Unable to include VARI table in "Tables Excluded from REORG" No Edit options

I am trying to remove the table VARI from the automatic reorg in the dbacockpit.
Steps followed :
-> Configuration
-> Automatic Maintenance
-> Automatic REORG
-> Tables Excluded from REORG
Issue : Unable to include VARI table in "Tables Excluded from REORG" No Edit options .

Hello Arun,
Automatic reorg of the tables/indexes is done on the basis of result provided by script REORGCHK which runs on regular basis to analyse the table with huge growth and more fragmented blocks.
Since the default filter for reorg is set to size' 1,000,000 KB', table which has bigger size than the default value, needs to be reorganized as per the standard configuration.
To exclude table VARI, modify the filter clause, and update the policy using procedure Automaint_set_policyfile(). You then can verify again using automaint_get_policyfile(). The procedures are documented in the IBM DB2 InfoCentre. If you need assistance, please let me know.
I suggest to take the exported policy, and just add table VARI in the filter clause. The section could read as follows.
========================================================================
<FilterClause>TABSCHEMA NOT LIKE 'SYS%' AND (TABSCHEMA, TABNAME) NOT IN
(SELECT TABSCHEMA, TABNAME FROM SYSCAT.EVENTTABLES) AND (TABNAME <>
'VARI')</FilterClause>
========================================================================
Then apply this policy, and check results.
Please provide feedback.
Best Regards,
Gunjan

Similar Messages

How can we print the page numbers for TABLE OF CONTENTS form When its excluded from the form page count ?

Hi Experts,
We have TABLE OF CONTENTS followed by 100 forms with totally 215 pages.
We have checked in the Exclude from form page count option for TABLE OF CONTENTS form in Group level.
The forms followed by TABLE OF CONTENTS form all are using FORMSETPAGENUM rule in footer.
the very first form followed by TABLE OF CONTENTS form the page number starts at 1 of 215 and the last form ends at 215 of 215.
Now i want to print the Page number for TABLE OF CONTENTS form alone.
How can we do that ? Any thoughts ?
Regards,
RAMAN C

Hi Raman,
I guess, you have included 'Exclude Page Count' option in Table Of Content (TOC) form.
There is a limitation in studio. The page number functions (FORM PAGE NUM OF/ FORMSET PAGE NUM OF) will be ineffective when we select the 'Exclude Page Count' option in TOC form. Hence, you was not able to print the Form Page Count in TOC form.
The only way to print page count is to deselect 'Exclude Page Count' option. Then you can normally print the TOC Page Count in TOC form. However, thiS TOC page count will add to the Total formset Page Count. The Formset Page Count can be controlled through Postransdal using the script [FORMSET PAGE NUM = TotalPages() - 1]
Regards,
Mahesh

Unable to include a table in a Physical Model Diagram via the RON

Hi,
In Designer 10g I am unable to include a table in a Physical Model Diagram (Edit > Include) if I open the diagram via the RON, but it works if the diagram is opened via the Design Editor.
I found Doc ID268944.999 on Metalink which seems to detail the same problem, but no solution. So does this only work via the Design Editor now?
Thanks,
Antony

I tried to find the item on Metalink but could not find it.
I have never tried to move tables in the RON to an SMD.
Of course I do not know why you would want to do that. The DE does it so nicly.
What error message are you getting?
Tell me exactly what your doing and I will try it here.

