Project configuration missing

I created my project in netbeans 5.5 and openned it once in 6. Then, I can not see my configurations any more in 5.5
anyway to solve this?

Hi Norven,
Based on your first and second screen shots, it seems that they are not the same project, the first one is the MFC project, but your second one is the server property.
Could you share us a simple VS2010 sample? I will test it using the VS2012.
I create a MFC app in VS2010, and then I open it in VS2012, I get the warning to updated the compiler like the screen shot. Click “Update”, and then right click the project like B (note: not right click the solution like A) in solution explorer like the
following screen shot, so it works well in my side.
Or you could create a new same project type like MFC app in your VS2012, and then view the properties of this project, if it still has this issue, I doubt that it is your VS IDE issue.
But if the new VS2012 project works well, but your VS2010 project has this issue in VS2012, one possible reason is that your project doesn’t merge successfully. Please clean and rebuild your project, and check whether you get any warning or error message.
Another possible reason is that you didn’t install the VS2010 sp1 for your VS2010.
Of course, please also make sure that you check the project’s properties not the solution properties.
If all projects include the new VS2012 projects like the MFC apps still have this issue, I doubt that it is your VS2012 IDE issue.
If still no help, please let me the latest information in your side, maybe you could share me a simple sample with one drive.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Debuging projects configured as Library?

Hi all,
may be this topic has been discussed before but I
couldn't find anything in the archive.
When I configure a project as Library and try to
Debug the application locally it doesn't stop at the
breakpoint. If I step into a specific method from
that project the breakpoint is there but Forte seems
to disregard it. Did anyone experience that before?
Is there a specific flag for debuging projects
configured as libraries? Or I am just missing or
misunderstanding something?
Thanks for any help!
Rumen
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

As an example I exported the project 2013-02-05 and the exported library has the smart albums
Original
Exported

XMLBeans build aborted because project was missing Java nature.

I always get this project level error in an OSB Project in Workshop whenever I add XMLSchema resources to the project and try to create XQuery Transformation resources. The project is then unusable and may not be deployed to OSB. I have tried adding the Apache XMLBeans and Java 6.0 facets, but that does not eliminate the problem. I can delete the project, create a new project, and copy all of the files from the old project to the new project but, as soon as I attempt to edit the XQuery Transformation, the error returns. The OSB Project in Workshop is, essentially, unusable if you want to add XQuery resources to your project. An OSB project without XQuery resources is just a Webservice, so using OSB isn't necessary. The only thing we have found that works it to edit the project in the OSB console.
The full error string in the Problems View is:
XMLBeans build aborted for project XXX because project was missing Java nature.
Any workarounds? Solutions? Configuration changes?
Edited by: TWhitehead on Dec 16, 2009 2:35 PM
XMLBeans build aborted because project was missing Java nature.
Edited by: TWhitehead on Dec 16, 2009 2:36 PM

FYI... This issue was a result of installing WLI 10gR3 into the same HOME as OSB/ODSI 10gR3. I am able to publish the projects iwith the error into a local WLS but can not export into a jar file for import into a seperate WLS. I would like to keep WLI and simply "fix" the java nature issue if possible.
Thanks in advance

XMLBeans build aborted for project ...project was missing Java nature.

I always get this project level error in an OSB Project in Workshop whenever I add XMLSchema resources to the project and try to create XQuery Transformation resources. The project is then unusable and may not be deployed to OSB. I have tried adding the Apache XMLBeans and Java 6.0 facets, but that does not eliminate the problem. I can delete the project, create a new project, and copy all of the files from the old project to the new project but, as soon as I attempt to edit the XQuery Transformation, the error returns. The OSB Project in Workshop is, essentially, unusable if you want to add XQuery resources to your project. An OSB project without XQuery resources is just a Webservice, so using OSB isn't necessary. The only thing we have found that works it to edit the project in the OSB console.
The full error string in the Problems View is:
XMLBeans build aborted for project XXX because project was missing Java nature.
Any workarounds? Solutions? Configuration changes?

