Provision entries to be excluded from budge contorl
Hi,
We are on ECC6, EHp4, and already live 4 years back with SAP. Now, we want to exclude the provison entries from budget control. I understand,I can do the same by creating the new docment type. But in derivation rule the document type I see are the FM document type which are created for budget uplaod, am I correct?
How do I do this? Can anyone advise please.
Reards
Shaileh
Hi,
There is no link between budgetary FM document type and FI document type. If you want, indeed, to exclude certain FI document type from budget control, create a derivation rule in FMDERIVE, deriving dummy/statistical commitment item for the relevant type.
Regards,
Eli
Similar Messages
-
Recover EKRS entries_MRER-excluded from ERS
Hi,
Need your advice on this.
We use MRER for ERS postings (not MRRL). As you all know there is a option of excluding a particular entry from ERS run by selecting the "exclude from ERS" in both the transactions. It removes the entries from the EKRS table. Lately, we have noticed some entries being wrongly "excluded from ERS".
Is there any option to include such entries in ERS again i.e. pulling back the EKRS entries?
Note 862379 does not help as it recovers the entries only for the reversed invoices. In this case no invoice was posted at all.
Appreciate your kind help.
Thanks.hb,
I'm not sure I understand what the problem is. Are you saying that
- a GR was done
- entries placed on EKRS table
- entries disappear from EKRS without executing MBER or MRRL?
Are you sure the entries are on the EKRS table at all?
Have you tried to reverse the GR and then do the GR again just to see what happens? Are you sure the line item is set up for ERS?
Good Luck
Sandra -
Customs Duty to be Excluded from Budget
Dear All,
Scenario:
In case of Import procurement, the Additional Customs Duty(ACD) is available for Setoff. For which client wants to exclude the amount of ACD to be excluded from Budget Consumption.
Can Any one give the suggestion, how to do the above requirement.
Thanks.
Raja.Hi Alex,
Thanx for the response.
I believe, in case of Imports, there will be Planned Cost (Raw Material Cost) apart from this there will be local customs duty which needs to be paid, for receiving the goods, which are captured as Delivery Costs with different vendor at the time of MIRO.
The exact problem in this case is, the initial commitment will be booked at the time of PO, and actual accounting entry will be post by system at the time of MIRO
This is the problem, because during PO, total amount will be created as budget commitment and actual invoice will be booked after some months at this time, even if the system reverse the extra commitment say after 3 months, it wont make much sense as for the whole 3 months, my budget amount is reserved as commitment against PO, which will be a substantial amount.
So, Please share some ideas, how to come out of this situation, as the rollout of FM is held up due to this point
Thanks -
SAP HR Org. Structure excluded from integration to SRM
We have not set up the automatic integration of HR org changes into SRM organization (report RBDMIDOC, message type: HRMD_ABA).
In SAP HR some new org units with its positions and employees will be assigned.
We would like to exclude this new part of HR Organization Structure from
integration to SRM. In the transaction BD64 we can filtrer object type,
subtype, infotype and relationship but this is not sufficient for us.
¿How could we exclude from copying to SRM a whole part of the organizatonal tree, for example excluding a root org. unit (one ID) and all its dependets org. units (evaluation path)?
Thank you in advance.
Best regards.Hi Malgorzata Kaminska,
We had similar kind of requirement which we could acheive with
01) Write a custom program which calls the standard SAP T-code PFAL or (RHALEINI)
02) In the Exit R/3 outbound IDOCs, filter the PERNRs to exclude the list you do not want to. If the list is static, you can maintain in a custom table one time and in the outbound idoc exit, check an entry exists in the table and exclude the PERNRs. If the PERNRs are dynamic, then when the PERNR gets created, write another exit to populate in this custom table for PERNRs exclusion.
03) The custom program of point 01) will pick all the necessary PERNRs for replication and submit in the PFAL as select single.
04) The variant in the PFAL can have an evaluation path as P-S-O and executed under update mode.
Hope this helps!!!
