Query data not displayed
Hi Experts,
I have trasported the standard report from DEV to production.
The query(report) works fine in development and is built on multiprovider, so when i check in production the query say no data found.
What would be the solution?
can i re-import the query(Only query) again to production?When i cheked
Edited by: Bharath Kumar on Dec 3, 2008 12:10 PM
Hi,
First check the data in multi provider level in production, means apply all the restrictions on multi provider while displaying the data of MP, which are used in filters and restricted key figure in the query.
See whether the data is available or not. I think the data which satisfy the restrictions is not available in the MP.
Ravi
Similar Messages
-
Adhoc Query data not getting displayed on Portal
Hi,
I have a problem with custom Adhoc query data not getting displayed on the portal.
It was getting displayed initially but after a user made some changes to the query its not getting displayed.
The query is displaying data perfectly on R/3 but on portal ..Its giving the message no data found.
Can anyone help me on this.
Also if anyone can tell me how do i debug an Adhoc query from potal.
Is there any tool to debug an Abap program from portal.
I dont want to use trace,
Thanks
GT
Message was edited by: GTHi GT
find out the EXACT query u want to launch if it's display
in BW buisness explorer then change the iview property
for that query in portal . right click on iview
BEx Web Application Query String -> assign correct query
regards,
kaushal -
Time dependent Hirerachy data not display at query level
Hi all,
I have loaded a time dependent hirerachy from flatfile,it showing same data as in flat file at RSMO,where as if I am executing query ,report displaying in hirerachy structure format,but DATE-TO and DATE-FROM are not displaying .
Ex:On ZEMPLYOE i have created ZMANAGER as hirerachy,report giving ZMANAGER&ZEMPLOYEE details correctly in hirerachical format,but Date-to and Date-from are not displaying at report level,where as entair data is loaded to ZEMPLOYE without any error.
If any one has come across the same situation,what are additional steps need to have take.
your help will be appreciated
Regards,
Praveena.Yes, date-from and date-to are not meant to be displayed in the report.
Let me take an example to tell the purpose.
Suppose your hierarchy displays employees managerwise.
If you create hierarchy telling
from 01-01-2009 to 31-03-2009, employee E1 will report to Manager M1
from 01-04-2009 to 31-05-2009 , E1 will report to M2.
then, until March, E1 will be displayed under M1 node in the report, and in April and May, he will be displayed under M2 node.
So, we create hierarchy only once, but they change in the report depending on the month.
Hope this helps. -
Data not displayed for Key Figure of MultiProvider
Hi Folks,
I have created a Query on MultiProvider which is actually copied from another Query(based on InfoCube) using RSZC. Now I have the problem with display of data for a KeyFigure in report. No data is displayed for the KeyFigure. The MultiProvider has Two InfoCubes where the KeyFigure is related to one of the two Cubes. The data is shown at the MultiProvider level. I have also checked for a new query on the same MultiProvider. Here too the data is shown in the report for the KeyFigure. But it's not showing in the Query which is copied from another.
Any assistance on the same is really appreciated.
Thanks,
Raju. DupadallyHi Diaz,
Thanks for your answer. Could you make it understandable. I haven't understood fully.
Thanks,
Raju. D -
Data not displaying the report (Help me out Urgent)
Hi Folks,
When i am executing the query and web reports for the date 27/11/2007 & 28/11/2007 am not getting the data its saying "No applicable data found"
But i can see the data in the ODS for those dates.
Report is working fine till 26/11/2007.
But when the user is trying to check the reports for the above mentioned dates its not displaying.
Even in checked it the RSRT as well but the same case over there the data is not displaying.
Its bit urgent as its month end user wants to see the reports.
Any help or any clue will be great helpfull and appreciated.
Urs,
RK
*****Points CommittedHI Suchitra,
<i>First check out how many records are there in the ODS as on 27th and 28th</i>
There are totally 750 & 427 records on 27th and 28th.
<i>At the time of executing the query,are using giving any variable entries?</i>
Yes we are using variables entires like PO Date & PO number we usually check the reports giving the date in PO Date variable,
Any other clue please?
