Program has encountered a problem while rendering and shuts down

I was rendering a video, and about 23% of the way through the program encountered this program. I restarted and tried it again. It now happens in the 7th clip out of the 80 clips on the timeline or about 7% of the way. I've deleted the scratch disk files with no luck.
Does anyone know what would cause this problem?

Which Satellite L675? There is a label on the bottom.
Probably easiest to restore from the hidden partition. See the section Recovering to out-of-box state (recommended recovery method), which begins on p. 62 of the User's Manual.
   Satellite L670 Series User’s Guide
Yes, I've read here that it can take a long time to restore the factory image.
-Jerry

Similar Messages

  • When iPod connected message: "program has encountered a problem"

    Problem connecting 4gb Ipod Nano to Itunes.
    1. Without connecting the Ipod, I can double click on the iTunes icon and the program runs as usual.
    2. However when I connect the iPod via the provided usb connector several strange things occur
    a. As soon as the iTunes program appears on the screen, I am simultaneously connected to my Microsoft Outlook email screen which appears on top of the iTunes screen. Shortly thereafter the screen showing the iPod information then appears, immediately or even simultaneously with the window that says the program has encountered a problem and it must close.
    b. This recurs each time I repeat the sequence.
    c. Oddly enough so long as I do not click on the end program button, the iTunes program synchs perfectly with the iPod that it is connected to.
    Question: why, when the iPod is connected does Microsoft Outlook automatically show on my screen when iTunes comes up? Why does the “encountered problem” screen come up?

    Hey lenharris,
    Have you tried starting Firefox in Safe Mode? Hold down ''shift'' while Firefox is starting up. If the crash doesn't happen in Safe Mode, you should read [[Troubleshooting extensions and themes]].
    There is also a lot of useful stuff in the [[Firefox crashes]] Knowledge Base article. If you've recently upgraded, you might want to check out [https://support.mozilla.com/en-US/kb/latest-firefox-issues#w_firefox-crashes-when-i-start-it this article] as well.
    Hopefully this helps!

  • "Microsoft Office has encountered a problem with licensing and will need to close. If this problem persists, uninstall and reinstall your product."

    Hi Guys!I am not it pro. but i need your HELP.Pls my microsoft Word and Excel starter were working fine, but after playing with my laptop, downloading , removing smth , i cannot open them proper anymore, cos this message comes up:
    “Microsoft Office has encountered a problem with licensing and will need to close. If this problem persists, uninstall and reinstall your product.”What can i do to make it work fine back? plssss need Help! thank u i n advance!!!!!!

    I faced similar challenge. Re-installation did not solve the problem due to unsuccessful un-installation of ‘Microsoft Click to run 2010’. The following steps worked for me. Please use your discretion to try and see if it works for you too..
    1 Uninstall Microsoft office Starter 2010. If
    ‘MS click to run 2010’ doesn't get uninstalled use  Microsoft fix it tool meant for installing and uninstalling programmes, to uninstall the same.       
    2 Download ‘Microsoft Office Starter 2010’ from internet.      
    3 Before launching, right click the executable file and click the 'properties'. Go to
    ‘compatability’ tab and choose appropriate 'compatibility mode' as per your OS. Tick the check box to use admin privilege under
    privilege level section.
    4 Launch the executable to install Microsoft Office Starter 2010 afresh. It should go through four steps during installation now. Complete the steps and enjoy. Thanks !

  • When I launch Premier Pro is says this program has encounter a problem and will now close. ??

    PP will not open. It want to close as soon as I launch it??? I have updated it to the last version.

    Hi Danny3380,
    Thanks for choosing adobe forums,
    please provide following information :
    What is the OS and version ?
    What is the Graphics Card installed on the system ?
    How much Ram do you have ?
    Do you use any external Hard Drive ?
    Are you using security software e.g. Norton, etc
    and
    if windows, Please check if you have windows defender turned on ?
    Regards,
    Sandeep

