Purchase of variant configuration material from external source
Hi,
I am working with variant configuration scenario , Here some material procured from external source and per characteristics requirements , these characteristics have varied price , these price should be maintain at condition level .
The Material purchases from external source its price according to characteristic select.
Pl helps me how these scenario resolve.
H Rajesh,
1.Create another New characteristic called ZPrice .Give the description and go directly to Addnl Data Tab.Here in the table name Enter "MMCOM" and in the Field Name Enter "VKOND" at CT04 & save .
2.Now Goto CT04 in change mode, for Zprice Go to values tab and select RED &.Goto Extras-> Object Dependencies->Editor and then select Procedure & define condition.
3. Goto Inforecord Choose Extras ->Variant conditions.
Enter a variant key. Choose the desired condition type and specify the period during which the discounts and surcharges are to apply.
Enter the amount and save.
For More help please Refer Below SAP link
[Variant Configuration |http://help.sap.com/saphelp_47x200/helpdata/en/92/58d455417011d189ec0000e81ddfac/frameset.htm]
Regards
Pradeep
Edited by: Pradeep Kumar on Mar 4, 2008 10:36 AM
Edited by: Pradeep Kumar on Mar 4, 2008 10:37 AM
Similar Messages
-
Problem while creating PO from SO for a Variant configurable material
Hi
i am facing a problem when i am creating a Purchse order from a Sales order.
the material is a variant configurable material and we are creating a Sales order in Future date say in june.
For one of the materials in the SO the configuration is different today and the configuration is different in June.
Today the BOM contains different materials and in june there is a different bom for the material.
and according to my understanding the BOM gets exploded on the basis on the delivery date in SO.
here on the basis of the config which is valid in june materials are getting picked and that is correct.
when i try to creat a PO out of that SO i could see that the BOM gets exploded and correct materials are picked but i get the error message that inforecord for one of the componentes is not there.
but that component is not getting selected in the config..and it is not there in BOM in june.
It is there in the BOM today but not in JUNE.
I dont understand why the system is refering to that componeent and throwing this error
please help
Thanks & Regards
sarikaYou may try creating two BOMs -- one speicfic to the date of order.
Sanjeev -
How to merge key field from external source system with SAP R/3 master
Hi,
In SAP BW 7.0 system, our scenario is Master Data for 0GL_ACCOUNT is coming from SAP R/3 alongwith the Transactional data records for standard FI cubes. Then, one more set of transaction data is coming from external source system, a flat file, into another custom DSO(ZDSO_FI), which also has this GL Account field.
This flat file's GL account, GL_file, has to be basically mapped/merged with the standard 0GL_ACCOUNT field so that at the time of loading the transactional data for custom DSO, ZDSO_FI (with transformation mapping GL_file > 0GL_ACCOUNT), system automatically refers to the 0GL_ACCOUNT master data to load these incoming transactional values, from the external flat file system. How can this be done?
To illustrate the scenario, say I have 5 records in 0GL_ACCOUNT, loaded from SAP R/3 into SAP BW-
0GL_ACCOUNT Short Description Source System
100 D1 R/3
200 D2 R/3
300 D3 R/3
400 D4 R/3
500 D5 R/3
Now suppose if my flat file has following sample transactional data, to be uploaded in SAP BW ZDSO_FI-
GL_file Key Figure1
400 789
200 567
Then after uploading this transactional data in ZDSO_FI (with transformation mapping GL_file > 0GL_ACCOUNT), the 0GL_ACCOUNT data becomes as below-
0GL_ACCOUNT Short Description Source System
400
200
100 D1 R/3
200 D2 R/3
300 D3 R/3
400 D4 R/3
500 D5 R/3
So note that the system did not refer the incoming GL's from flat file, although the field is mapped to 0GL_ACCOUNT in transformation, to the already available master data. Rather created 2 new data rows for the GL accounts coming from external system. Because of this I am not able to perform the calculations common from standard FI cube and ZDSO_FI, with GL account as key field. I need to synchronise these data values based on GL Account to proceed with further calculation and am badly stuck.
Request if anyone can please throw some light on how to achieve this seemingly simple requirement?
Thanks in advance.
NirmitBetter post this thread is in the [Enterprise Data Warehousing|Data Warehousing; forum.
-
I can't paste text from external sources into Photoshop CC 2014.
Hello everyone,
Since a few days I'm not able to paste texts from external sources into Photoshop CC 2014.
I never have problems with Photoshop CC before.
I have the new iOS Yosemite installed in my macbook.
It's really frustrating, can someone help please?I have basically the same setup, except on a Mac Mini. I am unable to reproduce your problem. Double check that you are copying the original text in the first place, and then make sure you are pasting into a text layer as you cannot paste into a regular Photoshop layer -- nothing will happen. Create a text layer by clicking on a regular layer with the text tool, the T in the tool box. The new layer will show up in the layers panel identified by the first line of the text.
-
How to create Variant Configuration Material Master in SAP PP
Dear Friend's,
Pl 's guide me for How to Create Variant Configuration Material Master.
