When bsik table profit center will be populated?

can any one tell me when bsik table profit center will get populated?.
we r doing fb60, miro?.
so we want to see the profit center value in bsik table.
Thanks in advance

Hi Suresh,
The actual table updated will be BSEG only but you will find the same document # in BSIK table if it is a open vendor items else if it is closed (i.e. payment for the invoice has been done to vendor), you will find it in BSAK table.
Basically, BSIK(Open items) and BSAK(Closed items) are a secondary index tables for BSEG table. Whenever you update the profit center(PRCTR) in an accounting doc, you will find it in BSEG table. But its index will also be in BSIK table if it is still an open item.
Cheers,
Vikram
Pls reward for helpful replies!!

Similar Messages

  • Profit Center is not populating in SPL document

    Hi
    Would be highly obliged if some one can suggest on the following issue,
    _Information related to issue:_
    1) SPL Activated
    2) Document split activated in SPL
    3) SAP ECC 6 (No New GL and splitting activated)
    _Issue_
    Profit Center is not populating against Recon account line item in the SPL document, generated from Vendor Invoice posting (FB60) in FI, in fact the document splitting is activated for this very reason in SPL, but still the derivation is not happening for recon account line item.
    Can some one suggest how the profit center can be derived against  recon account line item in SPL document.
    Regards
    Ashwin

    Hi Ashwin,
    Whenever you post the issue to the SDN please give the scenario as well  means which is the spl document  you are posting
    With regards,
    Venkatakrishna

  • Profit center to be populated in Production order without material.

    Hi,
         I am creating Process order without material for my requirement and the settlement receiver of these order will be a cost center. Now my requirement is the Profit center assigned to the cost center is to be populated in the Profit center field (CAUFVD-PRCTR) in Assignment tab of the Process order when saving the order. Kindly tell me how to achieve the same.
    Thanks & Regards,
    Ravi Kumar C.

    Dear R.Brahmankar,
       The exit referred in the note will trigger while opening CORO itself. But my requirement is to trigger after entering the cost center in the settlement rule (Settlement receiver is manually entered before saving the order). After entering the cost center in the settlement rule system should populate the profit center. Is there anyway to achive the requirement.
    Regards,
    Ravi Kumar C.

  • Profit Center to be populated in documents already posted

    Hi,
    I work for a retail client. There is a store that went live about a week back. There is a validation applied, which updates a profit center to the tender GL accounts (differnet kinds of revenue - like cash/credit card/debit card/sodexho etc) .
    As the validation was missed to be transported - profit center is not to be found in tender documents. Is there a way out that I get the profit center updated to the tender documents that have been posted until now. In other words update of profit center in the documents already posted.
    Regards,
    Soujanya.

    hai
    Profit center never gets updated in Table BSIK and BSAK ...You will never get it in FBL1N..Please use KE5Z or S_ALR_87013346 or S_ACO_52000888 Payables - Profit center as an alternate ..
    As you must be aware that profit Center information is never entered in Vendor in line item. It is only entered in the expense/income line items...You will always find this field blank in BSIK ...BSIK and BSAK segmentation table is BSEG , PRCTR is there hence it can be set in O7R3 as a special field to be displayed in ledger but it will not show values. I hope it clears you.
    Thanks and regards

  • Field Profit Center is not populated while posting through T-Code F-02

    Dear Sir / Madam,
    While posting through T-code F-02 the field Profit center is in hidden mode
    as a result I am getting the given below error.
    "GLT2201 - Balancing field profit center in line item 001 not filled"
    Please guide me as to how do I change Field status varient so that the field Profit center gets activated in optional mode in F-02.
    I tried searching the same but could not find the solution.
    Regards
    Chirag Shah

    Dear expert
    Check following steps...
    1. Use transaction ACSET and enter cost center as your account assignment for type 01 APC posting..
    2. Make sure Cost Center exists in the Asset Master..
    3. Make sure profit center is entered into Cost Center master.
    4.Check the steps where you assign the GL accounts to the splitting rules.
    suggest you to go through the below mentioned links
    Balancing Field "Profit Center" in line item 001 not filled
    Balancing field "profit center" in line item 001 not filled
    GLT2201 - Balancing field profit center in line item 001 not filled
    Balancing field "Profit Center" in line item 001 not filled
    F-51: Balancing field "Profit Center" in line item 001 not filled
    Balancinf field profit center in line item 001 not filled
    Regards,
    Ajeesh.s

