PS CC 14.2.1x64 Why always have to sign in ?
PS CC 14.2.1x64 Why always have to sign in ?
What if my network is down, how am I supposed to get any work done??!!
The problem is not that he can't sign in. The problem is that he has to keep doing it. What the real issue is in these cases should be fairly well established by now.
http://forums.adobe.com/thread/1439164?tstart=0
Try the solution in post # 2 first.
Similar Messages
-
HT203175 why do i always have to sign into my itunes account every time i open itunes on my computer
why do i always have to sign in to my itunes account everytime i open itunes.
its really annoying since nobody uses my computer and its password protected.... But like sometimes it does happen where i have to put it in, and other times it doesn't
-
Why do i always have to sign into apple support communities
cant it just keep me signed in all the time? i have the username password stored, but everytime i visit i still have to sign in by clicking.
I have a solution that is guaranteed to work - and I'm using it right now.
1Password is a password manager plus that automatically saves all of your sensitive logins and passwords. I use it for forums like this, banking, and other accounts - online and other. The way it works is like this: when you go to a site that requires a password, 1Password will iniitially ask for your Apple password; after this, your passwords can be entered by going to a relevant site, clicking the 1Password icon, and pressing Enter. It saves a ton of time.
If you've slept your machine, it will ask for your login again. But security with 1Password is very good, and it will work with Safari and Firefox.
If this is helpful, poat here with your remarks! -
I always have to sign in to use touch ID
everytime I want to purchase or download a new app on the app store, I have to sign in to my itunes account to enable the touch ID. Does anyone know why this always happen?
That is pretty strange behavior.
I would think that maybe the settings are askew. Try going into Settings > General > Passcode and Touch ID and make sure that "iTunes Store" is turned on. Then, restart your phone, use Touch ID to get into your phone, and then try it out.
If that doesn't work, try toggling touch ID in Settings > Passcode and Touch ID.
The settings in your iPhone should reflect what's in this article: http://support.apple.com/kb/HT5883 -
Why I have lock sign at upper bar?
Why I have sign of lock at my phones upper bar?
Mqalbani1 wrote:
Why I have sign of lock at my phones upper bar?
It is the rotation of the screen lock.
http://ipod.about.com/od/iphonetroubleshooting/qt/iphone-screen-rotation-lock.htm
Good Luck -
Why my Firefox always lack and why I have to wait for minutes to open a page?
Dear customer support officer,
Why my Firefox always lack after I have update with Window 7 Service Pack 1? ... and why I have to wait for minutes to open a page?
I discovered from the "Task Manager", every time when Firefox is lack, it took up 100% of my "CPU Useage".
Below, kindly find my version spec for your investigation convenience. Many thanks in advance for your prompt support : )
Sincerely yours,
Charmayne
Application Basics
Name
Firefox
Version
5.0
User Agent
Mozilla/5.0 (Windows NT 6.1; WOW64; rv:5.0) Gecko/20100101 Firefox/5.0
Profile Directory
Open Containing Folder
Enabled Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Better Facebook!