  • Satellite X200-219 overheats while gaming and shuts down

    Ok I originally lived in the UK, where I bought a Toshiba X200-219.
    Since then I moved to the States, and have the laptop plugged into a surge protected extension cord, attached to plug converter.
    Once the warranty expired on the laptop, I upgraded to 4GB of RAM, and switched out both hard disks to Seagate 320GB 7200rpm drives.
    Now ever since I moved to the States, the laptop has been overheating, more and more frequently even *before* I upgraded the components; this has usually been happening whilst gaming. I have been regularly blowing out any dust that might have settled inside the vents with compressed air
    But this time it's different. I was playing Red Alert 3, and it did it 3 times. When the laptop over heats, I have to remove the power cord and then reinsert it before switching it on. Except the final time I tried that, the laptop didn't start. There are absolutely no signs of life from the thing, even after cooling down for the past 2 hours. There aren't even any lights acknowledging that the power cord is plugged in. Oh and I've replaced the fuse so it can't be that (the battery is in the back in this instance)
    In the UK the laptop ran at a normal temperature. Over here it was running hot to touch, and the fan was screaming but it was manageable.
    It ran even hotter on the odd game I was playing but not whilst en/decoding movies.
    Please don't let this become one of *those* threads where everything fizzles out and I don't get an answer. Any ideas please?
    Happy holidays folks
    Aseel

    Hi
    Overheating is a serious issue because a high temperature can damage the internal parts.
    The internal temperature increases to a higher level because all devices like CPU and GPU are running with high performance while gaming.
    In such case the cooling module fans should rotate faster to ensure that the warm air would be blow away
    In many cases the cooling modules cannot work properly because the dust and debris clog up the cooling grilles or there is not enough thermal grease between the cooling module and CPU or GPU.
    Furthermore its not recommended using NON-Toshiba graphic drivers because such non Toshiba graphic drivers are not designed for the notebook usage and can lead to such overheating issues.
    You should also ensure that there is enough free space around the notebook. This is important for properly fresh air circulation.
    But of course an faulty cooling module could be also responsible for such overheating issues and in such case ONLY the ASP would be able to help you.
    Greets

  • Im having a problem with my ps elements 8,download manager active x has encountered a problem

    im having a problem with my ps elements 8,download manager active x has encountered a problem
    adobe reader and acro manager has encountered a problem and needs to closed
    -+++reg.exe has encounter a problem
    -invidia graphics driver has stopped working properly.

    Check out this link if any of the information in there can help you move forward:
    http://kb2.adobe.com/cps/400/kb400530.html
    Regards,
    Ankush

  • Z30 freezing and shutting down

    I am on my 2 nd z30 in 2 weeks and they have both had a problem with freezing and shutting down, sometimes in mid use and sometimes on its own, can anyone?

    Hello soggy001
    Welcome to http://supportforums.blackberry.com
    Make restarted the z30?
    If your problem evidences the persistence
    Apply a hard reset keep the power button for 30 seconds.
    Regards.
    I recommend you make a reload of the BlackBerry OS Link
    Connect your z30 and run BBLink
    Then go to preference and press the reload option software
    Let the process do all your work, and then you start setting your BB
    And load your backup.
    And let us know if your problem evidences the persistence.
    You must have the latest version of the BlackBerry Link installed.
    Regards.
    VIA | gutijose14
    http://supportforums.blackberry.com/t5/BlackBerry-Z10/My-BB-Z10-is-not-recieving-txt-msgs/m-p/266997...
    Please thank those who help you by clicking the button.
    If your issue has been solved, please resolve it by marking "Accept as Solution"

  • Reboot and shut down scripts failed on open dialogue window

    I have a headless server.
    It is scheduled to shut down at 01.00 AM via the control panel.
    I have a script (tested it works) to shut down the server should the control panel fail.
    tell application "System Events"
    shut down
    end tell
    Should this fail for some reason there is a second script that tell the computer to reboot shortly before the control panel schedule should start the server.
    tell application "System Events"
    restart
    end tell
    Yesterday it failed to execute either script. ITunes had been running and checked for updates and found one. It was installed and this resulted in the dialogue box appearing that wants you to promise not to steal the code etc. No person there to click OK so it hung and cancelled all processes.
    So this stopped the shut down as well as the reboot.
    The reason I have this script is as to make sure the computer has no hanging programmes or windows and shuts down and fires up on the desired time.
    Anybody knows how to make it force to quit the programme?
    Or better would be (and my preference too) to have it check if such windows are open and OK them before shutting down.
    I know this is only a one in thousand occurrence, but it would be nice to have it not happen again, this time I was there to fix it.
    Thanks.

