Qosmio G30-161: How to set dual screen in Vista

Hello, I have tried loads but am getting no where, I can get the other screen to work by shutting down and booting up but I only ever get one screen to work is there simple step by steb guides to getting dual screen working my machine is a G30-161 running Vista Ultimate.
Many thanks
Michael

I have had the same problem. I have a Qosmio G25-av513 which came with XP. I upgraded my operating system to Vista Ultimate and have everything working fine but have lost the ability to use the FN-F5 to activate a second display. After reading this user's similar problem, I tried turning my laptop off, connecting my projector and turning my laptop on again.
The projector now works but the laptop screen will not turn on until I disconnect the projector and reboot.
Anyway, I can live with that!

Similar Messages

How can I know what kind of RAM my Qosmio G30-161 has?

I want to add more ram to my qosmio G30-161. I could not find any info about what kind of ram or max ram that can be added from the manual. I read once but do not remember where that it is max 4G with 2g each ..DDR2 .
I use windows media center as operating system- 32b.
my question is where you can find the informations about the extension of memory ? so that i can buy the right ram

Hello
If you want to pick up info about compatible high quality Ram modules I can recommend you to visit Kingston page. The full info about Rams for Qosmio G30-161 you can find HERE .
Bye

How to set the screen size with nested Iview screen

Can someone show me how to set the screen size with nested IView screen.
at the moment i only try it with trial and error untill it looks somewhat close. Is there a property in VC to set the size for Height and width.
The same question is for the form. the form elements inside the form is easy but the actual form is still a challenge.

Hi,
Yes you are correct ,Still the Form and iview are not able to change thier Layout Structure using a Propery.
it is available with VC7.1
Govindu

How to set full screen camera on ios 8 on iphone5s

How to set full screen camera on iphone 5s having an ios8

HI,
Give the width in % instead of mentioning in pixels.
ie. for full width, give 100%.
Make sure the layout is GridLayout.
Regards
Fahad Hamsa

How to set selection screen

I have a question that ...
i have 2 options --
when select 1st option , show group1 screen
when select 2nd option, show group2 screen
like the follow ..which is pretty work!....but i have another question that how to set the screen field ..
my question is that if i select group1 screen...i want to set
if S1_EBELN = '' and S1_IHREZ = ''.
 message e398 with 'pls input one of these two options!'.
elseif S1_EBELN ne '' and S1_IHREZ ne ''.
 message e398 with 'Only one of these two options input is allowed！'.
endif.
i've tried to insert these statement within the LOOP...but not work ......
so can anyone know how to set?
PARAMETERS:
R1 RADIOBUTTON GROUP OPT1 USER-COMMAND R DEFAULT 'X'.
PARAMETERS:
R2 RADIOBUTTON GROUP OPT1.
SELECTION-SCREEN BEGIN OF BLOCK RPT1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS: S1_BUKRS FOR EKKO-BUKRS MODIF ID ABC.
SELECT-OPTIONS: S1_EBELN FOR EKKO-EBELN MODIF ID ABC .
SELECT-OPTIONS: S1_IHREZ FOR EKKO-IHREZ MODIF ID ABC .
SELECTION-SCREEN END OF BLOCK RPT1.
SELECTION-SCREEN BEGIN OF BLOCK RPT2 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS: S2_BUKRS FOR EKKO-BUKRS MODIF ID DEF.
SELECT-OPTIONS: S2_MBLNR FOR MKPF-MBLNR MODIF ID DEF.
SELECT-OPTIONS: S2_XBLNR FOR MKPF-XBLNR MODIF ID DEF .
SELECTION-SCREEN END OF BLOCK RPT2.
IF R1 = 'X'.
 LOOP AT SCREEN.
 IF screen-group1 = 'DEF'.
 screen-input = '1'.
 SCREEN-required = '1'.
 SCREEN-INVISIBLE = '1'.
 screen-input = '0'.
 screen-output = '1'.
 screen-active = '0'.
 MODIFY SCREEN.
 ENDIF.
 ENDLOOP.
ELSEIF R2 = 'X'.
 LOOP AT SCREEN.
 IF screen-group1 = 'ABC' .
 screen-active = '0'.
 screen-input = '0'.
 screen-output = '1'.
 MODIFY SCREEN.
 ENDIF.
 ENDLOOP.
ENDIF.