  • Trial Balance table Profit Center/Cost Center

    Hi SAP Experts,
    I want to download SAP trial balance as per profit centre,cost centre, I know there are lot of standard report but I am looking for tables where I can download these values?
    Thanks,
    Suyog

    Hello Suyog ,
    Long before I had worked on such a report.
    Please try with any of the tables between FAGLFLEXA or FAGLFLEXT  ( If I have recalled correctly  )
    FAGLFLEXT is for TOTALS so I think it will be appropriate.
    Please check.

  • Profit center error on VF44(rev reog) & MIGO

    HI All, I am facing a problem in profit center posting, when billing a contract (VF01, VF44) and MIGO
    Contract Scenario,
    I am Creating   Contract  In CRM    and replicating it as a contract  in ECC to performe Billing(VF01) and Revenue recog(Vf44) the contract created is replicating  to ECC  with  Internal order as a  real   account assignment  object on the contract , when we are billing / revenue recog  the dummy profit center  is getting  populated inthe accounting entries  , the senario is explained  as below
    I have replicated contract with 4 line items, with different profit centers (Say P1, P2, P3, P4 and assigned to same real  internal order(IO1),as i am using single object controlling  and controlling senario at the transaction level)  to all the line items ,when ever  the line item is Billed(Vf01) or the Revenue recognized  on the Contract(Vf44) the Accounting Entries are getting  populated with  Dummy profit center as the AUFNR u2013 prctr is u201CDummyu201D
    I there a way we change the profit center on the accounting document on billing and revenue recognition
    Goods receipt:
    I am Creating   Contract  In CRM    and line item  in the contract which is backlined  with the princial will generate a  PR in ECC with Account assignment cat "F"  When ever a  Po with u201CFu201D account assignment   is created  and GR is done on the Same , Dummy  profit center is  getting  populated  in the Accounting  entries
    I there a way we change the profit center on the accounting documents (derive the profit center from the Cost center _ prctr rather than the AUFNRu2013 PRCTR) and even though the Internal order is assigned to  the line item
    We are not using the Document Splitting Functionality, I am aware that when ever there is real cost object assignment, profit center will be populated from the cost object only
    I require your help very badly , Please guide me .
    Thanks

    Hi Rajesh,
    Do you know how you solved it and can you please share it. I am also looking for a similar solution.
    Thanks
    Prasad

  • Profit center posting Error!

    HI All, I am facing a problem in profit center posting, when billing a contract (VF01, VF44) and MIGO
    Contract Scenario,
    I have contract with 4 line items, with different profit centers (Say P1, P2, P3, P4 and assigned to same real  internal order(IO1)  to all the line items ,when ever  the line item is Billed(Vf01) or the Revenue recognized  on the Contract(Vf44) the Accounting Entries are getting  populated with  Dummy profit center as the AUFNR u2013 prctr is u201CDummyu201D
    I there a way we change the profit center on the accounting document( Populate  from the VBAP u2013 Prctr  rather than AUFNR u2013prctr) and even though the Internal order is assigned to the line item
    Goods receipt:
    When ever a  Po with u201CFu201D account assignment   is created  and GR is done on the Same , Dummy  profit center is  getting  populated  in the Accounting  entries
    I there a way we change the profit center on the accounting documents (derive the profit center from the Cost center _ prctr rather than the AUFNRu2013 PRCTR) and even though the Internal order is assigned to  the line item
    We are not using the Document Splitting Functionality, I am aware that when ever there is real cost object assignment, profit center will be populated from the cost object only
    I require your help very badly , Please guide me .
    Thanks

    thanks for support

  • Crm- Contracts problem  with profit center!