Urs,
RK. -
Hi,
we have an issue where date is not displaying correctly in report. it shows 1/1/1990. even in universe it shows the same value 1/1/1990. but if i run query at DB level it shows the correct date. Reporting Database is Sybase.
we are on Bi 4.0 SP 6.
Any Ideas.
Thanks,
Yogesh.HI Farzana,
Finally,i have narrowed down the issue. So here it is,Initially we were seeing date as 1/1/1900 in webi rich, IDT and BI LaunchPad. so than we have made changes to sybase. prm file in following location
........\dataAccess\connectionServer\sybase\extensions\legacy
in prm file the input date parameter is as below
<Parameter Name="USER_INPUT_DATE_FORMAT">'mm/dd/yyyy hh:m:s am/pm'</Parameter>
we changed it to
<Parameter Name="USER_INPUT_DATE_FORMAT">'mm/dd/yyyy hh:mm:ss A'</Parameter>
and than we see correct date in IDT and Webi rich but not in BI LaunchPad. the connection we were using in universe is ODBC. so i have created a new connection using sybase CTL client and now i see correct dates in BI LaunchPad also. So i am not sure if i need to make changes to prm file in /dataAccess\connectionServer\odbc\extensions location for the report to show correct values using ODBC.
Any Idea.
Thanks,
Kumar. -
Hierarchy node variable - successor node data not displayed
Hello,
I have a query with a hierarchy in the rows section. This hierarchy is restricted by a hierarchy node variable with the following settings: variable type hierarchy node; customer exit; single value; mandatory; not ready for input; cannot be changed in query navigation.
The customer exit correctly supplies the node. However, only data for THIS node is displayed in the query results. And data for successor/underlying nodes is NOT displayed.
I tried several things, including:
- rightclick Rows > Display as a Hierarchy
- customer exit variable: multiple values instead of single value; optional instead of mandatory
In the Hierarchy Attributes for the hierarchy, nothing is checkmarked, except for Root/Totals Item Appears Above and Drilldown start level = 00. The hierarchy and its nodes are valid from 01.07.2005 to 31.12.9999.
I have a feeling in what area the solution can be found, but I have no clue what to do further on with it. As a test I replaced the customer exit variable with a user entry variable. If I then execute the query, I can select either the node or the value (both with the same technical value!). If I select the node, I get all data, including data for successor nodes. If I select the value, I only get the data for the node, not the underlying successor nodes. For some reason, the customer exit variable behaves like the latter and not like the first. I do not know how to solve this.
I would greatly appreciate if you could help me out of this issue here.
Kind regards,
FrankHi,
no, it doesn't. It just returns the data for the node and not for the underlying nodes.
Frank -
Query Description not displaying in Bex Template
Hi all,
I have created a Template in Bex Analyser in the Design mode of a Workbook. I have assigned this workbook template as the Default Template for all the Queries by selecting it in Global Settings. I closed this workbook template and opened a query. I am getting the template embedded in the query as i designed but the problem is the Query Description is not displaying correctly. In the Query, it is showing the Workbook Description in the header instead of Query Description.
Where should i change it? Help me in fixing this. Thanks.
Regards,
MuraliHi,
you should use an Info Field WebItem to display the query name or description in your Webtemplate.
Parameter in InfoField: General Text Elements for a Data Provider (GENERIC_TEXT_ELEMENT).
You use this parameter to choose the generic text element that is to be displayed:
● Query Name (QUERY)
● Query Description (QUERY_DESCRIPTION)
http://help.sap.com/saphelp_nw04s/helpdata/en/47/96784226d1d242e10000000a1550b0/frameset.htm
Regards
Andreas -
Text File Data not Displaying completely
Hi All,
Have one issue. The program correctly extracts the data & export to Excel. All column /field data's are dispalying.However while saving this data in a text file in Aplications server file path, though all column/ field data are extracting bit it is not displaying complete column/field data's i.e last 3 or 4 column data's are not displaying after 257 character space (but actually it extracts data.It is just not dispalying while i am checking text file via AL11).
