Ramdisk issue in Solaris 10

When I try to create a ramdisk I get the following error;
# ramdiskadm -a disk1 4g
ramdiskadm: couldn't create ramdisk "disk1": Resource temporarily unavailable
Has anyone seen this and how it was resolved.?
Thanks in advance
Ali

4 GB is too much compared to free memory on your system?

Similar Messages

Installation Issues on Solaris 10

Hi all,
I've tried several times to install Sun Java Platform Application Suite on Solaris 10, and each time after the installation finished, it shows the same issues. I'll attach the errant installation summary file and the critical part of the install log below.
If someone can point me in the right directiron or tell me where else to look for more details on what might be wrong. I'd appreciate it.
--Zhiyuan
==============================================================
Installation Summary Report
Install Summary
Java Enterprise System Application Platform Suite : Installed
Sun Java(TM) System Web Server 7.0 : Installed, Configured
Sun Java(TM) System High Availability Session Store 4.4 : Installed, Configured
Java DB : Installed, Configure After Install
Sun Java(TM) System Message Queue 3.7 UR1 : Installed
Sun Java(TM) System Application Server Enterprise Edition 8.2 : Installed, Configured
Sun Java(TM) System Monitoring Console 1.0 : Installed, Configure After Install
Sun Java(TM) System Directory Preparation Tool : Installed
Sun Java(TM) System Directory Server Enterprise Edition 6.0 : Installed, Configured
Sun Java(TM) System Access Manager 7.1 : Installed, Configuration Failed
Service Registry 3.1 : Installed, Configure After Install
Sun Java(TM) System Portal Server 7.1 : Installed, Configuration Failed
Sun Java(TM) System Portal Server Secure Remote Access 7.1 : Installed, Configuration Failed
Sun Java(TM) System Web Proxy Server 4.0.4 : Installed, Configured
Configuration Data
Sun Java(TM) System Web Server 7.0 :
Web Server Instance installation Directory : /peg/var/opt/SUNWwbsvr7
Web Server installation Directory : /peg/opt
Web Server Administration Server Host : hzhsd050.statestr.com
Web Server Admin Server Mode : true
Web Server only CLI installation : false
Sun Java(TM) System Application Server Enterprise Edition 8.2 :
Domains and Instance Configuration Directory : /peg/var/opt/SUNWappserver
Application Server Installation Directory : /peg/opt/SUNWappserver
Sun Java(TM) System Directory Preparation Tool :
Directory Preparation Tool Installation Directory : /peg/opt/SUNWcomds
Sun Java(TM) System Directory Server Enterprise Edition 6.0 :
Directory Server Installation Directory : /peg/opt/SUNWdsee
Sun Java(TM) System Access Manager 7.1 :
Access Manager Installation Directory : /peg/opt
Access Manager Protocol : http
Access Manager Port : 8080
LDAP User ID : amldapuser
Administrator User ID : amAdmin
Web Container : AppServer
Access Manager Application Server Installation Directory : /peg/opt/SUNWappserver/appserver
Document Root : /peg/var/opt/SUNWappserver/domains/domain1/docroot
Access Manager Console Host (for Existing console) : hzhsd050.statestr.com
Access Manager Console Deploy URI : amconsole
Access Manager Password Deploy URI : ampassword
Access Manager Host : hzhsd050.statestr.com
Access Manager Console Port(for Existing console) : 8080
Access Manager Services Deploy URI : amserver
Access Manager Cookie Domain List : .statestr.com
Access Manager Common Domain Deploy URI : amcommon
Access Manager Directory Server Host Name : hzhsd050
Access Manager Directory Server Host : hzhsd050.statestr.com
Access Manager Directory Server Port : 389
Access Manager Directory Root Suffix : dc=statestr,dc=com
Access Manager Directory Manager DN : cn=Directory Manager
Organization Marker Object Class : sunISManagedOrganization
User Marker Object Class : inetorgperson
Organization Naming Attribute : o
User Naming Attribute : uid
Service Registry 3.1 :
Service Registry Installation Directory : /peg/opt
Sun Java(TM) System Portal Server 7.1 :
PS Install Base Directory : /peg/opt
JDK Install Directory : /usr/jdk/entsys-j2se
Web Container Type : SUNONE8
Web Container Install Directory : /peg/opt/SUNWappserver/appserver
Web Container Domain Directory : domain1
Web Container Instance : server
Web Container Document Root Directory : /peg/var/opt/SUNWappserver/domains/domain1/docroot
Web Container Administrator : admin
Web Container Administration Protocol : https
Web Container Administration Host : hzhsd050.statestr.com
Web Container Administration Port : 4849
Directory Server Host : hzhsd050.statestr.com
Directory Server Port : 389
Directory Manager DN : cn=Directory Manager
Access Manager Install Base Directory : /peg/opt
Access Manager Service Deployment URI : /amserver
Access Manager Console Deployment URI : /amconsole
Organization DN : dc=statestr,dc=com
Access Manager Password Key : lyF6/3TrMapDb3ghHMsdO1+nxruRO4ZT
EntSysResources:PS_DEPLOY_NOW : y
Install Sample Portal(s)? : true
EntSysResources:SRA_SWITCH_CORE : true
Portal Access URL (protocol://host:port/portal/dt) : http://hzhsd050.statestr.com:8080/portal
Portal ID : portal1
Search ID : search1
Sun Java(TM) System Portal Server Secure Remote Access 7.1 :
SRA Install Base Directory : /peg/opt
Access Manager Service Deployment URI : /amserver
Organization DN : dc=com
Create a new web container instance? : y
Server Protocol : http
Server Domain : statestr.com
Gateway Protocol : https
Gateway Domain : statestr.com
Gateway Port : 443
Gateway Profile : default
Gateway Protocol : https
Gateway Host Name : hzhsd050
Gateway Domain : statestr.com
Gateway Port : 443
Gateway IP Address : 10.248.38.82
Gateway Profile : default
Netlet Proxy Host Name : hzhsd050
Netlet Proxy Domain : statestr.com
Netlet Proxy Port : 10555
Netlet Proxy IP Address : 10.248.38.82
Netlet Proxy Gateway Profile : default
Rewriter Proxy Host Name : hzhsd050
Rewriter Proxy Domain : statestr.com
Rewriter Proxy Port : 10443
Rewriter Proxy IP Address : 10.248.38.82
Rewriter Proxy Gateway Profile : default
Certificate Organization : SSTC
Certificate Division : Software