5.852
true
[email protected]
Java Console
6.0.20
true
{CAFEEFAC-0016-0000-0020-ABCDEFFEDCBA}
Java Console
6.0.22
true
{CAFEEFAC-0016-0000-0022-ABCDEFFEDCBA}
Java Console
6.0.23
true
{CAFEEFAC-0016-0000-0023-ABCDEFFEDCBA}
Java Console
6.0.24
true
{CAFEEFAC-0016-0000-0024-ABCDEFFEDCBA}
Java Console
6.0.26
true
{CAFEEFAC-0016-0000-0026-ABCDEFFEDCBA}
RealPlayer Browser Record Plugin
14.0.3
false
{ABDE892B-13A8-4d1b-88E6-365A6E755758}
Modified Preferences
Name
Value
accessibility.blockautorefresh
true
accessibility.typeaheadfind
true
accessibility.typeaheadfind.flashBar
0
browser.history_expire_days.mirror
180
browser.places.smartBookmarksVersion
2
browser.startup.homepage
http://www.google.com/webhp?hl=en
browser.startup.homepage_override.buildID
20110615151330
browser.startup.homepage_override.mstone
rv:5.0
browser.tabs.loadInBackground
false
dom.disable_open_during_load
false
extensions.lastAppVersion
5.0
keyword.URL
http://mystart.incredimail.com/?loc=ff_address_bar&a=ICetqQnqJ0&search=
network.cookie.prefsMigrated
true
places.database.lastMaintenance
1311818987
places.history.expiration.transient_current_max_pages
64401
places.last_vacuum
1298980389
print.print_printer
Microsoft XPS Document Writer
print.printer_Microsoft_XPS_Document_Writer.print_bgcolor
false
print.printer_Microsoft_XPS_Document_Writer.print_bgimages
false
print.printer_Microsoft_XPS_Document_Writer.print_command
print.printer_Microsoft_XPS_Document_Writer.print_downloadfonts
false
print.printer_Microsoft_XPS_Document_Writer.print_edge_bottom
0
print.printer_Microsoft_XPS_Document_Writer.print_edge_left
0
print.printer_Microsoft_XPS_Document_Writer.print_edge_right
0
print.printer_Microsoft_XPS_Document_Writer.print_edge_top
0
print.printer_Microsoft_XPS_Document_Writer.print_evenpages
true
print.printer_Microsoft_XPS_Document_Writer.print_footercenter
print.printer_Microsoft_XPS_Document_Writer.print_footerleft
&PT
print.printer_Microsoft_XPS_Document_Writer.print_footerright
&D
print.printer_Microsoft_XPS_Document_Writer.print_headercenter
print.printer_Microsoft_XPS_Document_Writer.print_headerleft
&T
print.printer_Microsoft_XPS_Document_Writer.print_headerright
&U
print.printer_Microsoft_XPS_Document_Writer.print_in_color
true
print.printer_Microsoft_XPS_Document_Writer.print_margin_bottom
0.5
print.printer_Microsoft_XPS_Document_Writer.print_margin_left
0.5
print.printer_Microsoft_XPS_Document_Writer.print_margin_right
0.5
print.printer_Microsoft_XPS_Document_Writer.print_margin_top
0.5
print.printer_Microsoft_XPS_Document_Writer.print_oddpages
true
print.printer_Microsoft_XPS_Document_Writer.print_orientation
0
print.printer_Microsoft_XPS_Document_Writer.print_pagedelay
500
print.printer_Microsoft_XPS_Document_Writer.print_paper_data
1
print.printer_Microsoft_XPS_Document_Writer.print_paper_height
11.00
print.printer_Microsoft_XPS_Document_Writer.print_paper_size_type
0
print.printer_Microsoft_XPS_Document_Writer.print_paper_size_unit
0
print.printer_Microsoft_XPS_Document_Writer.print_paper_width
8.50
print.printer_Microsoft_XPS_Document_Writer.print_reversed
false
print.printer_Microsoft_XPS_Document_Writer.print_scaling
1.00
print.printer_Microsoft_XPS_Document_Writer.print_shrink_to_fit
false
print.printer_Microsoft_XPS_Document_Writer.print_to_file
false
print.printer_Microsoft_XPS_Document_Writer.print_unwriteable_margin_bottom
0
print.printer_Microsoft_XPS_Document_Writer.print_unwriteable_margin_left
0
print.printer_Microsoft_XPS_Document_Writer.print_unwriteable_margin_right
0
print.printer_Microsoft_XPS_Document_Writer.print_unwriteable_margin_top
0
privacy.sanitize.migrateFx3Prefs
true
security.default_personal_cert
Select Automatically
security.warn_viewing_mixed
false
Graphics
Adapter Description
NVIDIA GeForce G102M
Vendor ID
10de
Device ID
0873
Adapter RAM
512
Adapter Drivers
nvd3dumx,nvwgf2umx,nvwgf2umx nvd3dum,nvwgf2um,nvwgf2um
Driver Version
8.15.11.8631
Driver Date
7-1-2009
Direct2D Enabled
Blocked on your graphics driver. Try updating your graphics driver to version 257.21 or newer.
