Quotation Status Change to "Quotation accepted/Completed" after Order Creat

Hi,
My requirement is , i need to change the Quotation Item Status to "Quotation accepted/Completed" once order is created referencing the Quotation. Can you please help me regarding this. Any configuration is there or do i need to use any BADI?.
Thanks a lot in advance...
Reddy

Hi,
You can implement Badi ORDER_SAVE and use method CHECK_BEFORE_SAVE here you can write your logic i.e. until fulfills cetain conditions user should not able to set the status Accepted.
Regards,
Dipesh.

Similar Messages

  • My status change to pass from fail after 40 days. Microsoft Exam 74-409 Score

    Microsoft update 74-409 exam.
    My status change to pass from fail after 40 days..
    Recived below email. is this possible ?
    Dear Valued Customer,
    You recently took Microsoft Exam 74-409: Server Virtualization with Windows Server Hyper-V and System Center. After close evaluation of the exam, we have made some revisions that resulted in a change to your exam results. We are pleased to inform you that your
    status has been changed to ‘PASS’. This update will be reflected in your official transcript within two weeks. A new score report will be mailed to you within two weeks.
    Thank you for taking this exam and for your support of our program.

    Yes its possible, but its also possible that its a scam trying to entice you to provide information that could be used for identity theft.  I would wait a couple weeks and then check your transcript on the MCP site.  If the exam shows then it was
    for real.  If it doesn't then it was probably a fake message.
    The reason it might be for real could be that someone challenged the clarity of one of the questions in their comments and Microsoft decided after looking into it that some question was misleading.  This might have lead them to accept more than one
    answer or to throw the question out.  That could have modified your score in some way and promoted you above the Pass line.  It is possible, but not likely.
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • Status Change for Purchase order in Process Purchase order

    Hi All,
    We have implemented SRM 4.0 with Extended Classic scenario.
    SRM does provide standard status for Process Purchase order worklist (such as Ordered, Held, Error in Process etc.). Is there any BADI i can use to overright my own status message for the PO.
    To give brief background of the requirement. Client wanted status to be changed to "Cancel" For POs whose all the line items we have deleted or "Close" when Last delivery or Final Invoice check is ticked.
    I am aware that i can use BBP_DOC_SAVE_BADI as structure BBP_PDS_ITEM i can get items deletion indicator. But will i able to change the standard Status message?
    Presently even though all line items marked delete still shows PO as "Ordered" status.
    Kindly let me know if i can acheive with anyway.
    Thank you
    Ritesh

    Hi Masa,
    Thank you for your response. I have few doubts about the configuration which you have suggested.
    - Define Status schema for User status will create a status Profile in which i have to include my own status. In the document of Define Status Schema it specifies that After creating User profile you have to assign same profile to transaction types. (I.e. BUS2201 or BUS2121 etc).
    My concern is will my own status profile over-write the standard status which is coming? such as Ordered, Created, Transmission fail etc.
    If so then do i have to create status profile to include all the Standard Status message in it as well?
    - Other thing i found that Ordering PO goes through many standard status message (COMP, CRTD, CTRA, DCOM, ORDR) and always the last status in the Hearder will display on  ITS level. Is my understanding right?
    - I found that there is a standard system status message I1045 (BECN Cancel) Can i use this through BADI?
    Kindly let me know.
    Thank you once again.
    Regards
    Ritesh

  • Inbound delivery status change

    Hi,
    i have a situation where in the inbound ASN status changes from C to B,after a return delivery is done  in MIGO (mvt type 122)against the goods receipts.
    is there any way to prevent the inbound deliveries from opening up?
    we are using ECC 6.0.
    Any assistance will be highly appreciated

    Hi Ram,
    I have came accross this sitation as well.
    Previously, MIGO won't update the deliveries statuses. That way
    we did not have that tricky situation. However, in ECC6, it is possible to post
    partial GR via MIGO and delivery is updated also. It cannot get
    solved via customization, you may consider in case you really to check
    the possibility via your own code implementation.
    Best Regards,
    Christian Rosa

