Quantity not updated in opportunties- CRMXIF_ORDER_SAVE

Hi,
I am updating an opportunity quantity through an external interface idoc. I am processing the Idoc using WE19 . I am passing the quantity values in  E101CRMXIF_SCHEDLIN_I_X and E101CRMXIF_SCHEDLIN_XT idoc segment . The idoc is processed successfully but the product quantity is not changed.  The values passed in the idoc segments are
Idoc Segment name : CRMXIF_SCHEDLIN_I
fIELD NAME : ORDER_QTY , CONFIRMED_QTY
iDOC SEGEMNT NAME : CRMXIF_SCHEDLIN_I_F
FIELD NAME : ORDER_QTY EQ 'X' & CONFIRMED_QTY  EQ 'X'
Idoc segment name : CRMXIF_SCHEDLIN
FIELD NAME : QUANTITY , OBJECT_TASK EQ 'U'
IDOC SEGMENT NAME : CRMXIF_SCHEDLIN_F
FIELD NAME : QAUNTITY EQ 'X'
Please advice.
Thanks.
Shanthi

Hi,
Just check by changing the Qty field to:
wa_order_items_in-target_qty = '123.000'
or '123'(in quotes).
Regards,
Anji
Message was edited by:
        Anji Reddy Vangala

Similar Messages

  • Quantity not updated in EDI Vendor posting

    Hi experts,
    We've observed that Quantity (MENGE) is not getting updated on the FI document (Segment 'E1EDP01'). Idoc type 'INVOIC01' and message we using is 'INVOIC01'.
    Any idea or has anyone come across this issue?
    Thanks for your time.

    Hi,
    Segment E1EDP01, quantity and unit of measure the quantity and the unit of measure are transferred if the corresponding fields in the billing document are filled. If the corresponding fields in the billing document are filled, but MENGE is still not updated into FI document, Maybe you have used the user exit EXIT_SAPLVEDF_002 on SD side to suppress the values.
    Best Regards,
    Gladys

  • Actual Cost & Quantity not update in Process Order

    HI,
    Process order confirmed from Production person before maintain the actity price rate.
    hence those confirmation are gone in to the error & found in t.code COFC
    afterword the activity rates are maintained & we reprocess those confirmation thorugh COFC, now there is no COFC entries
    but still actual quantity & cost not updated.

    Hi Ajay
    'Z_UPD_ACT_IN_OPR_UNICODE in the note 736018.... Ask your ABAPer to implement the program and execute the same
    You may need to raise an OSS message incase the program is not available to download
    BR,Ajay M

  • Account Based CO-PA Quantity Not updated in COEP-MEGBTR

    Hello,
    We use account based CO-PA. For  certain Billing transactions, the quantity is not coming to the BW.
    On analysis, we notice that the line item document created in COEP table is not updating the quantity field MEGBTR but only the field MBGBTR.
    Not sure what is cuasing these transactions to post differently.
    Thanks for your help. Murali

    Could you please check note 105747, 911203, 353643 or 188724, This does not pertain to ECC6 but possibly earlier releases.

  • PO Partial confirmation Quantity not updated for non-catalog items in SRM

    Hi Experts,
    Partial Confirmation plus Partial Rejection from Ariba(Suppliers network) could not be processed.
    Steps to Reproduce:
    1) Create a purchase order.
    2) Confirm some part of the quauntity and reject the balance part in Ariba.
    3) Open the link in SRM and click Copy push button.
    4) Click on Process PO and check PO, the PO is not updated with the changes done in Ariba
    Expected Result:
    PO should update the changes done in Ariba.
    Here when part quantity is confirmed and part is rejected at Ariba, its sending a POR but SRM is not updating anything for non-catalog items when POR is copied onto PO.But where as  in the Catalog items partially confirmed POR is copied onto PO.
    kindly give your valuable inputs to poceed furthur.
    Regards,
    Chandu

    Hi,
    I'm not clear you issue. Is it SC -> PR(backend) -> PO(backend) classic scenario ? or You just created a PO in backend system?
    BBP_GET_STATUS_2 will update SC follow-on doc information from backend.
    Regards,
    Masa

  • Picked Quantity not updated while using FM in background

    Hi All,
    We have a requirement to update the picking quantity in a delivery order (VL02N) through a custom screen.
    Inorder to do the above operation we are using the  Function Module SD_DELIVERY_UPDATE_PICKING_1. We find a strange behaviour while using this FM.
    The FM updates the picking quantity when executed online, but when called in the program (By passing exactly the same parameters) it does not update the picking quantity even after using a COMMIT WORK command after the function module. While debugging it was found that the XLIPS intl. table and LIPS structure was not being populated when the FM was executed through a function call in program.
    We tried using the WS_DELIVERY_UPDATE, but even this FM behaves in the
    same way.
    Please let us know as to how to over come this issue.
    regards,
    Sandeep