What could be the reason of not dipslaying the all column/filed values in text file wherea as while exporting to excel it is displaying? is there any character length constraint for text file?
Thanks>
Debabrata wrote:
> What could be the reason of not dipslaying the all column/filed values in text file wherea as while exporting to excel it is displaying? is there any character length constraint for text file?
There is no restriction on the file size which you can upload on the app server. AL11 is nothing but a report program & there is a limitation on the max number of characters displayed on the page.
BR,
Suhas -
Problem with data not displaying in website
Hello All,
I am having a problem with one of our applications. It is written in ColdFusion and uses SQL server. The problem that we are having is when we use the URL Http://bma.com (that is not actually the site name) we cannot see all the data that it is suppose to pull in. I get an error on page and when I select to view the error this is what I get
Message: 'WddxRecordset' is undefined Line: 184 Char: 2 Code: 0 URI: http://bma.com/user_maintenance.cfm and Message: 'jsusersTLV' is undefined Line: 3208 Char: 6 Code: 0 URI: http://bma.com/user_maintenance.cfm
If I put the IP address in the URL for example http://165.83.109.246/bma/login.cfm all of the data is displayed as it should.
Any thoughts or sugguestios on how to correct this?
ThanksYes, the user_maintenance.cfm is one of the forms that the data is not displaying on. There are multiple forms in the application and that just happens to be one of them. the login.cfm is just the login screen. Once you select your name and enter your password to the application then you can select the user maintenance form. If you select someones name the application should pull in all of that persons information. That is the problem, it is not pulling in any information on the user. We get a blank screen where data should be. When we use the IP address in the URL and select someones name in the user manintenance form, it pulls in all the data from that user as it should.
-
Data not display in background layout
Hi Expert,
This is regarding screen layout.
FBL3N report.... I have create new layout for report FBL3N. when i run the report in foeground all data display in proper layout.
But when i run this report in Background two fields are not display in layout.
Please suggest me whern i do the changes....
Regards
PK.I think you should change the forum if you are asking Finance module related qwuestions.
-
Please show this query, data not showing why?
I created a report and write following query,it was working well since last 4 months but today automaticly not showing data I can undertstand why?
Becuase I didnt make any changes in this query.
Please help me
Urgent
SELECT ALL MERCH_ORDER.ORDERNO, MERCH_ORDER.ORDERDATE, MERCH_ORDER.SHIP_DATE, MERCH_ORDER.PONO,
MERCH_ORDER.SUBPP, MERCH_ORDER.PJNO, BUYER.B_NAME, BUYER.B_AJENT,
MERCH_ORDER.ITEM, MERCH_ORDER.FABRIC, MERCH_ORDER.QUALITY, MERCH_ORDER.COMPOSITION,
MERCH_ORDER.P_SIZE, MERCH_ORDER.QUANTITY, MERCH_ORDER.Q_UNIT,
MERCH_ORDER.NETWHT, MERCH_ORDER.WT_UNIT, MERCH_ORDER.TERM, MERCH_ORDER.COMM,
MERCH_ORDER.PRICE, MERCH_ORDER.CUR_SYMB, MERCH_ORDER.STATUS, MERCH_ORDER.REMARKS,
MERCH_ORDER.WONO, MERCH_ORDER.PRONO, MERCH_ORDER.PES_QUANTITY,
MERCH_ORDER.PES_Q_UNIT, MERCH_ORDER.PES_PRICE, MERCH_ORDER.PES_CUR_SYMB
FROM BUYER, MERCH_ORDER
WHERE MERCH_ORDER.CANCEL IS NULL
AND (MERCH_ORDER.B_CODE = BUYER.B_CODE)
and merch_order.orderno not in
(select export_order1.orderno from export_order1)
ORDER BY MERCH_ORDER.ORDERNO
there is no any error and msg header and footer print.Maybe , the query in "NOT IN" clause select export_order1.orderno from export_order1
return the same rows as the following portion return....