DV -
Button 'Exclude from ERS' MRRL don't work
Hello,
When work this button?, i've in test mode and in real mode but any entry is deleted of list...
I have searched SDN solution, OSS, but I have not found an answer
Regards,
SilviaHello,
If, on your system, you can see a column with ERS postable, this signifies that they are postable and cannot be excluded from ERS-
"In transaction MRRL, in test mode, only the items which cannot be
posted, can be selected for exclude from ERS. The items, for which the
invoice can be posted, cannot be selected for excluding from ERS."
Best Regards,
Plauto -
Hi all,
can any one suggest how to do provisional entries for vendors in every month in SAP standard best practices way.
my client is booking vendor invoices through MM module. and they are using account assignment category F in the PO, to charge off the expenditure of PO value, when the GRN is made.
i mean to say that is the material, which is purchasing through the PO is non stockable item, it has to be written off to the expenditure GL account, when the GRN is made
hence by every month end there are some GRNs were not made even they received the goods for the same, because of PO is not prepared. so in that month before preparing the MIS they used to create some provision entries for which the actuval cost should go through GRN.
the entry is like
debit GL (Actuval GL)
credit GL (Monthly Provision GL)
on 1st of subsequent month they will reverse the above entry
in this case we are not able to get these provision entries in our vendor due date analysis report, hence those entries were not hitting to the vendors
so i want to know the standard way of doing provision entries in SAP, which should adequate the requirement of capturing the same in my vendor due date analysis......
thanks in advance, hence this a current issue.
SRINUHi all,
can any one give reply to my threat
since it was a serious issue
Srinu -
Which files to exclude from Antivirus scanning
We have several Oracle 9i installations. We have McAfee Antivirus client on our servers. Which oracle files/folders should I be excluding from on access antivirus scans?
Is there a document on this anywhere? Thanks in advance.You want to exclude directories that contain your datafiles, redo logs and control files.
-
hi all,
how to generate Month end provision entries.
pls give one example .
regards,
supriya thodimela.hi Supriya,
1. Process Depreciation Run
Accounting -> Financial accounting -> Fixed assets -> Periodic processing -> Depreciation run -> Execute - AFAB
2. Process Investment Grant
Accounting -> Financial accounting -> Fixed assets -> Periodic processing -> Investment grant - AR11
3. Process Revaluation
Accounting -> Financial accounting -> Fixed assets -> Periodic processing -> Revaluation for the balance sheet -> Post revaluation - AR29
4. AA Fiscal Year Change
Accounting -> Financial accounting -> Fixed assets -> Periodic processing -> Fiscal year change - AJRW
5. AA Fiscal Year Close Account Reconciliation
Accounting -> Financial accounting -> Fixed assets -> Periodic processing -> Year-end closing -> Account reconciliation - ABST2
6. AA Fiscal Year Close
Accounting -> Financial accounting -> Fixed assets -> Periodic processing -> Year-end closing -> Execute - AJAB
7. Produce Asset History Sheet
Accounting -> Financial accounting -> Fixed assets -> Info system -> Reports on Asset Accounting -> Balance Sheet Explanations -> International -> Asset History Sheet
or
Accounting -> Financial accounting -> Fixed assets -> Info system -> Reports on Asset Accounting -> Balance Sheet Explanations -> Country Specifics - various
8. Produce GR/IR Balance Report
Logistics -> Materials Management -> Inventory Management -> Environment -> Balances Display -> List of GR/IR Bals. - MB5S
9. Maintain GR/IR Clearing Account
Logistics -> Materials Management -> Invoice Verification -> Invoice Verification -> Further processing -> Maintain GR/IR acct - MR11
10. Material Revaluations Price Changes (manual)
Logistics -> Materials Management -> Valuation -> Valuation -> Price Determination -> Change price - MR21
11. Material Revaluations Debit/Credit Material