    'b4' - ?
    Your problem is not with the provided instructions; but, the version of 'Script Editor', SE, you use.
    I use SE, v. 2.0 (43) from a 'Panther' (MacOS X 10.3.x) installation. This application version works on PPC Macs running 'Panther' and 'Tiger' (MacOS X 10.4.x), and Intel Macs running 'Tiger' and (dog crap) 'Leopard' (MacOS X 10.5.x). At least here.
    The features and (intuitive) ease of use of SE v. 2.0 are superior to its equivalents of 'Tiger' and (dog crap) 'Leopard'. Besides allowing one to view the 'Description' textarea field of a 'Run Only' script, SE v. 2.0 allows one to select all of the 'Suites' titles in the left side list, click on the right side panel, and then search for any character, word, or string - such as 'a', 'is', 'the', 'reference', 'in MHz' - anything. Try such a search with SE v. 2.1 and v. 2.2.
    Try this example:
    Select SEs' 'Window, Library' menu item. A window titled 'Standard Additions.asdictionary' will appear.
    From the 'Library' windows' list, double click on 'StandardAdditions'.
    SE v. 2.0 only - Select all of the suites of the left side panel, then click once on the right side panel.
    In the search field (SE v 2.1 and v. 2.2) or search window (SE v. 2.0) enter 'in MHz', and press the <return> key. Did SE v. 2.1 or 2.2 find it? SE v. 2.0 goes right to it; even highlighting the search string result.
    As an exercise - waste your time looking for 'in MHz' in SE v. 2.1 and / or v. 2.2.
    Hint 01: Search for 'system'. Now you have a one (1) in four (4) chance of locating the user desired string (of 'in MHz') by viewing the text of each listed result.
    Hint 02: Try searching by 'Description' - click on the search 'magnifying glass' and a popup button of choices appears - click on the 'Description' menu item. Still, unlike with SE v. 2.0, SE v. 2.1 or v. 2.2 does not actually highlight the located character, word, or string.
    Ok, you finally located the line of 'in MHz'; but now - you want to see all of the commands of the related 'Suite' - how do you do it? In SE v. 2.0 you may have to scroll up a little; but, in SE v. 2.1 and v. 2.2 ...

  • My iPhone 4 was run over at work worked fine  for 5 days then got really hot and shut down. I can not get it to power back up. I have photos that were not backed up is there anyway that I can retrieve my photos from the phone?

    MY iPhone 4 was run over at work by a forklift the screen was badly cracked but other than that worked fine for 6 days. Then it got really hot while charging and shut down and will not  power back up. I have photos on this phone that we're not backed up to I cloud is there any way to retrieve my photos from this phone?

    No. You probably should have backed it up while it was working during those 6 days...

  • A rectangle box with four options, Restart,Sleep,Cancel and Shut Down appears some times when I boot up, how can I stop this from happening?

    A rectangle box come up sometimes when I boot up my computer, it says, Are you sure you want to shut down your computer now? and has four boxes Restart, Sleep,Cancel and Shut Down. How can I get rid of this annoying occurance?

    That box is normally invoked with Control-Eject.

  • Just purchased and installed photoshop and everytime i try to open it it says "windows has encountered a problem and must close the program" anyone else have this problem?

    I have just purchased the photography package on my windows 8 computer and everytime I open photoshop an error message pops up saying that windows has encountered a problem and needs to close the program. I am really frustrated that this is happening after I purchased this plan and would like to be able to use the product I have purchased

    +1 to Chris' assessment.
    Keep in mind that it's your responsibility to provide a problem-free working environment on your computer for Photoshop, and system software (such as display drivers) can have problems.
    Look in your Windows Event Logs (specifically, your Application Log) for the info requested above on the specific crashes.
    -Noel

  • Crw32.exe has encountered a problem and needs to close while running report

    Ever since I installed HEAT 9, Crystal Reports 11 crashes periodically.  I get the message "crw32.exe has encountered a problem and needs to close."  This message usually appears after I run a report, enter my DB credentials, and enter parameters. 
    I also have Report Viewer installed as a part of another application called Wasp.  I can open reports using the report viewer but when I close them the entire Wasp program crashes every time.
    Both of these problems only happen with HEAT 9 installed.  I do not have this problem with HEAT 8.4 installed.

