Then create a datasource for the extraction of the Location ID Master Data (at least for the attributes, and probably for the texts as well).
You can then schedule an update of this data everynight via process chains.
All this will update the desired information independently from the transaction data.
Hope it helps,

BCS - master data change in productive system?

Hi group,
We are about to go live with our BCS system, but of course someone got the great idea of changing the company code currency for one of the "non-SAP" companies in the group since the sytem was set up.
When I enter the consolidatin workbench in our production system, everything is considered customizing, so no changes are allowed - even to master data. I''ve searched the "Object changeability" settings of the BW system but couldn't find any settings regarding BCS. I also checked settings in se06 and found a namespace "/FINB/" which I suspect has something to do with BCS (currently set to "Not modifiable")?
What are the correct system settings for the BCS system to function correctly, and what is the normal procedure for maintaining master data in SEM-BCS? - by transport requests or by changing directly in the productive system?
Best regards
Thomas
P.S.: Are there any usefull resources for BCS on the Internet? The help in the system is very limited and I can't find anything on the SAP marketplace.
Message was edited by:
Thomas Ringe Pontoppidan

Hi Dan,
Example: you have a single selection containing a set (not range) of separate values. Then you decided to change the set (adding one more value, for example). Are you saying that this single selection change in DEV will be reflected automatically in PROD?
From my experience I know that while using single selections, the system replaces it by the set/range/node. And when a single selection was changed, nothing yet happened with elimination settings using SS. You have to go into each part of the settings in the method and refresh the SS. You'll see that only after that the set of values was changed. It's obvious for me that if I don't do this refreshing in DEV and then import the request into PROD, I'll have the old, not modified, version of my settings.

Delta loading master data errors in source system Message RSM340 quality

Hi,
I'm trying to load with delta master data for standard data sources.
In dev, everything seems fine.
I' ve transported the same elements to QA. I've done init, it is ok. I do delta, I get red status: Errors in source system, message no. RSM340. I've tried to put my delta on green, I've remade my init, I've reloading with delta, and I get the same problem.
I have this problem for all master data loading.
Should I install some infoobject from Bi Content?
Thanks a lot !

Hi,
Check following threads
[3003 + R3299 + RSM340] error messages loading an ODS
Extraction failed with error Message no. RSM340
BW Data Loading - Delta Processes
Thanks and regards
Kiran

To Load Master Data From Two Source System

Hi All,
I have a small question :
- Can we load master data from two different source system say from flat file and R3 or any two different or similar source system?
If answer is "Yes", then how?? If possible step by step.
Appreciate your valuable points.
Thanks,
Niraj Sharma

Hi,
Still i have problem.R3 Transformation and DTP is getting activated but when i am executing DTP for flat file,
I am getting below ERROR.
Object DTP DTP_d55.......could not found in version A.
I have checked the Master data locally for source sys in compounding Tab of the key field.
Please help..
Thanks,
Niraj

Master Data from two source systems

Hi Gurus,
I need to load master data from two different source systems. What is the best way I could do that ?
I know one approach is add system id 0logsys as prefix in compound tab and load it. But problem is master data table will have two different records and in the report it will display 2 records, can not summarized it in the report. But I need one record in the report. What is the best approach ?
Thanks
Liza

Hi,
Create two DataSources. one for each of the source system.
Create two separate flows to the master from these two DataSources.
Hope this helps!

Profit center filed in Fund Center Master data in Budget Control system(BCS

Similar Messages

Maybe you are looking for