Question on MDM 2.1 security.

Hi All,
We are trying to configure MDM 2.1 for our project and we have a question about security.
One of our goal is to flter data according to a particular user. For instance, we have a group of users that will be able to see only their own data (so their own interval data, MC, etc). So we need to filter data at the database level.
Do you know if it is possible to do this in MDM 2.1 ?
Many thanks.

It sounds like you're attempting to pass Local EJB objects over a Remote interface, which is not permitted. EJBLocalObjects can not be passed outside the ejb tier. You'll need to either pull their data out into data access object classes (basically structs) or return EJBObjects.
--ken                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

Similar Messages

  • I've had this iPad computer thing for a few months now. I used to just put in my password when I downloaded an app or such like. Now it wants me to set up 4 further questions and answers "for added security". How can I return to the old system?

    I've had this iPad thing for a few months. It used to just ask me for my password, but now it is demanding I set up four questions and answers for
    "added security". I don't want to do that, I just want to carry on as I was but the machine is preventing any app downloads etc.
    Seems the stupid machine is in control.
    How do I get it to listen when I threaten it with a good thrashing and a one way trip to the garbage unless it does what I say?
    Thanks

    Chick3597 wrote:
    Regardless of apple updating something or another. I have no need for the additional questions and really don't want to allow them to bully me into compliance.
    You may have no need for additional but Apple does. They don't want your iTunes account to be hacked and then go complaining to them that their security procedures are not up to standards.
    Chick3597 wrote:
    So how can I continue in the good old fashioned way?
    Its really absurd to even ask this in light of the information that you have been given already. The "old fashioned" way is gone. It's Apple's store, Apples's rules and IMO - its a wise decision on Apple's part.
    You do not have to comply at all, but you will not be able to purchase from iTunes anymore, but nobody is going to force you to do something that you do not want to do.

  • HT5312 How to change my security question because I forget my security question

    How to change my security question because I forget my security question

     Account Security Team (AST) 
    Check the AppleCare number for your country here:
    http://support.apple.com/kb/HE131
    Call them up, and let them know you would like to be transferred to the Account Security Team.
    Or… click on the blue "Start your support request online" links.

  • HT2731 I was ask for my secure question and they did not work. So I went into my account and tap on my secure question that I forgot my secure question. It replied back that it just sent me a email. The email never came. I did this three time. My email is

    I was ask for my secure question and they did not work. So I went into my account and tap on my secure question that I forgot my secure question. It replied back that it just sent me a email. The email never came. I did this three time. You have myy email as correct. I have check my account and it show as being correct.

    It's a really bad idea to post your email addresess - it's an invitation to spam - and I've asked the Hosts to remove them.
    This is a user-to-user forum and no-one on here can take any direct action. If your Yahoo address is not working that's something you would need to take up with Yahoo - have you checked it by sending yourself an email to it?
    Otherwise you will need to contact Support: go to https://expresslane.apple.com/ and click on 'iTunes' in the center column and then 'iTunes Store' in the right-hand column and proceed from there.

  • HT5312 How do I change the questions and answers to my security questions???????? I'm stuck! Help!

    Does anyone know how to change the questions and answers on your security questions?

    You need to contact Apple, either through the link in that article or by phoning them.
    (77160)

  • I am trying to buy song but it is asking for me to answer the questions I chosen for my security but I have forgotten so what do I do

    I am trying to buy song but it is asking for me to answer the questions I chosen for my security but I have forgotten so what do I do

    If you have a rescue email address (which is not the same thing as an alternate email address) on your account then the steps on this page will give you a reset link on your account : http://support.apple.com/kb/HT6170
    If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset (and if you don't already have a rescue email address) you can then use the steps on this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5620

  • Hello there i just have 1 question, i have forgotten my security answers to the questions? what can i do? cause i just bought a new ipad and it wont let me access itunes without those 2 answers? please help

    hello there i just have 1 question, i have forgotten my security answers to the login questions how do i reset/change these, so atm i cannot get into the itunes store on my new ipad2?