Unable to delete a row in table control

Hi,
I'm unable to delete a row in table control.
I have defined a selection column for my table control but it is not getting value 'X' when i'm selecting a row for deletion.
Also, when I press enter, some of the columns in table control are getting initialized. I'm passing these values to the internal table along with other columns.
Please help.
Regards,
Manasee
Message was edited by: Manasee Chandorkar

hi,
kindly chk this.
PROCESS BEFORE OUTPUT.
MODULE status_9010.
LOOP WITH CONTROL tab_control.
MODULE move_data_to_table.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP WITH CONTROL tab_control.
MODULE move_data_from_table.
ENDLOOP.
*& Module move_data_to_table OUTPUT
This is to move the data from the internal table to the table control
MODULE move_data_to_table OUTPUT.
This is to move the data from the internal table to the table control
zmpets_mode-modecode,zmpets_range-rangeid,zmpets_servfacto-factor are column name of table control
READ TABLE int_factor INDEX tab_control-current_line.
IF sy-subrc = 0.
zmpets_mode-modecode = int_factor-modecode.
zmpets_range-rangeid = int_factor-rangeid.
zmpets_servfacto-factor = int_factor-factor.
ENDIF.
ENDMODULE. " move_data_to_table OUTPUT
*& Module move_data_from_table INPUT
Date is moved from the table control to the Internal Table
MODULE move_data_from_table INPUT.
To move the data from the table control to internal table 'INT_FACTOR'.
int_factor-modecode = zmpets_mode-modecode.
int_factor-rangeid = zmpets_range-rangeid.
int_factor-factor = zmpets_servfacto-factor.
int_factor-chk = line.
*here if the data is there, it will modify
MODIFY int_factor INDEX tab_control-current_line.
IF sy-subrc NE 0. "data not exixting in table control . ie new data, then append it
APPEND int_factor.
CLEAR int_factor.
ENDIF.
ENDMODULE. " move_data_from_table INPUT
*delete a line from table control
MODULE user_command_9010 INPUT.
CASE sy-ucomm.
When an entry is deleted, and the entry is removed from the table
control.
    WHEN 'DELETE'.
      PERFORM f_del_frm_tab_cntrl.
ENDCASE.
ENDMODULE.
FORM f_del_frm_tab_cntrl .
LOOP AT int_factor WHERE chk = 'X'.
    DELETE int_factor WHERE chk = 'X' .
    CONTINUE.
ENDLOOP.
CLEAR int_factor.
ENDFORM.
for any clarifiaction pls mail me.
pls reward points, if this helped u.
regards,
anversha.
[email protected]
Message was edited by: Anversha s

Unable to read attribute of type TABLE

Hello IDM Gurus,
I was having some trouble reading data in the source tab from a temporary table created in a FROM AD Pass; specifically I am unable to read from an attrribute of type TABLE, which is being used for the memberOf attribute when reading members of a group from AD. I don't get any errors in the FROM Pass, nor do I get any errors when trying to read all other data from the temporary table; I'm able to read all data except the memberOf attribute of type TABLE; I've tried different variations of SELECT statements as well as different possible values in the destination tab but it still hasn't resulted in valid memberOf values from the temporary table.
I thought this would be a lot simpler than it's turned out to be; I would appreciate any help I could get on this issue.
Thanks a lot in advance!
Best regards,
Sandeep

Hi Achim,
Thank you for your quick response! I was actually able to spend a bit of time on the table itself and after experimenting a bit I managed to work out a query to correlate the memberOf values with the appropriate keys from the two separate tables in the same pass.
Thanks again for your suggestions!
Best regards,
Sandeep

Customer Include in Data Dictionary Table

Hi
I have added a new field in Structure PAD614 and Table HRPAD614 through a customer include CI_PAD614. The table is adjusted and structure is activated. Is there anyway that the newly added field becomes the part of a standard screen as structure PAD614 is used for a standard screen. I have to display the newly added field on the screen.
Regards
W Imran

Hi Imran,
Is this issue resolved.
We are also facing a similar issue , and would like to incorporate the Custom field in the standard screen.
Please let us know.
Raj

URGENT can anyone let me know how to include sort buttons in table maintian

hi
can anyone let me know how to include sort buttons in table maintianence
as generally table maintianec done have sort buttons i need to include the sort buttons kindly let me know on that asap
or can we use module pool in between table maintianece screen
if yes how touse and how to cod for that
regards
Arora

