PSE 8 crash in Windows 8 Pro

Hi people, I use PSE to create textures and other things to work with 3D and after install Win8Pro PSE always crash to desktop. Theres no way to work with it for a long time (more then 10 ou 15 minutes).
So I decided to download the trial for the 11 version, but it crash the same way...
Its a 64bit system using a 32 bit PSE. Its a fresh install since the upgrade from win7 didnt work very well for a lot of my other apps.
Any idea??

May be the preference file got corrupted.
Please try couple of probable solutions as mentioned below:
Solution 1:
1. Close Elements.
2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.
3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
Solution 2: In case any network printer is attached try to launch without network or printer uninstall or make different printer as default.
Solution 3: Try launching with anti-virus off or removing PSE from conflicting list.
Solution 4:
On the drive on which you have installed PSE,on my machine it is on C:
Go to C:\Program Files\Adobe\Photoshop Elements 11\Locales\<locale>\Plug-Ins\Import-Exportand you will find twain plug-in. Remove that plug-in from that location and copy it somewhere else.
Now launch PSE and check if it works.

Similar Messages

Itunes crash on windows pro 8.1

i try with clean boot, uninstalling itunes, but still crashes after a few seconds after the panel shows

So in other words, I didn't waist my money. I am learning cyber security. I guess my question was, all the option that I was paying for is going to work on my Mac machine. In other words, I did not buy something that won't work with all it's features. It will if I chose to allow it by my use.

Photoshop 2014 keeps crashing under Windows 8.1 on a Surface Pro.

Team,
Photoshop 2014 keeps crashing under Windows 8.1 on a Surface Pro.
I have tired.
1. Updating Intel Graphics Card. (unsuccessful)
2. Logging in and out of creative cloud. (unsuccessful)
See log below.
Faulting application name: Photoshop.exe, version: 15.2.0.236, time stamp: 0x542531ba
Faulting module name: ntdll.dll, version: 6.3.9600.17278, time stamp: 0x53eebd22
Exception code: 0xc0000005
Fault offset: 0x0000000000024ac8
Faulting process ID: 0x1448
Faulting application start time: 0x01cfe6c7bd37e765
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Photoshop.exe
Faulting module path: C:\windows\SYSTEM32\ntdll.dll
Report ID: 072b7ff9-52bb-11e4-825f-600292e27add
Faulting package full name:
Faulting package-relative application ID:

Well it came installed on my brand new Windows 8 pro w530 I received 4 weeks ago and has never worked. When you try to open power manager it just crashes. If you uninstall it the Lenovo software just keep reinstalling it. If you uninstall the Lenovo PM driver but do not reboot you can then open Power Manager. The minute you reboot the Lenovo software reinstallls the driver.
Why would Lenovo install software on a brand new Windows 8 laptop that is broken and useless? Tech support is absolutely no help they transfer you to the software department which wants to charge you to fix a problem that Lenovo created!!! It is crazy!! I was hoping someone here could solve this problem or maybe someone at Lenovo would see this and get the problem resolved. Tech support has been useless. I reported the problem to them at least 5 times.

Adobe acrobat pro 9.2 crashes in windows xp sp3 when closing a pdf

Adobe acrobat pro 9.2 crashes in windows xp sp3 when I close a pdf. This means that if I have multiple files open, all of them close. I get an error message from windows that the problem is due to windows' Data Execution Prevention (DEP). I tried making Adobe an exception to windows' DEP and re-started the computer but this did not help the problem. Any ideas about how to fix this problem?

So.. If we want to control the "hardware graphics acceleration", should it be done inside the Adobe Acrobat Pro ?
If yes, which part of option should we changed ?
If not, can someone tell me which way to setting this one ?
Do anybody have other input ? This problem makes me crazy
Thank you so much in advanced.

PSE 8 keeps crashing in Windows 7, any suggestions ?

PSE 8 keeps crashing in Windows 7, any suggestions ?

Hi,
I would like to know whether organiser or editor crashes ?
If its organiser then there is something related to Catalog.
Try these steps :
1. Goto this location : C:\ProgramData\Adobe\Elements Organizer\Catalogs\ -- (program data is hidden folder by default , you will need to unhide it)
2. Under this location you will find all the catalogs that were created by you
3. Choose your default catalog.
4. In that select and delete all the folders except Breezedata and file with extension .pse8db
5. Relauch your organiser and then check if its stil crashing.
Thanks,
Baljeet

PSE 8.0 windows 7 slideshow created but output to wmv file repeatedly crashes (with 1 exception)

I have PSE 8.0 Windows 7 and successfully create slideshows but the output to wmv file repeatedly crashes (with 1 exception) & adobe crash reports submitted have gone unanswered. Can anyone suggest solution(s) please?