Modified ur code .
tables : ekko, mkpf.
PARAMETERS : R1 RADIOBUTTON GROUP RG USER-COMMAND R DEFAULT 'X'.
PARAMETERS : R2 RADIOBUTTON GROUP RG .
SELECTION-SCREEN BEGIN OF BLOCK RPT1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS: S1_BUKRS FOR EKKO-BUKRS MODIF ID ABC.
SELECT-OPTIONS: S1_EBELN FOR EKKO-EBELN MODIF ID ABC .
SELECT-OPTIONS: S1_IHREZ FOR EKKO-IHREZ MODIF ID ABC .
SELECTION-SCREEN END OF BLOCK RPT1.
SELECTION-SCREEN BEGIN OF BLOCK RPT2 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS: S2_BUKRS FOR EKKO-BUKRS MODIF ID DEF.
SELECT-OPTIONS: S2_MBLNR FOR MKPF-MBLNR MODIF ID DEF.
SELECT-OPTIONS: S2_XBLNR FOR MKPF-XBLNR MODIF ID DEF .
SELECTION-SCREEN END OF BLOCK RPT2.
at selection-screen output.
IF R1 = 'X'.
LOOP AT SCREEN.
IF screen-group1 = 'DEF' .
screen-active = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
IF R2 = 'X'.
LOOP AT SCREEN.
IF screen-group1 = 'ABC' .
screen-active = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
at selection-screen .
if r1 = 'X'.
if s1_ebeln[] is initial and s1_ihrez[] is initial..
message e001(zxx) with 'pls input one of these two options!'.
endif.
if NOT s1_ebeln[] IS initial.
IF NOT s1_ihrez[] IS INITIAL.
message e001(zxx) with 'only one entry in Ebeln or Ihrez is
allowed'.
ENDIF.
ENDIF.
endif.
START-OF-SELECTION.
WRITE:/ 'hi'.
***add on
split the text into two texts .
if NOT s1_ebeln[] IS initial.
IF NOT s1_ihrez[] IS INITIAL.
message e001(zxx) with text-001 text-002.
*'only one entry in Ebeln = text-001
or Ihrez is allowed'. = text-002.
regards,
vijay

I want to be able to monitor my teen daughter's computer from home using screen sharing. Anyone know how to set up screen sharing when my daughter's school has her computer set up for Apple Remote Desktop?

I want to be able to monitor my teen daughter's computer from home using screen sharing. Anyone know how to set up screen sharing when my daughter's school has her computer set up for Apple Remote Desktop?

ARD won't be as smooth as you think over the Internet and be a security risk for your daughter.
Your best bet would be to install nannyware, then when she's asleep you can review the logs.
This is the best and Mac friendly
http://www.internetsafety.com/

Need help with my Toshiba remote control and receiver for Qosmio G30 161

Hello to all
I have a Toshiba Qosmio G30-161 and with it I have a Toshiba remote control and a Toshiba remote control receiver, this is the first time I have used it (tried to that is), my problem is the remote is not working on the computer when I press any program buttons the computer does nothing.
I have installed four brand new AA batteries and the remote works fine its sending signals to the receiver, the receiver the detecting the remote as a red light appears every time you press a button and as for the computer I have checked the drivers and the USB is picking up the receiver as a E-home remote receiver which I have checked with Toshiba and that is correct, so all in all the remote is working, the receiver is picking up signals and the pc has detected the receiver but nothing works, I have installed remote control manager but this still has done anything. I have spoken to Toshiba help and support and the end result is they are not sure what the problem is. Can anyone help I require the remote for slideshows for customers as I??m a photographer.
Also to confirm I am running Windows XP MCE addition.
Anthony Worlock

Hi there,
this remote contol works, if you use it without any special drivers and special software, only in the Media Center.
But if you install such stuff like [WinLirc|winlirc.sourceforge.net] then you should be able to get some functions for your presentation.
Please try this tool and check if it works.
By the way: If I were you I would first read the Manual and FAQ of WinLirc before starting because its a little bit tricky to handle the program. :) (Too many settings :D)
Greets

Qosmio G30-126: how to connect analog TV and satellite TV simultaneously

Hi, I have a Qosmio G30-126 and have a problem with simultaneous receiving analog TV (by TV-in port in built-in TV tuner) and satellite channels from satellite set-top-box (by AV-in ports).
I can programm Windows Media Center for analog TV (but without satellite STB) by antenna TV-in port and it works perfectly.
I can programm Windows Media Center for digital channels from satellite STB (but without analog TV) by AV-in ports and it works perfectly.
But i can't program Windows Media Center for both analog TV i satellite STB, because during programming WMC forces me to choose between analog TV or satellite decoder and doesn't allow me to choose two signal sources.
For me it is a big problem, because I have cable TV (analog) and satellite STB with digital channels. And I want to watch on my Qosmio all channels.
Could anyone help me?