Logistics -> Materials Management -> Valuation -> Valuation -> Price Determination -> Debit/cred. material - MR22
12. Product Costing Material Price Change
Accounting -> Controlling -> Product Cost Controlling -> Product Cost Planning -> Material Costing -> Price Update - CK24
13. Material Ledger Closing
Logistics -> Materials Management -> Valuation -> Actual Costing/Material Ledger -> Periodic material valuation -> Post closing - CKMI
14. Materials Management Closing
Logistics -> Materials Management -> Material Master -> Other -> Close period - MMPV
15. Materials Management Closing Control Posting to Prior Period
Logistics -> Materials Management -> Material Master -> Other -> Allow posting to previous period - MMRV
16. Lowest Value Determination Market Prices
Logistics -> Materials Management -> Valuation -> Valuation -> Bal. sheet valuation -> Determ. lowest values -> Market prices - MRN0
17. Lowest Value Determination Range of Coverage
Logistics -> Materials Management -> Valuation -> Valuation -> Bal. sheet valuation -> Determ. lowest values -> Range of coverage - MRN1
18. Lowest Value Determination Movement Rate
Logistics -> Materials Management -> Valuation -> Valuation -> Bal. sheet valuation -> Determ. lowest values -> Movement rate - MRN2
19. Lowest Value Determination Loss-Free Valuation
Logistics -> Materials Management -> Valuation -> Valuation -> Bal. sheet valuation -> Determ. lowest values -> Loss-free valuation - MRN3
20. LIFO Valuation
Logistics -> Materials Management -> Valuation -> Valuation -> Bal. sheet valuation -> LIFO Valuation - Various
21. FIFO Valuation
Logistics -> Materials Management -> Valuation -> Valuation -> Bal. sheet valuation -> FIFO Valuation - Various
22. Physical Inventory Processing
Logistics -> Materials Management -> Physical Inventory - Various
23. Analyze GR/IR Clearing Accounts and Display Acquisition Tax
Accounting -> Financial accounting -> General ledger -> Periodic processing -> Closing -> Regroup -> GR/IR clearing - F.19
24. Define Adjustment Accounts for GR/IR Clearing
IMG -> Financial Accounting -> General Ledger Accounting -> Business Transactions -> Closing -> Regrouping -> Define Adjustment Accounts for GR/IR Clearing - OBYP
25. Print Balance Confirmation
Accounting -> Financial accounting -> A/P or A/R -> Periodic processing -> Closing -> Check/count -> Balance confirmation: Print
or
Accounting -> Financial accounting -> A/P or A/R -> Periodic processing -> Print correspondence -> Balance confirmation -> Print letters - F.17
26. Configure Balance Confirmation
Accounting -> Financial accounting -> A/P or A/R -> Periodic processing -> Closing -> Check/count ->
or
Accounting -> Financial accounting -> A/P or A/R -> Periodic processing -> Print correspondence -> Balance confirmation - F.1B, F.1A
27. Post Individual Value Adjustment
Accounting -> Financial accounting -> Accounts receivable -> Document entry -> Other -> Intern. trans. posting -> Without clearing - F-21
28. Define Account Determination for Flat-Rate Individual Value Adjustment
IMG -> Financial Accounting -> Accounts Receivable and Accounts Payable -> Business Transactions -> Closing -> Valuate -> Valuations -> Define Accounts OBB0
29. Configure Flat-Rate Individual Value Adjustment
IMG -> Financial Accounting -> Accounts Receivable and Accounts Payable -> Business Transactions -> Closing -> Valuate -> Valuations -> SPRO
30. Calculate Flat-Rate Individual Value Adjustment
Accounting -> Financial accounting -> Accounts receivable -> Periodic processing -> Closing -> Valuate -> Further valuations - F107
31. Writing-Off Doubtful Receivables
Accounting -> Financial accounting -> Accounts receivable -> Document entry -> Other -> Intern. trans. psting -> With clearing - F-30
32. Customizing Exchange Rates
IMG -> General Settings -> Currencies - Various
33. Maintaining Exchange Rates
Accounting -> Financial accounting -> General ledger -> Environment -> Current settings -> Enter exchange rates - OB08
34. Customizing Valuation Methods
IMG -> Financial Accounting -> General Ledger Accounting -> Business Transactions -> Closing -> Valuating -> Foreign Currency Valuation -> Define Valuation Methods - OB59
35. Foreign Currency Open Item Valuation