DirectWrite Enabled
false (6.1.7601.17563, font cache n/a)
WebGL Renderer
(WebGL unavailable)
GPU Accelerated Windows
0/1upgrade your browser to Firefox 8 and check
* getfirefox.com -
Whenever I go to a site or click anything, I always have to move my mouse for the page to load, why is this happening? (When I go to a site full of images, I move my mouse a little bit at a time and it loads one image at a time)
Hi, Tom.
FYI: You've not stated which of your listed Macs is having the problem. However, the following may help in any case:
1. Did you install Front Row using the Front Row hack on a Mac that did not ship from the factory with Front Row installed? If so, See my "Uninstalling the Front Row hack" FAQ. This has been known to cause a variety of problems, including the menu bar (Clock, Spotlight) issues you noted.
2. If you did not install the Front Row Hack, an incompatible or corrupted Startup or Login Item may be partly to blame for the problems with the menu bar. My "Troubleshooting Startup and Login Items" FAQ can help you pin that down if such an item is causing the problem.
3. As a general check, run the procedure specified in my "Resolving Disk, Permission, and Cache Corruption" FAQ. Perform the steps therein in the order specified.
4. Re: Safari and Mail, if not sorted by any of the above, see also:• "Safari: Blank icon after installing Security Update 2006-002 v1.0."
• My my "Multiple applications quit unexpectedly or fail to launch" FAQ
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X -
Why do I always have to argue with BT?
Since an engineer visited me on Monday, my noise ration has been gradually creeping up, and my sync speed gradually falling.
Obviously they are both related.
So, I email the MODS and asked for them to lower my noise ratio to 3 up, 3 down, as it has been for years... infact it has been as low as 2, an I have had a perfectly stable connection.
The MODS reply?
The optimum noise margin is 6 dB, typically anything lower than that can cause stability and anything higher than that indicates a noise or instability problem (though a noise margin of 9 dB is still acceptable).
Whilst the sync speed may be somewhat lower than what it was in the past, it is normal for speeds to fluctuate and there's nothing there indicating your speed has decreased due to a fault as your noise margin is good and you have a low number of error seconds and no drop-outs over the last three + days.
I would advise though to keep an eye out for any deterioration in service (i.e. stability/drop-outs) as if the problem returns we can see about getting that checke out further.
I know all of that, Im not stupid!
I also know that a sync speed dropping from 18meg to 14meg is not usual fluctuations in speed, because I know my service, I've had it for 10 years!!!!
Im going to post stats from my previous supplier, then from BT.
Look at the difference.
Uptime:
4 days, 13:04:14
DSL Type:
G.992.5 annex A
Bandwidth (Up/Down) [kbps/kbps]:
1,412 / 19,131
Data Transferred (Sent/Received) [kB/kB]:
0.00 / 0.00
Output Power (Up/Down) [dBm]:
12.0 / 18.5
Line Attenuation (Up/Down) [dB]:
14.5 / 27.5
SN Margin (Up/Down) [dB]:
4.0 / 3.0
Vendor ID (Local/Remote):
TMMB / BDCM
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
Error Seconds (Local/Remote):
117 / 0
FEC Errors (Up/Down):
942 / 0
CRC Errors (Up/Down):
942 / 21,009
HEC Errors (Up/Down):
6,414 / 11,590
AND MY PRESENT STATS:
yes I know its only a 45min connection, its not an issue before you all start harping on about it.
