Project wise profitability analysis

Hi
I have to create MIS for project wise profitability analysis .  In sales order we used additional tab as project and we assigned projects to each and every sales order
Now they want one Report "Project wise profitability analysis" . So i have do that through Infoset (Lis)
Please tell me what are the charecteristics & what are the keyfields to select to get the cost
(i want material number - Planned cost - Actual cost - variance)
Rgds
pradeep

Hi,
This is standard report to get acutal cost and  planned cost and variance.
S_ALR_87013532 - Plan/Actual/Variance
S_ALR_87013566 - Actual Contribution Margin
S_ALR_87013568 - Project Results
Regards,
Chandra

Similar Messages

  • Project-wise vendor analysis

    Hi Friends
    I am new to this area but I am required to acquire the knowledge in PS.  My current requirement is:
    1)  Is there a report whereby we can have information project-wise vendor transactions in Project System module ?
    2)  I want to know more about CWIP relating to Project systems.
    Please help me out.

    Hi
    Thanks for the prompt response.  Result analysis is only a part of the periodic activity for the ongoing work, I presume, to know that how much is still pending to be completed and how much completed, right ? 
    I am already started reading the sap.help.  Thanks

  • Profitability Analysis for Project and Project Team

    Hello Experts,
    Need your ideas and expertise to the below business case, could be simple or complicated, please provide some insight.
    the business case is like this. 2 specific project teams are available. there can be around 10 projects executed in a year. So in our PS we can have project team allocated to a project. workforce planning is done for the project for effective utilization, it is like 2 projects with 2 teams assigned. till now it is fine. the business calls for that 1 st team is assigned to another project only after closure of the assigned project.
    Let us assume P1, P2,...P10 are the projects in a year. Assume T1, T2 are the teams available. Initially T1 is assigned to P1, T2 is assigned to P2.
    Business confirms that T1 will be assigned to P3 only after completion of P1. This requirement is also straight. Assume that team T1 has executed 6 projects and team T2 has executed 4 projects.
    The requirement is profitability analysis at project level i.e at P1, P2, ...P10 which is also pretty straight. Business requirement is also to have profitability analysis against each team i.e for T1 and T2. it is like each team has a project lead and team assigned under him. based on the expenses and revenue booked against the team, there will be performance evaluation of the team.( assume that P1, P3, P5, P6, P8,P9 are the projects executed by team T1, we need to have revenue and expenses of the said projects to be mapped to team T1 as well), so we have profitability analysis at team level.
    Experts, require your advice on how to map the requirement. Is there any possibility to map projects to team rather assigning team to a project. please advice. provide some insight on how do we map the scenario.
    Regards,
    Murthy

    Hello Murthy,
    In SAP you carry out Month end closing activities. In order to carry out this activity, you post all period based data on the project. Subsequently data relevant for Profitability analysis can be determined for the given period and then this data can be settled to COPA.
    This data can be evaluated in the project information system or in Profitability analysis.
    You can check report KE30 for Profitability Analysis.
    Refer SAP help for more details
    http://help.sap.com/saphelp_erp2004/helpdata/en/7a/4c3aad4a0111d1894c0000e829fbbd/content.htm
    Regards
    Tushar

  • Project wise Profit & Loss account.

    Dear All,
    Our sales are routed through WBS Element and cost is booked against Cost Center.  Our Management wants to see project wise Profit & Loss account.  Any suggestions on deriving this??
    Regards,
    Mike.

    Hi,
    You can acheive this through Profitability Analysis by assigning WBS elements as one of the Characteristics,
    since there could be more than one wbs element in a particular profit center.
    Point 1:- WBS element profit or loss can be interpreted only when it has booked the cost as well as revenue in the same period
    Point 2:- IF any thing for which cost or revenue alone is booked then that should not be considered as loss or gain.
    Point 3 Profit center wise Balance sheet is possible where as WBS element is a part of profit center.
    regards
    N.Kumar

  • Re Supplier wise Quality Analysis Report

    Hi Gurus,
    In my project for QM module we have one report "Supplier wise Quality Analysis". For this inspection lot is restricted with 01 type. Now the issue is in the report it is showing rejected material (i.e Code Group- GR, UD Code - 005 ) l.... I have restricted the code group wirh GR and code with accepted UD Code (001,002,003,004) at query level . But still i am getting rejected lot in my report.. So please explain me what to do to stop the Rejected material in Supplier(Vendor) wise qulaity analysis report...
    Thanks in Advance
    Srinivas.M