  • SAP JIT Inbound - The external status change you requested is not planned

    Hi All,
    I am getting an error as "The external status change you requested is not planned" while creating JIT call in JIT inbound.
    I have configured actions and external status.
    What would be the problem??
    Help me
    Thanks,
    Anbazhagan

    Hi Lakshmipathi,
    Thanks for your reply.
    I missed out some configuration. Now the issue is solved.
    Thanks,
    Anbazhagan E

  • Set sales order status is complete after Billing document created

    Hi experts:
    Current
    Complete rule of item category 'TAN' is space.
    The Status will be set complete after Delivery  document is created.
    I want to change the rule to
    the status will be set complete after billing document is created.
    Han can I do it ??

    Go to VOV7, select the item category and execute.  There maintain "B" against the field "Completion Rule"
    thanks
    G. Lakshmipathi

  • Status change from 'Completed' to 'In Process' not allowed

    When configuring Appraisals in R/3 we want to change the  Status of 'Completed' when pressing the 'Reject' button so that it moves to the Target Status of 'In Process'
    However, we are getting an error message:
    Status change from 'Completed' to 'In Process' not allowed
    The SAP help states the following:
    In Process (only if final appraisal or part appraisal is defined)
    This has been defined at Template Level.
    So I don't understand why we are getting the message.
    Does any one else know of a way to configure the Appraisal template so that after it has been 'Rejected' it moves back into 'In Process'
    Thanks
    MN
    Points Rewards!

    Hello Andreas,
    Ah, sorry, there was so much talk about user decisions that I assumed you were using a standard decision task.
    Still, I would be extra careful of changing the way workflow usually works because you have an unknown target audience that are based on the standard.
    The standard SAP philosophy is quite simple: cancel/F3 or do nothing and it stays reserved. If you do not want it reserved, you need to perform an action. This is based on a majority of processes: in most cases when you execute a work item you will also be the one who is going to completed it. Replacing it is the lesser used of the two alternatives, therefore it is the only one that requires an action on the part of the user.
    Again, this is intended as constructive input. Strange quirks and unusual behaviour tend to add a black mark to software if they do not make things easier to use. In many environments users are not even aware of the reserve/replace business, so there you would be adding an additional layer of complexity.
    Personally I would find an exit popup annoying as a regular workflow user - regular decisions can be approved with one click, or I can back out with a single click if I need to make a phone call or look up some info before approving - but with this new-fangled thing I've got an extra button to click and an extra thing to think about. This is especially the case in a payment approval scenario where you may have users in some departments who may approve hundreds of payments each week.
    My suggestion would be to leave it like that. By all means put an option into the user decision to put it back or to 'un-reserve' it (and loop round if the user chooses it). That way you are adding value and not clicks.
    Cheers,
    Mike

  • Auto status change after UD

    Hi Guys
    I have one requirement which is as described below:
    Calibration schedule is being prepared for vernier with the help of maint plan. But while doing UD the requirement is that if UD code is "cannot be used" then the vernier should be locked by system for further use.
    I have made use of follow up action for that and a pop up appears while saving UD where the fields stated are object, description of object, present status of object and status required, but all are greyed out. How can i change the status to locked?
    Please provide inputs if anybody has done the same thing.

    hi
    the equipment status changing is depend on the result you recorded and the valuation done ,it is not based on usage decision .
    After making the result recording ,while saving system will prompt you with message for valuation ,whether it is accepted or not ,where you have to specify your requirement ,and while making usage decision system will promt you with the message as current status and status required where there will be option to change ,if you want ,kindly mark the change button or else leave it
    regards
    thyagarajan

  • Sale Order Status Change after delivery of materials from projects

    have ETO sccenario which consists of all modules such as SD,PS.PP etc. Materials will be procured from external vendors & manufactured inhouse through project systems. After delivery of materials from project systems, billing & invoicing will be done at sales level.
    On delivery of materials from projects, sale order status remain open. Request you to look into the matter & suggest about status change of sale order after delivery / billing.
    Regards,
    Ranjan

