QTJava.zip missing from Eclipse projects since iTunes 7.2 upgrade

I'm developing simple Java projects in Eclipse 3.2.1. All was working OK.
I just upgraded to iTunes 7.2 and now all my projects are complaining about missing QTJava.zip from C:\Program Files\java\j2re1.4.2_13\lib\ext. This file appears to have been deleted while performing the update.
Whats up with this??
Previous iTunes was sometime around mid-March.
I've found a copy of QTJava.zip in C:\Program Files\QuickTime\QTSystem which I've copied to the original location and the projects now build. I'm not using any of the QuickTime functionality in any of my programs.
I don't expect installing iTunes to break my Eclipse projects - is there something wrong with the Apple installer?
P4 Windows XP Pro

hmmmm. plausibly, this might be associated with a couple of recent security updates involving QuickTime 7.1.6 Java vulnerabilities. (i believe the iTunes 7.2.0.34 installer bundle comes with a QT 7.1.6, although i think it can still run with a QT 7.1.5 in place.)
there's some info on the Java vulnerabilities given in the documents listed on this page:
Apple security updates

Similar Messages

I bought an audiobook doesn't appear in my iTunes library and it's missing from my phone since the last update

I bought an audiobook doesn't appear in my iTunes library and it's missing from my phone since the last update to iOS 7.4

Did you already make sure that Apple Mobile Device Service is installed and active on your computer?
http://support.apple.com/kb/TS1567
More troubleshooting about your device not recognized in Windows can be found here: http://support.apple.com/kb/TS1495

PURCHASED RINGTONES MISSING FROM MY IPHONE SINCE I JUST UPDATED SOFTWARE TO IOS 5.0.1 ON AN IPHONE 4

purchased ringtones missing from my iphone since i just updated to iso 5.0.1 on and iphone 4. they are on my laptop as ringtones in the itunes program butwith an exclamition mark against them.
any ideas please?

Look on all you screens and inside all your folders. If you swipe to the right and type Passbook into spotlight search, it will show the name of the folder to the right of Passbook if it is inside a folder.

The package file is missing from the project directory

Today after working in SSIS all day with no problems, I re-opened one of my projects and got the message:
The package file ‘package_name.dtsx’ is missing from the project directory. This package has been skipped, and project will continue to load.
So two of my packages loaded and all remaining packages where skipped, one pop-up dialog for each “missing” package. I then looked in my project directory and all my packages are still there.
1. Has anyone experienced this and found why this happens?
2. Can I just import my packages again and be good to go?
Update:
I discovered that this had to do with renaming my packages in SSDT. For some reason the name changes did not get saved into the project .dtproj file. I was able to correct by renaming the .dtsx files in the project directory to their original name. Then
I re-opened the project, renamed the packages to the new names, saved and closed all packages. At this point you need to save the project, which actually wasn't really straight forward. You need to highlight the project name in Solution Explorer
and then from the File menu select 'Save Selected Items'. This updates the .dtproj file.
Upon closing SSDT, a dialog SOMETIMES appears asking you to save the project, after selecting Yes, the .dtproj file also updates. However, I've realized that upon closing the project, that the dialog asking to save the project does not always appear,
depending on what has changed in the project. To be safe, use method previously described, especially after renaming packages. Also, if SSDT happens to crash after you have renamed a package, the project will not re-open properly.

I remember one such occurrence when I used Source Control (if I recall right it was TFS), and yes, you can simply right-click on the packages folder and choose 'add existing package'.
But check for project file perhaps it has a wrong reference. E.g. something from the outside manipulated on the package files.
Arthur
MyBlog
Twitter