Certificate City : Hangzhou
Certificate State : Zhejiang
Certificate Country : CN
Sun Java(TM) System Web Proxy Server 4.0.4 :
Web Proxy Server installation Directory : /peg/opt/SUNWproxy
Web Proxy Server Administration Server User Name : admin
Web Proxy Server Administration Server Port : 8888
Web Proxy Server Server Instance Port : 8081
Web Proxy Server Server Instance - Start on reboot : Y
The configuration log is saved in : /var/sadm/install/logs/JavaES_Install_log.1652367220
===========================================================
*** Start configuring PortalServer... ***
|#]
[#|2007-08-22T11:15:39+08:00|INFO|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=;_SourceMethodName=;_JavaESMessageID=;_JavaESResourceBundle=EntSysLoggingResources|Configuration Class name class com.sun.entsys.installer.portalserv.config.PortalServerConfigurator|#]
[#|2007-08-22T11:15:39+08:00|FINE|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=PortalServerConfigurator;_SourceMethodName=configure();_JavaESMessageID=JavaES_ConfigIS09;_JavaESResourceBundle=EntSysLoggingResources|Entering Method|#]
[#|2007-08-22T11:15:39+08:00|FINE|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=PortalServerConfigurator;_SourceMethodName=getSelectedPortalSRAComponents();_JavaESMessageID=JavaES_ConfigIS09;_JavaESResourceBundle=EntSysLoggingResources|Entering Method|#]
[#|2007-08-22T11:15:39+08:00|FINE|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=PortalServerConfigurator;_SourceMethodName=getSelectedPortalSRAComponents();_JavaESMessageID=JavaES_ConfigIS10;_JavaESResourceBundle=EntSysLoggingResources|Exiting Method|#]
[#|2007-08-22T11:15:39+08:00|INFO|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=PortalServerConfigurator;_SourceMethodName=configure();_JavaESMessageID=JavaES_ConfigPS02;_JavaESResourceBundle=EntSysLoggingResources;_JavaESArg1=[PortalServer, PortalServerL10n, SRACore, PortalSRAL10n, PortalSRANetletL10n, SRAGateway, SRANetletProxy, SRARewriterProxy]|Selected Components List = '&5B;PortalServer, PortalServerL10n, SRACore, PortalSRAL10n, PortalSRANetletL10n, SRAGateway, SRANetletProxy, SRARewriterProxy&5D;'|#]
[#|2007-08-22T11:15:39+08:00|INFO|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=PortalServerConfigurator;_SourceMethodName=configure();_JavaESMessageID=JavaES_ConfigPS03;_JavaESResourceBundle=EntSysLoggingResources;_JavaESArg1=[PortalServer]|Configuration for '&5B;PortalServer&5D;' is deferred...|#]
[#|2007-08-22T11:15:39+08:00|CONFIG|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=EntsysConfigurator;_SourceMethodName=performConfiguration(compID, configParams);_JavaESMessageID=JavaES_Config0006;_JavaESResourceBundle=EntSysLoggingResources;_JavaESArg1=PortalServer|Configuration succeeded for PortalServer|#]
[#|2007-08-22T11:15:39+08:00|INFO|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=ConfigLeaf;_SourceMethodName=install(WizardState);_JavaESMessageID=JavaES_Config0002;_JavaESResourceBundle=EntSysLoggingResources;_JavaESArg1=PortalServer|
*** End configuring PortalServer ***
Command /peg/opt/SUNWportal/bin/psconfig generated the follwing outputs:
|#]
[#|2007-08-22T11:18:10+08:00|CONFIG|JavaES|JavaESInstall|_versionID=1.0;_threadID=11;_SourceJavaFile=EntsysConfigurator;_SourceMethodName=executeCmd(cmdArray);_JavaESMessageID=;_JavaESResourceBundle=|
Successfully created PSConfig.properties file
Copying config templates from: /peg/opt/SUNWportal/template/config
Successfully created PortalDomainConfig.properties file
Validating the Input Config XML File|#]
[#|2007-08-22T11:18:10+08:00|WARNING|JavaES|JavaESInstall|_versionID=1.0;_threadID=11;_SourceJavaFile=EntsysConfigurator;_SourceMethodName=executeCmd(cmdArray);_JavaESMessageID=;_JavaESResourceBundle=|
Configuration Failed : For input string: "DIRECTORY_PORT"|#]
[#|2007-08-22T11:18:10+08:00|FINE|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=PortalServerConfigurator;_SourceMethodName=stopRequiredServers();_JavaESMessageID=JavaES_ConfigIS09;_JavaESResourceBundle=EntSysLoggingResources|Entering Method|#]
[#|2007-08-22T11:18:25+08:00|INFO|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=EntsysConfigurator;_SourceMethodName=executeCmd(cmd,envp,dir);_JavaESMessageID=JavaES_Config0010;_JavaESResourceBundle=EntSysLoggingResources;_JavaESArg1=/peg/opt/SUNWappserver/appserver/bin/asadmin stop-domain domain1|
ldapsearch tool not found at /opt/SUNWdsee/dsee6/bin/ldapsearch
Exiting the install script|#]
[#|2007-08-22T11:11:26+08:00|SEVERE|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=IdentityServConfigurator;_SourceMethodName=configure();_JavaESMessageID=JavaES_ConfigIS24;_JavaESResourceBundle=EntSysLoggingResources;_JavaESArg1=2|Access Manager Configuration Failed ...2|#]
[#|2007-08-22T11:11:27+08:00|FINE|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=IdentityServConfigurator;_SourceMethodName=configure();_JavaESMessageID=JavaES_ConfigIS10;_JavaESResourceBundle=EntSysLoggingResources|Exiting Method|#]
[#|2007-08-22T11:11:31+08:00|CONFIG|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=EntsysConfigurator;_SourceMethodName=generatePasswdFile(fileName, keys, passwds;_JavaESMessageID=JavaES_Config0016;_JavaESResourceBundle=EntSysLoggingResources;_JavaESArg1=asadPFile|Creating password file: asadPFile|#]
[#|2007-08-22T11:11:32+08:00|CONFIG|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=EntsysConfigurator;_SourceMethodName=generatePasswdFile(fileName, keys, passwds;_JavaESMessageID=JavaES_Config0017;_JavaESResourceBundle=EntSysLoggingResources;_JavaESArg1=/var/tmp/asadPFile45261tmp|Successfully Created password file: /var/tmp/asadPFile45261tmp|#]
[#|2007-08-22T11:11:47+08:00|INFO|JavaES|JavaESConfig|_versionID=1.0;_threadID=11;_SourceJavaFile=EntsysConfigurator;_SourceMethodName=executeCmd(cmd,envp,dir);_JavaESMessageID=JavaES_Config0010;_JavaESResourceBundle=EntSysLoggingResources;_JavaESArg1=/peg/opt/SUNWappserver/appserver/bin/asadmin stop-domain --domaindir /peg/var/opt/SUNWappserver/domains domain1|
/////////////////////////////////////

