Profit Center is not taken from Material Master

Dear all,
When we post material-related items from SD or MM with link to material/plant (as additional account assginment) then Profit Center is taken from Material Master. But when I manually (FB01 or even FBR2) post similar item with link to material/plant (as additional account assginment) then Profit Center is not taken from Material Master.
Why this happen? How to fix it? We need to derive Profit Centers from Material Master for items that have links to material and posted via FI.

>
Jigar Thakkar wrote:
> Hi,
>
> It will also take effect in FI, as we have defined the same. Status will be 3 (Other transactions + cross-company (orders + billing doc.) for Subsitution in T code 0KEL
>
> Regards,
> Jigar
Just checked this. It's not worked. This subst. not even called (I've checked w/ active Trace).
So, the question is still open. How to derive PCtr from material in manual FI (FB01, FBR2) transactions.

Similar Messages

Detemine Profit center in PO automatically from Material Master

Dear All,
I would like to determine the cost center in SAP PO automatically from Material Master, Since we are putting the Profit center in Marterial master in Genernal Plant /Data 2 View.
And this Profit center is linked with the cost center with 1:1 relation.
So Please advice on this .
Sukhvinder

Hi
there is no stander way to achieve this you may get by some enhancement
Yes,If you have profit center in material master then you will get your profit center display at time of MIGO, not in PO
and If you have account assignment categories in PO then you can get profit center display in PO on account assignment tab
for that you have to change setting in OME9 for your account assignment and for display profit center field in setting
Regards
Kailas ugale

VK11 Material Description Does Not Came from Material Master

Hi Gurus,
Good day. Please kindly help advice where does the material description in VK11 came from as it displays a different description not equal to material master.
Thank you in advance.
Regards,
Rellie

Dear Rellie,
It should show the same as mentioned in MM01. Plz check again d MM03 as description for a matieral wil always b picked from Mat. Master only across SAP.
If still ny specific issue then share otherwise plz close d thread.
regards

Wrong Tax Classification Taken from Material Master

Hi Experts,
I have a problem with Tax classification when determining the tax % at sales order entry. Below is the scenario:
1) There are two taxes applicable: Output Tax (15%) and Excise Duty (1%)
2) Customer 01 is liable for both Output Tax and Excise Duty
3) Material A is liable for Output Tax, but not liable for Excise Duty. In material master, the tax classification is maintained as "0" for Output Tax (the first line) and "1" for Excise Duty (the 2nd line)
4) Material B is the opposite, i.e. liable for Output Tax but not liable for Excise Duty. In material master, the tax classification is maintained as "1" for Output Tax (the first line) and "0" for Excise Duty (the 2nd line)
5) The tax codes are defined (with tax % maintained) in FTXP
6) Pricing condition records are also maintained.
Now the issue is during order creation with Customer 01 and material A, both Output Tax and Excise Duty are getting calculated as Zero. Where as in case of material B, both taxes are getting calculated with value (15% and 1% respectively).
It seems that the system is getting the tax classification from the first tax (output tax) in material master and apply it to the other tax (excise duty). Therefore the Excise Duty gets the wrong value if the tax classification is different from that of the Output Tax.
Have anyone come across this issue before? Your help is much appreciated.
Thanks.

HI ,
thanks for your reply. In the meantime I figured out the issue myself. It was due to the access sequence that only checks tax classification 1 instead of 2 , 3 etc.
Thanks for your reply.
Dominique

Profit center is not picking from sales order to the billing document

Hi
I am creating billing document but it is not picking profit centre from the sales order.
Could you please help me in this.
thanks in advamce.

Hi,
Ensure that the profit center is assigned to your Sales order.
Also maintain the following settings in copy control.
Goto the T.Code "VTFA".
Select your valid combination.Details.
Double click on "Item".Select your Item category.
Details.
Maintain "Copy requirements" as "002".
Data VBRK/VBRP as "002".
Regards,
Krishna.