This is a strange error, because OSB projects do not use facets/natures/builders provided by Eclipse for any resources within the project. OSB has its own mechanism for validation on OSB Projects, so it's surprising to see any error messages from an XMLBeans builder relating to the Java nature.
Can you look at the OSB Project's properties and see if there are any facets/natures/builders/validators on the project?
The only builders should be:
- Faceted Project Validation Builder
- Validation
The only facets should be:
- AquaLogic Core Facet
- Oracle Service Bus
The following Validators should be disabled:
- WSDL Validator
- XML Schema Validator
Thanks,
Nadeem

Boot data configuration missing or with errors

I have a Satelllite L870-15W, and no way to turn the system on.
All it says is "Toshiba" (the welcome screen) and then (after having pressed f8 or f9):
file: efi/micorsoft/boot/bcd,
status 0x0000001;
the boot configuration data for your or is missing or contains errors.
I have only recovery partition at D: but cannot access it. What shall I do?

Satellite L870-15W (PSKFNE-00700CHU) <- Hungarian version
Spec here too.
boot data configuration missing or with errors
It probably means the BCD is missing or corrupt.
To repair this, you need to access the recovery environment. Microsoft says Windows 8 will eventually take you there if it fails to boot many times. You can also get there using a System Repair Disc or a Windows 8 installation DVD like this downloadable one. You need the 64-bit disc.
It's possble this will also work on your Toshiba machine. Restart the computer by pressing the power button and immediately start tapping the F12 key until the Boot Menu appears. Using the arrow keys, select <HDD Recovery>.
WinRE looks like this. Select Troubleshoot and then Advanced options.
Lots of things to try. See KB2622803 for boot sector problems. The article assumes Windows Vista/7. The same fixes look different in Windows 8, but are all available.
If Automatic Repair (Startup Repair in 8.1) and System Restore fail, use the bootrec tool at the command prompt. This applies to Windows 8 also.
   Use the Bootrec.exe tool in the Windows Recovery Environment to troubleshoot and repair startup issu...
Don't give up until you have tried replacing the BCD itself as follows. (Sometimes the partition is not named "c" and you need to try another letter.)
   c:
   cd boot
   attrib bcd -s -h -r
   ren c:\boot\bcd bcd.old
   bootrec /RebuildBcd
-Jerry

Screen Configuration Missing

Hello All,
We have upgraded from CRM 4.0 to CRM 5.0.
As a result SAP have deleted CRM001 (Sold-to Party) and created CRM000 (Sold-to Party).
All the config. as part of the upgrade process seems to have been copied across except the screen configuration.
We have 13 roles with screen config. in CRM 4.0, when we upgrade to CRM 5.0 we have only 12 roles with screen configuration. The missing one is Sold-to Party.
Has anyone come across this before and know how to resolve it?
Regards
David

Thanks Paul.
I might be missing something with these notes.
With 873634 is seems to be saying that prior to 5.0 roles such as Sold-to Party, Payer etc were not stored in BUT100 therefore the program supplied with this note (which short dumps incidentally) is used to copy the roles to BUT100.
I have copied this prog. and modified it to copy our CRM001 roles to CRM000 so we still have our customers post upgrade but I am not sure this is what I should be doing becasue all our transactional data such a change docs will hold CRM001 in the database tables.
But the original issue is the screen configuration missing. Looking at these notes does not appear to resolve this.
914437 seems to be saying make changes in R/3.
Regards
David

ISG Debug - IP configuration missing for radius proxy session initiation

Folks,
We are trying to configure the ISG as a Radius-Proxy for EAP Authentication. I have configured aaa server radius proxy, clients and aaa auth radius-proxy group as per the guide. I have my interface config as follows:
interface TenGigabitEthernet0/2/0.205
encapsulation dot1Q 205
ip vrf forwarding CS
ip address 10.20.0.1 255.255.224.0
ip helper-address global 172.X.X.X
no ip redirects
no ip proxy-arp
ip tcp adjust-mss 1420
service-policy type control DEFAULT_RULES
ip subscriber l2-connected
initiator dhcp
initiator radius-proxy
arp ignore local
When I try to connect a wifi client to an AP, I can see that the AP is forwarding the Access-Request to the ISG but the ISG does not forward it to the AAA. In the ISG debug I see the following message:
RADIUS: IP configuration missing for radius proxy session initiation
Can any one help to identify what is missing here pls?
Thank You in advance!