Hi Philippe,
Thanks for your reply.
I installed the whole suite including directory server in a non-defaut install directory. I am wondering if changing install directory will cause issues.
--Zhiyuan

OBIEE 11g (11.1.1.5) installation issue on solaris 10

Hello all
I am trying to install OBIEE 11g (11.1.1.5) on solaris 10 and i am facing the following issue once i run the "./runInstaller"
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 1536 MB. Actual 53110 MB Passed
Checking swap space: must be greater than 500 MB. Actual 63528 MB Passed
Checking monitor: must be configured to display at least 256 colors
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,
Continue? (y/n) [n] y
Ignoring required pre-requisite failures. Continuing...Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-12-02_11-38-43AM. Please wait ...Error in CreateOUIProcess(): 22
: Invalid argument
-bash-3.00$
Even if i run the command "./runInstaller -silent" am facing the following issue
-bash-3.00$ ./runInstaller -silent
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 1536 MB. Actual 52789 MB Passed
Checking swap space: must be greater than 500 MB. Actual 63521 MB Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-12-02_12-22-37PM. Please wait ...Error in CreateOUIProcess(): 22
: Invalid argument
Please let me know how to fix this issue?
Thank you

hi
Still facing the same error after all the prerequisites are passed
Checking Temp space: must be greater than 1536 MB.   Actual 17419 MB    Passed
Checking swap space: must be greater than 500 MB.   Actual 68344 MB    Passed
Checking monitor: must be configured to display at least 256 colors.    Actual 65536    Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-12-05_12-38-33PM. Please wait ...Error in CreateOUIProcess(): 22
: Invalid argument
Please let me know if am missing something here?
Thanks

Sendmail issue on Solaris 10 system...

I have two systems running Solaris 10 that are having sendmail issues. If mail messages like the one below gets bounced back or if someone replies to it, the message will go to [email protected], and that should not happen. I believe I configured these systems the same way as the others and they seem to be fine. I have reconfigured the sendmail on the problems systems and I am still seeing messages going to [email protected] Below is what our reports should be sending to us and below that is what we should not be sending. How do I fix this problem? Can someone help, please. Thanks.
CORRECT:
-----Original Message-----
From: root@nunode7 [mailto:[email protected]]
Sent: Monday, December 11, 2006 0:04
To: [email protected]
Subject: Daily Security Report
Begin report of failed attempts to 'su' for nunode7 on Sun Dec 10 2006
No failed attempts to report
End report of failed attempts to 'su' for nunode7 on Sun Dec 10 2006
INCORRECT:
-----Original Message-----
From: root@nunode15 [mailto:[email protected]]
Sent: Tuesday, December 12, 2006 0:01
To: [email protected]
Subject: Daily Security Report
Begin report of failed attempts to 'su' for nunode15 on Mon Dec 11 2006
No failed attempts to report
End report of failed attempts to 'su' for nunode15 on Mon Dec 11 2006
---------------------------------------------------------------------

