RA thru Valuation Method 07 and its inexplicable settlement

Hi,
I have run RA and Settlement with Valuation method 07 and seen the results. But postings to COPA is perfect but Finance postings are in reverse. Let me explain and request you to support me with your valuable inputs.
The Actual costs is 1000 whereas the planned estimate is 2000. The Actual revenue is 1200 whereas the planned revenue is 3000. The POC is 45%. Hence, while doing RA, the system has given the result that the calculated costs is 900 and hence WIP is 100. In the case of Revenue, the calculated revenue is 1350 and hence 150 is revenue in excess of billings. This is quite ok.
But when it comes to settlement, the change in WIP accounts is debited and WIP account is credited with 100 instead of change in WIP account is credited and WIP(BS a/c) is debited. In the same way, the Rev in excess billings(P/L ac) is debited 150 and Res for excess billings(BS a/c) is credited.
My copa postings shows the revenue of 1350 and cost of 900 and a profit of 450. But the income statement shows loss of 50. The 250 goes to the debit side instead of credit side of the income statement. It is quite inexplicable.
Regs!
Edited by: Ashok Singh on Apr 24, 2009 5:09 PM

hi
check your settings for accounting documents postings

Similar Messages

My ipod cclassic 80gb is hang after trying dat press and hold method then also its not working please tell me solution

My ipod cclassic 80gb is hang after trying dat press and hold method then also its not working please tell me solution

Thanks for your response and good luck wishes, I suspect I will need them!
In principle, I agree re: the manufacturer's warranty. However, I am pretty upset that this is now my second iPod to develop a critical fault within weeks of the warranty expiring, and frankly, it is not unreasonable to expect a state-of-the-art $500 electronic device to last well beyond one year of life.
I agree talking to Apple is not likely to do me any good (the clue is in how impossible they make it to talk to them in the first place) - but that is not necessarily OK. I expect I will have to pay money to get the battery replaced - again, not OK (full stop - but especially given the cost of the device and the money I have spent with Apple). Yes, the batteries have a limited lifespan, but it should last longer than this (and surely, I should notice a gradual decline in its functionality, not an instant stop).
I will try Deggie's suggestion (see my reply post), but probably won't hold my breath (think I have already done this). I probably will have to get the new battery - and probably under my own steam. It is a principle at stake and I feel I should be able to let Apple know how I'm feeling - and am frustrated that they make this virtually impossible. It sends the very clear message that they are not interested in listening to their customers.

Object system and its method genericinstantiate?????????????

Hi Experts,
I have a workflow, in this workflow header tab there is no triggering event is mentioned .
no business object no triggering event .
when i checked the workflow the first task is created by business Object system and its method genericinstantiate.
now i am not able to understand what is the role of BO system and this method.
Also i am not able to understand how this workflow is getting triggered is this method is helping this workflow to get triggered.
thanks in Advance
Thanks & Regards
Anit Gautam

when i checked the workflow the first task is created by business
Object system and its method genericinstantiate.
now i am not able to understand what is the role of BO system and this method.
If you are not able to trace from where this event is getting triggered, the simple way to find how the task is receving the event is
1.Switch on the event trace by using the txn SWELS.
2. Trigger the workflow by using the same event either from SWUE txn or directly stsrting the process which raises this event.
3. Onc the event is triggered , go to SWEL txn and check what are the workflow templates and tasks are receiving the event which you have triggered.

I have installed adobe pdf to get a document sent to me thru my employer and i put my password in and its still asking me for a document password do i need to set one up

I have installed adobe pdf and put in my password and its still asking me for a document password in which I have no idea what it is

So you put your password in when you installed it?
If that's the case, that was just your administrator password used to allow the install. It has nothing to do with the document.
If the document is asking for a password, you'll need to get that from the person that added a password to the pdf.
If neither of the above helps, please give us more info on what you are attempting to do and what is going wrong. LEtting us know your version of Adobe Reader may also be helpful.

Data Import error - Valuation Method (ODBC -1029)