Audio missing from saved project

Hi All...
New user here, first-time "test movie" combines video with ambient audio, stills and a music track. Based on Mr. Hunt's article, here's the background information:
Dell Precision T1500 / Windows 7 Professional 64-bit OS, no pen or touch input
Processor: Inter Core i7CPU 870 @ 2.93 GHz
Installed memory: 8 GB
Single hard drive: 930 gb SATA file system, NTFS, compression unchecked / no RAID
"D" drive is HL-DT-ST- DVD+-RW GH50N DVD burner
"E" drive is HL-DT-ST BD-RE BH30N CD ROM drive
No external drives
Virtual memory: 8151 mb dynamically controlled by windows
Video Card: NVDIA QUADRO FX 580 / pci BUS 1 / driver no. 8.17.12.5896, driver date 7-9-2010
Audio System: Realtek high definition audio, 2-channel 16-bit 48000Hz / driver version 6.0.1.5919 / driver date: 8-18-09
Using PE 8.0.1, updated July 14
Project settings: Editing Mode: HD 1080i, timebase 29.97 fps, frame size 1920 x 1080, 16:9 / pixel aspect ratio: square pixels (1.0) / Fields: No Fields (progressive scan) / Display Format 30fps drop-frame timecode / title safe area 20 % / action safe area 10 % audio sample rate: 48000 Hz
Video clips: MPEG movies, image size 1440 x 1080, pixel depth: 32, frame rate 29.97. Average data rate 630-650 KB/second (there are a couple dozen clips, I didn't check them all...)
Source audio format: 48,000 Hz Compresses stereo; project audio format 48,000 Hz 32-bit floating point stereo
Music track: MP3 source audio format: 44,100Hz compressed stereo; project audio format 44,100 Hz 32-bit floating point stereo; average data rate 23KB/sec
Still images: all JPEGs, some 1280 x 960, some 2048 x 1636, pixel depth 32, pixel aspect ratio 1.0.
Other app's typically running: IE and/or Firefox, perhaps MS word and/or Publisher, Mozilla's Thunderbird. However, I've "saved" this project with *no other apps* running, and there's still no audio.
Hope all this suggests a solution...
Thanks for your help, all...
T

Thanks for all this information, T.
So why are you editing a 1440x1080 video in a 1920x1080 project? If this is AVCHD footage, it's very important to use the right project settings.
That has no effect on your audio, of course. But it could affect your video quality when you output your file.
That say, can you explain what you mean by "Audio missing from save project"?
Do you mean that you don't hear the audio in Premiere Elements -- or that you don't hear it when you output, say, an MOV or WMV file?
What file format are you exporting and what are you playing soundless this file on?
And, finally, is there no audio whatsoever, or is only some audio (music, for instance) missing from your output?

Missing movies in project since iOS 8 and iCloud Photo Library

Hi,
I've been to Europe this summer and created a movie in iMovie for iOS. That was when iOS 7.1.2 was the most current release. Today, I wanted to finish up my project. I'm currently running on iPad air, iOS 8.0.2, latest release of iMovie and iCloud Photo Library is enabled since day one. Opened the project and iMovie complained there was missing movies and offered me to search form them. It found 19 out of 40 or something. ***??? Now my movie timeline is filled with clip with exclamation mark and many transitions with pictures in them are missing too. I tryed to download clip that where in iCloud by tapping the Cloud icon but iMovie still cannot find them. How am I supposed to fix this now? My clips are there but iMovie cannot link to them... Apple, are you reading this forum?
JF

I recreated this same question here so it wouldn't show like its solved: Missing movie files in my project since iOS 8 and iCloud Photo Library
Hope we get an answer.

My music is missing from my library on iTunes

iTunes updated and now all my music (except for recently purchased) is missing from my iTunes library. It's on my iPod, but not my iTunes library (computer). I can't figure out how to get it back. Then when I want to make a playlist, it only gives me the music from my library as an option - which is only about 10% of my total number of songs. GRRRRRRRR.
What am I doing wrong?

Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash

Why is implicit deny missing from outside int incoming access rules after upgrade from 8.25 to 9.1?

i have just noticed that after upgarde of image and asdm to 911 and 711, the implicit deny acl is missing from the outside interface. Is this deliberate or a poor upgrade. i am upgrading from 8.25 normally, depends what the reseller sends me.
should this be happening or am i upgrading in too large a jump?
thanks,
david

Hi,
Would really see some screencapture / output of the thing you are referring to.
I imagine that you are perhaps referring to something related to ASDM? I dont personally really use ASDM at all for ASA configurations to I am not up to date on the possible problems it might have or changes made to its interface.
I am not sure if you have an ACL attached to the "outside" interface? If so then I think the ASDM should show the Implicit Deny at the end while this wont show on the CLI side at all.
I did just check my own ASA at home which is running 9.0(2) and ASDM 7.1(2) at the moment and it doesnt show an Implicit Deny for my LAN or WAN interfaces ACL.
Though the basic ACL operation is still in effect. If its not allowed in the ACL then its blocked by Implicit Deny. This can be confirmed with "packet-tracer" test on your firewall also.
- Jouni

Synch problem with Mail since iTunes 9.1 upgrade

I synched my iPhone 3G for the first time since the iTunes 9.1 upgrade and now have a mail problem. The mail icon on my iPhone shows 100 unread messages (it showed no unread messages prior to the synch) and there are NO unread messages, either on my iPhone or in Outlook 2003 on my computer.