So far it is happening for root. What do you suggest I do to fix it?
Below is an example of what I have been seeing. If you look at "To", you will see where the problem is..."relay" should not be there. The host name should not be there either as the masquerading configuration is set up. Something is causing "relay" to appear and I cant seem to find what it is.
-----Original Message-----
From: [email protected]
Sent: Friday, September 29, 2006 14:59
To: [email protected]
Subject: File Structures on node
Message was edited by:
DCMetroSunAdmin

Sendmail issue on solaris 10

Hi,
I am getting the following logs frequently on my solaris 10 server.
Jun 30 16:52:01 <servername> sendmail[20814]: [ID 801593 mail.info] m5UFq10v020814: from=metron, size=536, class=0, nrcpts=1, msgid=<200806301552.m5UFq10v0208
14@<servername>.>, relay=metron@localhost
Jun 30 16:52:01 <servername> sendmail[20814]: [ID 801593 mail.info] m5UFq10v020814: to=metron, ctladdr=metron (104/4), delay=00:00:00, xdelay=00:00:00, mailer
=relay, pri=30536, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
Jun 30 16:54:01 <servername> sendmail[21265]: [ID 801593 mail.info] m5UFs0KJ021265: from=metron, size=536, class=0, nrcpts=1, msgid=<200806301554.m5UFs0KJ0212
65@<servername>.>, relay=metron@localhost
Could you please geve me an idea about the issue.
Thanks in advance.

So far it is happening for root. What do you suggest I do to fix it?
Below is an example of what I have been seeing. If you look at "To", you will see where the problem is..."relay" should not be there. The host name should not be there either as the masquerading configuration is set up. Something is causing "relay" to appear and I cant seem to find what it is.
-----Original Message-----
From: [email protected]
Sent: Friday, September 29, 2006 14:59
To: [email protected]
Subject: File Structures on node
Message was edited by:
DCMetroSunAdmin

Mail Issue in Solaris 10

Hi,
I wanted to send mails from my solaris box. Below is the step i used
# svcs | grep mail
# svcadm enable smtp
# svcs | grep mail
online 14:24:58 svc:/network/smtp:sendmail
# mail -s "HELLO" [email protected]
Nothing happens after this... i tried with different mail id's and different mail servers but all failed.
can someone help me in troubleshooting this issue?
Regards,
Ashok Kumar.G

Hi Chris & Darren,
Thanks for your updates. Currently i have resolved the issue and i am able to send mail to gmail & yahoo accounts. The issue was with my domain name present in /etc/hosts file and settings in /etc/nsswitch.conf file.
But i am unable to send any mail's to my company's POP3 mail server email accounts.
# mailq
/var/spool/mqueue is empty
Total requests: 0
# grep DS* /etc/mail/sendmail.cf
##### SENDMAIL CONFIGURATION FILE
##### DO NOT EDIT THIS FILE! Only edit the source .mc file.
#O DontBlameSendmail=safe
# default LDAP map specification
# need to set this now before any LDAP maps are defined
#O LDAPDefaultSpec=-h localhost
# my LDAP cluster
# need to set this before any LDAP lookups are done (including classes)
#D{sendmailMTACluster}$m
#Dj$w.Foo.COM
DS
DnMAILER-DAEMON
CPREDIRECT
DZ8.13.8
O DeliveryMode=background
#O IgnoreDots=False
#O HostStatusDirectory=.hoststat
# single thread deliveries (requires HostStatusDirectory)?
#O SingleThreadDelivery=False
O DaemonPortOptions=Name=MTA-v4, Family=inet
O DaemonPortOptions=Name=MTA-v6, Family=inet6
O DaemonPortOptions=Port=587, Name=MSA, M=E
#O DirectSubmissionModifiers
O QueueDirectory=/var/spool/mqueue
# time for DeliverBy; extension disabled if less than 0
#O DeliverByMin=0
#O DontPruneRoutes=False
# default UID (can be username or userid:groupid)
#O DefaultUser=mailnull
#O UserDatabaseSpec=/etc/mail/userdb
#O DelayLA=0
#O MaxDaemonChildren=0
#O DefaultCharSet=unknown-8bit
#O DialDelay=0s
#O DontExpandCnames=False
#O DontInitGroups=False
#O DoubleBounceAddress=postmaster
#O DeadLetterDrop=/var/tmp/dead.letter
#O DontProbeInterfaces=False
# Return-Receipt-To: header implies DSN request
#O RrtImpliesDsn=False
# Data file (df) memory-buffer file maximum size
#O DataFileBufferSize=4096
#O MailboxDatabase=pw
# override compile time flag REQUIRES_DIR_FSYNC
#O RequiresDirfsync=true
#O AuthMechanisms=EXTERNAL GSSAPI KERBEROS_V4 DIGEST-MD5 CRAM-MD5
#O DefaultAuthInfo=/etc/mail/default-auth-info
# DHParameters (only required if DSA/DH is used)
#O DHParameters
# QUEUE GROUP DEFINITIONS #
H?D?Resent-Date: $a
H?D?Date: $a
# HPosted-Date: $a
# H?l?Received-Date: $b
# addresses sent to [email protected] will give a 551 error code
R$* < @ $+ .REDIRECT. > $: $1 < @ $2 . REDIRECT . > < ${opMode} >
R$* < @ $+ .REDIRECT. > <i> $: $1 < @ $2 . REDIRECT. >
R$* < @ $+ .REDIRECT. > < $- > $#error $@ 5.1.1 $: "551 User has moved; please try " <$1@$2>
# handle non-DNS hostnames (*.bitnet, *.decnet, *.uucp, etc)
R<TEMP> $* $#error $@ 4.1.8 $: "451 Domain of sender address " $&f " does not resolve"
R<PERM> $* $#error $@ 5.1.8 $: "553 Domain of sender address " $&f " does not exist"
R<FORGED> $#error $@ 5.7.1 $: "550 Relaying denied. IP name possibly forged " $&{client_name}
##### MAIL FILTER DEFINITIONS
##### MAILER DEFINITIONS
R$+ $: $>AddDomain $1 add local domain if needed
R$+ $: $>AddDomain $1 add local domain if needed
R$+ $: $>AddDomain $1 add local domain if needed
SAddDomain
Mlocal, P=/usr/lib/mail.local, F=lsDFMAw5:/|@qPSXmnz9, S=EnvFromSMTP/HdrFromL, R=EnvToL/HdrToL,
T=DNS/RFC822/SMTP,
Mprog, P=/bin/sh, F=lsDFMoqeu9, S=EnvFromL/HdrFromL, R=EnvToL/HdrToL, D=$z:/,
Msmtp, P=[IPC], F=mDFMuX, S=EnvFromSMTP/HdrFromSMTP, R=EnvToSMTP, E=\r\n, L=990,
T=DNS/RFC822/SMTP,
Mesmtp, P=[IPC], F=mDFMuXa, S=EnvFromSMTP/HdrFromSMTP, R=EnvToSMTP, E=\r\n, L=990,
T=DNS/RFC822/SMTP,
Msmtp8, P=[IPC], F=mDFMuX8, S=EnvFromSMTP/HdrFromSMTP, R=EnvToSMTP, E=\r\n, L=990,
T=DNS/RFC822/SMTP,
Mdsmtp, P=[IPC], F=mDFMuXa%, S=EnvFromSMTP/HdrFromSMTP, R=EnvToSMTP, E=\r\n, L=990,
T=DNS/RFC822/SMTP,
Mrelay, P=[IPC], F=mDFMuXa8, S=EnvFromSMTP/HdrFromSMTP, R=MasqSMTP, E=\r\n, L=2040,
T=DNS/RFC822/SMTP,
nslookup MYMAILSERVERIP
# nslookup MYMAILSERVERIP
Server: 203.208.224.91
Address: 203.208.224.91#53
Non-authoritative answer:
36.6.127.203.in-addr.arpa name = mail.XXXX.com.
Authoritative answers can be found from:
6.127.203.in-addr.arpa nameserver = dnssec2.singnet.com.sg.
6.127.203.in-addr.arpa nameserver = dnssec3.singnet.com.sg.
6.127.203.in-addr.arpa nameserver = dnssec1.singnet.com.sg.
dnssec1.singnet.com.sg internet address = 165.21.83.11
dnssec2.singnet.com.sg internet address = 195.13.10.226
dnssec3.singnet.com.sg internet address = 165.21.100.11
nslookup mailhost.OLAMNET.COM
# nslookup OLMXDB.OLAMNET.COM
Server: 203.208.224.91
Address: 203.208.224.91#53
** server can't find OLMXDB.OLAMNET.COM: NXDOMAIN
Please advice...!!!
Regards,
Ashok Kumar.G

