Quotation and hierarchies of material

Helow.
I would like you to ask you about quotations and hierarchy of material.
First of all, if you create a quotation you can add for each line of material different quantities. Later, you can see by adding either the sales orders or on different reports if you are about to complete the quotation.
The problem I have is that if you created a quotation without lines and later you create condition record (Z004) that takes into account the quotation by the following route: 957 Sales Org/Customer/ReferenceDoc/JP1/JP2/JP3/JP4/JP5/JP6/Mat you lost the traceability of quantities referred to the quotation. On the sales order, you get the discount if the material has the hierarchy.
So, I would like to know if it is possible, somehow, to add the quantity of the quotation for hierarchy and get a report that shows the quantity in the quotations and the quantity sells in orders refered to the quotation.
Thanks in advance.

Hello Ambrish,
please check the information given in note 675101.
Regards, Gerhard

Similar Messages

Automatic material reservation when we save Quotation and Order

when we save Quotation and Sales order, automatic material resrvation should happen.After 3 days the material should automatically move to unrestricted stock.
Thanks
Anushaka

hi,
are you using MTO or MTS.
if its an MTO process goods will be posted against sales order itself.
if you are using MTS then its a development.
balajiaa

Replication of quotation and order from CRM to ECC

Hi experts,
We are trying to replicate a quotation and order created in CRM to ECC. We have maintained the same transaction types and item categories in both ECC and CRM. Is there anything else that is required to be done for proper replication??
Now while trying to replicate, we are getting this error: "Partners from account group 0005 are not permitted for partner function BP (Notification E VPD 000)"
How to solve this??
Please Guide.
Regards
Aakshi Suri

We maintained Partners from account group 0005 for partner function BP. Now we are again getting these errors:
u2022     Account Assigment Object Successfully Assigned to Item 0000000010 (Notification S C( 312)
u2022     SALES_HEADER_IN has been processed successfully (Notification S V4 233)
u2022     The sales document is not yet complete: Edit data (Notification W V1 555)
u2022     Sales document 0005000080 was not changed (Notification E V4 219)
u2022     Status "Obsolete status" of material 101123900 does not allow external procurement (Notification E ME 053)
u2022     Error in SALES_ITEM_IN 000010 (Notification E V4 248)
Is there any place where we can check the notifications??
Kindly help us in resolving this error.
Regards
Aakshi

Doubt In Quotation and Inquiry

Hi all,
I have a little doubt with regard to quotation and inquiry. Can anybody please explain whether we have pricing in inquiry? in other words does an inquiry document include pricing?
As far as my understanding goes an inquiry is generated by a customer and it should not have pricing for if he would have had the price and the material then what is the purpose of inquiry, he can directly place an order for the material. according to me inquiry is just a request for quotation and just has a need for a material. This inquiry should be followed by a quotation which has the materials qty, the price at which it is available and by when it will be available. After the customer agrees to the price and the conditions in the quotations he places the order.
please correct me if i'm wrong.
Regards
Deepak

Hi Deepak
When customer enquires about some of your product, we create a document for this , means creating an electronic document for it by entering the data for which customer is seeking information.
This document is called Inquiry and it has Pricing data.
With reference to this enquiry we give a Quotation to the customer.Quotation is created in that Sales area where Inquiry is created.
That means , Quotation is from the organisation to the customer from a specific sales area.It is legally binding.
Both Inquiry and Quotation contains Price.
In some industry before creating Quotation they create an Inquiry, as they keep a record of Inquiries for future analysis purpose, beacuse customer has suppose enquired for 5 items but ultimately placed order for 2 items after quotation is given.
He might have refused due high price etc, but he was interested for it that is why he had enquired. So in future, if the price is reduced or new feature is added then he may be contacted.
This is more useful for the Presales department.

Quotation and Contract

Dear all
This is one of the migration of all the quotations and contracts download and upload from SAP to SAP...we are using Std BAPI...what are the field should i consider...
like old document number and header details like customer and item details like material and price we are taking old price from old system...
and what are all the other things which we need to consider... please help me on this
Regards

Hi ravi,
you would need to ensure the following things
1) the sales area must be defined
2) pricing procedure should match
3) if you are copying the quaotation nos then the no range should also exist
4) quotation with the same no should not preexist in the new system
5) it is advisable to have all the master data copied otherwise sometimes it leads to errors
Hope this helps
Thanks
Prashant