    HI All, I am facing a problem in profit center posting, when billing a contract (VF01, VF44) and MIGO
    Contract Scenario,
    I am Creating   Contract  In CRM    and replicating it as a contract  in ECC to performe Billing(VF01) and Revenue recog(Vf44) the contract created is replicating  to ECC  with  Internal order as a  real   account assignment  object on the contract , when we are billing / revenue recog  the dummy profit center  is getting  populated inthe accounting entries  , the senario is explained  as below
    I have replicated contract with 4 line items, with different profit centers (Say P1, P2, P3, P4 and assigned to same real  internal order(IO1),as i am using single object controlling  and controlling senario at the transaction level)  to all the line items ,when ever  the line item is Billed(Vf01) or the Revenue recognized  on the Contract(Vf44) the Accounting Entries are getting  populated with  Dummy profit center as the AUFNR u2013 prctr is u201CDummyu201D
    I there a way we change the profit center on the accounting document on billing and revenue recognition
    Goods receipt:
    I am Creating   Contract  In CRM    and line item  in the contract which is backlined  with the princial will generate a  PR in ECC with Account assignment cat "F"  When ever a  Po with u201CFu201D account assignment   is created  and GR is done on the Same , Dummy  profit center is  getting  populated  in the Accounting  entries
    I there a way we change the profit center on the accounting documents (derive the profit center from the Cost center _ prctr rather than the AUFNRu2013 PRCTR) and even though the Internal order is assigned to  the line item
    We are not using the Document Splitting Functionality, I am aware that when ever there is real cost object assignment, profit center will be populated from the cost object only
    I require your help very badly , Please guide me .
    Thanks

    Hi,
    Did you try using substitution rules for CRm processes ?

  • Profit center determination in R/3 when releasing line item in CRM

    Dear All,
    In CRM under Service Contract,whenever a line item is getting released,automatically debit memo request is created in R/3.However,the profit center is not populating in the line item.Even the profit center field in r/3 is in non-editable mode.
    We have maintained the profit center substitution rule in R/3 based on sales org using 0KEM T.code and assigned the same to CO Area.
    Kindly suggest me in this juncture.

    Hello,
    I assume you had setup "Single Object Controling" for your scenario and the profit center are in connection with the internal order which is created in case of "Single Object Controling"
    See :Single-Object Controlling - Generic Functions in Service - SAP Library
    You can set up the profit centre substitution in the ECC transaction SCRM
    under the path Customer relationship management -> General settings ->
    Settings for Profit Center Accounting, you can define substitution
    rules for the profit center. Documentation is also provided.
    Furthermore for determination of the relevant profit center, you can also use BAdI CRM_UPLOAD_CO (method CHARACTERISTICS_SERVICE_FILL) to assign the proper profit center to the internal order. See the documentation for these BADI in the documentation for these BADI (Tx. SE18).
    I hope these information will help you.
    Best Regards
    Gerhard

  • Profit center substitution with internal order when generating GL doc from

    Profit center substitution with internal order when generating GL doc from MM
    Dear expert,
    Please advise how to substitute successfully the profit center by which user-exit via FI substitution function.
    Substitutions have been set for profit centers in FI via t-code OBBH, but  the profit center will always be determined from the internal order when posting from MM subcon goods receipt
    Thanks
    James
    Edited by: Yun-Chung Yung on Jun 3, 2010 10:46 PM

    Hi,
    SAP give note 539421 - Dummy profit center with cost center
    account assignment. Looks applicable for your case.
    Solution:
    With the attached modification, you can restore the function from Release
    3.1: The directly assigned profit center remains and is not overwritten
    with the dummy profit center of the cost center.
    The problem is not caused by a program error in this case. The profit
    center is always derived from the existing CO account assignment even if
    this is the dummy profit center (see also Note 62417).
    This note applicable from release 40 until 605
    I hope this can help you. FYI, in my case, i do not create dummy profit centre, then profit centre working as sap priority.
    Regards,
    Dewi

  • FBCJ Profit Center Field mapping with customized z-table

    Hi Techies,
    Requirement is that: in FBCJ t-code, the field profit Center will be connected with customized z-table, and while user will input except values of customized table, system will generate error message.