Hello all, first post on the SCN. I did some search for similar problems, but nothing seemed to help here.
We are using Business One, two different companies and databases. We were at the time of the year to update the price list, so we used the Administration -> Data Import/Export -> Data Import -> Import from Excel.
One company (US only) imports perfectly, but the other database (Canada + US) gives me the following error message on 91 / 1036 entries.
Row Number xxx : [Items - Valuation Method] , 'Field cannot be updated (ODBC -1029)
Since the errors only appears on one of the two databases, I ruled out that the excel sheet we used to be the problem.
The excel sheet only has 4 columns : The item identification, the price list that it needs to update, the price, and the currency (USD or $ for us).
Neither of the two companies use any valuation method. In fact, neither companies have the field at all in Item Master Data, and its grayed out in the Company Details.
We also made a dump of the entire item database, and compared what items were imported successfully and those that generated the error, and while the column Valuation Method either had nothing or A, there was no pattern to it. Some errors had nothing, some had A in it.
I checked for any other differences between items that were imported and the ones with error, and cannot see any visible differences, so all I can think here is that its either an invisible setting when the item was created, or there's some character that is creating a fault somewhere (like an empty space).
One of the topics found on this error message (ODBC -1029) said that we might need to request a script to fix the database, but that topic was back in 2006, I'm not sure if it still applies, 8 years later.
Essentially I ran out of things to try on my end. Now I can only ask to the experts.
Thank you for your time!

The company that has troubles importing does not allow us to change the Valuation Method for each item. The field is missing entirely from the Item Master Data. I included a screenshot.
The field is grayed out in the Company Details, but its set as Moving Average. The other company uses Moving Average by default as well, from the looks of it (the field does appear in Item Master Data, but its grayed out).
We used the same excel sheet to import data in both companies, just need to figure out why its 100% on one side and not on the other side.
Just to be a bit more clear, we cannot select or visualize the Valuation Method on the items that are not getting imported. Its invisible.
When we exported the full list of items, there was no pattern between the items that are not imported and those that are imported properly.
To be clear, the Valuation Method for :
Items that are imported properly are A or blank.
Items that are not imported and generate an error are A or blank.
There is no logic between those that work and those that do not, which is why I can't figure it out on my own.
Thank you!

OKG3 - Create a new valuation method

Hi All!
Im trying to create a new valuation method by OKG3 without "Result analysis method" and "Cancel
Inventory/Reserves with Status" fields filled out. I need these fields in blank but these fields are mandatory.
Even I change to expert mode its necessary fill out these fields.
Any idea to resolve this issue? Is it necessary to do any previous configuration?
Best regards,
Ricardo Sanerip

Hi,
Please go through this building blocks in order to understand need configuration steps
http://help.sap.com/bp_bblibrary/600/BBLibrary_start.htm
Best regards
Medha

Sub Contracting in FIFO Valuation Method

Dear All,
I am facing one serious problem while using Subcontracting Addon.
We have developed Sub Contracting Add-on based on Standard Valuation Method and it is working fine.
But when we use FIFO Valuation method then it will not allow.
So could you please guide me the process/procedure how to implement Sub Contracting in FIFO Valuation Method.
Means what are changes needs to make it success in FIFO.
Thanks
Vikas

Hi
Yes its right not to change the earlier valued items on one costing method to another.
Imp. to note that, for manufacturing/sub-contracting the best costing method is Standard. Because, in manufacturing processes, its very much impossible to track the exact in and out of material as per FIFO; costing method comes into picture as you made some inward and outward or some movement of material, i.e. in case of purchasing material FIFO starts acting as you start consuming the materials or you transfer the material from one warehouse to another, other than in which you have received the material. When you have material on floor, its quite impossible to track the exact movement of material, means which material is actually being processed on the floor. So, If we use FIFO for such items, then actual costing will be always different from executed/system costing, Also, FIFO is suggested for only those business practices who are following the JIT principle. But, by having Special as costing method for manufacturing items, we avoid such problems to have actual costing, though it may again differ from actual costing, but overall as per the business experience we come to know COGS to actual basis.
In Special Costing method, it's recommendable to revise the Standard cost of the items, periodically.

Results analysis: Valuation method 15 (RRB)

Hi experts,
Can i have a detailed example for posting lines for RA valuation method :
15 - Derive revenues from resource-related billing of dynamic line items
warm regards
ramSiva

Hai Mikhail
As u mentioned u set the RA method for POC3 in OKG3.
Assuming maintained in OKG3 - the status control ,profit Basis,Valuation Level and its Minimum Values.
Is the RA version been maintained in OKG2 ?
In OKG2 - need to maintain the RA version with respect to the Controlling Area like 0 or 1.
Is OKG8 has been maintained on the Posting Rules - means where the RA version should have the corrsponding Profit & loss account number and Balance sheet account number.
Kindly check and verify according to the relevant RA used/picked using OKG1 in Config - OKG2(maintain RA versions), OKG3(valuation methods for RA), Define Line ID's , OKG5 ( Assignment of Cost elements for WIP and RA) , OKG4( update of WIP calculation and RA) , OKG8 ( Posting rules in WIP and RA) .
If all these maintained u will definetelu get the KKA2 result.
ENJOY SAP PS
Regards
PP

Change valuation method from moving average to FIFO

We have incorrectly given valuation method for our raw materials to moving average instead of FIFO. Now, we have a lot of transactions and cannot change the method after a transaction is done for any item. I want to know if this solution will work:
1. create new database with item and business master data, chart of accounts, item groups as before
2. change valuation method of all items
3. Import GRPO, Excise and A/P invoices from old database
Does step 3 create its own JEs?? If it does, then my problem will be solved.