You can change the coding of Table Maintenance.
>> Goto SM30, give table name and goto Display/Maintain mode and copy all the GUI status from standard program into your function group. Add sort button in the GUI Status of Maintain & Display mode.
>> Goto to tablemaintenance screen generated using SE51.
>> Select change mode.
>> After PROCESS BEFORE OUTPUT, create one module to assign your function group program name to " X_HEADER-GUI_PROG = "
>> In PROCESS AFTER INPUT, add another module at the end to perform the action.
-Alpesh.Saparia

KUP-04063: unable to open log file.. (while selecting from External table)

Hi
I am trying to craete an external table and then select the data from the table. However I am getting error while trying to select the data from external table.
SQL>CREATE OR REPLACE DIRECTORY my_dir as 'C:\arun';
Directory created.
SQL>GRANT ALL ON DIRECTORY my_dir TO PUBLIC;
Grant succeeded.
SQL>DROP TABLE proj_checklists_external;
Table dropped.
SQL>CREATE TABLE proj_checklists_external
2 ( checklist_submission_id NUMBER
3 ,Lead_reviewer_name VARCHAR2(30)
4 ,Lead_reviewer_corp_id VARCHAR2(10)
5 ,creation_date VARCHAR2(10)
6 ,submitted_dater VARCHAR2(10)
7 ,approved_date VARCHAR2(10)
8 ,status VARCHAR2(50)
9 )
10 ORGANIZATION EXTERNAL
11 (
12 TYPE ORACLE_LOADER
13 DEFAULT DIRECTORY my_dir
14 ACCESS PARAMETERS
15 (
16 RECORDS DELIMITED BY NEWLINE
17 FIELDS TERMINATED BY ','
18 )
19 LOCATION ('Book1.txt')
20 )
21 PARALLEL 5
22 REJECT LIMIT 200;
Table created.
SQL>SELECT * FROM proj_checklists_external;
SELECT * FROM proj_checklists_external
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04063: unable to open log file PROJ_CHECKLISTS_EXTERNAL_28484.log
OS error No such file or directory
ORA-06512: at "SYS.ORACLE_LOADER", line 14
ORA-06512: at line 1
I craeted an file PROJ_CHECKLISTS_EXTERNAL_28484.log also in C:\arun and then tried to select but still got same error.
Any idea how to overcome this error.
Regards
Arun

here you go:
SQL> CREATE OR REPLACE DIRECTORY GRATIS_LOAD as 'D:\AdvSourceData\Membership\';
Directory created
SQL> GRANT ALL ON DIRECTORY GRATIS_LOAD to ADVROLE;
Grant succeeded
SQL>
SQL> DROP TABLE MEMB_BATCH_LOAD_ID;
Table dropped
SQL> CREATE TABLE MEMB_BATCH_LOAD_ID (
2 ID_NUMBER VARCHAR2(10),
3 STATUS CHAR(1)
4 )
5 ORGANIZATION EXTERNAL
6 ( TYPE ORACLE_LOADER
7 DEFAULT DIRECTORY GRATIS_LOAD
8 ACCESS PARAMETERS
9 ( records delimited by NEWLINE
10 fields (
11 ID_NUMBER POSITION (1:10) CHAR,
12 STATUS POSITION (11:1) CHAR
13 )
14 )
15 LOCATION
16 ( 'GRATISID.TXT'
17 )
18 );
Table created
SQL> select * from memb_batch_load_id;
select * from memb_batch_load_id
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04063: unable to open log file MEMB_BATCH_LOAD_ID_1388_5552.log
OS error The system cannot find the file specified.
ORA-06512: at "SYS.ORACLE_LOADER", line 14
ORA-06512: at line 1
SQL>

What does mean You can include static and dynamic tables into a Smart Form?