    Hi,
    Instead of including UD codes 01,02, 03, 04 try to exclude the code 05 might help you

  • Model wise profitability report

    Hi,
    As per our new client business requirement(Bus manufacturing company) we can define division specific sales organization. Here product groups are treated as division.  We have models of finished goods (Vehicle). In vehicle finished goods there are 9 models. These 9 models are treated as profit center and vehicle is my business area. Because these 9 models(divisions) are sub part of finished item Vehicle. It means customer orders belongs to that 9 models for that vehicle which we can track the customer order as per model wise. This is the scenario.
    In that scenario If Component/Material A is used in two Models Naya and Intea then which Profit Centre  to be entered at Material master level and how do we get  Profitability analysis for both Models ?
    Best Regards,
    Samrat Roy

    Hi
    I would not prefer to have Model wise Profit center because that would cause problem which you are facing... If a materal is common, then you need to create Common PC also
    Product Group can give you Model wise Profitability from COPA or PCA....
    PC for Models should be created when the Investment made for each model is separately identifiable i.e. the Production facility, Capital employed, etc
    I would also not recommend Model wise Division in SD because you will end up maintaining huge amount of Master data... A product group and Product hierarchy should suffice
    br, Ajay M

  • Sales Oppourtunity Project Wise

    HEllo Experts,
    Is it possible to have sales  oppourtunity analysis project -wise?? If yes... how?/

    Hi Divya.......
    Via FMS would be possible............
    Regards,
    Rahul

  • Cost Center wise profitability

    Hi All,
    We want the profitability analysis cost center wise. Is it possible? If yes, how the Revenue value, sales quantity and the COGS value can be derived for the cost center wise report in KE30.
    Please help me as my client has asked this requirement.
    Regards
    Subbu

    Hi Subbu,
    Cost center wise rofitability is possible in COPA.
    Create Cost center as a characteristic in the COPA structure.
    The client has to  on what basis the revenue and costs will be divided among cost centers.
    It is unusual / Impractical to have Cost center wise Profitability statements as in SAP , Cost centers are used for Overhead  Cost control and Management.
    Enjoy
    Siva

  • Costs of the product calculation lack in the profitability analysis

    Hello there,
    A group of students and I are currently working on a SAP project which is about to implement a full cost accounting in the SAP system (ERP). At first we used a case study reading (Friedl,Hilz,Pedell), some important components for calculating the products like u201Ccosting sheetu201D, u201Ccost component structureu201D and u201Ccosting variantu201D do exist already.
    For our project we had to insert an additional primary cost center. For that reason we also added new components (the above given ones). After that the costs for our products could be calculated in the right way. We also booked supplies and stated the quantity of sales. Our problem is that the Profitability Analysis (CO-PA) does not show any costs of our cost centers (material input, manufacturing costs, overhead costs) only the earnings. We did not add any u201Cattributesu201D, u201Cderivation rulesu201D or u201Cvalue fieldsu201D but fulfilled all requirements in the Customizing menu (u201CAssign costing key to productu201D, u201CAssign costing key to productu201D, u201CAssign value fields for cost component structureu201D).
    The first time when we used the case study reading and therefore another company code everything worked fine. We think that the problem might be that the costing key is not attached to the products.
    Thank you for any help and suggestions,
    Kind regards!

    In the same area as where you assign the costing key to the product, there is also an entry where you need to define the costing key. You don'tr mention that you have done that.
    In the user menu for Profitability Analysis, there are also a lot of tcodes that will help you investigate the flows of values and derivation of characteristics. They are very helpful in most cases.

  • REO Profit. analysis//5  Profitability Analysis

    Hi Expert,
    I am facing an issue on controlling document, when i do posting in WTY (warraty module) in DBM project (SAP R/3).
    My FI doc is posted to correct profit center but when i check on controlling document, it show "REO Profit. analysis//5  Profitability Analysis". Other controlling document will show correct internal order number.
    Is this issue related to Profitability Analysis? As i did not activate profitability analysis in DBM ERP.
    Please advice is there any configuration i missed out?
    Thanks.
    regards,
    chuan

    Hi
    This issue arises when category 11 or 12 cost elements are posted w/o a true CO object i.e. you enter only the PC as the account assignment obj for revenues
    Make message KI 166 as E in OBA5.. You wont be allowed to post w/o entering a true CO object (Like IO, PSG etc)
    As of now, you can modify the CO object using KB61 for the posted docs
    br, Ajay M