Hi Krishna,
this is the SAP Business One Forum in German. Please post your threads in English to the forum here:
SAP Business One Application
All the best,
kerstin

Valuation methods

Hi,
Can we use separate valuation methods (ex. moving average, FIFO etc) for each plant separately, when all the plants are under same company code and if we set up plant as our valuation area? Please advice.
With regards,
Prabhakar.

Hi,
If we set up plant as valuation area means,
If a company code has been assigned to plants say plant1 and plant2, the vlaue of all the materials in plant1 and the value of all the materials in plant 2 will become the value of stocks in that company code.
Each and every material in the plant will be having its own price depending upon the price control (v or s)(v--moving avarage price price value keeps changing over a period of time, s price will be constant over a period of time).
the stock of that perticular material will be multiplied by the price in a perticular plant in all the storage loactions of that plant will be considered and will be added up (of all the materials in the plant) to find out the total stock value of in that plant.
SAP can storage the data of stock values for each material in a plant and all the materials in the plant based upon the above said calculation.
However differentiated valuation can be maimtained for a single material using the method split valuation.
FIFO is the method to issue materials based upon first in first out method.
The report TCODES MMBE, MB52 ,MC.9 etc will provide all the details with regard to the stocks, values.
Regards,

I have an iphone 5. I have no idea of the ios version in it. Recently i broke my iphone screen and its showing up nothing. it was never synced to itunes or to any pc. When i tried to connect iphone to itunes in my pc it was asking was passcode which

I have an iphone 5. I have no idea of the ios version in it. Recently i broke my iphone screen and its showing up nothing. it was never synced to itunes or to any pc. When i tried to connect iphone to itunes in my pc it was asking for passcode which i had forgotten ages ago. Suggest me the possible ways to recover my iphone.

Since the screen doesn't work, it will be challenging to get it working, even thru iTunes. You will need to ask yourself if you want to invest more money in it or get a new one, especially since the contents will be lost since you don't know the passcode. Apple will gladly replace the screen for a cost that represents a significant portion of the price of a new. Once the screen is done, you may or may not be eligible for the free iPhone 5 Battery Replacement Program.
Or, if you decide to salvage it and are strong of heart and firm of hand, you can replace the screen yourself for less. See here and note they carry kits with all needed tools and parts.

Create A/R Invoice and Its Incoming Payment using DI Server

Hi Everyone,
I need to create an A/R Invoice and its payment in a sigle transaction using DI Server. The problem is that I don't know the DocEntry that will be assigned to the invoice in order to set it in the SOP message for creating the incoming payment.
I guess the SOAP message should look like:
<?xml version="1.0" encoding="UTF-16"?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<env:Header>
<SessionID>F46EDCE6-3F79-1F9F-1D1E-DC6226D04FA7</SessionID>
</env:Header>
<env:Body>
<dis:AddObject xmlns:dis="http://www.sap.com/SBO/DIS" CommandID="Add invoice">
<BOM>
   <BO>
    <AdmInfo>
     <Object>oInvoices</Object>
    </AdmInfo>
    <Documents>
     <row>
      <DocDate>20040707</DocDate>
      <DocDueDate>20040707</DocDueDate>
      <CardCode>BP</CardCode>
     </row>
    </Documents>
    <Document_Lines>
     <row>
      <ItemCode>Item1</ItemCode>
      <Quantity>3</Quantity>
      <TaxCode>My Tax</TaxCode>
     </row>
    </Document_Lines>
</BO>
</BOM>
</dis:AddObject>
<dis:AddObject xmlns:dis="http://www.sap.com/SBO/DIS" CommandID="Add Incoming Payment">
<BOM>
   <BO>
    <AdmInfo>
       <Object>oIncomingPayments</Object>
    </AdmInfo>
    <Payments>
       <row>
           <CardCode>BP</CardCode>
           <DocTypte>rCustomer</DocTypte>
       </row>
   <Payments>
   <Payments_Invoices>
        <row>
             <DocEntry>???</DocEntry> <---- ???
             <InvoiceType>it_Invoice</InvoiceType>
            <SumApplied>100</SumApplied>
        </row>
   </Payments_Invoices>
   </BO>
</BOM>
</dis:AddObject>
</env:Body>
</env:Envelope>
Any help?