Accounting -> Financial accounting -> General ledger -> Periodic processing -> Closing>>Valuate -> Valuation of Open Items in Foreign Currency - F.05
36. Account Determination for Exchange Rate Differences
IMG -> Financial Accounting -> General Ledger Accounting -> Business Transactions -> Closing -> Valuating -> Foreign Currency Valuation -> Prepare automatic postings for foreign currency valuation - OBA1
37. Regroup Receivables and Payables
Accounting -> Financial accounting -> A/P or A/R -> Periodic processing -> Closing -> Regroup -> Receivables/ Payables - F101
38. Account Determination for Regrouping Receivables and Payables
IMG -> Financial Accounting -> Accounts Receivable and Accounts Payable -> Business Transactions -> Closing -> Regrouping - OBBV, OBBW, OBBX
39. Revalue Foreign Currency G/L Account Balances
Accounting -> Financial accounting -> General ledger -> Periodic processing -> Closing -> Valuate -> Foreign Currency Valuation of Inventory - F.06
40. Posting Accruals/Deferrals
Accounting -> Financial accounting -> General ledger -> Periodic processing -> Closing -> Valuate -> Enter Accrual/Deferral Doc. - FBS1
41. Posting Accrual/Deferral Reversal
Accounting -> Financial accounting -> General ledger -> Periodic processing -> Closing -> Valuate -> Reverse Accrual/Deferral Document - F.81
42. Generate Recurring Entry Posting
Accounting -> Financial accounting -> General ledger -> Periodic processing -> Recurring Entries -> Execute - F.14
REgards
assign the points
Ranjit -
Client wants freight charges to exclude from discount base for payment
Dear All,
Client wants freight charges to exclude from discount base for payment to vendor.
We have maintain the customization of "Discount base is net value" in Global Parameters for company code.
But while payment to vendors, the system is adding the freight amount in the discount base, which should not be.
Please advice, how we can solve this problem.
Is there any customization needed for that ?
Regards
BIJUDASHi,
The net caclulation is meant for calculation inclusive of exclusive of tax amount and not freight amount. If you want to acheive this fro freight, the only way i see it is thrugh separate invoices. Alternatively you will have to go through the ABAP route in terms of user exits. -
How can a qm-lot be excluded from availability check?
Hi experts,
in oppj I can exclude "stock in quality inspection" from availability check, but the qm lots are still handled as fixed receipts. This is ok, because the qm lots are not a stock. But the availability check shows available quantity and this is, what I don't want!
The question is: "How can qm-lots be excluded from availability check?"
Thanks for your help!
SAP AnwenderDear,
when you talk about QM lot,
QM lot is created during PO GR or Production order GR. Hence before the GR, MRP showes a recipt is expected and recipt element is either production order or PO.
Now even after GR, system removes the PO/Production order and increase the stock.
Hence in availability check if you decativate QM stock, this stock will not be considered, if to be con sidered, then active the QM stock.
Pl come back if required -
Unable to include VARI table in "Tables Excluded from REORG" No Edit options
I am trying to remove the table VARI from the automatic reorg in the dbacockpit.
Steps followed :
-> Configuration
-> Automatic Maintenance
-> Automatic REORG
-> Tables Excluded from REORG
Issue : Unable to include VARI table in "Tables Excluded from REORG" No Edit options .Hello Arun,
Automatic reorg of the tables/indexes is done on the basis of result provided by script REORGCHK which runs on regular basis to analyse the table with huge growth and more fragmented blocks.
Since the default filter for reorg is set to size' 1,000,000 KB', table which has bigger size than the default value, needs to be reorganized as per the standard configuration.
To exclude table VARI, modify the filter clause, and update the policy using procedure Automaint_set_policyfile(). You then can verify again using automaint_get_policyfile(). The procedures are documented in the IBM DB2 InfoCentre. If you need assistance, please let me know.
