Rapid Installer 2004s SPS07 Any limitations?

Hi,
We have used the Rapid Installer 2004s (SPS07) to install the portal. Are there any limitations by using this installation? (like the number of users?)
Thanks in advance,
Antony.

Hi Marcelo Behr,
Thanks so much for the reply.
You have mentioned that JVM parameters need to be changed based on our configuration.
We have used the rapid installer to install Netweaver 2004s and will be using a few iviews on the home tab as well going live with a few iviews on Employee Self Services (ESS).
We will be going live with 2000+ users. 
Current Config ->
2CPU & 4GB memory server for portal
2CPU 4GB server for ITS production.
Your input will be greatly appreciated.
Antony.

Similar Messages

  • Installation - [Netweaver Rapid installer 2004s] ERROR - CJS-30150

    Hi,
    Our team had the following issue with the Netweaver Rapid installer 2004s.
    The installer runs fine until the following error pops up during Step 39 of 51 (Preprare to install minimal configuration) under STEP 4 (Execute service) of the rapid installer.   
    ERROR 2006-09-01 20:01:39
    CJS-30150  Java processes of instance KL1/JC01 [Java: UNKNOWN] did not reach state PARTRUNNING after 20:30 minutes. Giving up.
    ERROR 2006-09-01 20:01:39
    FCO-00011  The step startJava with step key |rapidinstaller|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|7|0|NW_Call_Offline_CTC|ind|ind|ind|ind|7|0|startJava was executed with status ERROR .
    We are unable to proceed with the installation. The Retry option also fails. The error comes up after about 30 minutes. The status bar displays the following.
    "Starting KL1/JC01 [Java:UNKNOWN] Elapsed Time XX:XX minutes"
    The PC configuration has only 2GB of RAM . It does not have the recommended 3GB of RAM. Could this be the issue or is it some other reason?
    Any advice is greatly appreciated.
    Pradeep.
    Chief Solutions Architect.
    SGIT, Sri Lanka.

    Hi Harsha,
    Please read note "Note 110172 - Windows: Transactions with large storage requirements" which says what i told you. Here is the part of this note.
    Note mentions that there is a solution for windows servers to enable 3 GB per process.
    Memory problems with background programs, Memory Management under Windows, 32-bit Windows
    Reason and Prerequisites
    A maximum of 1.2 - 1.5 GB was previously available for a program in the 2 GB address space under 32-bit Windows. The rest of the address space is either used by Shared Memory buffers, program data and loaded DLLs or is too heavily fragmented.
    Solution
    To enhance or optimally utilize your address space, the following steps are necessary:
          1. Install your Windows operating system again or set it up again.
          The Windows Server operating system family provides a 3 GB address space for each process with a specific boot option. Programs which are to use this 3 GB address space, must be prepared by a flag in program header. To do this, Windows must be installed again, or an already existing Windows version must be set up according to the Microsoft guidelines.
          2. Activate the 3 GB boot option according to Microsoft KB article 283037.
          3. Import the current kernel patch for your SAP system, and note the following details for your SAP system:

  • Rapid Installer 2004s EP or NW

    HI,
    I want to order Rapid Installer 2004s for EP, but when I go into the Software Catalog I see that there are 2 versions EP & NW!
    Could someone please tell me the difference between them
    Thank you in advance

    Hi,
    Go through the contents under the caption 'Versions' in the following doc,
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/503f02a7-1244-2a10-afa2-af1e8e5e4773
    Hope this helps !
    Regards
    Srinivasan T

  • Installed Netweaver 2004s with Rapid Installer , can not connet to BI7.0!!!

    Hi,
    I installed Netweaver 2004s with rapid installer but i can not connect to BI7.0 with SapLogon 710. SapLogon waiting for response forever. What are the post actions after I installed the Netweaver 2004s. I can connect to portal by IE.
    I am new to this so any help will be greatly appreciated.
    thanks,
    Jenni

    OS is Windows Server. SAPID is IKI. I am the only one trying to connect to BI so DPMON is not the issue. I wanted to stop and start the SAPIKI_03 service but I can not stop it, maybe it is related to that.
    What are the post steps after installing rapid installer?
    How can I make sure that I installed Java+Abap stack or only Java?
    Thank you for your help.
    jenn

  • Rapid Installer ESS / MSS

    We installed Portal using Rapid Installer. SAP Netweaver 2004s EP 7 SP11 with ESS MSS Scenario. I do not know what version of ESS MSS version it is. I am expecting it to be ESS MSS 1.0.
    Now with respect to SCAs for the code when I navigate the CMS screens I see ESS MSS 700. But when I try to download SCA's the latest release I see is ESS MSS 600. Any body know about the actual version of SCA's that I should be using keeping in mind of the Rapid Installer.
    Any help appreciated.