Give me step by step procedure for Creation of Variant Configuration.If some of you having screen shots for the same with one Example, that will be a very helpful to me for creating VC.
Thanks & Regards,
Sandeep N.TheurkarHi,
Eg: Ford car.If a sale order is raised for fiesta lxi model the system should choose red colour & for vxi blue colour respectively.
ie you need to define the characteristic and assign the values .
This characteristic need to assigned to class.
class need to be assigned to material master
1. T.code : CT04(characteristic) FORD_MODEL, Choose single value & entry required tab & give the input as 01 - fiesta_lxi & 02 - fiesta_vxi.( characteristic values)
2.Tcode: CT04, FORD_BODY( another characteristic)
Choose single value , don't click entry required.
01 - Red( characteristic values)
02- Blue
3. Create class T.code : CL02
fiesta_class
type : 300
4. OBJECT DEPENDENCY:
T.CODE : CT04
FORD_MODEL
CLICK VALUES TAB,
IN FIESTA_LXI CLICK THE 'O' meant for Obj dependency, action & extra.
Edit the dependecy,
010 $Self.ford_body = '01'. & save
Repeat the same for FIEST_VXI & instead of '01' give '02' for blue colour.
, then create a ROH as ford_body. & a KMAT material for the car. .
Then create a Super BOM with usage 3 & give component as ford_body
Then use T.code cu41 (Create config profile)
enter a profile name & class 300 & choose class assignment, choose fiest_class ,
Use T.code cu50 to check the values.
Then create a sale order.
Pl. reward if helpful.
Regards,
nandha -
BAPI/FM in ECC to create a sales order with variant configurable material
Hi all,
I need to create a function module that creates a sales order in ECC with a variant configurable material.
can some one tell me if there is a in built function module or BAPI that i can make use of to create a sales order with variant configurable material in ECC.
Regards,
Jessica SamThanks MxG,
I dont know how to use this BAPI. .Can you suggest me a sample code.
My reqmnt is, i have
Sold to party, ship to party, bill to party , VC config material and all char values that should be populated while creating a sales order.
please help me with what values should i populate in i/p paramters and and how to use this BAPI with some sample code if posible.
Regards,
Jessica. -
How to import user profiles from external sources(other than AD) into SharePoint
Hi,
I want to import user profiles from external sources other than AD.
BadriYou have to use BCS for importing the profiles,
Check the following link with explanations
http://msdn.microsoft.com/en-us/magazine/ee819133.aspx
Please Mark it as answer if this reply helps you in resolving the issue,It will help other users facing similar problem -
U00A7VC in Purchasing, Purchase requisition of configurable material
Hello Experts,
We have the scenario as described below:
Material A - Parent KMAT (Internally Manufactured)
Material B - Child KMAT (Internally Manufactured, Has its own BOM &assigned to BOM of Parent KMAT with item category L)
Material C - Child KMAT (Externally Procured, No BOM of its own & assigned to BOM of Parent KMAT with item category N).
All the 3 materials have their own Chars,Class& config.profile.
Now, In CU50 while configuring Material A, we see a separate line for Material B under Material A for configuration. The values are assigned and the process goes as expected till BOM explosion and no issues with it.
However Material C does not show up in CU50 for configuration while configuring Material A. If Material C is entered in sales order, no Purchase Requisition is created in MRP run (Sourcing,info record.etc have been taken care of and the material can be procured with no issues when directly creating the PR).
It would be of great help if someone could help me solve this. We should be able to configure Material C while configuring Material A in CU50 and a PR should be generated with assigned values for Material C.
Any solution will be amply rewarded.
Thank You,
ManojHai Manoj,
i have a few clarifications on your request. You have explained that
Material C - Child KMAT (Externally Procured, No BOM of its own & assigned to BOM of Parent KMAT with item category N).
If material C does not have BOM then why do you maintain this as KMAT. Cos KMAT are materials which have super BOM and it gets picked from the characteristic values which we provide.
So can you please check on this. Please reply me back for us to discuss further.
Thanking you in advance.
Regards,
Kris.S -
Recording from external source
I am brand new to Mac / switched from pc a week ago. not able to figure out some things yet and havent found answers in support. mostly on the basic stuff. like I was able to record audio from a lp turntable on a pc. it looks like there is no recording program built in to the iMac, or am I wrong? will I have to purchase some type of software to record from external record or tape source?
Sorry some heavy-handed moderation has been going on here. I accidently duplicated my post when I edited it to say 'Welcome to Apple Discussions'. Then I asked the mods to remove the first post above and they've gone and deleted my second post and yours; I am sorry about that.
You posed a question about Real Instruments in the absent post. A Real Instrument can be a microphone input or any device that connects to the Audio-In port (or a USB/Firewire Audio device).
Hope that helps.
mrtotes -
Process order with variant configuration material
Hi,
I create a process order for a material XX.
This material has a BOM with a material that has variant configuration "class type 300" for price configuration.