Kiran,
Did you follow this guide? It looks like the interface configuration is there but you didnt include the actual radius configuration does it follow the guide here -
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_radius_proxy.html#wp1055053
Thanks,
Tarik Admani

TutWD_FlightList_Init .project file missing

Hello,
I am trying the TutWD_FlightList_Init tutorial.
I have downloaded the project.
For the first time I could successfully import this project into my workspace , however while creating model i was getting jjava.lang.NullPointerException.
So also when I tried to import this project for the second time into my workspace , while importing it said .project file missing.
Can anyone suggest the possible solutions to resolve the issues I am facing.
Thanks & Regards
Pooja

Hi,
Removing the .metadata folder and restarting NWDS fixed my NWDS as well.
I think you have to downloaded TutWD_FlightList_Init this application in SDN right. May be that application having some problem you can create application in own way. I think you are new to webdynpro JAVA right. Please read this [Document|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/web-dynpro-java/_web-dynpro-java/WDJava%20archive/Creating%20a%20Web%20Dynpro%20Application%20Accessing%20ABAP%20Functions.pdf]
[Web Dynpro Java Sample Applications and Tutorials for SAP NetWeaver 2004|http://www.sdn.sap.com/irj/sdn/nw-wdjava?rid=/webcontent/uuid/503f22f6-b978-2a10-bf97-ddc21267e752]
Hope this helps!!
Best Regards
Vijay K
Edited by: VijaySAPEP on Feb 21, 2012 5:28 PM

Managing several project configurations

Hi!
Being a newbie with Sun Studio, but not exactly with programming, I have a question regarding project configurations.
Currently, I have a group of projects configured as dynamic libraries, the number may grow up to between 10 and 20. I want to be able to switch to static libraries, or even have both. Is this possible in a centralized way, so that I can change the type of the library in one place instead of in every project? Or perhaps even share project configurations?
I could write my own makefiles or do something similarly murky behind the scenes, but then I'd sort of break the idea with a neat automated build system via the IDE.
To make things simpler, the libraries are either all dynamic or all static, I don't need to mix both types.

I'm almost positive that nothing like that exists in the GUI. If you can
find a way to add an include Makefile into the auto-generated makefile
you might be able to add some hooks there. But I don't think that's
supported yet. Did you file an RFE at bugs.sun.com?

"Final Cut Events/Projects" folders missing

So I upgraded to Mavericks over the weekend and things were going great for a while. I wasn't experiencing any of the known issues that other people were experiencing after the upgrade.
But then I clicked the Movies tab in finder and realized that my "Final Cut Events" and "Final Cut Projects" are missing! The backups folder is still intact, as well as my libraries, but those folder are missing. I've searched thoroughly around my MacBook and cannot locate them.
So I guess I'm wondering: is there away to recreate these folders? I can still access events and projects from within Final Cut Pro but the only way to get to the events or projects is by right-clicking on a library in the Movies tab and selecting the "Show Package Contents" option.
This is my first post on the forum because I am literally puzzled and have spent many hours searching for a solution to no avail. Any and all help would be greatly, greatly appreciated. Thanks guys.

Mark, thanks for lending a helping hand. Truthfully, I don't rememeber that option when I upgraded. There was nothing too important in the folders, as I store the larger projects on my Time Capsule and try to delete old events as I complete the projects. However, when I now import footage, the events are only created in the designated FC library. Those folders don't exist on my computer anymore and they are not in the trash. Is there a way to recreate the folders or did I completely ruin FC? Thanks again for your help, it means a lot.