>... because during programming WMC forces me to choose between analog TV or satellite decoder and doesn't allow me to choose two signal sources.
I think in this statement you answered your question. I had Qosmio G30 long time ago and i also know that WMC cannot handle with two signal sources at the same time.
To confirm this contact Microsoft and ask them. I mean they have designed WMC and know how it works exactly.
Toshiba has just offered proper hardware (TV tuner) to offer TV option on this notebook.

Qosmio G30-116: How to connect the Sky Digital box to watch TV?

I just recently purchased the Qosmio G30-116 on the understanding that I can connect my Sky digital to the laptop (somehow) and watch and record sky on the laptop
* note: I am not using freeview or normal TV I am using SKY DIGITAL *
usint the supplied converter cable to connect to the video-in on the laptop (video in is like a headfone jack and the converter converts from this to female RCA)
I have plugged it into the laptop then connect a 3 RCA to SCART to it and then into the sky box, when setting up the TV section in Windows Media Centre I follow the instructions until it gets to the point where it scans for a signal, (previous to that I get asked what kind of signal I receive, I select digital but have tried all combinations,) but it doesn't find a signal.
Now I have been told that Windows Media Centre does not support Analogue input and that the connection between the sky box and the laptop is analogue.
Is this correct or not? then, while typing this I have been told by someone else that my laptop is not capable of receiveing SKY DIGITAl as it can't decode it or something. Is this also correct? If not, what am I doing wrong and can anyone help me get this going? And have I been going about this the right way or am I totally up the wrong path if laptop is capable of it?

To start qosmio player
1.switch off computer using on/off blue lit on/off button to close windows operation.
2.make sure that the computer/windows is switch off
3.Now Touch the TV icon (Blue lit button)only or the DVD player ICOn (blue lit button)only. WITHOUT USING THE USUAL ON/OFF SWITCH
4.The qosmio player/engine will switch on instantly without booting windows.
5.TV will launch within 8 seconds and the same for DVD player
6.Pres F1 or F2 for further functions such as screen size,audio,forward.rewind.pause scanning the TV channnels (auto or manual)
7.You can do the same i.e open the qosmio player/TV with the supplied Toshiba/qosmio remote pressing the Live TV button ONLY for instant TV on or DVD menu ONLY for instant DVD player/CD player on WITHOUT USING THE ON/OFF SWITCH ON THE REMOTE.That is very much similar to a standard TV remote just press the TV or dvd menu .
8.If you touch the same icon buttons i.e TV and dvd player during the standard computer usage /windows operating system,IT WILL LAUNCH THE MEDIA CENTER BY DEFAULT.that's what happen to you!
I use the remote from my bed before going to sleep and the same from bed to watch early morning TV news
Qosmio is excellent for the versatility!
Enjoy
min
Message was edited by: min
Message was edited by: min

Qosmio G30: blue vertical lines and blue screen crash dump

I have a Qosmio G30, Model No. PQG32C-AV605E with BIOS Version 3.40.
I want to update to 3.90 but I cannot enter Windows.
How do I update BIOS with no Windows available?
Is there a DOS utility?
If so, please send it and I will download it or send me an email on where to download.
The G30 I have has blue vertical lines across the screen when the machine starts up in VGA mode upon entering Windows for the first time.
But the machine can't enter windows, it crashes and dumps and restarts before that.
I replaced the RAM with new RAM but it had no effect.
I ran the diagnostics utility and the hard drives are OPTIMAL in RAID 1 so no errors there.
The reinstall of Windows went smoothly: I just can't get into VGA mode without lines.
I was told by Toshiba tech support that a BIOS upgrade would fix it.
Thanks for any helps.