    Hi Babul,
    Thanks for your reply. I actually tried using even the above mentioned FM. But I am faced with the same error. The problem is that in one of the includes LV50LF01 (Subroutine READ_DELIVERY) of the FM, the internal table XLIPS gets refreshed. This happens only when the FM is called in our program.
    regards,
    Sandeep

  • Quantity not updated in Asset master after Good Receipts

    Hi,
    Can someone tell me is it SAP bug after Good Receipts done, base on the following scenarios, if PO specify with Quantity 1 and unit of measurement PC:
    1) Asset created without specifiying the quantity and unit of measurement
    2) Asset created with specifiying the quantity and unit of measurement, ie Quantity : 1, Unit of measurement: PC
    3)  Asset created with specifiying the quantity and wrong unit of measurement, ie Quantity : 1, Unit of measurement: Unit
    The result:
    Item1: No quantity and unit of measurement in Asset Master was updated.
    Item2: Quantity was added by 1, ie total is 2 in Asset Master
    Item3: No changed in Asset Master, since wrong unit of measurement.
    Is it bug for the item1 & Item2?
    Thanks

    Refer the note 421308
    Regards
    Sreenivas

  • SIS- Updating- Open Orders value and quantity not updated after delivery

    Dear Guru's
    in the SIS transaction MCTA
    when i create the sales order the values in the fields
    incoming sales ,sales,credit memo,open orders ,open orders etc
    are getting updated correctly
    but after creating the delivery,pgi and billing these values are not getting updated .like the reduce in the open order,open oerder qty they same as earlier afer creating sales order.
    if i cancel the order then the values are again updated accordingly
    can you please suggest me a solution for this problem,why this is happening of not geting updated after doing delivery and pgi
    waiting for the reply
    thanks in advance
    ramana

    Hi,
    Your query revolve's around LIS reporting. For any reporting, SAP recommended solution is SAP BI
    FYI SAP is not going to continue Support for LIS Based reporting.Developement on LIS based reporting is already stopped.
    Companies still use this tool to manage their reporting.
    Not all the key figures are updated by default. In your case you will have to carry out the enhancement.
    Please go through the following path:
    SPRO - Logistics General - Logistics Information System --- Check Help on Data Enhancement.
    Rgds

  • Purchase Order Item deleted; purchase requsition quantity not update

    Hello,
    We have PR-20025224 item 130 the quantity ordered is 200 on 2 PO 4200039509 and 4200083799 (100 each)
    One of the PO (4200083799) is deleted (No GR)so the quantity ordered should be 100 only in the purchase requisition u201CStatusu201D tab.
    Normally the program RM06HL04 should correct the quantity ordered but it does not.
    In the status tab in purchase requistion details are as below
    Proc Status:- B PO Created
    Block ID - Not Blocked
    Ord Qty - 200
                 - 05 Relese Completed
    Thanks to help me in this issue.

    Hello Jurgen,
    Thanks a lot for the reply.
    I checked the deleted PO, in "Delivery Schedule" tab at right end the last column is "PReq Closed" and it is blanked.
    Actually the client need is, once the PO deleted, in the purchase requistion "Status" tab "Ord Qty" gets changed (In this case it should reduce by 100 no from 200 nos, because other PO is for 100 nos)
    But PR Ord Qty does not changed.
    Is it possible that, the PR quantity gets changed once PO deleted?
    Thanks for the reply and hep.
    Hemant

  • Planned quantity not updated in the report.....

    Hi,
    We have created a production order and entered the qty as 10. After that partial confirmation is done and WIP calculated. Now during month end when we ran the report KKAQ, it is reflecting both Planned qty and GR qty as ZERO.
    Can anybody let me know how system updated the Plan qty and GR qty in KKAQ reprot. is there any OSS note which provide the more details on KKAQ report or is it link with confirmation/system status.....
    Does the plan Qty in KKAQ will update immediately after the Prodcution order creation......
    Please suggest......
    Regards,
    Sree......