    I suggest you contact the makers of HEAT and ask them if they support your configuration. It may be they do not support multiple versions of CR installed. It may also be caused by the order you have installed the various programs. Try using the repair feature for each program in various orders to see if that resolves the problem.
    Thank you
    Don

  • "itunes has encountered a problem and needs to close" - while importing

    While importing a CD i get an error message halfway through and the burning stops. The windows message is: "itunes has encountered a problem and needs to close".
    I have tried to repair:
    1. remove Quicktime and repair itunes.
    2. updated windows, itunes, quicktime, updater.
    3. updated my dvd/cd driver.
    4. deleted all forms of itunes and quicktime and reinstalled.
    5. deselcted "use error correction" under preferences, advanced, importing.
    It is not the burner as Windows Media imports the cd just fine.
    Please help. It drives me crazy. ty.

    hi Jonathan!
    This is only a temp solution...
    there are a couple of ways of making this change semi-permanent (if the fix works for you). you would need to download and install a utility that starts up itunes with a single processor affinity set.
    Otto discusses two in this thread (Runfirst, in the first post in the thread, and imagecfg in one of the last posts in the thread):
    http://discussions.apple.com/message.jspa?messageID=826742&ft=y&amp;#826742
    (although Otto is talking about a podcast crash in that thread, the same underlying cause of that crash also causes the importing crash.)
    love, b

  • "(program).exe has encountered a problem and needs to close. We are sorry for the inconvenience."

    Hi, I was using Tweetdeck for the past few months without any problems. Recently, the application still works fine.. it opens as normal, all posts I am following appear etc., but when I try to send a tweet the application closes and I get the error
    "tweetdeck.exe has encountered a problem and needs to close. We are sorry for the inconvenience."
    I uninstalled tweetdeck and reinstalled it many times. Sometimes it would work for twenty minutes, other times not at all. I got fed up trying, so uninstalled it and downloaded Seesmic. This new application opened perfectly, all users I am following and their tweets updated perfectly, until again I went to post a tweet and it closes and I get the error
    "seesmic desktop.exe has encountered a problem and needs to close. We are sorry for the inconvenience."
    As these are the only two applications I have used that give me this error, and are also the only two applications I have used that are related to Adobe AIR, I can only assume the problem is connected somehow?
    I was wondering if any of you might have any suggestions on how I could fix this? I am not the most tech saavy guy, so any help would be greatly appreciated as I am starting to lose patience with it!
    Thanks in advance.

    You might try uninstalling the AIR runtime and re-installing it. You might also try contacting the developers of these applications to find out whether the problem is related to issues they already know about.

  • QuickTime Player has encountered a problem and needs to close. [error]

    *Error message:*
    QuickTime Player has encountered a problem and needs to close. We are sorry for the inconvenience.
    *Error signature:*
    EventType : BEX P1 : QuickTimePlayer.exe P2 : 7.60.92.0
    P3 : 496279cc P4 : QuickTimePlayer.exe P5 : 7.60.92.0 P6 : 496279cc
    P7 : 0000130d P8 : c0000409 P9 : 00000000
    *Error report content:*
    C:\DOCUME~1\MyUserID\LOCALS~1\Temp\WER1cc6.dir00\QuickTimePlayer.exe.mdmp
    C:\DOCUME~1\MyUserID\LOCALS~1\Temp\WER1cc6.dir00\appcompat.txt
    This problem is same as reported here and hasn't been solved:
    http://discussions.apple.com/thread.jspa?threadID=1370493&tstart=1397
    I have seen this problem appearing on Windows 2000, XP SP2 and XP SP3 with all QuickTime 7 versions (can't tell about iTunes since I don't use it), it didn't bother me because I have no use for QT/MOV myself.
    but.
    I have just installed your latest QT Player 7.60.92 and it craps out with the same error whenever I want to open .mov files.
    And I have downloaded few trailers ranging from small resolution up to highest "HD" resolution from your own Apple website to make sure it is not some encoding compatibility issue.
    I know it is a bug in QT Player itself, so don't tell me please that "my QT got fragmented" or such BS (like the replies suggested in the other thread) or ask about any QT alternative corrupting "official" QT Player since I have no such thing. I am trying to make it work on my mother's computer with freshly installed WinXP (prior updated up to latest patches), machine has standard 32bit intel single core CPU (2.8GHz, 2GB of RDRAM).
    I am really sorry I bought her camera that take those stupid .mov QT videos.
    Apple folks, what's the catch?
    With every crash it creates in user temp directory files like:
    QuickTimePlayer (2009-03-15 16.06.49).dmp
    + folder like WERf743.dir00 with files inside:
    appcompat.txt
    manifest.txt
    QuickTimePlayer.exe.hdmp
    QuickTimePlayer.exe.mdmp
    appcompat:
    Well, too big to post here (~190kB of text) and anyways it just lists files/versions from what I've seen, so its probably irrevelant
    manifest:
    Server=watson.microsoft.com
    UI LCID=1033
    Flags=1674066
    Brand=WINDOWS
    TitleName=QuickTime Player
    DigPidRegPath=HKLM\Software\Microsoft\Windows NT\CurrentVersion\DigitalProductId
    ErrorText=If you were in the middle of something, the information you were working on might be lost.
    Stage1URL=
    Stage1URL=/StageOne/Generic/BEX/QuickTimePlayerexe/7_60_92_0/496279cc/QuickTimePlayer_exe/7_60_920/496279cc/0000130d/c0000409/00000000.htm
    Stage2URL=
    Stage2URL=/dw/GenericTwo.ASP?EventType=BEX&P1=QuickTimePlayer.exe&P2=7.60.92.0&P 3=496279cc&P4=QuickTimePlayer.exe&P5=7.60.92.0&P6=496279cc&P7=0000130d&P8=c00004 09&P9=00000000
    DataFiles=C:\DOCUME~1\My-User-ID-here\LOCALS~1\Temp\WERf743.dir00\QuickTimePlaye r.exe.mdmp|C:\DOCUME~1\My-User-ID-here\LOCALS~1\Temp\WERf743.dir00\appcompat.txt
    Heap=C:\DOCUME~1\My-User-ID-here\LOCALS~1\Temp\WERf743.dir00\QuickTimePlayer.exe .hdmp
    ErrorSubPath=Generic\BEX\QuickTimePlayer.exe\7.60.92.0\496279cc\QuickTimePlayer. exe\7.60.92.0\496279cc\0000130d\c0000409\00000000
    DirectoryDelete=C:\DOCUME~1\My-User-ID-here\LOCALS~1\Temp\WERf743.dir00
    /edit
    Yes, same as in the other thread from year ago, the QT/.mov files play fine in the browsers (I have just check on IE7, Firefox, K-Meleon).
    Message was edited by: -888-