I suggest to take the exported policy, and just add table VARI in the filter clause. The section could read as follows.
========================================================================
<FilterClause>TABSCHEMA NOT LIKE 'SYS%' AND (TABSCHEMA, TABNAME) NOT IN
(SELECT TABSCHEMA, TABNAME FROM SYSCAT.EVENTTABLES) AND (TABNAME <>
'VARI')</FilterClause>
========================================================================
Then apply this policy, and check results.
Please provide feedback.
Best Regards,
Gunjan -
Sir,
I want to know how to passed provision entry in sap.
for example i want to pass provision entry for Audit fees.Hi,
If you have TDS then pass the following entry:
40 Audit Fees 1000
50 Vendor 900
50 TDS Pay.100
At the time of Payment in next year
40 Vendor 900
50 Bank 900
At the time of TDS Payment
40 TDS Pay.100
50 Bank 100
Thank you. -
What files can be excluded from user-managed backup in noarchivelog mode?
what files can be excluded from user-managed backup in noarchivelog mode?
control files,
sqlnet.ora file,
tnsnames.ora,
datafiles associated with read-only tablespaces,
datafiles associated with read/write tablespaces,
of these, what can be excluded and what have to be included?
Thanks.... and don't forget pfile or spfile... it can help too.
Re: What are generally backed up during the backup?
Nicolas. -
Manipulating "Exclude from XML Output" property at runtime
Hi !
Here's one for reports 10g
Is there a way/function to manipulate the "Exclude from XML Output" property for attributes at runtime (say, in the after param form trigger ?)
The srw.package contains functions to manipulate the "other 4" XML properties of an attribute, but not this one... ?
Any help greatly appreciated...
Cheers,
Jens RettigHi,
I posted a solution for this in the thread: Dynamically show/hide columns for DelimitedData output
Thanks.
Paul
(If the link doesn't work then I re-post the solution from that thread). -
Hallo together,
is it possible to transport entry points (for broadcasting) from one portal to another?
For our upgrade BW 7.01 to BW 7.4 we want to transport the KM Content (including the rooms).
Transporting the rooms and room structures is no problem, but the transported rooms are not visible in ENTRY POINTS -> My Room Folders.
Only rooms that are newly created in the 7.4 Portal are visible in that folder.
Is there are way to make the transported rooms also visible there?
Thanks and best regards!
ChristianHi Ramakrishna!
I know that WP-PI 6.00 will work fine with R/3 4.6C but my doubt is if I can use WP-PI 6.00 (which is
EP 6.00 plug-in) to connect the R/3 4.6c with an EP 7.00.
I didn´t find anything like WP-PI 7.00 in SAP Marketplace. I´ve already read the note you pointed out but it refers to EP 6.00. It also says you can use WP-PI 6.00 por EP 5.0 or Sap Workplace. But can I also use it with EP 7.00?
Thanks for your help.
Fernando
Maybe you are looking for
-
Problem In report output display when i run in the background
Hi, In a classical report i am printing around 17 fields the width of the report out put is around 800 characters. If i run the report in the fore ground it running perfectly. But the thing is when i give large selection is it GETTING ' TIMED OUT
-
Why won't my Mac connect to the Internet?
On occasion we have to reset our modem, but today my Mac won't connect while my iPad is working fine with the Internet.
-
Firewall-config cannot change firewall zones of NetworkManager conns
I have been playing around with firewalld and firewall-config recently to try to harden up my laptop. My regular user account is in group wheel, and I have polkit set up. So, any administrative tasks prompt me for my password. I can configure netwo
-
Installed ios update now just showing itunes connection, why?
after installing an ios update phone not working just showing itunes logo and connection. I have connected to itunes but it is not recognizing my phone
-
How to install plugin from an intranet webserver.
I am trying download and install java plugin from an intranet webserver. The code I used in OBJECT tag as below: "codebase="http://myserver:7001/mydomain/support/j2sdk-1_4_1_01-windows-i586.exe" but I got a warning from IE which says:Can't run the Ac