Hi guys,
If you check the official documentation for Smart forms in the Internet you will read that the initial pharagraphs of the text tell you "Tables - You can include static and dynamic tables into a Smart Form. Dynamic tables enable you to display tables whose size is determined only at the moment of their output by the number of the table items to be displayed". The link is the following: http://help.sap.com/saphelp_nw04/helpdata/en/a5/de6838abce021ae10000009b38f842/frameset.htm
I was wondering if this means that I can use field symbols with dynamical number of columns to print a smart form. Because it would be great since the customer wanted a dynamical report depending on the week day it was (If Monday, there was only 12 columns, but if Friday, it will be 52 columns (1 column more for every day elapsed in the current week)). I had to create 5 different forms, but I think using field symbols I had spent less effort. Do you know if it is really possible? If not, then what does mean "You can include static and dynamic tables into a Smart Form"?
Thank you in advance

Hi ,
The concept of static and dynamic tables in smartforms, means you can use template- ( static table as no of rows and columns is fixed). Also you can use table- dynamic as the no of rows will depend on your line items.
Hope this will help you to close this thread.
Also, try to find this answer in posted forums. Creating a new forum everytime just increases the network traffic. So please try to avoid it.
Regards,
Vinit

Unable to retrieve data from a nested table in Oracle 8i from JSP

How do i retrieve data from a nested table in Oracle 8i from my JSP code?
When i try to execute the query , a general error is thrown.
Kindly advice as soon as possible.

How do i retrieve data from a nested table in Oracle 8i from my JSP code?
When i try to execute the query , a general error is thrown.
Kindly advice as soon as possible.

Unable to highlight text in ibook table (on Ipad ) created with ibook author

Text I enter onto table is not highlitable when viewed on iPad.
Suggestions?

The way i enter text onto table:
select table cell, double click, enter text, press tab.
It looks its a standard procedure
export as ibook
many thanks

UFT 12.01-Unable to Identify objects inside grid table

We are automating a Window based application using UFT 12.01.
The Product and UFT Tool are installed in Client Network-Desktop and we are accessing through VPN connectivity.
Technology stack of the application are
.Net Framework 4.0
IIS6.0 or greater
Sql Server 2008 R2
DevExpress V11.2 (UI & Reports)
Janus Controls (UI)
AutoMapper used within Interfaces
Ciloci.Flee used for expression builder
Autofac used of IOC cache
The grid table is identified as SwfObject and its dynamic table. Hence we can’t perform any table operations inside table like get row() , get celldata() etc.,.We need to capture edit box inside a row which is enabled on clicking the particular row.
How to Identify objects inside Grid table

Hello again,
Here you are the DDL of the offending table:
CREATE TABLE "DBADMEX"."T50SEC82"
"COD_EMPRESA" CHAR(4 BYTE) DEFAULT ' ' NOT NULL ENABLE,
"COD_EMPR_CONT" CHAR(4 BYTE) DEFAULT ' ' NOT NULL ENABLE,
"COD_SECT_CONT" CHAR(2 BYTE) DEFAULT ' ' NOT NULL ENABLE,
"NUM_CUEN_CONT" CHAR(18 BYTE) DEFAULT ' ' NOT NULL ENABLE,
"COD_PAIS" CHAR(4 BYTE) DEFAULT ' ' NOT NULL ENABLE,
"COD_SECTOR" CHAR(6 BYTE) DEFAULT ' ' NOT NULL ENABLE
PCTFREE 10 PCTUSED 40 INITRANS 50 MAXTRANS 255 NOCOMPRESS LOGGING STORAGE
INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT
TABLESPACE "TS_50" ;
CREATE UNIQUE INDEX "DBADMEX"."I5000082" ON "DBADMEX"."T50SEC82"
"COD_EMPRESA", "COD_EMPR_CONT", "COD_SECT_CONT", "NUM_CUEN_CONT"
PCTFREE 10 INITRANS 50 MAXTRANS 255 COMPUTE STATISTICS STORAGE
INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT
TABLESPACE "TS_50" ;
We are using the following versions:
Oracle database: 11.1.0.7.0
Oracle Client: 11.2.0.1.0
Windows (where the client runs): XP SP3 (version 5.1 Build 2600_spsp_sp3_gdr.080814-1236) in spanish.
SQL Developer: 2.1.1.64 (MAIN-64.45)
I think I haven't forgotten anything.
Thanks in advance for your help!