    Hi
    In MC7F choose the info S025 and click on details
    There in System parameters remove the tick for "key figure restricted DB update:off" if selected.
    Probably this may be the reason for your Problem
    Regards
    Brahmaji

  • Quantity not updating in storage location

    Dear one and all,
    For a Sales order  and Delivery order , System has not reduced the entire qty from a storage location after making the invoice.  System reduced only part qty. The balance qty is still remaining in the storage location.
    Plz guide what all needs to be checked.
    Thanks & regards
    Sharad

    Dear GSL & Lakshmipati,
    Thanks for ur responses.
    One last question -
    I have an order wherein there are some physical items:
    - they are not value/text/service items
    - item cat/sch line cat automatically determined
    - sch line cat is relevant for deliv but not for MRP (no movement type defined) in customization
    - there Goods Movement Status is showing as complete (C)  in Delivery
    - there doc flow is showing as "confirmation of service"
    - all the items are completely delivered & invoiced
    - no batch split is occuring
    How will you keep track of such items (in storage loc.)? Why would you have such items?
    Thanks & regards
    Sharad

  • Open quantity in Sales Order did not update after cancelling Reserve Invoice

    Client created Credit Memo with reference to Reserve Invoice but this did not update the open quantity in Sales Order. Client is using SAP B1 8.82 PL9. I tested this in SAP 9.0 and still same behavior. Is there a work around other than creating another SO?
    I checked Document Settings and "Reopening Doc by creating credit memo based on Doc" is enabled.
    Thanks in advance.

    Thanks for the reply. How will the client be able to make new reserve invoices from the SO? They are trying to make partial reserve invoices from the sales order. I already suggested to just change the quantity in the reserve invoice before adding. But I have doubt because the SO might close prematurely before they complete the quantity in the SO because open quantity is much less then the quantity in SO.
    SO Quantity: 100
    Open Quantity: 40
    Reserve Invoice 1: 60
    Reserve Invoice 2: 40
    SO closes before they can make Reserve Invoice 2

  • Batch Split in OBD & billed for the entire Quantity .RG1  register does not update the excise values

    Hi All,
    I am new here . We have batch split in Delivery and 601 happens for the individual batches and billing we bill for the entire quantity . Hence the RG1 does not update the excise values for the batches and it is showing as zero (upon extraction in J2I6). Upon research through the program the latest note which i presume is patched
    The latest note is N158234 which does not show in the program but seems have been patched considering we are using the Latest version of SAP .
    As you see above in the billing we have billed for the whole quantity but RG1 does not update for the since the batches are zero .
    My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split .
    Now i have checked few other projects in my company and they all seems to be following the program . So i am wondering whether my process or some customization is missing .
    Sales order (no batch determination)  , in delivery the batches are picked through wm to and batch split happens in the delivery . Then billling for the whole quantity . We have automatic excise invoice creation enabled so no J1IIN .
    Can somebody help me .
    Thank you

    My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split
    Which field (H & J) they were referring in VBFA ?
    i have checked few other projects in my company and they all seems to be following the program
    How about the other projects' values in VBFA where your techinical team is guessing some issue.  Have you compared this?
    Since you have already the note 158234 implemented in your system, ideally, you should not face any issue.
    G. Lakshmipathi

  • Picked Quantity is not updated After delivery in Vl03n

    After delivey in Order (VA03), the picked quantity is not updated Properly(VL03n). It is coming as Zero.
    Is it any configurations needed or writng any code.
    For that I put Break point in FMs like SD_DELIVERY_UPDATE_PICKING in program RVADEK01.
    But it is not stopping the Program.
    Please give any possible solution.

    Hi Vinod,
    Thank u For ur Answer.
    Just my Fuctional Consultant given Procedure.
    How to test the picking list. The problem is after Deliver  the Order quantity in VA03 and after saving, this will creates One Out Bound delivery.
    Now We r checking VL03n. Now it is updating the Picked Quantity Correctly, For that We r using the Standard Print program: RVADEK01, Form: RVPICSKSIN.
    Output Type: EK00, Application: V4.
    Here My problem is We copied the Form and print Program and modified according to our requirement and they configured in Nace with our own Output type.  We haven't chenged the updated Functionality and Not even Standard program. We wrote some include program for getting new values in scripts.
    Now the picked quantity is not updated after picking in VL03n.

  • Quantity column is not updating in YR02 report

    Dear Experts,
    While doing download the asset data into excel through t.code YR02 the field quantity is not updating. If i checked in asset master data, there i am getting asset quantity 1 for each asset but in YR02 report i am not getting.
    Please help me to resolve this issue.
    Thanks,
    Anjiee
    Edited by: anjiee on Mar 21, 2011 12:47 PM

    Transaction YR02 is in customer namerange and hence it is not a standard functionality of the system .
    Hence whenever you are quoting any queries then you will have to also provide the Y programme that you have created for the purpose .
    I mean to say the coding of the programme to comment further .
    Cheers ,
    Dewang

Maybe you are looking for