MTO quotation and amended quotation

Hi All
Theres a requirement in my project whereby the client needs the customizable material in an MTO scenario to be a temporary one initially (since material master is not maintained for this new material. and this is created by sales guy at point of sale with appropriate description) during the inquiry and quotation level. When the order is confirmed there should be an amended quotation whereby the actual material is created and replaces the temporarily created material. Please advise how to go about with this
Thanks
Tejas

Hello Deepak;
I never did it before, but in the standard way we can't.
You can treati with any user-exit and insert the document reference at table VBFA (document flow).
Or for instance, you can just insert the inquiry number at Quotation header level, after creation. But in this case, there is no
node between them, just mention.
I hope it can help you.
regards
Ruy Castro

Open Quotations and Open Items

Hello Experts,
Can you tell me what are open quotations and open items? And in what scenario they are used?
Arathi

Open quotations are those on which no orders or reference documents have been created so far.
Open quotations can be seen in VA15 tcode
Open quotations is a term which is applicable for the whoel document.
On the otherhand, there will be some documents where reference documents are created for some items, while for other items no reference documents are created
For example lets say a quotation has ItemA and Item B, both having 5quantities,
On this an order is created for ItemA only for 5quantities.
Now the quotation is in Partly completed status
Item A willbe in Complete status
Item B will be in Open status.
Hope thsi helps you to undersatnd things.
Reward if this helps.

Same discontinue and follow up material?

I have used before this function having a follow up material with indicator 1 and effective-out date. However, this time I have 3 materials A, B, C.
The logic I want to use is the following but I'm not sure if SAP supports this:
A = discontinue material and B = Follow-up material. Using indicator 1
B = discontinue material and C = Follow -up material. Using indicator 1.
So far, SAP is not allowing me to have B as discontinue and follow-up material at the same time. Any insights?
Thanks for your help.

Hi Lee,
If you try to set the discontinuation for a follow-up material, then error message "Message no. 61224 -Multi Level Discontinuation not suported" will be generated when you try to run MRP. Refer Note 398238 - Error message 61224 for parts provided
For more information on Discontinuation data, refer Concept of Discontinuation Data - Material Master and BOM
Thanks & Regards,
Ramagiri

Discontinuation indicator and follow up material.

Hi,
I am facing the strange issue for which i need your expertise. The requirement is like:
1. "X" material is discontinued and "Y" is as follow-up in two plants A & B. Discontinaution group and follow-up group has also been assigned in the BOM.
2. Now The client want to reverse the settings . means "Y" should be discontinued and "X" should be follow-up in both plants A & B.
Now I have removed the discontinuation indicator and follow up material from "X" in both plants. But when I am going to discontinue the "Y" material and putting " X" as a follow-up material, The system is giving the message "The specified follow-up material results in recursiveness
Message no. M3609
Diagnosis
You have entered a follow-up material. However, the BOM explosion for the follow-up material leads to the discontinued material, resulting in unpermissible recursiveness.
Procedure
Enter another follow-up material or cancel the entry.
Please suggest me where I am missing in my settings and what is the reason for this message.
Regards
Deepak Sharma

Dear ,
Check the following :
1.Validity of the Bill Of Material or any deletion flag is set in the present BOM.
2.Please check the following SAP notes :
Note 161742 - Consulting note: BOM recursion/low-level code 999
Note 839879 - Trace 'BOM is recursive'
Note 139517 - Recursiveness for follow-up materials
Note 42891 - Recursiveness check
Hope this will help you to figure it out
Regards
JH

Discontinued part and follow up material

Dear Guru,
How to use discontinued and follow up material with effective date. I am using MTS Scenario.
Please help.
Regards,
Sanjay Sahoo

Hi Sanjay,
refer to the below link, it should answer your query:
Re: Discontinuation Indicator - Need Guidance
In addition to the above details:
In material master for the material which is being discontinued, in MRP-4 view you need to maintain discontinuation indicator, effective-out date & Follow-up material.
If you need any additional info, revert.
If helpful award points
Regards,
Vivek

Make-to-order. Requirement linked to Quotation and not to Sales Order

After we have changed our Make-To-Order Materials from unvaluated sales order stock to valuated Sales Order Stock we do face a problem with the Requirement for those Sales Orders lines which are started with a Quotation. After running MRP a planned Order is created (ok) but the Planned Order is linked to the Quotation line and not to the Sales order line. When converting the Planned order to a Production order the AFPOD-KDAUF field is the number of the Quotation and unfortunately not the Sales Order number.
The Quotation looks ok. Item category is AGN and Schedule line category is BN (no MRP). When converting the Quotation into a Sales Order the Item category change to TAN and schedule lin category is now CP.
The copy rules QT -> OR (VTAA) shows copying requirement = 501 Schedule qty >0 and DataT = 201 General Schedule line Data
Anyone got a clue about where to look? ¨
Thanks in advance
Ken