Unable to insert rows into the table

My insert statement below is not correct, when i try run, its encoutering error "table or view does not exist".
Basically what i am doing here is collecting the table name in FOR variable which stores the table name in this variable. This variable, i am using as table. I know this is not the proper way, please let me how can insert the complete table rows with the following code.
DROP TABLE TEMP;
CREATE TABLE TEMP AS SELECT * FROM Comp WHERE 1=2;
DECLARE
I INTEGER DEFAULT 1;
S VARCHAR2(50);
begin
for C in (select TABLE_NAME INTO S from USER_TABLES where TABLE_NAME like 'CABLE%' and TABLE_NAME NOT like '%OLD' and Num_ROWS > 0 order by TABLE_NAME) loop
INSERT INTO TEMP SELECT * FROM c.TABLE_NAME;
dbms_output.put_line(c.table_name);
end loop;
end;
The above insert statement is not correct. How can i write proper way.
Thanks.
Best Regards
Arshad

user13360241 wrote:
My insert statement below is not correct, when i try run, its encoutering error "table or view does not exist".
Basically what i am doing here is collecting the table name in FOR variable which stores the table name in this variable. This variable, i am using as table. I know this is not the proper way, please let me how can insert the complete table rows with the following code.
DROP TABLE TEMP;
CREATE TABLE TEMP AS SELECT * FROM Comp WHERE 1=2;
DECLARE
I INTEGER DEFAULT 1;
S VARCHAR2(50);
begin
for C in (select TABLE_NAME INTO S from USER_TABLES where TABLE_NAME like 'CABLE%' and TABLE_NAME NOT like '%OLD' and Num_ROWS > 0 order by TABLE_NAME) loop
INSERT INTO TEMP SELECT * FROM c.TABLE_NAME;
dbms_output.put_line(c.table_name);
end loop;
end;
The above insert statement is not correct. How can i write proper way.
Thanks.
Best Regards
ArshadSTMT := 'INSERT INTO TEMP SELECT * FROM ';
STMT := STMT || S;
EXECUTE IMMEDIATE STMT;

Is there any STD prog which update Table TVARV-Table of VAR in SEL Cre

Hi ,
Can any one tell me which STD program will be used to update the Table TVARV (Table of Variable in selection cretria ). Or this table should be updated manually ? .Please kindly let me know .
Thanks & Regards,
Veera

Hi Veera,
TVARV table has allowed maintanace status and Maintanace view is available for the same.
So go to transaction SM30 and maintance the Table as you required.
Thanks
Nimesh S. Patel

TS2570 Still cant access my computer, followed instructions to perform a safe boot and last line of script it shows: BootCacheControl: Unable to open /Var/db/BootCache.playlist:2 No such file or directory. Any idea?