    Hi sjs1983! You can get support for your Apple ID here:
    http://www.apple.com/support/appleid/

  • I changed my rescue email to change my security questionsi but when i go to send the email to change my security questions, it says to send security info email to the email address i previously had as my primary email address

    I want to change the password for my itunes account but I don't remember my security questions. I changed my primary address to my new email and changed my rescue email address to another new email address. When I go to change my security questions it says Send reset security info email to j•••••@y7mail.comwhich is my old email address. I don't know the password to this email address that's why I changed the rescue email to a new one. But on the name, ID and email address page it has both updated emails on there

    You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
    (124982)

  • HT5312 I want buy Apps but need security questions,i forgot security questions and i forg reset security info email address. how can i do.  I know my ID and passworld

    I want buy Apps but need security questions,i forgot security questions and i forg reset security info email address. how can i do.  I know my ID and passworld
    i cant rember questions and my reset security info email(address and passworld)
    How can i do? i want buy apps but need ask this questions.......

    Welcome to the Apple Community.
    Start here (change country if necessary) and navigate to 'Password and Security', reset your security questions using the link provided, you will receive an email to your rescue address, use the link in the email and reset your security questions.
    If that doesn't help, you don't receive a reset email or you don't have a rescue address, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
    If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support.

  • HT5312 good day ) i have question ) how can i reset my security question can i reset my security questions... because i forgot them...

    good day ) i have question ) how can i reset my security question can i reset my security questions... because i forgot them...

    Your profile says you have Mavericks, is that true?  yes
    Do you have an Apple logo in the top left corner of your screen? yes
    When you click on it, do you have an App Store option in the drop down menu? yes
    i have no this blue sentence...

  • HT1918 Forgot answers to security questions, how do I reset security questions?

    Forgot answers to security questions, how do I reset security questions?

    At the bottom of the article that Niel linked to :
    If you decide not to provide a rescue email address, you can't reset your security questions and answers yourself later in the event you can't remember the answers to your questions. You'll need to contact iTunes Store support to have your questions and answers reset.
    e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then try Apple ID Account Security
    or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57

  • HT5312 I forgot security questions and answers.  Now security section has been locked.

    I have not used my I tunes card.  I forgot my security questions and answers.  Now security section of my apple account has been locked.  How can I use my card?

    If you've disabled your account then you might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
    You might then need to log out of your account on your iPad by tapping on your id in Settings > iTunes & App Store and then log back in so as to 'refresh' the account on it
    For your security questions, the HT5312 page that you posted from has instructions for how to reset them i.e. if you have a rescue email address (which is not the same thing as an alternate email address) on your account then steps 1 to 5 half-way down that page should give you a reset link.
    If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699 (you can also try this link if you can't get your account enabled via the above)
    When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

  • Some important questions on MDM functionality

    Hello All,
    I have some basic/imp questions to be understood on MDM 7.1 for a data consolidation project.
    1) When importing records in import manager, some of the records are failed with this error message "Import failed. Unable to find value map index". When checked the records in excel source, those records are having one or two fields carrying some square like char, ? and some non readable char (chinese, japanese). SAP is the source and SAP CRM has those characters successfully maintained in the system but MDM has some issue. How do we tackle these in MDM to successfully import those records?
    2) How do we archive a repository to create a new one which needs to have empty records in main table but need to carry look up table records?
    3) There are some records attached to workflow and when deleted those records from data manager, system throwing error "attached to workflow". Can anyone help me how to remove this attachment and delete those records?
    4)  The max number of records which can be imported at one shot in import manager is 100K? What happens when we exceed this records let's say 200K? Does the process go infinite loop? Is there a way out to import more than 100K records at one shot?
    5) What are the different types of data consolidation projects MDM Gurus encounter? Elaborate please.
    6) How many clients use Hierarchy, taxonomy, family tables for repository design? Is it very common or rare? And what would be some of the reference  use cases (articles) I could find in sdn blogs for these?
    Thx and appreciate for responding to these and also please let me know if any additional articles around MDM which are very popular and must see for a MDM consultant.
    -Mike

