RAM only some combinations? Issues...

Hey,
I just installed a new kingston 2gb stick of RAM into my 1st gen macbook pro.
Originally i had two 512 cards in there.
when i turn my computer on with just the 2gb in, it's fine.
but when i include either one of the 512s additionally, i'm met with a black screen and solid 'on' sleep indicator light when i start up.
Are there only certain combinations of RAM that can be used? Like maybe only 2gb/1gb or 2gb/2gb?
I can't imagine apple's original samsung ram went bad that suddenly? it has worked fine thusfar.
Any knowledge would be appreciated, thanks.

Core Duo-based MBPs like yours can only support a *maximum of 2 GB of RAM*. It's a limitation of the Core Duo chipset and memory controller.
As you found, you can run with a single 2 GB stick and an empty slot. You'll get slightly better performance with 2 x 1 GB slots (dual-channel mode gives a slight improvement compared to a single stick). Note that the single 2 GB stick is better than 1 GB total, I'm just suggesting that 2 x 1 GB will be even slightly better than that.
Hope this helps...

Similar Messages

Hi, I had recently purchased ipad3 and but obviously have been having issues with heating up and some minor issues with video playback etc. Apple has agreed to replace my device. I need help in deciding whether i should get a new ipad3 or opt for ipad2.

Hi, I had recently purchased ipad3 and but obviously have been having issues with heating up and some minor issues with video playback etc. Apple has agreed to replace my device. I need help in deciding whether i should get a new ipad3 or opt for ipad2. Seller is willing to replace it with ipad2 as well..
Have also heard that the ipad3 revamped version is around along with the mini pad rumor..too much information - lot's of confusion pls help

Lindsay,
Your iBookG4 is still a pretty awesome Mac. Like already said, it has the power to run Leopard, but it depends if you have an internal DVD drive.
Then I suppose you have to add up the cost of the OS, perhaps another 512MB RAM, iLife 08 and replacements for any favourite apps that you currently use (Leopard breaks a lot of stuff, but Intel breaks even more). Compare it to the cost of a new MacBook, which wil have all of that included and be 3-4x faster too.
It also depends on what you want to achieve with your iBook. My PMG4 still cuts it today, I still use it in preference to my new Mac Pro, It's about the same age as your iBook, and I'll only stop using it when it becomes "painfully" slow. My 1 year old son currently uses the Mac Pro (parts for a Mac Pro are easier to replace than those for a PMG4).
I think your choice is simple, if you can a cheap copy of Tiger, use that, it'll get your iPod Touch up and running. It came in DVD and 4 CD version (by request).
Leopard will work for you too but a lot of the best eye-candy requires quite a meaty graphics card and you may need a RAM upgrade and replacement software - OS9 Classic is not supported in Leopard.

Some minor issues on Toshiba T130-10g

Hello.
I experimentally try to use Arch on my Toshiba T130-10g. While I have already successfully configured wireless, synaptics, cpufreq, laptop-mode there are still some minor issues I want to solve:
1) How do I turn off wifi completely in order to save a little bit of power? Sometimes I don't need wifi so I would like to turn it off. I tried this command
iwconfig wlan0 txpower off
but it threw an error: Error for wireless request "Set Tx Power" (8B26) : SET failed on device wlan0 ; Operation not supported. I tried to google a lot for the solution, but I didn't fins anything which would resolve the issue.
2) How do I make that in cpufreq applet in Gnome I would change profiles (e.g. from powersave to ondemand) without having change it as a root but as an ordinary user?
3) Setting brightness doesnt work for my laptop. I can set it by setpci -s 00:02.0 F4.B=30 as a root but I'm looking for a more comfortable solution. BTW, editing one GRUB configuration file didn't help and ended in booting into command line (it was something with adding backlight=vendor or something like that...) I'm looking for a more comfortable solution that manually changing the brightness.
4) How do I turnoff bluetooth automatically after start?
5) Back in KDE 3.5 times, the network manager could easily track the statistics about downloaded volumes and categorize it in days, weeks and months I take. Is there something easy now like e.g. an applet which could do that in modern Gnome or KDE 4.X environment?
6) Is XFS as FS best for my multimedia partition? I have there MP3s, videos, ISO files and some backuped Documents. Would change to ext4 partition would have any visible effects (like loading my MP3 playlists in Juk faster?)
7) Since not all my FN keys work, I'd like to associate for example hibernate function with some key combination. How?
Thank you. Please feel free to respond to any of these questions.