German character set issues on Solaris

Hi,
I am facing an issue with German character settings with my Java application on a solaris box.
When I run my application on the box, and I pass an input file with German special characters they get converted as ?. However, other normal English characters are formed properly.
When I run the same application on another Solaris box with a different JRE, the German characters are formed properly.
I understand that there is a difference in the archiecture between the 2 boxes ie.e
64 bit SPARC machine v/s 32 bit x86 machine
the JRE
1.4.2_03(64bit) v/s 1.4.1_01
I am tryinbg to evaludate further differences between the 2 environments to pinpoint the issue, and get this resolved on the 1st box.
Can anyone provide me any inputs?
Lavin

When you read the file, please point out what character set using. For example:
FileInputStream fstream = new FileInputStream(url.getFile());
DataInputStream in = new DataInputStream(fstream);
BufferedReader br = new BufferedReader(new InputStreamReader(in, Charset.forName("ISO-8859-1")));
br.readLine();
This link possibly can help you.
http://www.velocityreviews.com/forums/t126128-jdk-14-character-set-change.html

Mutex locking issue on Solaris 10

We are having a problem with mutex locking.
On one scenario we are running our application
On a v245 running Solaris 10 6/06 update 2 patch 118833-24
On our 5120 we are running Solaris 10 8/07 update 4patch 137111-05.
Our application creates several thousand simultaneous mutex inits (pthread_mutex_init). Approx 12 are locked at any one time. Our problem is after several min the application fails because the mutex destroy does not appear to destroy the mutex. This is true only on our 5120 but not on our v245. As a result our application runs fine on the v245 but fails quickly on the 5120.
Do you have any knowledge of why this might be happening?
Any help you can provide in this will be greatly appreciated.
If this is not the right group to post this messages please let me know.
Thanks!