  • Regarding CO Product wise profitability

    hi,
    Actually can anybody tell me in CO , system provides us report for productwise profitability, Is it calculate on moving price of product, because we have one requriement where client asking for batch wise/product profitability(not using av, moving price)
    Can anybody help me out for this,
    Thanks

    hi
    yes u will get productwise profitabilty statement in Costing based CO-PA. u can use either moving average or standarad price or u can define ur own costing varinat for calculating material prices only for the purpose of profitability analysis.
    regards,
    siva

  • Product wise profitability

    Hi,
    My client want product wise profitability, so pls suggest me what all settings are required in COPA to get the produt wise profitability.
    Thanks

    Yeah. But you need to pay attention to the number of material master. If you have millions of material master, it would be too much for segment level characteristics.
    Analysis/reporting is normally necessary for finished products (FERT). Usually, reporting drilldown (segment level char) is done at product hierarchy 1 or 2 levels. PH1 PH2 may need to be converted from PRODH Product Hierarchy by using derivation rule (move initial several characters to PH1 PH2).

  • Project Wise -- Vendor Liabilities Aging

    Hello Experts,
    How to see project wise "Vendor Liabilities Aging" report. If it's available through query Please share the query. Please help me in this issue.
    Regards,
    Umamahesh.

    HI
    When you click the "Vendor Liabilities Aging",you will get a selection criteria window..
    After selecting the criteria and clicking 'OK' will get you a report right..
    When you get the report,click "Form Settings" window and in 'Table format',you will find 'Project Code' which made invisible by default,so you make it visible by clicking the 'Visible' check box..and click ok...
    Then the project code also appear in that report...
    Got it?..revert me for any clarifications...

  • Report for invoices project wise

    Hello All,
    I need a report where I can see the invoices project wise i.e (PS module and SD module)
    I am looking for invoices details project wise is there any standard report which I can check that how many invoices have been raised for  a particular project or a particular sales order.
    Thanks in advance,
    Priya

    Hi
    You are not getting the fields in FBL5N or not getting the value in them?
    If you are not gettng the fields,
    1. Go to SM30 - Table V_T021S...
    2. Include BSEG-FIelds Sales Order and WBS Element as special fields
    3. Generate the transport request and transport it to PRD
    4. Execute SE38 - RFPOSXEXTEND in PRD client
    Now when you execute the report, it should show you those fields..
    BR,Ajay M

  • Order value fields by field label in the profitability analysis document

    Hello,
    I am displaying a profitability analysis document and I want to order the value fields by their technical name (VV001, VV002, VV003...) instead of in alphabetical order (the system orders them by the field label).
    Is it possible?
    Thank you very much
    Bea

    Hello,
    Check in KE4M whether sd condition type FKLMG  is mapped corresponding value field in COPA.As you are getting the value for other company codes, this setting should be there.
    You can also try checking simulation of billing document transfer through KE4ST. Check the details analysis
    thanks
    Hari

Maybe you are looking for

  • How to make the cursor global if it has parameters that would be passed through calling environment

    What I am trying to do is: 1. Pass two dates "p_start_date" and "p_end_date" to a procedure "calc_percnt". Based on these two dates the procedure creates a collection that has ticket info between the date range provided. 2. Iterate through this colle

  • Business catalyst won't let me set up email  with .media extension

    I have this domain - www.thinkchurch.media that I am using with a business catalyst hosted site. It will not let me set up an email with this domain for some reason even though I have the right hosting plan. It says, "This cannot be an email address.

  • Calendar Time Problem

    Hi, When I sync mi iphone 3gs with outlook 2007 calendar, it does, but the time for the event on my iphone shifts by one hour. Example: I create an appointment for today at 3:00PM on outlook, after the sync, it appears at 4:00PM on my Iphone and vice

  • Ask about import and instruction which i don't understand.

    Hi, I am very new to java. please help.. I want to run some example in some sites i found. but some time i found that the sample requires or need me to download the included library in order to run the code successfully while i don't know what, how a

  • Imports  problem

    HI 1.in import process, i have created PO and taxes are cvd,additonal duty,education cess on cvd 2.and i have done MIRO 3.in the capturing excise invoice CVD is converted as BED and what about cess and additional duty? need help Edited by: sdnguna on