Line state:
Connected
Connection time:
0 days, 00:46:04
Downstream:
14.84 Mbps
Upstream:
1.215 Mbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Fast
Noise margin (Down/Up):
6.0 dB / 5.6 dB
Line attenuation (Down/Up):
25.1 dB / 13.0 dB
Output power (Down/Up):
20.5 dBm / 12.1 dBm
FEC Events (Down/Up):
0 / 0
CRC Events (Down/Up):
510 / 32
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
289 / 7
Error Seconds (Local/Remote):
380 / 0
------Marc------TAMiiLBOY wrote:
Why do I always have to enter password-WI-FI?
It's possible the Wi-Fi is configured to work this way. The Wi-Fi in my office requires users to log in every time they connect.
Do other devices on the Wi-Fi network have the same issue? If so, it's a setting in the Wi-Fi router. -
When I try to upgrade and install to iOS 5.1, error message prompt "operation stop running". I have tried several time but failed. Also, would like to know why always need to have wifi access in order to upgrade the version of iPad iOS, what is the purpose of 3G then? This is really nonsense using wifi + 3G iPad. need help ! Thanks.
The file is too large to download via 3G. There is a 20MB limit with 3G. The purpose of having 3G is that you have internet access everywhere and do not need to be near a WiFi hotspot or network.
Not every single thing that you do every single minute of the day on the iPad involves downloading files larger than 20MB. You can surf the internet all day long sitting out in a park somewhere with 3G - but not with a WiFi only iPad - unless you use a hotspot with it.
Try turning off your firewall and anti virus software while you try to download the iOS update. -
Why do I always have "Insufficent Content for Edit" error message ?
Hi all FCE experts,
May I ask why do I always have "Insufficent Content for Edit" error message when I tried to overwrite or replace a clip ?
Ok,this is what happen:
I have a clip A (4 secs) followed by clip B (4 secs). Then in between I add a video transition.
After a while, I reckon I want to change clip B with another clip (say clip C). So, I went to brower & search for clip C which is 2 mins long clip. To make sure there are enough handles, I went to the centre mark an In point then 4 sec later mark an Out point. So I drag this clips C of 4 secs from the Viewer (I marked the In & Out point in the viewer) to the Overlay canvas & do an Overwrite but it says "Insufficent Content for Edit".
I then tried Replace also got the "Insufficent Content for Edit" error message.
I then tried to delete the video transition and repeat the above for overwrite and replace, both times I got the same error.
Any ideas ?
ThanksTom Wolsky wrote:
From your description there is no way either of these things should happen. Without seeing it I would guess there is something else going in your timeline or your clip which you're not telling us. *Perhaps there are I/O pints marked in the timeline*. Or the destination tracks are not set correctly. or something else.
Thanks Tom, you are correct.
I have In Point & Out Point marked on the Timeline. I used it when I did FILE > EXPORT and left it there. But once I cleared it, I am able to replace it with another clip.
But I am still puzzled as to why I cannot do any overwrite or replace when there is I/O points marked on the Timeline ? Especially when the section of clips I wanted to overwrite or replaced are located outside of the I/O points ?
Thanks -
hi after updating to Mountain Lion, it becomes difficult to quit Mail, always have to Force Quit. And while Mail is on standby, the fan keeps on running full power, the laptop is hot. Why is this happening?
If your computer was hot it wasn't asleep - it either didn't go to sleep or it work up after you put it to sleep. I've seen both things happen. First, read this article and follow the instructions.
1) For the next few days/weeks pay attention to the blinking light on the front of your computer when you close the lid. Don't put the computer into your backpack/case until it begins to blink. Wait a minute or so after it starts to blink to make sure it doesn't stop blinking - the signal it woke back up.