    1) When importing records in import manager, some of the records are failed with this error message "Import failed. Unable to find value map index". When checked the records in excel source, those records are having one or two fields carrying some square like char, ? and some non readable char (chinese, japanese). SAP is the source and SAP CRM has those characters successfully maintained in the system but MDM has some issue. How do we tackle these in MDM to successfully import those records?
    Thats a known issue in MDM 5.5 but i am not sure about the current 7.1 SP08 release it might by fixed too, MDM Import manager does not support some special characters,only solution is to identify those records which has special characters in excel and exclude them from the load, may by unmapping the field which has special characters and load the other fields data using the map. and then login to Data manager and copy the text to the corresponding record  manually.
    2) How do we archive a repository to create a new one which needs to have empty records in main table but need to carry look up table records?
    We can not create a repository from an archive with out main table data automatically. you need to clean the main table manually or by using an import map we can delete the data.
    Check the below link for deleting data from a main table through import manager:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0245870-0adf-2b10-46a8-ca9dcf8e1a4d?QuickLink=index&overridelayout=true
    3) There are some records attached to workflow and when deleted those records from data manager, system throwing error "attached to workflow". Can anyone help me how to remove this attachment and delete those records?
    Click on workflows tab in data manager and you can find in which workflow the record is and check the history by right clicking on the record. if you have rights to stop the workflow do that , or else login with the workflow owner and stop the workflow so that record will come out of the workflow and will be able to be delete that record.
    4) The max number of records which can be imported at one shot in import manager is 100K? What happens when we exceed this records let's say 200K? Does the process go infinite loop? Is there a way out to import more than 100K records at one shot?
    Importing 100K data in one shot is not a good idea, and the system will go in infinte loop. you need to split the source files in to multiple chunks. chunk size in your system will be set in MDS.INI file, talk to your MDM Basis guy he will help you in getting details of those..
    5) What are the different types of data consolidation projects MDM Gurus encounter? Elaborate please.
    Let us know which kind of consolidation project you are working in, Tricks will be based on the particular requirement
    6) How many clients use Hierarchy, taxonomy, family tables for repository design? Is it very common or rare? And what would be some of the reference use cases (articles) I could find in sdn blogs for these?
    Again for this question it will be based on the requirements... i am sure you will be able to find blogs how to use hierarchies,taxanomies and family tables but not the client names...
    Hope i answered your questions.
    regards
    Sowseel

  • Few questions on MDM

    Hi,
    Iam new in MDM have some questions can anyone do clarify the same,
    1.     How the User can validate the records before importing to import manager. We need to have a list of items which are skipped or created other than summary. Now we have only summary?
    2.     How to identify from which client the data is getting imported?
    3.     Is there an option of merging fields in batch?
    4.     How to trace which data is merged? Is it legacy or R/3?
    5.     How does user
    Thanks,
    Suresh

    Hi, Suresh,
    2. When you launch Import Manger you specify Remote System that you import data from. Also if table you are importing into has 'Key mapping' enabled, then you can map remote key and as a result you will find that just uploaded records have entries in key mapping table that point to the local system you imported data from.
    3. If you mean merging records (not fields) in batch then you can do it when you import records by defining Matching Fields at Matching Records tab of Import Manager. This fields or field combinations will be used to identify records to be merged.
    If for example there are 2 incoming records and 1 record in repository table with same value of field "ID" chosen as Matching Field, then finally you will get only 1 record, merged of these 3 records.
    Regards,
    Vadim Kalabin

  • I have a question about my Apple ID security questions that I don't remember?

    Alright, so I don't know my security question answers. However i can buy things from the app store/whatever, i just want to know them. Because when I go to "Manage my apple ID" and i log in and go to the Password and Security section of it, thats where it asks me for my answers to the security questions. So, for future reference if i need go change something on my apple ID in terms of Password/Security I need to know my security questions answers. Thats why i want to know them, even though it isn't a problem right now.
    So with that said, I know i have to call apple support to reset my security questions because i do not have a rescue email with the security questions, and the link of course doesn't show up under where its supposed to be.
    So my point is, i was wondering if when i call apple support to ask about this (i already set it up for me to call them when I'm ready) if I'm gonna get charged money for calling them just so they can reset my security questions? Or is this free to do? Since its just security questions issue again? If i have to pay to talk to them i won't do it. I only want to know them again cause last time i reset them my dad called, i think, anyways i don't remember them and i doubt my dad will remember the answers. We might have wrote it down but i don't know where that paper is now. Thank you.

    Well crafted story = kudos, but try this User Tip FIRST
    Some Solutions for Resetting Forgotten Security Questions
        ÇÇÇ

Maybe you are looking for