    Hi Krishna,
    This check can be achieved by creating validation using T.Code GGB0. How this can be done can be got from the following links.
    Validations - ERP Financials - SCN Wiki
    Regards,
    Abijith

  • Profit Center not populated in Asset Transactions

    Hi
    We are trying to post asset transactions. We are on ECC 6.0 with New GL and document splitting on profit Center. while posting the periodic depreciation, system is not allowing posting of the document, saying that profit center is not populating in the line item. Pls suggest.
    Regards
    Rupal

    Hi
    You need to check the following:
    1. The cost center settings in T Code ACSET
    2. The splitting characteristics in the menu path:
    IMG>Financial Accounting (New)>General Ledger Accounting(New)>Business Transactions>Document Splitting>Extended Document Splitting
    3. If cost center is a required field in your asset master and if you have assigned a cost center in the asset master
    4. If a profit center has been assigned in the cost center master assigned in your asset master.
    Thanks & Regards
    Sanil K Bhandari

  • Report Profit center when active document splitting

    hi all!
    i have a problem, please help me!
    i actived document splitting.
    after that i enter an entry:
    debit an customer     500
    credit revenue         240 (profit center 1)
    credit revenue        260 (profit center 2)
    after that, use TCode fb03 to display this documnent (general ledger view). i see
    debit receivable account 240 (profit center 1)
    debit receivable account 260 (profit center 2)
    credit revenue         240 (profit center 1)
    credit revenue        260 (profit center 2)
    and, when i see Profit center report (for Profit center 1), i dont see any receivable account.
    so, can you help me how to display this receivable amount in profit center report
    thank in advance.

    Hi,
    using New GL and activating "old" PCA is possible,  just do the settings in T-Code 1KEF.
    But as PCA is an integrated functionality of NewGL why do you want to post this documents again to "old" special ledger?
    Guess its more senseful to update your reporting based on the NewGL data source...
    Best regards, Christian

  • F110 - Automatic Payment Program (APP) - Profit Center wise

    Has anyone worked on plant wise/profit center wise payments before? We have done necessary enhancement to populate profit center in vendor line item at the time of posting invoice. We are doing profit center wise proposal run in F110 by using additional selection criteria in F110.
    However, the problem arises when different profit centers want to make payment to same vendor. In such cases when one profit center has created the proposal for the vendor, F110 locks the vendor for any other payment proposal by making an entry in REGUS table. Hence, when the other profit center creates proposal in F110, the vendor is shown as locked. The lock is released only after the payment run.
    All the profit center will run proposal at the same time and after that payment run will be carried out by central treasury. Hence, I cannot schdule the payment run of different profit center at different time.
    Is there any work around? Is it possible that same vendor can be contained in different proposals of different profit centers?
    We were thinking of doing an enhancement to delete the entries from REGUS table after proposal run. Would it be right way?

    It is standard behaviour in F110 for locking vendor.
    Try luck to use same paying company code for all your profit center company codes.  Keep update

Maybe you are looking for

  • Question for the experts on Video problem

    We are away on holidays but didn't want to miss this opportunity to ask for help from the experts. I'm not sure if I have a problem with my motherboard or video card or both. I posted the problem previously but here it is again. I have an HPE-250f HP

  • OS X 10.8.1 won't recognize iPhone 4 or iPad as devices

    My iMac is 5 days old.  I received the 10.8.1 update.  iTunes sees my iPhone and iPad,but Finder will not.  I've tried connecting a few times, re-starting, etc. I am using an Apple power cord plugged directly into the USB port.  Oddly, finder does se

  • Using -client or -server by default

    I'm using JDK1.3.1. I would like to know 1) will the hotspot turn on automatically when using "java" with any option 2) if yes, it is using -client or -server? Thanks. Frank

  • Problem with sound buttons on keyboard since upgrading

    Since my upgrade to Mavericks the sound buttons on my keyboard F10,11,12  no longer work. When I press the buttons to either increase or decrease sound, the page I am on disappears from the screen and the mute button diminishes the page but there is

  • My icloud storage is full but i can't see where all the data is.

    I am using an iPhone 4S.  My iCloud (free) storage of 5GB is approaching full usage.  When I try to free up some space, the documents and data only amount to less than 20MB.  I can't see where the rest of the 4.88MB is used and is totally invisible t