I made best experience with Toshiba support. The ASP guys were always helpful
I can understand that you are upset but this is cannot be a explanation for you last replay
Fact is that you can update the BIOS ONLY running windows OS because you can download ONLY win-based BIOS!
If you are not able to do this (no matter why) then you will need to get in contact with local ASP (service provider) in your country who could update the BIOS using a traditional BIOS version.
But in my personal opinion the vertical lines are not related to any BIOS issue and I think a BIOS update would not help you in my opinion its more hardware issue as an software issue.
Therefore you should get in contact with an local ASP in order to discover what's part is affected.
Good luck

How to set full-screen page displaying automatically on portal.

one viewset included two views (named topView and detailView)
putting a table control in the detailView,boz of many columns of the table exceed the width of portal screen,which result in the topView is the same width to the detailView.both of the two views exceed out of the full-screen width.but i don't wanna move the topView when i drag scroll horizontal bar control. so i added a ScrollContainer into the detailView,and put the talbe control into it.
the confusoning is :i don't know how to set the the width of the ScrollContainer cotrol , to keep it full-page displaying any time on portal .
u know the IE'Screen resolution setting maybe different ,e,g,:1024786px and 800600px.

HI,
Give the width in % instead of mentioning in pixels.
ie. for full width, give 100%.
Make sure the layout is GridLayout.
Regards
Fahad Hamsa

Qosmio G30-126 - How to get access to the bios!

I have a laptop Qosmio G30-126 and I don't know the key for entering the bios to change to properties for the HDD or any thing... so how to get access to the bios? what is the key for the bios??

Hi
Try to press the F2 button while powering the unit.
Older Toshiba notebooks supported the ESC and then F1 button
So these two options are possible

Qosmio G30 - shady dark lines on the screen

Hi
I bought Qosmio G30-116. Overall great but there is one issue. On the bottom of the screen there are two big shady dark lines (the brighter the color of background is the more wisible it gets.
It is very anoying I bought it mainly for movies. I took it to the shop where I bouth it but they've said it is normal and all toshiba 17" screen have it. But I have seen 3 other models with 17"(qosmio resolution stays the same) and none of them had it.
What should I do? Is it really normal? Thanks

Puuuhhh. Hey pitorek, its really not easy to say if its a display malfunction.
But I think this question could be answered by a authorized technician.
I think you should contact the service partner in your country (I assume youre from Poland ;)) and explain the guys the situation. I think you should send him this screenshot.
Possibly you will get a replacement. But I dont know if it could be a display fault or fl inverter or something different.

Qosmio G30-161 does not boot - NTDLR' File is Missing

Hi all,
I have a G30-161 twin hard drive (in Raid 1) that will not boot..
It just gives the message 'NTDLR file is missing' and is followed up with a prompt to restart the computer at which the same error will be displayed again.
I've been given this laptop by my son to fix (lucky me :( ! )
Things I've looked at so far:
- Checked the BIOS to see if the drives are configured correctly - BIOS states both hard drives installed, online and in RAID 1
- I had a Windows XP Install Disc to hand so tried to see if it would boot from a CD. It started on the CD ok but the Windows Recovery Console/Install process said it could not find any hard drives. Also found an Acronis True Image Boot Disc (uses linux I think), again the program started up fine but reported there were no Hard Drives installed.
- So with the the no HD reports I took one out for a test. With drive 2 removed, on a boot attempt the system reports 'RAID 1 is DEGRADE' then follows with the 'NTDLR file is missing' . So this tells me the RAID SW is probably working and it knows a HD has been removed.
All the fixes I've read about on PC forums involve using the XP Recovery CD or some but this won't work as the system thinks there are no drives when it boots. We dont' have a Toshiba recovery disc for the machine.
Anyone seen the above problem, knows a fix?
Can I get hold of a G30-161 Recovery CD anywhere?
Any help appreciated. ...
Thanks,
Steve

Hi
It looks like your HDD is loked I found a forum thread about the same error message and the user mikeptag posted a solution:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?forumID=58&threadID=24051
I didnt test this procedure and therefore Im not sure if it will help you or not but in my opinion it worth a try
Check this and post your results
Bye

Qosmio G30-162 - How to handle dead battery?

I only use my Qosmio G30 connected to the mains. The battery is now exhausted and thus I have lost use of the computer. Do I have to replace the battery or is there any method of converting the PC for mains-only use? Any advice appreciated.. Elderly user.

Hi,
No, in such case you cant repair the battery and you need a replacement battery because battery is not repairable.
>or is there any method of converting the PC for mains-only use?
Hmm I dont know what you mean but you dont need a battery. You can also use the notebook with AC/DC adapter only. Thats no problem. :)

Qosmio G30-161: How to set dual screen in Vista

Similar Messages

Maybe you are looking for