Hi Guys
Thanks for your proposals.
The Materials involved are standard items (FINI -> NORM) and our Set-up with item category TAN works perfectly when we create a Sales Order without a Quotation first. And the way we solve the problem manually right now is to convert the Quotation and delete in line item and recreate them manually.
I found that if i delete the requirement type in the Quotation and then convert the Quotation into a Sales Order then the Planned with be linked to the Sales Order = perfect.
Any other ideas
Best
Ken

Exception /BOBF/CX_FRW_FATAL while executing /SCMTMS/TEND_CONT_PROCESS (Process Frieght quotations and overde Freight RFQs).

Hi Experts,
I am getting a dump when executing /SCMTMS/TEND_CONT_PROCESS (Process Frieght quotations and overde Freight RFQs).
Runtime Errors         UNCAUGHT_EXCEPTION
Except.                     /BOBF/CX_FRW_FATAL
ABAP Program         /BOBF/CL_FRW==================CP
Application Component AP-RC-BOF-RNT
HOW TO CORRECT THE ERRORS-
"UNCAUGHT_EXCEPTION" "/BOBF/CX_FRW_FATAL"
"/BOBF/CL_FRW==================CP" or "/BOBF/CL_FRW==================CM00Z"
"SET_APPLICATION_ERROR"
i really dont know why this dump is coming. I checked the "SET_APPLICATION_ERROR" method.
==> RAISE EXCEPTION TYPE /bobf/cx_frw_fatal
       EXPORTING
       textid           = /bobf/cx_frw_fatal=>sc_application_error
       previous         = io_exception
       mv_bo_name       = mo_conf->ms_obj-bo_name
       mv_proxy_bo_name = mo_conf->ms_obj-bo_esr_name
       application_information = lv_application_information.
Can anyone tell me the possible reason for this dump?
Thanks.
Regards,
Meenakshi

How do I combine 4:3 and 16:9 material in DVDSP for proper playback?

I am a making a demo reel and have 10 short videos. About half are 4:3 and the rest are 16:9. They need to all be on the same track and play back to back, with chapter markers, etc. I want to setup DVDSP properly so that when someone plays the DVD in a widescreen TV, the material looks correct. I realize different flatscreen TVs are setup differently by their owners, so I just want to play it safe. In my previous (many) tests, I can't seem to get it right. The 4:3 always looks fine but the 16:9 looks squished. I've done my testing on my macbook pro and my flatscreen tv. I think this must be a complex discussion due to the nature of TVs getting setup differently, but I would love an intelligent, logical, and easy to understand response to this question. Again, my main goal is to end up with a DVD that plays both 4:3 and 16:9 material in the same track and have it look good on a widescreen tv.

I know you dont want to hear this but you need to have them in seperate tracks to have them display properly. Should be a problem having them play back to back just a small pause as it switches from one track to another.

Template and One-Time Material Processing

Hi experts!
Has anyone implemented and used Template and One-Time Material Processing?
If so, what is your experience with it?
Best regards / Gustav

Hello Gustav
we have no experience in using this functionality. In most cases the use of this function is not what you really need in "real life" (depending clearly on the number of "one time materials"). In most cases it is most common to use the "normal" EH&S set up to profit from e.g. MSDS delivery etc.
But according to:
http://help.sap.com/saphelp_470/helpdata/es/9e/95463ce293dd3ae10000000a11402f/content.htm
http://help.sap.com/saphelp_rc10/helpdata/en/98/cb4d3c07c42b77e10000000a114084/content.htm
etc. it is a "simple" approach as long as you understand what is supported in using this approach and what is not.
Examples of processes which are not supported are:
- MSDS delivery
- EH&S SVT
- Creation of HSM master data
- etc.
As you can see the number of EH&S supported processes is low (only DG processes in reality).
I found one further related threads in this FORUM:
Template material processing is deactivated
C.B.
Edited by: Christoph Bergemann on Jun 13, 2011 10:01 PM

Why is different between consumption and spare part material Amount in Accounting?

I go to mb51
in Accounting document there is different
l found the standard price was changed in the last . it was changing from 850,000 to 1000
i don't know why is different between consumption and spare part material Amount Accounting??? please help me . how can I solve it?

pay attention just first document has a different accounting amount . in others there aren't different .see these screenshot :

Quotation and hierarchies of material

Similar Messages

Maybe you are looking for