Monthly photostream project images missing

Went to look for a photo in one of the monthly projects that photostream creates, and almost all of my images are gone. There are only a couple of images left in each monthly project. I manually recovered those that are still in the 1000 on photostream, but everything prior to that seems to be gone. Any ideas? Thanks.
Aperture 3.4.3

Are the Photo Stream projects the only projects with missing images? That really should not happen.
I'd make a backup of the Aperture library and then try the Aperture library first aid:
Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual

PE7: Project Presets missing

I searched for previous threads on this topic and performed the recommended steps to fix it:
1. Tried reinstall>restart.
2. Tried uninstall>restart>cleanup>restart>install>restart
3. Deleted pref file and forced PE7 to create a new one.
None of the above steps helped. The project presets are still missing when I try to create a new project. I am forced to stick with 'DV NTSC Standard 48khz'. Can someone help me with this? Maybe someone can upload their presets in a zipped file and tell me where I should unzip them in my PE7 install structure.
Windows XP SP3, Pentium 4 processor, 1GB RAM.

Hi Bill,
sorry for the mixup...there was 2 threads working on this.
This thread....
Re: PE7: Project Presets missing
I was posting in this one.
This thread has the answer....
Mar 11, 2009 4:35 PM
Premiere Elements 7 missing project settings...
17. Sep 11, 2009 2:25 PM in response to: (Jeff_Fabiani)
Re: Premiere Elements 7 missing project settings...
See the last post on this.
Hi all,
There is an even easier way to do this - avoiding the installation and all
that... Just follow the steps below:
1) Download the Premiere Elements 7 trial version from adobe.com (or even
better - I have attached the file to this post)
2) Run the extractor but cancel the install-process. Now all installation
files are extracted in a folder. In my case I extracted to "\desktop\Adobe
Premiere Elements 7"
3) Open the folder '\Adobe Premiere Elements 7\CoreTemplates' with in the
folder you extracted to.
4) Extract the file 'settings.zip' to a folder of your choice
5) Now copy the folder (and subfolders) with the same language code of your
PRE7 installation (In my case I copied the 'en_US' folder) into the Adobe
program folder in a subfolder you name 'Settings'. (In my case running a
danish windows the path is 'C:\Program Files\Adobe\Adobe Premiere Elements
7.0\Settings'
When finish you shold have a folder called 'C:\Program Files\Adobe\Adobe
Premiere Elements 7.0\Settings\en_US' with subfolders..
And voila - settings is back in the startup window...
/cyberiote
Hope this clears things up.
Ian

Open projects with missing assets

When opening a project, with assets that have been deleted from the computer, the process is rather slow, as DVD Pro checks computer for all the missing assets individually. This is specially irritating when opening old projects with assets deleted, but which are kept for configuration reference.
Is there a way around this, or should I just learn some patience?

You may have to change the way you work/save projects.
You could replace your project assets with "dummy" assets(this keeps the button layouts, etc.) before you save it. That way on the next similar project you do a data replace. Or just enjoy the quality time of "re-linking" and data replace.
The "placehoder or dummy asset" works good for me.

Also unable to run project.. missing main.html?

Screenshot of error dialog attached. Any suggestions? All I did was open an AI file and ran project.
Thanks,
Mark

This seems to be configured in an ini file located at C:\Program Files (x86)\Adobe\Adobe Flash Catalyst CS5.5\configuration\config.ini
[email protected]/Application Data/Adobe/Flash Catalyst CS5.5/workspace
[email protected]/Application Data/Adobe/Flash Catalyst CS5.5
[email protected]/Application Data/Adobe/Flash Catalyst CS5.5/configuration
Can anyone tell me where the variable @user.home is defined and whether I can change it or not? I might find that some of the other applications might experience this same issue

Dynamic configuration - missing files

Hi,
during processing of message Dynamic Configuration is used.
Inside SOAP response is written file name and Directory where file should be generated.
But file is missing..
Message seems to be processed successfully.
Any idea what could happen?
M.

Hi,
>>>Inside SOAP response is written file name and Directory where file should be generated.
if this is a reponse you're doing request response beans ?
>>>Message seems to be processed successfully.
have you checked for any errors in the channel too or only message monitoring ?
do you see the message in the MessagingSystem monitor ? what is the audit saying - was the file generated ?
Regards,
Michal Krawczyk

Project configuration missing

Similar Messages

Maybe you are looking for