Please see if windows media player is present on your system.

Premiere Pro CS5 Crashing in Windows 7

Hello,
Recently I have been experiencing program crashes in Premiere Pro CS5. Everything works fine, until I try to import some media. It often imports fine, however when it comes to conforming, he whole program freezes and Windows Error Report comes up. This happens everytime. I thought that it could possibly be a problem with my computers hardware (as I had been running Premiere Pro on the bare minimum requirements). So I upgraded my Processor from a Dual Core 2.0Ghz to a Quad Core 2.5Ghz. I also doubled the RAM from 2GB to 4GB. Yet the same error still occurs. Has anybody else been experiencing the same problem, and are there any steps I can take to fix it?

Welcome to the forum.
What are the full specs. of your Source Files, and what is the Sequence Preset?
Also, please tell us about your system's I/O, i.e. the HDD's, and especially things like defragmented free space. The more details, the better.
Last, are you running Win7-64 with but 4GB of RAM? That is just about enough to run Win7-64, and leave little, if any, for PrPro.
Good luck,
Hunt

Windows 2000 (SP3) crashes on K7T Pro

Hi
I have a this configuration:
K7T Pro (BIOS 3.6)
Athlon 1200
256 Ram pc 133
Geforce 3 ti200 detonator 40.71
hdd 20gb maxtor
Windows 2000 with SP3
directx 8.1
4in1 drivers
the problem is windows hangs and the 4 back leds turn all green on any application and more specially on games like quake 3, i want to know if its caused by some drivers? or do i need to install a patch for windows 2000 that fixes some AMD issues or mobo problems?
help would be apreciated

Sure you can Install a lv application manually. just copy the exe-file,
support files in a folder. For the runtimeengine just copy the file
lvrte.dll in the folder of your application or in the windows system folder.
Hope that helps, Niko
BB Herman wrote:
> Why will a stand alone executalbe with an installer work on windows
> 2000 and crashes on windows xp professional?
>
> When I run the setup.exe file on a Windows 2000 system it installs
> properly, but the same file run on a XP Professional system I get an
> error stating Fatal Error: Installation ended prematurely because of
> an error.
>
> See
> HREF="http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=50650000000800000...
for more information on the specific installer I'm trying to
> use.
>
> In fact I get this error for any stand alone executable I try to
> install on any XP machines. I am using LV 7.1. Is there a way to
> manually install everything?
>
> Thanks

Fix for Quicktime Pro crashes on Windows XP 64bit

This is for anyone experiencing crashing with Quicktime Pro when exporting, crashing with HD quicktimes in Firefox and problems with Sorenson Squeeze related to Quicktime files.
You CAN NOT run quicktime in the default "Direct X" mode on Win64. To change this, go to "Edit>Preferences>Quicktime Preferences" and click on the "Advanced" tab. Set the "video" to "safe mode (GDI only)". This fixed any crashing I had with quicktime, quicktime in Firefox, quicktime pro exporting and even fixed my problems with Sorenson Squeeze. Apple should make a note of this to users downloading for Win64. This may actually be the same case for Vista but I'm not sure.

Do you have an nVidia GeForce 8x00 video card?
If so, this appears to be more of an issue w/ nVidia's XP drivers (32-bit OR 64-bit) and you should report it to nVidia too, as they have yet to acknowledge any issues even though MANY people have this problem.
Vista works fine, though, actually!

Photoshop CS4 crashes with Filemaker Pro 8.5 open

Normally, continuous crashes in a new Adobe application results in a fairly quick fix in the form of an update. I let the application report the error codes via the automated submission process. However, I have had this problem for months now without any apparent remedy. I use Filemaker Pro 8.5 on Windows XP SP3 for all my invoicing and production scheduling. Photoshop CS4 will crash twice trying to run with Filemaker Pro open, however on the third try, it will run, but then Filemaker Pro will be frozen and require Ctrl-Alt-Delete force close to access again. I cannot use Filemaker Pro 9 or 10 due to the 8.5 requirements of the VERY expensive invoicing system.
Hopefully Adobe techs lurk these forums and will report attempt to resolve this issue.
Also, ONLY the Adobe website will freeze in my IE 8.0.6001 browser. I had to use Firefox 3.0.11 to access the website and then the forum. I see other users below this entry are reporting the same issue without a solution. I tried and tried again and waited. Apparently there is an issue related to the Flash banner, whereas all else will load, but the browser will hang up on the animation load. It eventually works, but not without long delay and browser hang up.

