Proper order for MonitorEnter, MonitorExit?

Looking at byte code generated for a synchronized block I see that the order seems to be (assuming I'm reading it right):
MonitorEnter
try
    ...codeblock...
catch
    MonitorExit
    throw Ex
MonitorExitI had been doing it with the monitor enter/exit INSIDE the try block (and with a monitor exit inside the catch). Why is it better to put them outside a try...catch?
Edited by: 6tr6tr on Apr 16, 2008 10:56 PM

1. Folio Producer tools
2. Folio Builder tools
http://help.adobe.com/en_US/digitalpubsuite/using/WS67cb9e293e2f1f60-21ba9a4512e5e5e0b8d-7 ffe.html

Similar Messages

  • TS2512 i m trying to convert dpx files to mov in colour 1.5.3 but in file browser files are not seen in proper order for ex files names are 12345 it is coming as 23145 bcoz of which in output also its coming in wrong order

    i m trying to convert dpx files to mov in colour 1.5.3 but in file browser files are not seen in proper order for ex files names are 12345 it is coming as 23145 bcoz of which in output also its coming in wrong order

    1) What you downloaded should be a packed file (zip, tar.gz, etc) that needs to be unpacked into the directory of your choice.
    2) & 3) are answered by Ant's installation documentation (the page you're quoting from):
    http://ant.apache.org/manual/index.html

  • Proper order for new tools install

    Could anyone help me with the proper order to install all the components of the latest update?

    1. Folio Producer tools
    2. Folio Builder tools
    http://help.adobe.com/en_US/digitalpubsuite/using/WS67cb9e293e2f1f60-21ba9a4512e5e5e0b8d-7 ffe.html

  • Weird entry in the exception table for monitorenter/monitorexit

    I've created a simple test class with one method:
    public class TestClass {
         int a = 0;
         public void test() {
              synchronized(TestClass.class) {
                   a = 1;
    }After opening the generated class file with Eclipse I got the next
    result (I've removed the parts that are irrelevant)
    public void test();
    0 ldc <Class TestClass> [1]
    2 dup
    3 astore_1
    4 monitorenter
    5 aload_0 [this]
    6 iconst_1
    7 putfield TestClass.a : int [12]
    10 aload_1
    11 monitorexit
    12 goto 18
    15 aload_1
    16 monitorexit
    17 athrow
    18 return
    Exception Table:
    [pc: 5, pc: 12] -> 15 when : any
    [pc: 15, pc: 17] -> 15 when : any
    I do understand that after the monitor is entered it is very important that it leaves it again with the instruction monitorexit. In normal case where no exceptions occur it will call monitorexit at the address 11. But if an exception occurs it has to make sure monitorexit is called and therefore the exception table defines in the first entry that on any exception the VM jumps to address 15. Until here everything is understandable, but what is the second entry in the exception table telling me? if an exception occurs betweern 15 and 17 then jump to 15 ... doesn't this cause an endless loop?

    Just saw this topic, have you investigated this further? I agree it's weird, and maybe would've gotten more attention in the compiler forum, because it's not really a VM issue...
    The bytecode in your OP also differs from the example given in JVMS chapter "Compiling for the Java Virtual Machine", section 7.14 Synchronization: http://java.sun.com/docs/books/jvms/second_edition/html/Compiling.doc.html#6530
    In particular, the first monitorexit instruction is not covered by the "finally" handler there. In your example (and some produced with javac 1.6.0_01), it is. Now when one of the monitorexit instructions throws, the bytecode emitted by javac will keep retrying monitorexit until it finally succeeds (assumed that this is possible), only to immediately throw an exception that indicates that the monitorexit instruction failed?! I hesitate to call it a paradox for some other reason, but definitely very strange. It's also interesting to note that in all the test classes I looked at (and your example, too) a simple decrement of "end_pc" by 1 in the respective exception table entries would be sufficient to achieve a somewhat sane behaviour...