2) having followed the above instructions, if you take the computer out and it is hot again or if you take it out and discover it has powered down (you'll know this because when it starts up the battery will be drained and you'll see a progress bar over a ghostly display that will eventually become normal) immediately start the Console program and perform a search on 'sleep' and then 'wake'. This should bring up all the recent log files about sleep state changes (going to sleep and waking up). You should see one for when you put the computer to sleep and put it away and the next one should be just after you got it out. You'll find at least one though that shouldn't be there. That will tell you when the computer work up (when it shouldn't have) and might give a clue as to why.
One of the whys could be a magnet that is making the computer think the lid has been opened. -
Why I have to mute the Audio Voice recording track ( the first voice track ) always in order to sudue its recorded sound while I want to listen to other
tracks ( either audio or midi tracks ) in solo ?The other audio tracks with voice recording do not have to be muted in order not to interfere with other
tracks turned on solo. Can someone kindly explain this phenomenon and any way to fix this ?
Thanks
DanThanks, ATR,
I wll try this--but I still am unclear on how to do what the Manual says is possible: select clips on another track that WILL be moved, if I so desire, so as to remain synched to the main Video track.
UPDATE:
In the case of inserting Freeze Frame, I just tried both Ctrl method and Alt method, and neither worked.
1. Put Video on Vid1 track
2. Put Music on Sound Track
3. Ran a few seconds of Vid
4. Stopped Vid, selected Freeze Frame
5. Held down Ctrl key while clicking "Insert in Movie" also tried with holding down Alt key.
Result: a 3 second still was inserted int the Vid1 track. A corresponding gap was created in the Sound Track.
6. Slid the final part of the Sound Track to the left along the timeline to re-connect it to the next segment created by the above process.
Result: the video following the final Freeze Frame was pushed to the right end of Video1 track.
7. Slid the Sound Track all the way to the left.
Result: the entire Video 1 Track contents were pushed to the right and divided in pieces.
I documented each step with screen shots which I can send if you want them and if I can figure out how to do it.
UPDATE #2
In the case of inserting a video clip to the Timeline, I just tried both Ctrl method and Alt method, and neither worked.
1. Locate video in Project Assets
2a. R click video in Project Assets (pull-down menu appears), hold down Ctrl, click Insert to Timeline.
Result: Vid clip is inserted on Video 1 track, Sound Track is separated with a corresponding gap.
2b. R click video in Project Assets (pull-down menu appears), push Alt
Result: pull-down menu disappears as soon as Alt is pushed down.
I can stil drag the Vid clip but it's one more manual step...I love shortcuts!! -
Birthday are not saving in some of my contacts? What am I doing wrong. I always have put in birthday before with no problems. Some contacts it works and others do not? help me.
Arnis and Jeff,
Thank you both very much for your assistance. I was able to figure out why the Adobe Application Manager kept failing on installing the patches. Idiot me didn't unzip them first. Once I unzipped the patch files, the installer worked fine. Both patches are now successfully installed; my FM version is now 12.0.2..
To answer some of your questions:
Yes, I have administrator privileges on my PC.
Yes, I had all of the files in the book opened when I generated and/or updated the LOR file. So that was not the issue.
With the patches installed, I opened a book and all of its files. I updated the LOR and all works fine – it gives me all of the Imported Graphic references. So there must have been an issue with that release of FM12 (12.0.0.329), which was fixed with the patches.
Again, thank you both for your help!
Best regards,
Beverly -
Why i have to specify the parameters (property and name) in both tags?
Recently i learned how to populate a html:select with data from a DB table with a int value and a String value (value and label of an option). For that i create a business object that represent one pair value&label (i called categoryBO) and another business object that contains a list of the business objects categoryBO. So in my JSP i have the next code:
<html:select name="lista" property="listaPropiedades">
<html:optionsCollection name="lista" property="listaPropiedades" value="varValor" label="varLabel" />
</html:select> Well i understand the next: name is the name of the business object that contains the list with the objects that represents the options in the select tag; property is the name of the list object, in the business object i need to have the getters and setters for that list; then value is the name of the variable that contains the data that will be the value of each option and label is the name of the variable that contains the data that will be the value of each label.