How many threads do you have performing these mutex operations? The 5120 probably runs a lot more concurrent threads than the v245 does, so it's likely you're running into a race condition that's only apparent when the number of concurrent threads is large enough.
What kind of mutexes are they? Recursive, process-shared, "normal"? Where are they located? Dynamically-allocated heap memory, local stack variables, mmap()'d memory? If they're recursive or "normal" mutexes in heap memory, you've most likely got a race condition in your application, because the source code at opensolaris.org for pthread_mutex_destroy() is pretty much nothing but "memset( &mutex, 0, sizeof( mutex ) )" for normal mutexes. It's hard to imagine how that could fail.
You can use the race-condition tools that are part of Sun Studio 12 or another memory-checking application such as Purify to find out where your error may be. Given the timing issues apparently involved, those are probably your best options. The overhead of tools such as watchmalloc or even the run-time memory checker in Sun Studio may be too much and mask your timing issues. Assuming that's what the root cause of your problem is.
I didn't look at what's involved in destroying a process-shared mutex, though. That's a lot more complicated.
On edit: How do you know that pthread_mutex_destroy() is not destroying the mutex?
Edited by: AndrewHenle on Jun 16, 2009 3:46 PM

Opatch Issue on Solaris 10

I am having a bit of an issue using the opatch command; for some reason, it's not returning the desired output. All I keep getting is a "OPatch succeeded" response. I can't even confirm the Java version installed; when I execute the java command, I do not get any response. Any ideas why this may be so?
Opatch command out is below.
bash-3.00$ ./opatch lsinventory
OPatch succeeded.
bash-3.00$ ./opatch -help
OPatch succeeded.Java command returns nothing.
bash-3.00$ $ORACLE_HOME/jdk/bin/java -fullversion
bash-3.00$Our Database and OS setup is as below.
SQL> select * from v$version
2 /
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE    10.2.0.4.0      Production
TNS for Solaris: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
SQL>
bash-3.00$ cat /etc/release
                       Solaris 10 8/07 s10s_u4wos_12b SPARC
           Copyright 2007 Sun Microsystems, Inc. All Rights Reserved.
                        Use is subject to license terms.
                            Assembled 16 August 2007Regards,
Phiri

>
Pl post details of OS and Opatch versions. The PATH variable needs to include the OPatch directory.
>
I do not get any response when I issue the command to show me the version of Opatch; see below.
bash-3.00$ pwd
/disk1/oracle/ora10g/product/OPatch
bash-3.00$ ./opatch version
OPatch succeeded.
bash-3.00$Adding OPatch to the PATH does not yield anything either.
bash-3.00$ PATH=$PATH:/disk1/oracle/ora10g/product/OPatch
bash-3.00$ cd
bash-3.00$ op
opatch         opatch.bat     opatchprereqs openjade       openssl        optisa
bash-3.00$ pwd
/disk1/oracle
bash-3.00$ opatch version
OPatch succeeded.
bash-3.00$OS details are below.
                       Solaris 10 8/07 s10s_u4wos_12b SPARC
           Copyright 2007 Sun Microsystems, Inc. All Rights Reserved.
                        Use is subject to license terms.
                            Assembled 16 August 2007Regards,
Phiri

Bash issue on solaris 8 ( Segmentation fault for non root users)

Hi,
This is solaris 8 on sparc and a NFS file server for the NIS+ environment. As supposed to be this file server is nis+ client.
Now this issue happens only sometimes and goes away on its own but it did not this time.
I connect to file server using ssh, system closes my session,
this is ssh -vvv log , copied here : http://pastebin.ca/1633893Please note that my shell is /bin/bash. It worked 99% time but not now, nothing is changed on system.
If I ssh root@fileserver then ssh connection works fine. root can also run bash command. and run other commands in bash
For a normal user with csh if the user tries "bash" , then gets
user@fileserver%> bash
Segmentation Fault
I am thinking this is somewhere related to rpc but I do not see any errors on nis+ server nor on fileserver.
%>truss bash o/p is here :
http://pastebin.ca/1633907Please let me know what is this issue related to. If by stopping/restarting a process helps that would be great.
one more thing to note is, other nis+ clients can mount shares from this fileserver properly and authentication also works fine on them even for users with /bin/bash shell and bash does work manually also.
If you need any other info, please let me know
Please help!
Thanks!

Anyone any idea? I thought the truss o/p copied in pastebin might be very useful
Additional info, for someone with /bin/tcsh as shell, when su - <user> from root account, following messages come up
free(4b31688) bad block. (memtop = 4b7e400 membot = 9c9a0)
free(4b31688) bad block. (memtop = 4b7e400 membot = 9c9a0)
free(4b316c8) bad block. (memtop = 4b7e400 membot = 9c9a0)
free(4b316c8) bad block. (memtop = 4b7e400 membot = 9c9a0)
free(4b31448) bad block. (memtop = 4b7ec00 membot = 9c9a0)
free(4b31448) bad block. (memtop = 4b7ec00 membot = 9c9a0)
free(49fca08) bad block. (memtop = 4b7f400 membot = 9c9a0)
free(49fca08) bad block. (memtop = 4b7f400 membot = 9c9a0)$ truss -f -t stat,open /bin/bash
http://pastebin.ca/1635134