  • Proper software install order for MS-6341

         What is the proper order for loading chipset drivers, etc. after installing the windows 2000 professional operating system for the MS-6341 motherboard ??
         Does the 4 in 1 drivers include everything that has to be install for proper operation and what boxes should be installed during the 4 in 1 install or is it necessary to install the AGP software assuming an AGP video card is being used ??
         Thanks.

    i work for a small oem computer company and we found that if we install the 4in1 first and then the sound and then finally the video. does it make a difference? not sure but thats how we do it. hope it helps. almost forgot.... if it is a via northbridge chip then yes install the agp driver, even with on board video you will want to install it. usually running it with default boxes checked is the best.

  • Internal order for AUC with cost center - 'Please Select proper plant code'

    Hi All,
    User is getting error 'Please Select proper plant code', while inserting 'cost center' in field 'Responsible CCtr' for new Internal order which is for AUC.
    In Devlopment server also when we try to create asset through internal order we get same error.
    For your information this is new Plant, profit center and cost center for which we are trying to create internal order for AUC.
    If we try to post without Cost centre entry is saved. But we want to add cost center.
    Please help to resolve.

    Hi,
    If it is a custom message then please check whether any Validation or USer exit is maintained for the IO master data. If yes, then update the cost centre accordingly.
    Regards
    Sreekanth

  • Extension of input fileds in Sales order for account assignment

    Dear Gurus,
    Can anyone tell me how to extend input fields like Statistical order(COBL-AUFNR)  and cost center(COBL-KOSTL) in sales order for accounting assignment and these fields have to be ready for manual entries. The order types are ZHGA and ZHV.
    Which program has to be modified and how it can be modified?
    Thanks a lot for help and advice.
    Cheers,
    Ricky
    Edited by: Ricky.Martin on Apr 23, 2010 10:45 AM

    Dear Rajendra,
    There is a manual change for tax classification for material master in va02 initially it was blank now it is changed to ' 0 ' is any way influencing....?
    Definitely material Tax classification will influence to determine the Tax code.
    -->So Make sure that customer and material master having proper tax classification indicator.
    -->Have you Update the price after changing the tax classification in the sales order.by going to item dat -->condition tab then click on Update push button bottom of the conditions screen.
    -->Once again the check the condition record maintanence also for your MWST access sequence.
    I hope this will help you,
    Regards,
    Murali.

  • I get an update server error message when i try to update my phone. I've uninstalled iTunes and all related software in the proper order and then reinstalled with security software disabled. no what?

    I could use some help. Apple support walked me through the uninstall and reinstall of all iTunes and Apple files in the proper order with my security software disabled. I still get the following message:
    "The iPhone software update server could not be contacted. Make sure your network settings are correct and your network connection is active, or try again later."
    Any ideas? I'm on a Dell i5 Core with Windows 7.

    C Mawle wrote:
    Thanks.  I have followed all the instructions as recommended and nothing has worked so it looks like the restore/update may have been interrupted - would loss of internet connection do this?
    Yes it would, possibly even brick it.
    Have successfully connected my ipod nano with iTunes so looks like the device driver is working.
    Can I use my ipod nano USB connector to check?
    It is not much help to you, since the device that you need still not recognized.
    Anyway looks like I may have to swallow the loss of data.  Have set-up a call for tomorrow with Apple support so will wait until after this before doing the factory restore!
    Good luck, but if you expect miracle from that call good luck again.