Dear Hugo Moreno,
You could use the GetNewObjectCode Method of the Company Object to retrieves the key of the last added record.
Please refer to SDK DI API help for this method.
Best Regards
Jane Jing
SAP Business One Forums team

How do I print the contrast between "filled" text and its surrounding "box"?

Hi,
Apologies in advance for any ambiguity or confusion . . .
I am a self-taught Photoshop user who has come upon a problem to which I cannot find an answer, despite searching online for hours . . .
When I design a project, it looks beautiful on screen . . . when I print it, however, it loses the definition between colors inside a font and the shape surrounding the font . . .
To be more exact:
I am working at 300 dpi . . .
I create a rectangle and fill it with red. I then write text inside of the rectangle and the font color is white. Onscreen, it looks clear and well-defined. When I print it, however, there is not clear definition between the font and its surrounding area . . . the colors seem to bleed into each other . . . I have tried using different paper (glossy, matte, etc.), have tried putting a narrow stroke around the text, etc., but nothing help to clearly define the difference between the text and its surrounding shape/color.
It also does not matter the size of the font, although the larger the font, the easier it is to "see" the difference. But a white font at 24 point looks no sharper than a white font at 8 pt.
I am using an Epson XP-610 printer . . . it is a home deskjet and I mainly design for fun, but this "lack of sharpness" on the fonts is driving me crazy. I would included a screenshot, but it would not help much, since the project looks beautiful and clear on the screen.
The colors only seem "muddled" when I print. Any advice, or even a point in the direction of something I can read to help me understand what to do, would be helpful. . . . TIA!I

Hullo Cheapster:
I too am confident that this facility does not exist in relation to the underline function as such. Nor am I aware of a workaround that would let you access it straightforwardly for routine usage in body text. The underline facility, like the strikethrough, is provided because it is standard in some documentation which a wordprocessing might be expected to serve - but as such, it is provided in limited conventional formats. Otherwise, I agree, it is not ideal typography.
However, for occasional use, there are two workarounds you might like to consider. One is to use the line drawing facility available through the insert menu (insert shape, choose line; then grab its handles to make it horizontal) or the same process initiated from the objects icon in the toolbar.
Be aware, however, that the above could require further attention to your wrap options: you would need to deselect any wrap - but could still need to modify your line spacing options to avoid irregular line spacings with the rest of your text.
Possibly simpler is to bear in mind that you can produce an underline without its text. To do this, select underline (Command / U) and type "non-breaking spaces" (option / space). This would allow you to place your underline on a separate line from your underlined text. You could do the same with the strikethrough function, which you access via the effects section in the font panel for closer spacing; or alter the line spacing where you need to do this.
Either of the above would affect your surrounding text in a way that would make these methods unsuitable for incorporation into body text.
However, if your interest in doing this relates to headlines or the like, one or other of these options might suit your purpose.
Regards.

How to find out the failed sql command and its data from DEFERROR

Hi,
has anybody a procedure or some other possibilities to read the content of column USER_DATA of the advanced replication view DEFERROR in order to find out the failed sql command and its column values?
Thanks in advance.

Hi Vishwa,
             The control would be something like this for navigation in Get_p_xxx method u mention as link and u mention a event name which gets triggered on the click of this hyperlink. So your GET_P_XXX method would have the following code:
CASE iv_property.
    WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
      rv_value = cl_bsp_dlc_view_descriptor=>field_type_event_link.
    WHEN if_bsp_wd_model_setter_getter=>fp_onclick.
      rv_value = 'EXAMPLE'.
Now you have to create a method as EH_ONEXAMPLE at your IMPL class and within which you would give an outbound plug method. Within the outbound plug the target data would be filled in the collection and window outbound plug would be triggered.
This is a huge topic and i have just mentioned you basic things.
Regards,
Bharathy.

JE Passed in case of Standard valuation method in 2007B

Dear All,
I am bit confused---
The scenario is i have done one transaction for A/P invoice.The JE passed in case of A/P invoice & in case of item having valuation method standard & procurement method make is hitting material variance account instead of hitting inventory account since the tax say cst is inventoried.This issue is occurring only in case of standard valuation method.In case of other valuation method the accounting entry is correct, so what might be reasons behind it.
Also, if anyone could provide me sap portal link which will help me out to identify the changes which took place in different PL's.
Regards-
Mona.

Hi Mona ,
The quick thing is to check :
1. What is the standard price of the item
2. Is your GRPO price is difference than AP invoice
Everytime you purchase it will check against your standard price and if it is different it his variance account .
Hope this helps
Bishal

RA thru Valuation Method 07 and its inexplicable settlement

Similar Messages

Maybe you are looking for