I found the problem (but not the cause). When I synched, a duplicate email account was added to the email configuration on the iPhone and it showed the 100 messages in it as unread. I deleted the duplicate account and synched again and the problem did not reappear.

Problem sync photos from Photoshop Elements since iTunes 7

I have been having problems syncing my photos ever since Apple launched iTunes 7 and iOS 6. I run Windows 7, I sync my photos from Photoshop Elements to the iPad 2 and the iPhone 3GS. I never had problems with the sync prior to the September changes by Apple. What happens is that only a portion of the photos that I have earmarked for sync in their respective selected albums are making it to the devices.
In terms of troubleshooting, I have tried many things to no avail. I have tried to add a new photo to an album to sorta kickstart a sync. I have deleted the iPod photo cache from the Elements Organizer. I have removed photos from the device. I have tried syncing without syncing Photos.
None of these have worked. It's pretty clear that there is a glitch in Apple's updates, which will need to be addressed along the way. Photos traveled seamelssly in this method until the September updates.
Anyone else experience this, or have any last-dash ideas? It's pretty frustrating.

Of course, by "iTunes 7", I meant "iTunes 10.7", but can't seem to edit my OP.

Components seem to be missing from Photoshop CS5 since de-bugging PC by shop

Since my Windows-7 PC went to the shop for a clean up following some suspect virus my CS5 Photoshop seem to have some components missing.
I can get into CS5 (I had upgraded from CS3 earlier in the year and now I can't get into CS3 even though the icon is still there.) and upload a photo and use the basic tools but I can't use a lot of the ACTIONS: i.e. I get error messages like The command "Feather" is currently not available or "The command Channel Mixer is currently not available"

Sorry - This should be a better quality copy. The ACTION stops when it gets to step 2 - the FEATHER
Someone at my camera club suggested I was running out of RAM - I have 6GB so that shouldn't have been an issue.

ITunes missing from Media Browser -- "open itunes to populate list"

I am on a MacBook Pro 10.7.3 running GarageBand '11 6.0.4 and all of the sudden no tracks will display under Audio in the Media Browser (Photos and Movies still appear). No tracks from either iTunes or GB show up. This is confusing as I have been using GB to make podcast/music mixes for more than 5 years and I haven't changed any settings or done anything different, but now I get the message "open itunes to populate list" or "To see GB songs here, open GB to edit and save your music."
Also, for quite some time I have been unable to go the alternative route of dragging tracks directly from iTunes and dropping them on to the timeline in GB -- that used to work, but mysteriously stopped, so I am dependent on the Media Browser for importing music.
I read thru the forums and tried the advice given to someone this was happening to in Final Cut -- recreating iTunes .xml file. Did that, still no tracks display.
Other advice says to reinstall GB or iLife altogether -- I hope to avoid this, but if I need to go this route, how do I reinstall GB w/o a disk? Can I do it through App Store and will it recognize that I have already purchased it?
I am dying to be able to get back in to my music mix making in GB, so thanks in advance.

moontroll wrote:
unable to go the alternative route of dragging tracks directly from iTunes {...} I am dependent on the Media Browser for importing music.
another way:
http://www.bulletsandbones.com/GB/GBFAQ.html#importfromitunes
(Let the page FULLY load. The link to your answer is at the top of your screen)
moontroll wrote:
how do I reinstall GB w/o a disk?
you can't, you'd need to find the DVD
moontroll wrote:
Can I do it through App Store and will it recognize that I have already purchased it?
no, it'll only recognize your purchase if it was through the app store

Rotten Tomatoes reviews missing from UK ATV2 since last update

Hi,
Since last update to 4.2, the movie/critic reviews have 'disappeared' from rental movies, leaving only user reviews that are less than helpful.
Is this just me or have others noticed the same thing?
Thanks.

probably related to rotten tomatoes being a US review service, or apple only having a licensing agreement for the US.
also note that there is no 4.2 update for the appletv.
the current version is 4.1.1, and the previous version was 4.1.

TS5376 I am still getting "The program can't start because MSVCR80.dll is missing from your computer" and "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)" despite following all of Apples guidance to resolve?

Am I able to find a previous working version of ITunes to install?

Doublechecking. Have you also tried the following user tip?
Troubleshooting issues with iTunes for Windows updates

How can I import "extracted audio" clips from iMovie project into iTunes?

I imported my home video into iMovie HD 6.0.1 and extracted the audio. How can I get the extracted audio clip (aiff format) into my iTunes playlist?

Genny,
I just tried to answer your question over in the iMovie forum. Have a look over there.
Matt

QTJava.zip missing from Eclipse projects since iTunes 7.2 upgrade

Similar Messages

Maybe you are looking for