    Hi,
    In sale order, WBSE is assigned. Delivery of materials are through cns0. then subsequently picking / packing / billing will happen at sales level. Billing is of delivery related. Please suggest to fix the issue.
    Thanks & Regards,
    Biplab Ranjan

  • Packing status becomes complete after using Pick HU

    Hi Experts,
    We use Pick HU for Outbound to pick products from warehouse to packing work center
    but as soon as we use pick hu in warehouse order for Out delivery and confirm the WO to pack center
    the status of packing becomes complete
    which should be ideally complete after we repack the products in to ship hu
    is there any thing i m missing to accomplish this?
    Regards,
    Roopendra

    Hi  Roopendra
    I hope this is Correct as its belong to task and not activity.
    And if you see activity OB02 then its has to complete at work center. This is about task.
    Pack status on del for picking and not for packing activity.
    Regards
    Suraj

  • Change Button Not Active even after Delivery Completion Indicator is Remove

    Hi ,
    In SRM 5.0 ,Change Button Not Active even after Delivery Completion Indicator is Removed for Completed PO to cancel the GR or make changes.
    Thanks & Regards,

    Hi,
    Please check these notes.
    Note 1267916 - PO item flags do not stay checked
    Note 1174982 - Return/deletion of confirmation does not update the PO flag
    Thanks
    Zameer

  • Process completed successfully but status changes  to red

    hi in my process chain all the processes of the master data load local chain completed succesfully but the status changes to red and the chain is not processding further.  wh t may be the reason for this.
    do any one have idea about this

    Hi,
    RED means the whole status of the chain or any particualr step in the process chain..?
    If the total status is RED even all the steps finished successfully once come out of the session and again refresh and chk status...
    Now if any step in the chain fails the total chain status remains RED only...
    If u still needs to process further then u can use FM: RSPC_PROCESS_FINISH in SE37
    U hav to copy the detals from the table RSPCPROCESSLOG.........
    Check this blog:
    /people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
    rgds,

  • After restoration of files via time capsule my status changed to "Guest" and I can't find the pass word for changing it back to Registered user. Any Help?

    after restoration of files via time capsule my status changed to "Guest" and I can't find the pass word for changing it back to Registered user. Any Help?

    Hey mate I had this same problem exept instead of my recording disappearing my Chorus that went for 8 bars extended out to 20 bars lol and I used auto tune on it and it sounds like t-pain on a very bad day so it sounds like it does a few things when it comes up that error

  • Generating deltas records after a work order status change

    Hi
    We are currently reporting on Work Order status changes in BW. However, the process team has written an ABAP program that allows users to change a Work Order status or an Opeartion status. Any changes using this method do not trigger a delta record to be written to the Outbound Queue MCEX17 and subsequently we do not pick them up in BW without having to to a re-initialise.
    Could anyone tell me how we could trigger a delta to be written to the Outbound Queue in the same manner as the standard Work Order change transaction IW32.
    Cheers, Mark

    Hi
    I m not sure about functionality though but you can create delta by using FM...
    Search SDN and you will get doc for that..
    Regards
    Guarav
    Assign points if it helps

  • Read Master Data for Process order status change (REL to CRTD)

    I am unable to read master data and thus change the status of process order from REL to CRTD. (COR2)
    The reason it says, error in BOM reading, Transport Requirement (TR) already generated.
    Even after deleting the TR (LB02), the issue still exists.
    Is there another way of changing the status or some more steps are needed for the TR deletion?
    Thnx!
    Abhi.

    Order header Status-
    REL  Released
    MSPT Material shortage
    PRT  Printed
    PRC  Pre-costed
    BASC Batch assignment complete
    BCRQ Order to be handled in batches
    SETC Settlement rule create.
    In the error log it gives-
    Diagnosis
    Transfer requirements have already been generated, so therefore the bill of material cannot be read.
    System Response
    The system does not execute the action.
    Then I deleted the TR (LB02), but still I cannot reread the master data.
    The MSPT was for only 2 materials out of 6 and there is no GMPS status.
    There is prod supply area and control cycle used.
    and the TR generated at order release.

Maybe you are looking for