Maintain Profit Center as mandotary field in Material Master

Dear Experts,
We would like to make Profit Center under Sales: General/Plant view as mandotary field during Material Master creation. Kindly assist me the path that where we can maintain this. Thank you.
rgds,
nantha

Hi,
Go to OMS9, Under Field Selection (Field Selection Group 1) screen tab, double click the material type for which you want Profit center as mandatory field.
Scroll down to Selection Group "48", Select the radio button "Required Entry".
Go to MM01, check under Sales: General/Plant, you will be able to see Profit Center as Mandatory field.
Hope this will help you out.
Regards,
Vijay

Document is not capured from material master to PO

Hi Gurus
I created a material in the material master. In the additional data, i have attached the PDF drawing of the material and i have save it.
Say Material Shaft was created.
Then i created Purchase order for the material Shaft. In PO i am not able to get the PDF which i stored in material master.I need to send the drawing along with the PO.
What i have to do ?
- Pithan
Edited by: Pithan Pithan on Feb 5, 2009 5:02 PM

hi Pramod
Thank you for your reply
For material X , i have created a Document in CV01N and released it. in the object link - material master, i have attached the X material.
when i am creating a PO (ME21N), i gave a material 'X'. selecting the PO item and clicking documents icon below that, i didn't find any document, but when i manually enter the document, it is attached..
I need to know, the document is attached to the material master, when creating the PO, it has to pick the document...
I am asking why its not picking it... ?
- Pithan

Flag Unlimited Overdelivery not purpose from material master for po with as

Dear.
I have a material with flag unlimited overdelivery filled in the material master purchasing view.
When I convert a pr to a u201Cnormalu201D purchase order (without account assignment) the system rightly purposed this flag.
When I convert a purchase requisition with project account assignment category (category Q) in the po the system donu2019t set this flag.
Do you know the reason of this behavior ?
Thanks in advance.

Do you reference a contract in case of the project purchases?
then check the contract if different tolerances are setup there.
maybe it is caused by a program bug that is fixed with OSS Note 1644491 - unlimited overdelivery flag is cleared with price change

Shelf life from material master not flowing into purchase order

Hai friend
I have set a shelf life value in material master ( both minimum & Total shelf life).
But while creating purchase order, values are not flowing from material master to purchase order.
The field is empty.
How to configure, please help.
Regards
Rammohan

1.activate batch management
2.to calculate SLED production date/date of goods receipt is mandatory during GRN
3.Maintain characteristic for production date MCH1 - LFWRT
4.assign this to class
5.Maintain this class to material
6.Now do GR ,it will prompt for production date .based on this ,sytem will calciulate SLED
hope it helps

PO Profit Center is not coming in Goods Receipt

Hi Gurus,
1. We are creating a PO with Account Assignment WBS and in line item we are able to see the Profit Center and this purchase order Account Assignment Category - Q (Proj. make-to-order).
2. In material master we dont have any Profit Center
3. In WBS we have Profit Center
4. When we do the GR - Profit center is not coming.
Material Account Dr   xxxxx (profit center is updating)
    To GR/IR Account                 xxxxx (There is no profit center)
And when we do the Invoice Receipt
GR/IR Debit xxxxx (profit center is updating)
Vendor Credit    xxxxxx
At the same time when we create the PO with Account Assignment Category -P (Project) we are getting the Profit Center in both line items
Material Account Dr   xxxxx (profit center is updating)
    To GR/IR Account                 xxxxx (profit center is updating).
How Purchase Order Proft Center is determining into Goods Receipt.
Is there any different Rule for Account Assignment Category -P (Project) & Q (Proj. make-to-order)
Thanks
HS

Hi Alex,
Thanks for your reply.
My question is for Account Assignment Category P (Project) Profit Center is updating. But AAC: Q (Project make order) is not updating the Profit center in Goods Receipt.
Account Assignment Category -Q
Material Account Debit (Profit center updating)
GR/IR Account Credit (Profit center not updating)
For Account Assignment Category - P (Projects) for both line items Profit center updating,
Material Account Debit (Profit center updating)
GR/IR Account Credit (Profit centerupdating)
Thanks
HS

Header data not coming from vendor master when creating SA using BAPI

Hello,
I am creating SA using BAPI_SA_CREATE. I am passing the vendor code and other header related data in the header table of the BAPI.
SA is created successfully with all the data that is passed to the BAPI. Now if the payment term and inco terms data is passed initial to BAPI then this data is not taken from vendor master. This data appears blank in SA.
Shouldn't this data be picked up from vendor master as they are maintained properly in vendor master?
I just need confirmation whether BAPI picks or not from vendor master if the data (payment term and inco terms) passed is initial.
Thanks and Regards,
Saba

Hi,
Are u passing X to corresponding fields of HEADER structure what ever you have populated in HEADER structure .