Logrot.pl (v.4.4) issue on solaris 9

logrot.pl does not check diskspace before doing a copy process of syslog_info; if there is not enough space, the copy process fails and the content of syslog_log is lost;
I know, that the error handling of such a script cannot take respect on each and every possible error that could appear but in case of the syslog file I would say it is such an essential file that it would be great that the loss of the content could be avoided.
currently I am unable to test if this issue is present in the current version but I found it to be valid in LMS 3.2 on solaris 9; here is the confiuration of logrot.pl
/var/log is configured as the backup directory,
/var/log/syslog_info is configured to be backed up
it seems when starting logrot.pl it first tries to copy syslog_info
the copy process fails due to /var being 100% in use
bash-2.05# /opt/CSCOpx/bin/logrot.pl -c
Read config successfully.
Logrot Configuration Menu
1. Edit variables
2. Edit log files
3. Quit and save changes
4. Quit without saving changes
Enter option: 1
Number Variable Name                    [Variable Value]
1.     Backup Directory                 [/var/log]
2.     Restart Delay                    [60]
q.     Go back
Enter variable number to change: q
Logrot Configuration Menu
1. Edit variables
2. Edit log files
3. Quit and save changes
4. Quit without saving changes
Enter option: 2
Number Logfile Name                     Number of Archives Max Size Compress
1.     /var/log/syslog_info             13                 1024     gz
a.     Add logfile(s)
d.     Delete logfile(s)
q.     Go back
Enter option or logfile number to edit: q
Logrot Configuration Menu
1. Edit variables
2. Edit log files
3. Quit and save changes
4. Quit without saving changes
Enter option: 4
bash-2.05#
===============================================================
===============================================================
bash-2.05# /opt/CSCOpx/bin/perl /opt/CSCOpx/bin/logrot.pl
cp: /var/log/syslog_info.12.gz: No space left on device
cp: /var/log/syslog_info.0: No space left on device
Wed Jun 8 16:44:03 2011: WARNING: Unable to archive /var/log/syslog_info: No such file or directory
gzip: /var/log/syslog_info.0: No such file or directory
Wed Jun 8 16:44:03 2011: WARNING: Unable to compress /var/log/syslog_info.0: 256
bash-2.05#
bash-2.05# cd /var/log/
bash-2.05# ls -al
total 769616
drwxr-xr-x   2 root     sys         1536 Jun 8 16:44 .
drwxr-xr-x 38 root     root        1024 Sep 24 2010 ..
-rw-------   1 root     sys            0 Jul 27 2005 authlog
-rw-r--r--   1 root     other     372880 Jun 8 02:00 cmMapShare.log
-rw-r--r--   1 root     other        838 Mar 22 2006 sysidconfig.log
-rw-r--r--   1 root     other        884 Jun 8 04:00 syslog
-rw-r--r--   1 root     other      17392 Jun 7 01:00 syslog.0
-rw-r--r--   1 root     other      17299 Jun 1 01:00 syslog.1
-rw-r--r--   1 root     other      16107 May 25 01:00 syslog.2
-rw-r--r--   1 root     other      15908 May 18 01:00 syslog.3
-rw-r--r--   1 root     other      16249 May 11 01:00 syslog.4
-rw-r--r--   1 root     other      17047 May 4 01:00 syslog.5
-rw-r--r--   1 root     other      15908 Apr 27 01:00 syslog.6
-rw-r--r--   1 root     other      15912 Apr 20 01:00 syslog.7
-rw-rw-r--   1 root     sys            0 Jun 8 16:44 syslog_info
-rw-rw-r--   1 root     sys      16485733 Sep 1 2010 syslog_info.0.gz
-rw-rw-r--   1 root     sys      16485733 Sep 1 2010 syslog_info.1.gz
-rw-rw-r--   1 root     sys      19319177 Dec 1 2009 syslog_info.10.gz
-rw-rw-r--   1 root     sys      87397723 Nov 3 2009 syslog_info.11.gz
-rw-rw-r--   1 root     sys      84321257 Oct 5 2007 syslog_info.2.Z.old
-rw-rw-r--   1 root     sys      20818106 Aug 1 2010 syslog_info.2.gz
-rw-rw-r--   1 root     sys      23242884 Jul 1 2010 syslog_info.3.gz
-rw-rw-r--   1 root     sys      19556306 Jun 1 2010 syslog_info.4.gz
-rw-rw-r--   1 root     sys      18299543 May 1 2010 syslog_info.5.gz
-rw-rw-r--   1 root     sys      21785629 Apr 1 2010 syslog_info.6.gz
-rw-rw-r--   1 root     sys      21120869 Mar 1 2010 syslog_info.7.gz
-rw-rw-r--   1 root     sys      23420015 Feb 1 2010 syslog_info.8.gz
-rw-rw-r--   1 root     sys      20852151 Jan 1 2010 syslog_info.9.gz
bash-2.05
before this action syslog_info was about 3 Gig

Would it be sufficient to change the warning about archival to an error to make it fatal?

Login issue with solaris 10

I m facing a problem with login to solaris 10
at time of login its showing ttymon: tmchild: exec service failed
i m not able to access this machine because of this.
Any one has any solution to this problem?

Originally Posted by jerryrpiper
I have several HP/Compaq computers that are P4 2.4 Ghz with 512 meg of ram on the computers. The issue has to do with login. If I have a user that rebooted the computer and another user will login after that user the computer ask for the local workstation user name and password. I have tried this on my Dell computers and Brand new HP computer's and have no problems with them. Has any one come across this type of problem. This only happens on the S-510 and 530 models.
One thought...: Possibly a old Novell client installed on those models... I remember having an issue with users having to open the advanced login options, goto the windows login box. There the previous logged in user name needed to be cleared and login would be transparent again.