1) don't you have a little wireless hardware switch on the front side of the laptop case to turn off wireless? If not, that ifconfig command only works for certain chipsets that support it. Did you try running the command as root?
3) did you try "xbacklight"? Works for me on my Toshiba L300
4) not sure but probably "/etc/rc.d/bluetooth stop" as root. Or put that command in /etc/rc.local
7) http://library.gnome.org/users/gnome-ac … 36.html.en
Last edited by lagagnon (2010-11-22 02:19:17)

Birthday calendar for only some of my contacts are showing up twice in my iPhone. They are not showing up twice tho on my iMac. No, I do not have duplicate names in my address book either. Any idea how to fix that?

my birthday events for only some of my contacts are showing up twice in my iPhone. They are not showing up twice tho on my iMac. No, I do not have duplicate names in my address book either. Any idea how to fix that?

I have uploaded the InDesign file so that you can take a closer look at:
http://www.hsdesign.comuf.com/downloads/
The file is called "Template_File.indd"
So, as discussed the main issues are:
1) The TOC doesn't generate all the listings (only those with the applied paragraph style "Heading 1 - Appendix")
2) When I try to create a new pargraph style and apply it to existing or new text, it reads the pargraph style in the Paragraph Style menu, but the style doesn't actually apply.
Hopefully you can figure something out from this. I really appreciate your help.
Thanks!

Only some of my photo's are syncing from iPhoto to my iPad, iPhone and Apple TV.

Only some of my photo's are syncing from iPhoto to my iPad, iPhone and Apple TV.
It may be my own fault due to learning Aperture and playing around with the locations of the Master Files.
The thing I don't understand is that when in iPhoto all thumbnails of all photo's are able to be enlarged / edited etc. When a thumbnail is clicked on there is no gray triangle with an exclamation mark indicating that the link to the original photo can't be found. I would have thought this was ok for syncing to take place.
When trying to sync through iTunes to my iPad for example (after some photo's have been synced) a window comes up saying "Some of your photos, including the photo “_MG_3820.jpg”, were not copied to the iPad “Mark Harlen’s iPad” because they cannot be displayed on your iPad".
I thought this may be due to lack of memory space but my Apple TV (which has the same issue but not the same warning window) has over over 100 free GB's so that can't be it.
When I did a test and re imported one photo that wasn't being synced to my other devices, that photo consequently was then synced so maybe it has something to do with the path through iPhoto to the original files.
Is there any way I can re establish these links with out having to create an entire new iPhoto library from the originals (I have a lot of albums and have done a lot of editing etc and don't and want to have to do it all again).
I look forward to you help and advice
Mark

Thanks for the advice but it didn't seem to work
I've decided to try ditching iPhoto and orgainising, syncing my photo's to all devices from Aperture
I have so far imported over 1200 photo's (relocating and renaming the master files as well) and find that when syncing through iTunes only 209 photo's are listed. The Projects/Albums are there but some indicate that there are 0 photo's in them when I know other wise (at least according to whats happing in Aperture)
I'm starting to suspect it may be a computer problem
Any thoughts?
Regards
Mark
PS: Just after posting this I restarted my computer, went into iTunes and my Apple TV started to sync. It was now syncing 854 photo's not 209 as before.

Only some photos syncing from iPhone '09 to iPhone 3GS now

To troubleshoot, I only checked boxed a single album of about 250 photos to sync to iPhone. When I do the sync only some photos within the album sync - some but not all. Same with other photos albums too. Does not matter if album is regular or "smart". Never has this issue before now. Lack of free space on iPhone is not the issue.
Rebuilt the iPhoto library by holding Command + Alt at launch and tried most of the options. No luck. Then tried all six check boxes in iPhoto.
I'm using...
OS X Lion 10.7.1
iPhone 3GS with iOS 4.3.5
iPhoto '09 (8.1.2)
iTunes 10.4.1
I must be missing something basic (I hope). Anyone know what's going on here?