Profit Center is not getting captured in Vendor line item from MIRO.

Dear Friends,
Profit Center is not getting captured in Vendor Line Items from MIRO Transaction for some New Business Users, where as for Old Users profit center is getting generated at Vendor Line Item.
We have provided the same authorization of old Users to new business users. (i.e. New user is a copy of old user)
Please help us how we can the get Profit Center in all transactions will be processed by New Business users.
I think we need to maintain user based authorization to get the Profit center in vendor Line items processed from T.Code:MIRO in SAP.
Looking forward for your kind cooperation in this matter
Thanks & Regards,
Naveen Kumar.

Hello Naveen,
I am not very sure about your query, as you might be knowing that the Profit Center is only updated in New GL tables (FAGLFLEXA, FAGLFLEXT) and hence the Vendor relavant tables would not.
The profit center information in the split lines or the line of the 'General Ledger View' are only displayed within transaction FAGLL03 which read the 'new' table for the NewG/L.
About profit center wise reporting, when New GL is active Please review attached consulting SAP note:
- 826357 Profit Center Accounting and new general ledger in
I hope this helps. If not, please provide an example of your requirement.
Thanks and regards,
Suresh Jayanthi.

Inter company PO is not pulling the valuation price from Material Master

Hi Experts,
We have a scenario, Inter-company PO with pricing procedure which pulls Material Price from Material Master (Std Price), similar to intra company PO
Even after maintaining the std price in the supplying plant , system is not pulling the Valuation price from Material master only for a particular Material
I checked the Plant level attributes ( for ex: Plant Mat status, client level status and everything looks fine )
Could you guys please mention what would be the issue ?
Thanks in advance
Illayaraja

Hi,
Is there a routine which pulls the value? then you need debug with ABAP help for that routine where its failing to pull
Thanks
Diwakar

Purchase group in Purchase order from creator not from Material Master

Hi All,
Can you please help me with the next one?
Points rewarded.
In the materialmaster is purchase group 44B entered but
The default purchase group of the buyer is 55C. Is it possible
that the value 55C is automaticaly placed in the PO when
the buyer creates the Purchase order?
At this moment always the default value from Material
master is proposed.
Thank you in advance,
Eric.

Hi,
You have to look at the overall process.
The idea of the Purchasing Group is to indicate which buyer manages that material in that plant.
SO when the system (or a user) generates a requisition for that item at that plant, the system then knows who should convert it etc.
So my question to you would be, "why have you got a default P group in the material master record that is NOT the buyer who manages that item at that plant?"
If several buyers share a list of materials then just use one P group for the "group" of buyers, instead of separate P groups for each buyer.
The system doesn't have the option to automatically overwrite the P group on the requisition because this may be someone just "helping out" the buyer who is busy and so it does not mean that the requisition should be changed to be linked to this other P group.
You already have the field "created by" on the PO and so if you need to report on who created what, then simply use this field instead of P group.
But the P group on the material master (and therefore the requisition) shoudl ALWAYS be the P group that will convert reqs for this item plant combination.
Steve B

Profit Center Field Not deriving during Asset Postings

We are using document splitting functionality with profit center mandatory for any kind of posting.
Scenario-Asset purchase through PO:
1.Purchase Order -created
2.At goods receipt error is coming balancing filed is not filled (bcoz asset is not a material), for materials we are giving profit center. in the asset master i assigned cost center, still profit center is not deriving.
Scenario-Asset Purchase from vendor
purchasing asset directly from vendor through F-90, against asset line item we have to assign profit center. Cost center & profit center is coming in display mode. in the asset master i already maintained cost center, still profit is not deriving.
I already done config for field status asset account number (G067) andPosting Keys (70,75). I also checked note no.684659.
how profit center will be derived for any kind of asset postings.
Thanks
Sai

I think you might be using the account assignment category 'A' in the Purchase order for asset purchase. Please check the IMG for account assignment category thru transaction 'OME9'. For the relevant account assignment category you are using in the PO, tick the checkbox against 'Derive acct.assgt.'
That should solve your problem.
Regards,

Profit Center is not taken from Material Master

Similar Messages

Maybe you are looking for