    Look, I had it running _few times_ too until it crapped out and gives the error since (on my own other computers - which I don't care since I have no use for any QT/.mov myself, but I repeat from post 1: I need it working on my Mother's comp).
    And talking about 'bad drivers' - yes, I know that the drivers are sometimes at fault and bad drivers can make entire windoze pc unstable or crash; but how can you suggest this as a cause in this case when I'm telling you that the same error appears on completely different machines? And wouldn't this error appear from begining, from very first use of QT Player if it were bad drivers? Sure it would if it was faulty driver, but since it didn't that's not the case obviously.
    Another pointer that it is NOT drivers related problem is that all other audio-video programs work fine, without errors and problem-free on the same machines, including playback of some of the .mov files with Media Player Classic or VLC - while they crap out with QT Player. If it was any of the drivers for audio or video, directx acceleration, etc - the faulty driver(s) should and would affect other programs as well. Yet all of them work fine and as I said - some even play QT files too (the ones capable of).
    /edit:
    Just to test it I "caved in" and I have installed entire iTunes 8.0 garbage (as suggested by foobula earlier) since I couldn't get just QTPlayer part of it to install separately, and what do you know:
    LO & BEHOLD! same .mov files play fine with QT7, no errors, no problem! (I have opened/closed same .mov files many times).
    Then I uninstalled iTunes and all of its junk,
    removed any traces of it (because it left out - in a Microsft style - plenty of garbage in registry, user appdata folder etc),
    rebooted,
    installed the "standalone" QT Player 7.60
    and hello Apple my darling! - same error is back after just 2 playbacks of very same .mov files!
    (I used Apple's own .mov trailers for testing just to make sure I have "right" quicktime files:
    http://movies.apple.com/movies/weinstein/inglouriousbasterds/inglouriousbasterds -tlr2_1080p.mov
    and
    http://movies.apple.com/movies/weinstein/inglouriousbasterds/inglouriousbasterds -tlr2_480p.mov
    - and I repeat: both played once each fine (haven't play till the end though, but I'm sure that doesn't matter since the problem appears from the start)
    What better proof you need that the problem is only with QT Player in a "standalone edition" (or whatever Apple calls it) and not with any drivers etc?
    As previously, both play fine when links opened in a browsers (so the QuickTime whatever-components responsible for audio and video rendering WORK FINE and its not any "bad drivers" problems, it is just QT Player application's problem)
    Again: (I hate to repeat myself)
    *I don't want any itunes or other junk,*
    *I just want .mov files to open with quicktime player - no more or less.*
    Message was edited by: -888-

Maybe you are looking for