See if these Articles offer any enlightenment...
Delete Photo Cache
http://support.apple.com/kb/TS1314
Goto Home > Pictures > iPhoto Library...
Right Click and choose Show Package Contents...
Find the Folder called iPod Photo Cache and drag it to the Trash...
Close the Finder Window..
Syncing Photos with iTunes
http://support.apple.com/kb/HT4236

Certificate [Thumbprint SOME THUMBPRINT] issued to 'CLientMachineName' doesn't have private key or caller doesn't have access to private key.

Hi,    We are trying to get a client to communicate with the primary Config Manager Site System(MP/DP).
We have a Config Manager Client Template that was setup using this guide.
http://technet.microsoft.com/en-us/library/gg682023.aspx
We have a Client Cert on the primary site system server (primary config manager server) based on this template and it meets the requirements specified in this document
http://technet.microsoft.com/en-us/library/gg699362.aspx
         Enhanced Key Usage value must contain
Client Authentication (1.3.6.1.5.5.7.3.2).
         Client computers must have a unique value in the Subject Name field or in the Subject Alternative Name field.
         SHA-1and SHA-2 hash algorithms are supported.
         Maximum supported key length is 2048 bits.
The Cert that we generated for the client meets the same requirements and shows the exact same template id but has a different subject name and alternate name (which is the clients machine name).
With this setup, we still get the following error
Certificate [Thumbprint SOME THUMBPRINT] issued to 'CLientMachineName' doesn't have private key or caller doesn't have access to private key.
Both the site system and client have the same trusted root cert installed.
What are we missing or what can we check?    Does the cert check process only need the client certs on both the site system and the client to be from the same template?
Here is a snippet of the clientidmanagerstartup.log
<![LOG[HTTPS is enforced for Client. The current state is 63.]LOG]!><time="15:02:32.057+300" date="03-12-2014" component="ClientIDManagerStartup" context="" type="1" thread="716" file="ccmutillib.cpp:395">
<![LOG[Begin searching client certificates based on Certificate Issuers]LOG]!><time="15:02:32.058+300" date="03-12-2014" component="ClientIDManagerStartup" context="" type="1" thread="716"
file="ccmcert.cpp:3833">
<![LOG[Certificate Issuer 1 [CN=THE_NAME_OFTHE_CA; DC=DOMAIN; DC=LOCAL]]LOG]!><time="15:02:32.058+300" date="03-12-2014" component="ClientIDManagerStartup" context="" type="1" thread="716"
file="ccmcert.cpp:3849">
<![LOG[Based on Certificate Issuer 'THE_NAME_OFTHE_CA' found Certificate [Thumbprint SOMETHUMBPRINT_1] issued to 'CLIENTMACHINENAME']LOG]!><time="15:02:32.082+300" date="03-12-2014" component="ClientIDManagerStartup"
context="" type="1" thread="716" file="ccmcert.cpp:3931">
<![LOG[Begin validation of Certificate [Thumbprint SOMETHUMBPRINT_1] issued to 'CLIENTMACHINENAME']LOG]!><time="15:02:32.082+300" date="03-12-2014" component="ClientIDManagerStartup" context="" type="1"
thread="716" file="ccmcert.cpp:1245">
<![LOG[Completed validation of Certificate [Thumbprint SOMETHUMBPRINT_1] issued to 'CLIENTMACHINENAME']LOG]!><time="15:02:32.085+300" date="03-12-2014" component="ClientIDManagerStartup" context="" type="1"
thread="716" file="ccmcert.cpp:1386">
<![LOG[Completed searching client certificates based on Certificate Issuers]LOG]!><time="15:02:32.085+300" date="03-12-2014" component="ClientIDManagerStartup" context="" type="1" thread="716"
file="ccmcert.cpp:3992">
<![LOG[Begin to select client certificate]LOG]!><time="15:02:32.085+300" date="03-12-2014" component="ClientIDManagerStartup" context="" type="1" thread="716" file="ccmcert.cpp:4073">
<![LOG[Begin validation of Certificate [Thumbprint SOMETHUMBPRINT_1] issued to 'CLIENTMACHINENAME']LOG]!><time="15:02:32.085+300" date="03-12-2014" component="ClientIDManagerStartup" context="" type="1"
thread="716" file="ccmcert.cpp:1245">
<![LOG[Certificate [Thumbprint SOMETHUMBPRINT_1] issued to 'CLIENTMACHINENAME' doesn't have private key or caller doesn't have access to private key.]LOG]!><time="15:02:32.086+300" date="03-12-2014" component="ClientIDManagerStartup"
context="" type="2" thread="716" file="ccmcert.cpp:1372">
<![LOG[Completed validation of Certificate [Thumbprint SOMETHUMBPRINT_1] issued to 'CLIENTMACHINENAME']LOG]!><time="15:02:32.086+300" date="03-12-2014" component="ClientIDManagerStartup" context="" type="1"
thread="716" file="ccmcert.cpp:1386">
<![LOG[Raising event:
instance of CCM_ServiceHost_CertRetrieval_Status
   ClientID = "GUID:GUID";
   DateTime = "20140312200232.090000+000";
   HRESULT = "0x87d00283";
   ProcessID = 6380;
   ThreadID = 716;
]LOG]!><time="15:02:32.090+300" date="03-12-2014" component="ClientIDManagerStartup" context="" type="1" thread="716" file="event.cpp:706">
<![LOG[Failed to submit event to the Status Agent. Attempting to create pending event.]LOG]!><time="15:02:32.092+300" date="03-12-2014" component="ClientIDManagerStartup" context="" type="2" thread="716"
file="event.cpp:728">
<![LOG[Raising pending event:
instance of CCM_ServiceHost_CertRetrieval_Status
   ClientID = "GUID:GUID";
   DateTime = "20140312200232.090000+000";
   HRESULT = "0x87d00283";
   ProcessID = 6380;
   ThreadID = 716;
]LOG]!><time="15:02:32.092+300" date="03-12-2014" component="ClientIDManagerStartup" context="" type="1" thread="716" file="event.cpp:761">
<![LOG[Unable to find PKI Certificate matching SCCM certificate selection criteria. 0x87d00283]
Thanks Lance