SELECT ALL MERCH_ORDER.ORDERNO, MERCH_ORDER.ORDERDATE, MERCH_ORDER.SHIP_DATE, MERCH_ORDER.PONO,
MERCH_ORDER.SUBPP, MERCH_ORDER.PJNO, BUYER.B_NAME, BUYER.B_AJENT,
MERCH_ORDER.ITEM, MERCH_ORDER.FABRIC, MERCH_ORDER.QUALITY, MERCH_ORDER.COMPOSITION,
MERCH_ORDER.P_SIZE, MERCH_ORDER.QUANTITY, MERCH_ORDER.Q_UNIT,
MERCH_ORDER.NETWHT, MERCH_ORDER.WT_UNIT, MERCH_ORDER.TERM, MERCH_ORDER.COMM,
MERCH_ORDER.PRICE, MERCH_ORDER.CUR_SYMB, MERCH_ORDER.STATUS, MERCH_ORDER.REMARKS,
MERCH_ORDER.WONO, MERCH_ORDER.PRONO, MERCH_ORDER.PES_QUANTITY,
MERCH_ORDER.PES_Q_UNIT, MERCH_ORDER.PES_PRICE, MERCH_ORDER.PES_CUR_SYMB
FROM BUYER, MERCH_ORDER
WHERE MERCH_ORDER.CANCEL IS NULL
AND (MERCH_ORDER.B_CODE = BUYER.B_CODE)
OR
there are no rows which conform to the joining condition between the two tables BUYER and MERCH_ORDER ....
Regards,
Simon -
Data not display in BAM Dataobject through sensor in Bpel process.
Hi,
I am trying to integrate BAM with BPEL process in oracle 11g. I have created BAM Activity and variable sensor
in BPEL process but when i run my BPEL process then no data is display in BAM corrsponding to it. Error is coming at backend "not able to invoke writeToBAM operation in BAM Adapter".
Also this error is coming at SOA server console:
Exception: BINDING.JCA-12563
Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'writetoBAM' failed due to: javax.security.auth.login.LoginException: [Security:090304]Authentication Failed: User javax.security.auth.login.LoginException: [Security:090301]Password Not Supplied".
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution
Thanks in AdvanceHi,
I am trying to integrate BAM with BPEL process in oracle 11g. I have created BAM Activity and variable sensor
in BPEL process but when i run my BPEL process then no data is display in BAM corrsponding to it. Error is coming at backend "not able to invoke writeToBAM operation in BAM Adapter".
Also this error is coming at SOA server console:
Exception: BINDING.JCA-12563
Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'writetoBAM' failed due to: javax.security.auth.login.LoginException: [Security:090304]Authentication Failed: User javax.security.auth.login.LoginException: [Security:090301]Password Not Supplied".
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution
Thanks in Advance -
Expiration date not displaying after upgrade from 2007 to 2013
I recently upgraded from MOSS 2007 to 2013. I have information management set up on a library of InfoPath forms. For the forms that were created prior to the upgrade, the expiration date is displaying and actually get updated if I modify them.
But none of my forms that have been created after the upgrade, are displaying when the expiration date is, which should be one year from modify date. If I modify the forms created prior to the upgrade, they reflect the new, update date.
Are these new forms not getting the policy applied to them, and why not? I am not sure why the older forms are getting updated, but not my new ones.
Denise E.Hi Denise,
According to your description, my understanding is that the Expiration date column was not displaying values after upgrading from SharePoint 2007 to SharePoint 2013.
Per my knowledge, we can only use the date column which is added to the library or list or the Declared Recorded date to set the retention policy, so if the Expiration date is used in the retention policy then the Expiration date should be a column in the
library or list.
I recommend to check the retention policy in the library and see which column is used in the retention policy as the image below shows:
After that, go to the Library settings to find this column.
Could you please provide screenshots of the retention policy and the columns in the Library settings page?
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
Mod date not displaying in Files panel Dreamweaver CC
After upgrading to Dreamweaver CC, on OS X Mtn Lion, my Files pane will not display the Modification Date for both local and remote files. The column is there, but it's blank. I have tried hiding and showing that column in the Sites setup, but that did not work. Any ideas?