I am sorry about the bounce. Due to excessive spam (300+ a day), I had to deploy a spam filter.
READ THIS INFORMATION! If you are reading this message, then you are a real person with genuine intent, not a spammer. EDIT NOTHING, simply click REPLY and then click SEND and your email will be automatically added to my white list. Future emails will pass through the filter without being blocked. Please leave the subject line CODE intact when replying.
The headers of the message sent from your address are show below:
From [email protected] Tue Jul 14 21:10:14 2009
Received: from mail.sgaur.hosted.jivesoftware.com (209.46.39.252)
by core2.hostingmadeeasy.com with esmtp (Exim 4.69)
(envelope-from <[email protected]>)
id 1MQt0g-00086j-5l
for [email protected]; Tue, 14 Jul 2009 21:10:14 -0400
Received: from sgaurwa44p (unknown 10.137.24.45)
     by mail.sgaur.hosted.jivesoftware.com (Postfix) with ESMTP id C1D122408764
     for <[email protected]>; Tue, 14 Jul 2009 19:10:10 -0600 (MDT)
Date: Tue, 14 Jul 2009 19:10:08 -0600
From: Chris Cox <[email protected]>
Reply-To: [email protected]
To: Steven Ray <[email protected]>
Message-ID: <1859400340.32551247620210799.JavaMail.jive@sgaurwa44p>
Subject: Photoshop CS4 crashes with Filemaker Pro 8.5
open
MIME-Version: 1.0
Content-Type: multipart/mixed;
     boundary="----=_Part_3341_1342816916.1247620208717"
Content-Disposition: inline

MPEG2 Crashes DVD Studio Pro 4

Everytime I select a mpeg 2 (.m2v) in my import assests window, DVD Studio Pro immediately crashes. Even when I select the movie file from my finder, the finder crashes. This isn't just one movie file that is making these programs crash. I have tried 8 different ones. The weird part is that the .m2v files that already exist in the project play perfectly and don't crash DVD Studio Pro. How can I correct this problem? Thank you.

I've just loaded DVD Studio Pro 4 and cannot get it to import assets (of any kind) without crashing. I'm guessing this is a similar problem. I've repaired permissions, loaded the Pro app update and updated to DVD SP4.02. . .but I don't know what "trash the DVD SP plist" means?
At this point I can't operate anything in the menu, for example I can select preferences from the menu but it does nothing. It will open a new project, but won't let me do anything with the project.
I have more than the required hardware and had no trouble with DVD Studio 3. I did load Tiger before loading DVD SP4 if that makes a difference. Any suggestions? (I also loaded FCP 5 at the same time and have had no trouble withthat program.)
-mary

Safari crash in MacBook Pro

Hi,
I own a early 2011 MacBook pro (came with Snow Leopard initially) and I have installed Lion OX once it came out.
However, after this upgrade, I noticed that Safari has begun to crash randomly.
I thought it should be fine after few updates, but it still did not work out well.
What can I really do about this?

Hi ...
See if you can try this before Safari crashes...
Launch Safari. From the menu bar click Safari > Preferences then select the Security tab.
Deselect: Enable plug ins
Quit then relaunch Safari to test. If it doesn't crash, then you have a plugin installed that was compatible with Snow Leopard but not Lion > Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
If it's not a third party plugin issue, back to Safari > Preferences. Select the Extensions tab. If you have any installed, turn that off, quit then relaunch Safari to test.
If you couldn't resolve the issue..
Safari Crash Log: If Safari has just crashed, press the Report button on the CrashReporter dialog box to view the crash information.
Copy/paste the entire contents of the Crash Reporter window into your reply. If the crash report dialog does not appear or the crash is hard to reproduce, crash logs can be retrieved from the ~/Library/Logs/CrashReporter> folder.

Photoshop Elements won't open. I have tried re-installing. I have windows pro 7

Photoshop Elements won't open. I have tried re-installing. I have windows pro 7

Try making a direct desktop icon for the Editor and see if you can launch the program directly from the desktop.
Right click anywhere on the desktop and select New à Shortcut
Browse to Computer OS C:
And find the PSE Editor application in Program Files or Program Files (x86) on Windows 7 - 64 bit.
C: à Program Files à Adobe à Photoshop Elements 9
Within the Photoshop elements 9 folder find PhotoshopElementsEditor.exe (with the blue icon)
Select that file and click Next.
Then click Finish.
You should now be able to launch by double clicking on the new desktop icon, bypassing the welcome screen.