Hi,
It seems that there are something wrong with you PKI system.
Here are some steps for your reference.
SCCM 2012: Part II – Certificate Configuration
http://gabrielbeaver.me/2012/08/sccm-2012-part-ii-certificate-configuration/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I recently upgraded from an 80 to 160GB Classic but only some of the artwork in iTunes is synching. There was no problem with the old 80Gb classic. any suggestions?

I recently upgraded from an 80 to 160GB Classic but only some of the artwork in iTunes is synching. There was no problem with the old 80Gb classic. any suggestions?

here is an interesting thing: take the iphone and set lock screen to never. Now make an email with siri--be sure to activate her with call button. get to the body and get some text in there. then just stop talking. LOCK SCREEN APPEARS!!!!!! and of course you draft is gone.
There does seem to be a work around for some--maybe all these issues. Don't use the call button--use the buttons on the phone.
Siri seems to behave properly with scenerio above---sans call button. She does not go to lock.

Some minor issues we are facing in converting the 6i application to 10g ,

Regarding 10g froms i need support in resolving following issues:-
1. Direct print to default printer
In some of our applications user do not want to see the print preview and prefer direct print in 6i we were doing this by defining Desitination in report paramenters
2. Open each form in new window
We open each new form using OPEN_FORM() builtin, but all forms open in same MDI window, how using open form we can open the forms in new window
3. Maintaining source code in windows and linux
Initaially our developers test the forms under windows 10g AS environment but when the same form in uploaded on Linux machine they need to make some changes like " replacing all \ with /, converting all paths to lower case etc
how we can write the same code for linux and windows
These are some minor issues we are facing in converting the 6i application to 10g environment ...