I can confirm that the solution posted by crockej does indeed work, I am not by any means saying that it is a perfect solution, and am sure that it is not the actual fix, but it does work, I landed up having to add JPG,GIF,PNG,PDF,SWF,FLA,ICO,SWZ,MPR,PSD,XLSX,INDD,AI all to fy file list and although this was 90% of the missing icons fixed, it still requires more like m4v etc.
Think of this as more of a temporary solution to the problem, but it does work.
This is what my /Users/XXXXX/Library/Application Support/Adobe/Dreamweaver CS5.5/en_US/Configuration/Extensions.txt file looks like now.
HTM,HTML,SHTM,SHTML,HTA,HTC,XHTML,STM,SSI,JS,JSON,AS,ASC,ASR,XML,XSL,XSD,DTD,XSLT,RSS,RDF, LBI,DWT,ASP,ASA,ASPX,ASCX,ASMX,CONFIG,CS,CSS,CFM,CFML,CFC,TLD,TXT,PHP,PHP3,PHP4,PHP5,PHP-D IST,PHTML,JSP,WML,TPL,LASSO,JSF,VB,VBS,VTM,VTML,INC,SQL,JAVA,EDML,MASTER,INFO,INSTALL,THEM E,CONFIG,MODULE,PROFILE,ENGINE,SVG,JPG,GIF,PNG,PDF,SWF,FLA,ICO,SWZ,MPR,PSD,XLSX,INDD,AI:Al l Documents
HTM,HTML,HTA,HTC,XHTML:HTML Documents
SHTM,SHTML,STM,SSI,INC:Server-Side Includes
JS,JSON:JavaScript Documents
XML,DTD,XSD,XSL,XSLT,RSS,RDF:XML Files
LBI:Library Files
DWT:Template Files
CSS:Style Sheets
ASP,ASA:Active Server Pages
ASPX,ASCX,ASMX,CS,VB,CONFIG,MASTER:Active Server Plus Pages
CFM,CFML,CFC:ColdFusion Templates
AS:ActionScript Files
ASC:ActionScript Communication Files
ASR:ActionScript Remote Files
TXT:Text Files
PHP,PHP3,PHP4,PHP5,TPL,PHP-DIST,PHTML:PHP Files
LASSO:Lasso Files
JSP,JST:Java Server Pages
JSF:Fireworks Script
TLD:Tag Library Descriptor Files
JAVA:Java Files
SQL:SQL Files
ASX:Windows Media Advanced Stream Redirector
WML:WML Files
EDML:EDML Files
VBS:VBScript Files
VTM,VTML:VTML Files
SVG:Scalable Vector Graphics Files
Thanks to crockej for finding this semi solution for now.
Looking for Knysna Accommodation?
Maybe you are looking for
-
Assigning Manufacturer while creating a batch from COR1 or MIGO etc.
Hi Gurus, I am creating a new batch while creating a process order using COR1 or MIGO. When i click on the NEW button, the batch is automatically created and we get a new batch number. Now at this time of creation of a new batch, i want to assign som
-
Java API for working with digital signature.
Hi, I have to check whether a pdf form is modified since it is digitally signed, using a java program. Are there any java APIs(provided by SAP) available for that? Can I use IWDPDFDocument API in java program? I tried it but I am getti
-
Problem with reading file:// hyperlinks.
Hello all, Version of Reader: 10.1.3 I have a pdf document with some hyperlinks to a file:// locations (locations to other pdfs on hard disk). While clicking into that file:// location, I have got the message: " Security Warning. This document is try
-
hi I got two tables BOOK (DDC,TITLE,ISBN,AUTH_NAME) AUTHOR (DDC,AUTH_NAME) Table "BOOK" contains about 50000 records but its AUTH_NAME column contains NULL for all 50000 records. I want insert AUTH_NAME column's values from AUTHOR table into BOOK's A
-
Problems with File Sharing.... prev query unanswered
Hello everyone, I posted this query last month and have yet to solve the problem. I was hoping for some fresh ideas. I am running a network on an OS X Server between three labs (around 50 computers connected). One lab has 3 IBMs running with Windows