MSI x99 Gaming 7 Crashing during Windows UEFI Boot

Hello everyone,
I'm dealing with a strange problem here and i cannot seem to find any solution. Yesterday i updated my m/b bios from H.8 to H.9 and everything worked fine but 30 minutes later during some regular windows and drivers updates i restarted the machine only to find it crashing during windows loading logo when booting. I initially thought to be something about the new bios update (or windows/drivers updates) so i switched to the back-up bios ,updated it to H.8 (which i was using before) and did a quick format but the problem still occurs.
I pinpointed the problem to be something in the bios (bios update resets settings to defaults both when i updated to H.9 for the main bios & H.8 for the backup bios) and the UEFI settings for windows 8.1 since it doesn't occur when i disable the "Windows 8/8.1 Feature". What exactly does this feature do? The only difference i saw was the loading logo , now i see MSI red/black picture with the small circle-dots loading instead of a Black screen with white MSI logo if i enable the feature.
My system is new (three months old) and i never had any crash or lock-up anywhere (nor it is overclocked). All settings in the bios are default except the "Boot Mode Select" is UEFI and the "MSI Fast boot" is enabled. Windows 8.1 64Bit are installed in UEFI mode.
-MSI X99 Gaming 7
-Intel I7 5820k + Corsair H110
-G.Skill Ripjaws DDR4 16GB
-Gigabyte 970 G1 Gaming SLI
-Samsung 850 Pro 256GB
-EVGA SuperNOVA 1000 G2

Ok ,seem to have some updates:
First of all i was wrong about the SATA ports i was using (my second GPU blocks the view of the ports).
- SSD was connected to SATA3 while the other two HDD's to SATA10 & 9
I first disabled Samsung RAPID mode (you never know). Then i changed the SSD from SATA3 to SATA1 port and didn't connected the other 2HDD's at all. Enabled the "Windwos 8/8.1 feature" & Secure Boot and quickly did 4-5 restarts from the bios and from Windows, even a cold boot. No crashes but i need to do more reboots to make sure it doesn't occur any more. Then i will connect the other two HDD's and check for crashes.
Update#1 . Ok my other two HDD's are connected to SATA ports 3 & 4. After 3-4 restarts & 2 cold boots everything seems fine , no crashes at all. I don't know if maybe after 10 restarts it will occur but i'm confident enough that it should already be present now. So it seems that either Samsung Rapid Mode is responsible or the other SATA ports.
Update#2 . So Samsung Rapid Mode seems to work fine, again no crashes at all. This is getting really weird. So that leaves me with the Sata ports ,now i don't know if i need to change again sata ports to recreate the problem or leave it as it is (working) but then again if it's indeed the SATA ports then maybe something is faulty. Either way i'll check it. :/
Update#3 . I think i came to a conclusion. SATA ports 7-10 seem to have the problem.
- I reconnected everything to the original ports i was using (SSD to SATA3 and 2xHDD's to SATA10 & 9) .The crash happens the second time i restart the PC.
- Moved SSD to SATA1 , crash happens again at the second boot.
- Moved the 2xHDD's to SATA 7&8 ,crash happens at first boot.
- Moved the 2xHDD's to SATA 3&4 . NO Crash occurs.
I have no idea what's going on, the manual states that SATA 7-10 support only IDE mode and AHCI (SATA 1-6 supports RAID 0,1,5,10). For the record i do not use RAID.
So what is the problem? I didn't have any issues at all with the previous configuration. Did any of the SATA port's became faulty when using the "Windows 8/8.1 feature" after the bios update? Should i ask for a replacement?
The last thing i could try is to unistall the Intel Rapid Storage. MSI's drivers site for this m/b has the 13.1.0.1058 version while Intel has 13.6.0.1002 but they do not work as it says platform is not supported. I have the MSI's version installed all this time.