When I save the process order I get a message saying "There are still characteristics for components to evaluate". I dont want to evaluate this material in my process order.
What can I do to not have this message?
Regards.Hi all,
Yes, I work with variant configuration. But sales orders are not involved.
What I do is:
1) I create a purchase order for material X (this material belongs to a BOM), this material has variant configuration. I give a value to the characteristics in the PO.
2) I create a process for a material XXX that has a BOM (material X is in the BOM and cannot be removed).
3) When I save the process order the system asks me to evaluate again the characteristics. This is what I dont want it to do.
Any ideas?
Regards.
Eduardo -
I have just upgraded to Firefox 3.6.12 and links clicked in an external source will not open in Firefox.
Firefox is set as my default program for web browsing. I have tried to open links from Outlook, Dreamweaver, Digsby, and other programs.I have the same issue, opening links from external programs like Word or Thunderbird does not work. This used to work before the update to 3.6.12
-
How to get data from external source
Hi experts,
I want to get data from a different source e.g. from oracle. How can i get the data in BW??
SamHi Samir
there are different interfaces are available according to the source system.
For Oracle source system you can use DB connect interface.
you can extract data from several data sources to BI
File Interface:: Using this interface, you can access files in ASCII format or CSV format
DB Connect :: You use DB Connect to open other database connections in addition to the default connection and use these connections to transfer data from tables or views into a BI system.
UD Connect :: UD Connect (Universal Data Connect) uses the Application Server J2EE connectivity to enable the reporting and analysis of both SAP and non-SAP data. Using UD Connect, you can access all relational and multidimensional data sources. UD Connect transfers the data as flat data.
BI Service API ::
Web Service for Staging ::You use the Web service to write the data from the source into the PSA. The transfer of data is controlled externally, without placing demand on BI.
You can use this interface in conjunction with real-time data acquisition.
Please assign points if this info helps.
Regards
Vivek.. -
Querying data from External Source from FORMS
I have a form that is built based on Oracle tables.
But I need to get data from external Data source from within Forms and use it fro validation.
I need to execute a Select statement via ODBC from within Forms procedures. This is going to a SQL Server DB to get some information.
Any thoughts?
ThanksHi
What version of forms do you use? If you use forms 6i, take a look at the EXEC_SQL package. You can access oracle databases and ODBC databases (using OCA) independently of the main database connection -- well, I never tried but that is what the documentation says.
I am not sure about version 9i... the package is there, but I could not find anything in the help about it (what is not a good sign...)
hth
Luis Cabral -
Using ALE to synchronize Variant Configuration data from Production to Dev
SAP Gurus,
We are trying to move away from opening our production environment every time with need to add new Variant configuration for products.
In order to do so, we need to ensure that our development and staging systems are in line with production LO-VC data. We have been looking at a possible ALE solution but I would like to get other suggestions.
Any thoughts you may have with regards to either pros and cons of ALE, or another solution we may have overlooked. If your clients are transporting Variant Configuration to production, what method are they currently using to ensure data consistency between environments.
Our landscape currently has two production environments for two separate business lines but both use LO-VC therefore we would like to standardize the process.
Thanks and Regards,
Kevin Webb
SAP SD Senior ConsultantHi Webb,
General its a complex process to transport VC but for system consistency you can:
1. do the changes Manually in each system
2. Use ALE idoc process to transport.
But ALE transport generally used for fresh VC transport, if the VC already present in transporting system, it may cause inconsistency. Hence if you want to transport some changes then I can suggest you to do MANUALLY.
But if you are transporting VC freshly in each system, go for ALE.
try and revert -
Geturl("from external source")
Hello,
I'm trying to figure out how I can get the url from an
external source? I want to make a file that holds the urls and when
the item is called it pulls the url from the file. Is this
possible?
Thanks,
RyanCiao
I do not think is possible right now but this is a great
suggestion for FL
Alessandro
Maybe you are looking for
-
Hi All, I wanted to do the formatting in ALV report output. How I can do that? Formatting means colour the field, & all. If possible send me any sample code.. Regards, Poonam
-
Unable to install flash player due to NPSWF32.dll error
My issue is that I recently tried updating my adobe flash player for use in Firefox. I had removed my old version, and upon installing the new flash player 10 I was given the message "Error opening file for writing: C:\windows\system32\macromed\flash
-
Mail app crashes after sending 5 photos
I Tried sending email to myself using mail app on ios 8.1.2 on my 4s. The app crashes. I tried again with mail app and the mail crashed again . I tried again using winzip app directly. Selecting photos and using the winzip app to send. Crashed again.
-
Greetings, After the installation of the extension pack (local sql server and installed local) i get this warning: Common requirement SSMA Runtime emulation components were not found on SQL Server, please check if Extension Pack is installed correctl
-
Error in BAPI_SALESORDER_GETLIST
Hi Folks, I am working on BAPI_SALESORDER_GETLIST from VB. I have taken mandatory parameters as CustomerNumber and Sales Organization. While I am executing this in VB I am getting the following error Parameter CustomerNumber of Method