DAC Server to DB Server Connection issue on Solaris 10

Hi,
I have a connection issue that has me completely miffed as to what is going on.
We have a Oracle DAC Server running on Solaris 10 that connects to the DAC repository inside a database on another host also running on Solaris 10. When I try and build a DAC execution plan I get an error where I unable to complete the build due to by repository connection being lost. Looking at the DAC logs you can see multiple entries of
32231 INFO Tue Oct 15 10:04:05 BST 2013 CONNECTION_ISSUE Repository ending polling
32232 INFO Tue Oct 15 10:09:05 BST 2013 CONNECTION_ISSUE Repository ending polling
32233 INFO Tue Oct 15 10:14:05 BST 2013 CONNECTION_ISSUE Repository ending polling
32234 INFO Tue Oct 15 10:19:05 BST 2013 CONNECTION_ISSUE Repository ending polling
32235 INFO Tue Oct 15 10:24:05 BST 2013 CONNECTION_ISSUE Repository ending polling
Then eventually you see connection lost.
When I check the DB host using dmesg I notice the following entry over and over
Oct 15 11:00:53 v10emsu101 nxge: [ID 339653 kern.notice] NOTICE: nxge3: xcvr addr:0x0a - link is up 1000 Mbps full duplex
Oct 15 11:01:00 v10emsu101 nxge: [ID 339653 kern.notice] NOTICE: nxge1: xcvr addr:0x0c - link is up 1000 Mbps full duplex
Oct 15 11:05:53 v10emsu101 nxge: [ID 339653 kern.notice] NOTICE: nxge3: xcvr addr:0x0a - link is up 1000 Mbps full duplex
Oct 15 11:11:00 v10emsu101 nxge: [ID 339653 kern.notice] NOTICE: nxge1: xcvr addr:0x0c - link is up 1000 Mbps full duplex
Oct 15 11:15:53 v10emsu101 nxge: [ID 339653 kern.notice] NOTICE: nxge3: xcvr addr:0x0a - link is up 1000 Mbps full duplex
There is no entry for the link going down just up all the time. The timing in the logs match with the DAC logs which makes my think this is where the issue may lie.
root@v10emsu101 # dladm show-dev
bge0            link: up        speed: 1000 Mbps       duplex: full
bge1            link: unknown   speed: 0     Mbps       duplex: unknown
nxge0           link: up        speed: 1000 Mbps       duplex: full
nxge1           link: up        speed: 1000 Mbps       duplex: full
nxge2           link: up        speed: 1000 Mbps       duplex: full
nxge3           link: up        speed: 1000 Mbps       duplex: full
Does anyone have any idea on why this keeps occurring or can it safely be ignored?

Did you find a solution to your problem? It sounds like something we are experiencing.

Gnome panel issue in solaris 10 - help

Hello ,
I have here solaris 10 (137111-01) on sunblade 1500 machine ( total 50 machines). There is a strange problem appearing since this week, when a user logs into JDE(gnome DE) then users gets logged in but gnome-panel does not show anything. If PID for gnome-panel is killed, gnome-panel restarts but again it is blank ( grayed out)
The above issue new and only for nis+ users whose home directories get auto mounted from solaris nfs servers. Let me say here that it worked fine until now for these nis+ users but now. They are forced to use common desktop env which they don't like.
Local user such as root or any other local use gets the gnome-panel with start menu and everything works fine for it.
I have tried restarting nis+ services as well as nfs.server service and rebooting the nis+ clients which have the issue but still hasn't helped it.
Somehow I managed to set panel preference to Normal (from Restart) and then killed the Panel PID. Started with truss,
Here is the truss o/p.
http://pastebin.com/raw.php?i=thvekw7VAnother thing observed is when the nis+ user logs into these workstations, they can't do ssh to any machine , it hangs and CTRL C also doesn't kill it. They have to close the terminal itself to kill it.
Gnome -panel grayed out -screen shot : http://img695.imageshack.us/img695/5835/gnomepanel.jpg
Additional message from /var/adm/messages on workstations,
Mar 30 16:23:23 workstation26 pseudo: [ID 129642 kern.info] pseudo-device: devinfo0
Mar 30 16:23:23 workstation26 genunix: [ID 936769 kern.info] devinfo0 is /pseudo/devinfo@0
Mar 30 16:23:24 workstation26 pcisch: [ID 370704 kern.info] PCI-device: sound@8, audiots0
Mar 30 16:23:24 workstation26 genunix: [ID 936769 kern.info] audiots0 is /pci@1e,600000/sound@8
Mar 30 16:23:25 workstation26 gdm[450]: [ID 944828 daemon.warning] gdm_slave_session_start: /home/username is not owned by uid 821.@ workstations,
#id username
uid=821(username) gid=500(group)
# ls -ald /home/username
drwxr-xr-x 67 username group 4608 Apr 7 12:55 /home/usernamePlease help !!
Thanks

I am experiancing the same issue. User homes are on nfs automount. No NIS is set up currently. The problem appeared after the home directories were mounted with nfs3. Previously they were mounted as nfs4. But even newly created users get empty gnome panel.

PDF issues in Solaris

Hello,
I'm new in Solaris and I have some problems wiht PDF documents. OS: Solaris 10 s10s_u4wos_12b SPARC.
I have the following issues:
-PDF graphic icons are degraded;
-When a PDF is opened in a new tab, the tab navigation doesn't work anymore and all other tabs are locked;
-PDF files can be seen but navigation is not possible until I close the opened PDF tab.
I think that mabye someone faced with this issue.
Thanks in advance

Does the character of the slower-loading .pdf items change when or if you
use Adobe Reader instead of Preview? Which one is your primary choice?
Although my main choice and default is Preview for .pdf items, some of the
files I have were made in a version of Reader and for whatever reason,
appear to be encoded or somehow customized in a way Reader will do a
better job of rendering them in the computer. So, for those files, I have
chosen Reader; while leaving the system default set to Preview.
While I did read the question, in reference to Preview, this may be the only option.
Perhaps such an arrangement may work for you, with only the troublesome items.
Good luck & happy computing!

Ramdisk issue in Solaris 10

Similar Messages

Maybe you are looking for