Very disapointed in Lenovo's service on my T430 machine type 2342CTO with Windows Pro 7 64 bit

I have been a ThinkPad user since the first model 700. I have always liked them and when I have had to use other laptops I found them inferior. However one thing my team has been telling me in the past year or two is that they do not want to purchase anymore Lenovo ThinkPad's. They have told me that the service and support has been greatly degraded. I was hesitant to agree with them until my present experience. We purchase all of our ThinkPad's with a 4 year on-site warranty. We have people who are in the field and when their computer goes down we need to get it back up and running ASAP.
Three weeks ago my hard drive started to give me some problems and one day after shutting down the computer a message came up that it needed to run Checkdisk which it did. I was able to keep it going and I did have a backup. I contacted the 800 number to talk with a service person and they ordered up service for the replacement of the hard drive and also to replace the fan and sent me the system disks for the T430. Two days later the insight service person showed up with the parts. The disks showed up as well via UPS. The service person replaced the fan and the HDD. There were 4 DVD's for the system disks. He started the rebuild and asked if I could finish it and I said I could with no problem. He left. I continued the process. After the 3rd DVD it asked to put in the 4th and when I did a message said that this was the wrong DVD. I tried all the other 3 with the same response. I tried building it from scratch again and the same problem. I called support again and the guy I spoke with thought that I must have a bad DVD and he would send out another set. That set of 4 DVD’s arrived the next day which I was very thankful for. He told me that they could only guaranty 2 days. I thought OK we should be up and running shortly. The same problem occurred again. Bear in mind that both sets of these DVD's were all labeled for the ThinkPad T430 machine type 2342 which was my laptop and for Windows Pro 7, 64 bit. I called Lenovo and this time the tech I spoke with said that there was another set of Disks for my machine that should have been sent. Of course I was frustrated but there was not a lot I could do about that and I asked if they could make sure that they were overnighted to me so that I would be sure to get them on the next day which was Thursday. He told me that he could not do that, that they could only guaranty 2 day. I called the next morning to get the tracking number which they gave me and it was supposed to be delivered on Friday which I was very thankful for. That was Good Friday. However UPS had some severe weather at their hub in Kentucky and everything was delayed and the disks did not show up until Monday. I had now been down a whole week from my first call the Monday before.
The new set of disks was 3 DVD’s labeled for the T430, Machine type 2342 and Windows Pro 7, 64 bit. I started the build process. It continued to work but I made a mistake in the order of disks so I thought that these disks have a problem too. I called Lenovo and they said that I should just send the system in for depot repair. I said that will take at least until probably Thursday. The guy I was speaking to said that I should have it back by Wednesday. I asked if there was any way that I could send it to them directly that day. He said no I could not, I had to wait for a box. I asked if there was anyway to expedite the process and he spoke to his manager and his manager said that the level of service that was on the machine would not allow for any faster service. The also told me that my service contract would allow me to take it to an authorized Lenovo service center around me. I said to him that they probably have a queue as well and that I will have to wait for that. As an aside note we did try service like this with one of our other ThinkPad’s that had a problem and the place messed up the system and we ended up at the end of the day having to send it to their depot for repair. I hung up and though let me try these disks one more time. I did and I saw my mistake and the system loaded up the DVD’s properly. I was getting excited that I could be up and running shortly. However my excitement was short lived. Once it started to reboot and expand the installation the drive failed and said that it had to run Checkdisk. It did and once again there were all kinds of orphaned files etc. I had to reboot and run it from the DVD’s again and I went through the whole process once again. The system went into a complete failure and would not do anything. I called back support with my case # and gave them this information. The box came the next day and I packed it up and sent it off. I then started tracking it and it arrived on Wednesday as expected. Then I wanted to go to the site and track the progress of the repair. The document you have to fill out and send back with the system gives information on where to go on the web to track the process. My shows that it arrived on Wednesday 4/8 as expected. The first message shows “Machine being repaired” at 08:52. Then I checked later in the early evening hoping to see shipped back to customer. However what I did see was the following message “Hold for Parts – Service call is on hold until parts arrive”. Then I kept tracking it and saw another entry on 4/10 at 02:01:54 which was the same “Hold for Parts – Service call is on hold until parts arrive”. That was of course Friday. I called the service and they told me that they were waiting on parts which they could not tell me what parts and that there was nothing that they could do. I then asked if there was anyway to expadite this and the girl I spoke to said that she would seek to accelerate this to another level and that I would get a call from Lenovo in the next 2 to 3 business days! I said to her that you really mean that that is accelerating it and she said yes. Yesterday I received a call from an automated attendant, not a real person who told me that they were waiting on parts for my computer and that it could be “5 to 7 business days before they receive the part”. I could not believe this. I called again today 4/15 and asked if anyone could tell me the status because the website told me very little. I told the girl that I was speaking to that I had received this automated attendant telling me that a part would take 5 to 7 business days more. I asked her if Lenovo kept parts and she said yes but that this part was not in stock. I asked her what the part was and she was able to find that it was the main system board that had to be replaced. I said you have already had the unit for 1 week now at depot repair and never mind the fact that I have been without my computer for 2.5 weeks. She told me that there was nothing she could do and that I had to wait on the part. That is where this case sits at present.
I am very very unimpressed with Lenovo’s service. And furthermore there is no one to talk to about it at Lenovo who gives a care. I really did not know where to air my grievances with how this case is being handled. I thought maybe the forum would be a place. At least others will learn of my dilemma and maybe others have experienced the same thing.
I still like my ThinkPad but the service of Lenovo has become very poor at best. The guy that is my technical manager has had a poor experience of late ordering up some other Lenovo products and he does not want to purchase anymore and these were for new product. They sent the laptop with the wrong software loaded and then said no problem we will send you a new set of disks to load. He refused and said you have to fix this because it was Lenovo’s mistake. It takes time to load software and time is money. I believe we will be leaving the Lenovo field if things continue. I hope and trust that others will not experience the same treatment as I/we have. I wonder if Lenovo will even respond to this post.