  • In sales order for the condition type MWST, **Tax code** is displaying wron

    Hi
    In sales order for the condition type MWST, *Tax code* is displaying wrongly at header level i.e. FF instead of AO (under account determination tab)
    AO tax is 0% but for FF it is 19%
    I have checked with the Access sequence it is picking access 08 correctly according to this it should show AO in tax code field for MWST but it is not so..
    There is a manual change for tax classification for material master in va02 initially it was blank now it is changed to ' 0 ' is any way influencing....?
    Even if I consider material tax classification and customer tax code  should not be FF because  tax code  FF is not maintained for the combination of access sequences for condition type MWST
    Please help me.
    Rajendra Prasad

    Dear Rajendra,
    There is a manual change for tax classification for material master in va02 initially it was blank now it is changed to ' 0 ' is any way influencing....?
    Definitely material Tax classification will influence to determine the Tax code.
    -->So Make sure that customer and material master having proper tax classification indicator.
    -->Have you Update the price after changing the tax classification in the sales order.by going to item dat -->condition tab then click on Update push button bottom of the conditions screen.
    -->Once again the check the condition record maintanence also for your MWST access sequence.
    I hope this will help you,
    Regards,
    Murali.

  • G/L Account problem in Sales order for downpayment

    Hi,
    While creating sales order for down payment with billing plan as milestone billing, I am getting error of G/L account assignment while saving.
    Please help to resolve the issue.
    Thanx in advance.
    Anup

    hi,
       First u need to check whether proper coniguration is there for GL A/C determination as suggested by my friends in above given thread, If everything is ok there then check in Customer master data for ACCOUNT ASSIGNMENT GROUP is maintained or not and also for MATERIAL MASTER DATA for the same.
    Regards
    AJIT K SINGH
    HAPPY TO HELP U

  • Setting nedded for creation of Planned Order for Dependent Requirement.

    Hi PP Gurus,
    I have a one material for which I m running MRP which have three Components.
    I m using strategy 10 for FG and SFG also.
    When I m running MRP for FG the system is creation planned order for FG, but not for SFG even though no stock available for them.
    I m using lot size EX for all SFG.
    Please Help.
    Thanks in Advance.

    Dear ,
    You should maintain proper MRP related parameters for both FG and SFG.Check all the MMR parameters :
    1.MRP Type -PD for FG/SFG
    2.Procurement Type -E  for FG/SFG
    3.Planning Startegy -10  in FG
    4.BOM/Routing Explosion -Keep it Blank
    5.Indiviaul/Collective Indicator -not applicable as it is MTS  so keep it blank
    6.Validity of BOM /Routing should be corrcet before MRP run in MD02-NETCH , 2,1,3,3,2
    7.What is the Lot Sizing Set up-EX in OMI4-Scheduling Tab -Requirement date =Delievery Date and BOM Validity Date  .
    Ref .Re: MRP not plalned for dependent components
    8.Check in MRP4 -MRP Dept Requirement Parametre should be balnk for plalling the SFG  in MMR of FG -MM02
    I hope this issue may be with BOM explosion as per the validity and lot size -schedueling set up .
    Hope this will be useful
    Regards
    JH

  • In order to properly play my music on my DAC with a headless mac mini, I had to "check" the tunes in iTunes. When I did that, the songs in each album were put in not their proper order. How do I restore them to their original sequence in each album?

    In order to properly play my music on my DAC using a headless Mac Mini, I had to make sure that all of the songs in "Music" were checked. To so so, I pressed the "check box." When I did that, all of the songs in each album were resequenced in not their proper order.
    How do I restore the proper order of songs for each album?

    In list view, select the album column. To choose which columns appear, select an item on the left side of the window (a playlist, for example), choose View > View Options, and select the information you want to see. You can also Control-click a column heading to select columns to display.
    The column selected determines how tracks are displayed.  For example, clicking the "Name" column displays all tracks in alphabetical order; clicking the "Album" column displays the tracks in album order; clicking the "Date Added" column displays the tracks in the order that they were imported into your library.  Columns also have a disclosure arrow at the right of the column (when selected) that you can click to reverse the order.

  • Sort order for book collections

    I have several book series that I've placed in individual collections for each series. I manually sort them in iBooks so that they are in proper reading order. When I sync my iPod Touch, some of the collections appear in the proper order on the iPod, while others appear in alphabetical order by title.
    Is there some trick to having collections appear on the iPod in the same order I put them in iBooks?
    Thanks for any help.