But i have the next questions:
1. Why i have to establish the parameters property and name for bot html:select and html:optionsCollection? Why not only in html:select or only html:optionsCollection?
2. In the ActionForm for my JSP i don�t know what data type have to use to declare the variable that's linked with the option or with the select. I'm using Object for now.
3. Why the only way to populate the html:optionsCollection in the Action is passing the object in the request object as an atribute in the next way:
request.setAttribute("lista", objectThatContainsList);instead
((ActionForm)form).setListaPropiedades(objectThatContainsList);why's that? I have the same question when i'm populatina a normal html table using a logic:iterate tag or using a display:table tag from displaytag library.Ok, you have one big misconception here - you're using the same name/property for both the select component and its contents.
The html:select should refer you to ONE selected value (in this case an int). It should tie to a field on your action form.
The html:optionsCollection should refer to a list of beans used to populate this select component.
<html:select property="selectedItem">
<html:optionsCollection name="myList" property="listOfProperties" value="varValor" label="varLabel" />
</html:select>
1. Why i have to establish the parameters property and name for bot html:select and html:optionsCollection? Why not only in html:select or only html:optionsCollection?Because they actually refer to two different things, and should be two different values.
html:options gets the list of possible values
html:select stores the "selected" option. (consider what you would have if you just used a standard html:input here, and typed the id directly in - THATS the property to bind to)
2. In the ActionForm for my JSP i don�t know what data type have to use to declare the variable that's linked with the option or with the select. I'm using Object for now.You do now - because it is declared/mapped seperately
3. Why the only way to populate the html:optionsCollection in the Action is passing the object in the request object as an atribute in the next way:Its not.
The way you mentioned is also valid. If both the "selectedItem" and "listOfItems" are properties on your action form, you can leave out the "name" attribute, and they will be found there.
However if you are dealing with request scoped beans, you will have to populate the list on each access of the page - you will need a "load" action to poupulate the bean with the items for the dropdown, and make sure that it is always populated when you return to it (eg on an error condition).
That is why setting it as an attribute is sometimes preferable.
Cheers,
evnafets -
Does turning down volume in app always have to turn down ringer?
I have missed several calls because I turn down apps and it make the ringer equally as quiet. I have the same problem on my iPad. Any fixes?
When installing Vista or Windows 7, I always advice people to remove their OS X drive so that Windows doesn't touch, tag, or know about OS X (also makes the install easier).
Not sure why, but have you booted from another hard drive and run Disk WARRIOR - or at least Apple DU and tried doing disk repair? not sure it would help. Then zap PRAM and see if that changes this at all.
Maybe you are looking for
-
I bought a tv show from the itunes store, but it will not play the ending. How do I fix that?!
It must have not downloaded all the way... what do I do>!
-
Installer Builder - Install application installer error, NI Variable Engine 2.6.0
Dear All, Good Day! Im Shahril. My PC have 2 version of LV, 2012 and 2013. The application required NI Variable Engine to be installed. When i build the installer, nothing got wrong. AKA completed. But when tested it by install the application instal
-
Morning All Hopefully a quick one for you. Is there a way of calling a window before the MAIN window. It seems this is always called first and then the subsequent windows (which can be called explicitly via the CALL FUNCTION 'WRITE_FORM'.) Cheers Ia
-
Trackpad stopped clicking - MacBook Pro 2010
Hi everyone, I have a problem with my Macbook Pro... I was working on some designs last night when all of a sudden the trackpad stopped clicking/responding. Even the movement is random and unresponsive. I was wondering if anyone had experienced the
-
Regarding Generate New Database Job
Dear All, I have a query regarding Generate New Database job while extracting Local DB to developers. I got a request from multiple developers to extract Local DB for them. Do I have to run the Generate Database Job multiple times or is it enought if