1) We don't do direct printing. We print everything to PDF files in a user's network mapped drive. They print or preview as required.
2) We overcame this problem by using Java WebStart
[http://groundside.com/blog/JanCarlin.php?title=forms_and_java_web_start&more=1&c=1&tb=1&pb=1]
It frees Forms from being browser based and looks more like a 'real' application.
3) We use FormsAPI Master [Link to ORCL-Toolbox|http://www.orcl-toolbox.com/] to automatically convert from Windows to Unix. Our script converts uppercase to lowercase for icons, menus, library attachments, etc. We only do this once - unless new libraries have been attached in the wrong case. For things like '\' to '/' , Windows is quite happy to accept '/' as a delimiter. "cd C:\temp" is the same as "cd c:/temp". However, there are obvious differences between Windows and Unix. If there is any interaction between the Form and the operating system, then we do all our testing in the Unix environment - leaving Windows as a "does the screen layout look OK" environment.

Reader mode available on only some of the wiki pages.

Long story short I have a script that runs to create a back up of the info in our wiki. The script is set to change the view to reader mode so that the info extracted is cleaner without all the wiki buttons etc. My issue is that the Lion Server's Wiki does not seem to generate a reader view for all pages only some. Can't seem to find what determins if the page gets the reader option or not. Anyone out there know?

First off, your link is wrong: chartiermotorsports
You missed off the S from sports.
I'm no expert but until one turns up I have an idea for you to think about.
When you move to one of your gallery pages it appears that you are losing the URL to your slideshow or the javascript. This might be because the gallery folder is one step removed from the root than the other pages.
You might need to change the paths to take account of that added level or move the gallery pages up a level.
Hope I made that clear and like I say, I'm no expert.
Did you define your site in Dreamweaver?
Best of luck
Martin

TS1702 Renewed my subscription with the Sun app, was charged £0.69 but app won't load seem that I am not the only one having issue with this app. How can I claim my money back?

Renewed my subscription with the Sun app, was charged £0.69 but app won't load seem that I am not the only one having issue with this app. How can I claim my money back?

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

On Importing raw images to Lightroom only some of the images will import.

I have used LightRoom for years and just started having this issue. I select all of my raw images and "Open with" LightRoom 5. I can view all of the images that I want to import. It then imports only some. There are times it will import some and then freezes up in Import mode. I have even converted images to dng and found it to do the same thing. As a professional photographer this is frustrating!

If you mean "Open With" in your operating system, I am surprised that you get any images to import this way. As far as I know, Adobe has (tried to) disable this as a method of importing photos, and so I doubt you will find any help here in this forum on this matter, as this is not a function of Lightroom (although you used to be able to do it in earlier versions).