Brand new Mac Book Pro
Purchased in Mexico's Department store Liverpool on June 20th 2012
Purchased Memory upgade to 8Gb, on june 27th, at Apple Store Memorial City, Houston
Upgraded memory from 4Gb to 8Gb on June 28th.
Tried to write on my external HD (previously written on a windows based PC) with no success.
Upon reccomendation from a Mac assistant, copied all my external HD contents into my Mac Hard drive.
Then formatted my external HD and copied back all my information to it.
deleted all the information from my MacBook Pro HD.
Attempted to repeat the same operation with another external HD, but got a message saying there was not enough epace on the computer HD (even though I have a 750Gb Hard Drive.
Looked in the trash bin and there it was, all the information previously deleted..
Could not empty the trash bin, although I got a message asking me to safely delete all the information from the trash bin,
Could not get enough space released, after several attpempts the trash bin was finally emptied.
All happy getting acquainted with my new MacBook Pro. Two days later, got a gray screen and not able to start the computer.
Looking in to Mac support I found article http://support.apple.com/kb/TS2570 and followed instructions to perform a safe boot:
"Perform a Safe Boot
Simply performing the Safe Boot may resolve this issue.
Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
Start your Mac, then immediately hold the Shift key. This performs a Safe Boot. Advanced tip: If you want to
see the status of a Safe Boot as it progresses, you can hold Shift-Command-V during start up (instead of just Shift).
Note: A Safe Boot takes longer than a typical start up because it includes a disk check and other operations.
The following is the script that appears on the screen upon safe boot. and halt after the last line.
AppleACPICPU:Processor Id=6 LocalAplicId=255 Disabled
AppleACPICPU:Processor Id=7 LocalAplicId=255 Disabled
AppleACPICPU:Processor Id=8 LocalAplicId=255 Disabled
calling mpo_policy_init for TMSafetyNet
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
calling mpo_policy_init for Sandbox
Security policy loaded: Seatbelt sandbox policy (Sandbox)
calling mpo_policy_init for Quarantine
Security policy loaded: Quarantine Policy (Quarantine)
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California. All Rights Reserved.
MAC Framework Succesfully initializad
using 16384 buffer headers and 10240 cluster IO buffer headers
IOAPIC: Version 0x20 Vextors 64:87
ACPI: System State [SO S3 S4 S5] (S3)
PFM64 (36cpu) 0xf10000000, 0xf0000000
Aplconsole relocated to 0xf1000000
PCI configuration changed (bridge=16 device=4 cardbus=0)
[ PCI configuration end, bridges 12 devices 16 ]
Firewire (OHCI) Lucent ID 5901 built-in now active, GUID 3c0754fffe9b2aa2; max speed s800.
Pthread support ABORTS when sync kernel primitives misused
com.apple.AppleFSCompressionTypeZlib kmod start
com.apple.AppleFSCompressionTypeDataless kmod start
com.apple.AppleFSCompressionTypeZlib load succeeded
com.apple.AppleFSCompressionTypeDateless load succeeded
AppleIntelCPUPowerManagementClient: ready
BTCOEXIST off
wl0: Broadcom BCM4331 802.11 Wireless controller
5.100.98.75
AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitializad
rooting via boot-uuid from /chosen: 6E918706-FC0D-37460-A3A0-6268A51DF93B
Waiting on <dict ID="0"><key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleAPIPCI/SATA@1F,2/AppleIntelPchSe riesAHCI/PRT0@0/AOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlock
storageevice /IoBlockStorageDriver/TOSHIBA MK7559GSXF Media/IOGUIDPartit
BSD root: disk0s2, major 14, minor 2
Kernel is LP64
com.apple.launchd 1   com.apple.launchd 1   *** launchd[1] has started up. ***
com.apple.launchd 1   com.apple.launchd 1   *** Verbose boot, will log to /dev/console. ***
Running fsck on the boot volume...
** /dev/rdisk0s2 (NO WRITE)
** Root file system
   Executing FSCK_HFS (version diskdev_cmds-540.1~25).
BootCacheControl: UNable to open /Var/db/BootCache.playlist:2 No such file or directory
launchctl:Dubious permissions on file (skipping): /Library/LaunchDaemons
launchctl:Dubious permissions on file (skipping): /System/Library/LaunchDaemons
Any help or suggestions on what to do next would be welcomed.
I am in the middle of the Atlantick, stuck with a brand new, non working Apple MacBook Pro.
Best regards
Sergio Ramos

Reinstalling MacOS does NOT fix the problem for me. I'm still searching a solution !
Bernard

Unable to include VARI table in "Tables Excluded from REORG" No Edit options

Similar Messages

Maybe you are looking for