I had a real problem with wireless performance on multiple ThinkPads with Win7 until I realized there is a new (or maybe changed implementation) power setting in Win7 which was affecting it.
If you go into Control Panel -> Power Options and click "Change plan settings" for your current power plan.
On the next screen click on "Change advanced power settings"
On the next screen expand "Wireless Adapter Settings" and then "Power Saving Mode"
Make sure it is set to Maximum Performance.
Not sure if this will help your particular problem but hope it does.

Application crashes in Windows 7 64bit made in Labview 2010 sp1 f2 with Fault module name%3A lvrt.dll%2C version 10.0.0.4033 and exception code c0000005

I build an application exe and then its installer along with run time environment.
The installers instals the application correctly but when I try to execute the application, I get an error that application has crashed and Windows must close it down or search for solutions online with this additional information for the crash.
Problem signature:
Problem Event Name: APPCRASH
Application Name: AGMS.exe
Application Version: 1.3.0.0
Application Timestamp: 4c24e8f5
Fault Module Name: lvrt.dll
Fault Module Version: 10.0.0.4033
Fault Module Timestamp: 4c9273f4
Exception Code: c0000005
Exception Offset: 00005310
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
I am using labview 2010 sp1 32 bit on a 64-bit machine, with the following specs
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.130318-1533)
Language: English (Regional Setting: English)
System Manufacturer: Dell Inc.
System Model: Dell System XPS L502X
BIOS: Default System BIOS
Processor: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz (8 CPUs), ~2.0GHz
Memory: 8192MB RAM
Available OS Memory: 8106MB RAM
Page File: 3457MB used, 12753MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 32bit Unicode
The exe /application runs fine on my PC but when I try to run it on another PC it crashes. The other PC has similar specs as given below
Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.140303-2144)
Language: English (Regional Setting: English)
System Manufacturer: LENOVO
System Model: HuronRiver Platform
BIOS: Default System BIOS
Processor: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz (4 CPUs), ~2.2GHz
Memory: 4096MB RAM
Available OS Memory: 4010MB RAM
Page File: 1359MB used, 6658MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 32bit Unicode
I tried another machine, 64 bit of course, as I want to deploy my application on a 64bit PC, but still got the same problem.
This other machine was from HP, iCore 3 (4 CPUs) 2.2GHz, 4GB RAM and running Windows Professional 64 bit.
Now as I see it, it could be a Run-time environment mis-match error.
For this I tried installing a 64 bit LVRTE from NI, but still no sucess.
I checked DEP, for all 3 PCs and it was set to the following
Turn on DEP for essential Windows programs and services only (first option).
I am confused. I can not find a solution for this and it is really frustrating.

But I am assuming that when I make the installer, the 32-bit Run Time Engine is appened with the installer, as show below
Since from the picture you can see its including the support installers from '\Program Files (x86)\'
The application runs queries to fetch data from database in SQL server 2008, and for that I am using a Microsoft SQL Native Client 2008 R2 64 bit ( this is the only version that installs on either PC, even the one on which I developed my LV Application).
I am not using any driver, only toolkits for reports - and for that I un-checked the "Remove unused polymorphic VI instances" when making the executable, otherwise LV throws up an exception that share variable are not being included.
Yes I did reboot every time after I ran the installation.
Still getting the same error.

PSE 8 crash in Windows 8 Pro

Similar Messages

Maybe you are looking for