Some Niggling Issues with X6-00 16GB

Issues with the current software. Most still there after the latest software update to v31.0.004 1. Music player volume control refuses to function sometimes from the remote volume adjustment provided in the headset. >Volume adjustment when other applications are running doesnt work. > Replugging the headset resolves the problem. 2. Opening the all songs list and scrolling down in say 2 seconds of the opening of list doesn't hold your position. List scrolls up to the begining, seems like the page refreshes till the whole list is uploaded. why was this phone provided with 16 gb of storage if it can't handle a long list of songs? 3. Song play count doesn't increase or is not shown in ovi music player. 4. Deleting a song from an album currently being listened to stops music playback. 5. Songs can't be rated. 6. Automatic playlists should have one option for top rated songs also. 7. Music store downloaded songs have unnecessary extras in the song title. something like (explicit version) present in the album title repeating itself in the tracks of that album. 8. Song details have poor genre based categorization. Some hindi songs were classified into Blues. 9. Headset remote control stops working sometimes when music is being played in the background and I try to change the song. 10. Headset chord is flimsy and has to be handled with great care especially the ends where connector is attached. 11. Alphanumeric keypad keys change color sometimes and this becomes normal once thw key is pressed again. 12. Auto screen rotation is jerky and sometimes gets stuck somewhere in the middle of both orientations so that a little bit of both orientations is visible on the screen. 13. Nokia messaging using gmail does not support threaded conversations. 14. Threaded messages much awaited in messaging applicationwhich makes it easier to follow conversations. 15. Swype working fine. Better than the previous version. 16. Check key in message editing mode placed on top left is a bit cumbersome to rwach using the phone with one hand for right handed people. Much prefer the position provided in the n8 bottom right side of the screen. 17. Applications hang a lot especially when nokia messaging is running in background. Exiting applications are still shown as running in background for long time. 18. Camera appreciated. 19. Would like to have an option that remembers the customised camera settings so that the user doesnt have to enter his most sed settings again and again. Even if tthe settings last used are stored for the next time camera is used would do. 20. Typing long messages in qwerty layout with music and nokia messaging running in background toggles between two screen orientations occasionaly. 21. Cursor becomes yellow in message review mode. 22. Never been able to use gps accurately or even at all without the integrated gps mode selected. Does it even work? 23. Pdf reader application should be available for free. 24. Messages application becomes slow in opening newly recieved messages as soon as the inbox crosses 300 odd messages. 25. Album art displayed partially on the music deck on the home screen occasionally. 26. Software update over the air has never worked leaving ke to download the whole software through the software updater. Is it like only some updates are available OTA? 27. Uploaded the latest software update and the menu kind of fades out while navigating which is the only thing noticable. Did the update OTA. So won't say it doesn't work. The current version is 31.0.4 28. If a new message is received during the startup of the phone the new message popup keeps reappearing and the screen keeps switching on and off until the end call (red) button is pressed once. This also happens if the new message popup is ignored and the phone is re-started. 29. Battery has started to wear out, it shows full bars after putting it for charging from 2 bars just after 2 minutes of charging. I have to rely on the battery monitor application to know the actual amount of battery left. i bought the phone in August 2010. 30. Just loaded the new maps v3.06 which does not work at all. i mean it does show you search results but as soon as you ask it to navigate you to some place it shows a pop up "memory full, close some applications and try again later". It would have been fine if it stopped here but the phone switches off and restarts on its own which is rather frustrating and renders this application which was working fine, useless.

My complaint to Nokia which I send today as Nokia asked further clarification
Now waiting for their reply
I bought a new X6 16GB phone one weak before. Now the issue is scratchy sounds while playing music and ring tones via my phone's speakers and this is a factory defect piece. Now the real issue is I contacted Nokia care center(Thrissur, Kerala) 2 days before by phone and told the issue. The reply from them was really sad one.
(1) this is common issue with X6.
(2) it is a manufacturing defect with phone.
(3) IT can be solved by replacing speakers.
(4) In many cases it is not able to solve that simple in that case they will send phone to Delhi for replacing speakers as well as some sticker ( may be sound card).
And the most important issue is I got lot of reviews from others customers that once the phone is send to Delhi there is high chance of getting scratches on phone and overall shinning of phone will also be affected and I asked this concern to them and they replied that its a truth and they cannot assure those things and its very sad.
Please help me to solve this issue with out damaging my phone any more. And more over I cant afford to wait 14 days without phone because I desperately need it as part of my job and cant buy another phone for using 14 days.Please make some arrangements to repair it in my local town Thrissur because as your service centers have recognized that its a common issue.
Thanks and regards
Deepak Paroth
lets see wot happens

With the ISO 8, I'm getting FULL SIZE pictures identifying the caller. But only some, the others in my contacts are still TINY.

With the ISO 8, I'm getting FULLSIZE picture identifying the caller. But only some!
The others in my contact list still come as TINY. Is there a place where i can make them all full size?

Got the same issue ever since upgrading to Facebook for iPhone version 4.1 that was released a few days ago - let me know if you have any luck.

Web Conference - Invitations via Group Lists - Only some members see invite

1) Start a new conference via a browser.
2) Input invites - enter apac-ondemand-team-sg-grp
3) Only some members of the APAC-OnDemand-Team workspace can see the conference in the list. Most cannot.
Why can only some members of the workspace see the conference?
We checked to ensure that those members that could not see the conference were logged in.

Hi,
Do we have any difference between the users ? If you as a user create the conference and can see the other members to invite them then there should not be a difference.
Can you try inviting the users who cannot see the conference as members of the group as individuals - that way we can distinguish between group and user access issues if they can see it when invited personally but not when done as a group invite the issue may be in the group configuration.
Phil

RAM only some combinations? Issues...

Similar Messages

Maybe you are looking for