    Never mind, I answered my own question.
    In list view, the books display alphabetically by title. In icon view, they display in the order I placed them into.
    Seems odd to me that it would work like that.

  • Can keep everything but podcasts in proper order

    I've reviewed recent postings, but they don't seem to resolve my problem unless I'm missing something.
    I have podcasts and then audiobooks at the top of my Shuffle, then the music. All options to shuffle tracks are turned off. I drag the podcasts onto the shuffle in content setting, with the left hand column clicked always. I then make sure the podcasts are in the right order by dragging them. I resync before I disconnect. While (using 7.3) the books stay in proper order when I listen on Shuffle, the podcasts always seem to go in reverse order (I order them 1,2,3, they play 3,2,1). When I reconnect Shuffle they show in reverse (3,2,1). I have turned Shuffle on and off, restored to original settings, updated to latest iTunes; nothing seems to help with this. I am using podcasts to try to learn a language, so it would really help to have them in order. Please, if anyone can help with this I will be really grateful!

    Hey everyone,
    Same problem here...
    I'm using iTunes version 7.3.1 with 2nd Gen Shuffle.
    iTunes is showing correct desired sort order (with some work), but Shuffle refused to play back podcasts in anything but release date order (apparently), even after being properly syncing. Music albums seem to be unaffected.
    I think I've stumbled onto a fix (for a Win XP machine anyway) while playing around with something else. Now my Shuffle is playing both songs and podcasts in the proper sort order. In a nutshell, I stopped then restarted the iPod "service" in the Windows operating system.
    Follow these steps exactly:
    1. Quit iTunes.
    2. Right click on "My Computer" (or "Computer") found on the Windows desktop or under the Windows Start menu in the lower left corner of the screen.
    3. Click on "Manage"
    4. If Windows requires your permission to continue, click Continue.
    5. Click the plus symbol to the left of Services and Applications.
    6. Click on "Services" listed under Services and Applications.
    7. Double click "iPod Service" in the right hand panel.
    8. Click the "Stop" button under the General tab and leave the iPod Service Properties window open.
    9. Connect your iPod and wait until it is visible in "My Computer" (or "Computer"). Note: On my XP machine, I had a new file explorer window pop up showing the iPod assigned to a folder, which later closed on it's own).
    10. Click the "Start" button in the iPod Service Properties window.
    11. Open (start) iTunes.
    12. Once iTunes is done reading the Shuffle, sort the Shuffle's playlist in the order you desire.
    13. Right click on the Shuffle's name which is on the left side of the iTunes screen.
    14. Click "sync"
    That's it!
    Good luck!

  • HT6065 When do we get a proper fix for the Mail App?

    When do we get a proper fix for the Mail app on my iMac? The last one made things worse. Or ta least, how can I roll back the OS to Mountain Lion?

    Thanks for the reply Varjak,
    Mail has stopped refreshing as it should. When I click the get new mail envelope, there used to be a sound after around five seconds if there were no new notifications. When I try that now the program just hangs. When I look at 'Force Quit', which incidentally I have to open another app or Finder window in order to access because Mail freezes totally, including the Apple menu, it says that Mail isn't responding. The Mac won't shut down sometimes because Mail won't quit. If I manage to open a mail and then go to another inbox, the whole thing is liable to hang. Using Apple help just before Christmas I cleared out the old cache that M.Lion left behind and now there isn't a cache for Mail.
    We are on Tiscali Broadband through a multi-port router and usually getting around 11Mb download speeds. My mail addresses are either tiscali.co.uk or gmail. It will not successfully send group mails either, despite the upgrade before Christmas. I never had a problem with M.L. and Mail. From looking at the Forums it seems I am not alone here. I also have a windows pc and an iPhone and they both access my mail addresses without any problem.
    Cheers,
    Cybermouse

Maybe you are looking for