    Thanks for confirning chitti. I also felt the same.
    1- Does this include backend(SAP r/3)configuration as well?
    2. in addition to basic ESS and MSS like pers data,address, family details, bank ...they want benefit module to include as well.
        which will be the best approach (ABAP-webdynpro / Java Webdynpro).

  • Nw2004s Rapid installer problem

    I am attempting my first portal installation.
    I am using the 2004s Rapid installer for MS-SQL Server.  My installation is erroring out in the Import Java Dump step.  The error says to look in the jload.log and jload.java.log files.
    This is the error I see in both log files.
    SEVERE: java.util.zip.ZipException: invalid literal/length code
         at java.util.zip.InflaterInputStream.read(InflaterInputStream.java:140)
         at java.util.zip.GZIPInputStream.read(GZIPInputStream.java:87)
         at com.sap.inst.jload.io.ChoppedInputStream.read(ChoppedInputStream.java:130)
         at java.io.BufferedInputStream.read1(BufferedInputStream.java:220)
         at java.io.BufferedInputStream.read(BufferedInputStream.java:280)
         at java.io.DataInputStream.read(DataInputStream.java:170)
         at com.sap.inst.jload.db.BlobHandler.setValue(BitHandler.java:147)
         at com.sap.inst.jload.db.DBTable.load(DBTable.java:274)
         at com.sap.inst.jload.Jload.dbImport(Jload.java:323)
         at com.sap.inst.jload.Jload.executeJob(Jload.java:397)
         at com.sap.inst.jload.Jload.main(Jload.java:621)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
    I am not sure where to begin debugging this problem.  Any suggestions?
    Thanks,
    Steve

    First thing I would check is that you have full permissions on the directories you are installing into and reading from.
    Mike

  • Rapid Installation

    Hi Victor,
      Any idea why SAP has not come up a rapid installer for the Netweaver 2004s. It seems they have come up with an installer for everything else but the I5/OS systems.
    thanks,
    Greg

    There is now a rapid installation of SAP on System i. It is called KOBI project tape image. What happens is that the System i developer team in Walldorf installs SAP in their machine and save the entire systsem into a tape media and send it to the implementor for use.  All i5/OS PTFs and SAP Kernel patches are also applied to the most update level for you.
    I just used two KOBI tapes (one for PRD, the other for DEV+QAS) to restore for my customer last week and it worked fine. Contact your local IBM System i unit on this.

  • Anonymous access to KM in 2004s SPS07

    Hi experts,
    I have setup an External Facing Portal on 2004s SPS07, but the anonymous user needs to be authenticated when accessing XML forms documents. The XML forms documents are indeed shown through KM navigation iViews. Images from KM are also not shown; HTML documents in KM however are.
    I think something has changed in 2004s, because according to note 837898, the only thing that needs to be changed is setting the AuthScheme property for the iViews in Standard Portal Role to Anonymous. I have done this step, but it won't get through. I get several error messages in the default.trc which say:
    Regarding Anonymous access to Standard Portal Role:
    com.sapportals.portal.prt.runtime.PortalRuntimeException: Access is denied:
    pcd:portal_content/every_user/general/eu_role/com.sap.km.home_ws/com.sap.km.hidden/com.sap.km.urlaccess/com.sap.km.docs - user: visitor
    Regarding editing the Standard Portal Role:
    [com.sapportals.portal.pcd.admintools.roleeditor.RoleEditorCompContextHandler] Ex.msg:null [EXCEPTION] #1#java.lang.NullPointerException
    com.sap.security.api.NoSuchRoleException: Principal set ROLE.PCD_ROLE_PERSISTENCE.aLs3DpIRt8wxUeWRnJ+poSMWUUE= doesn't exist!
    Regarding XML forms:
    Exception getting currently running XMLForm Module version.
    java.lang.IllegalStateException: No transaction at com.adobe.service.J2EEConnectionFactoryManagerPeerImpl.getConnection(J2EEConnectionFactoryManagerPeerImpl.java:70)
    When looking in the com.sap.km.cm.par file AuthScheme property for components docs, navigation, xmlformspreview, et cetera, is still set to basic authentication.
    Does anybody know what goes wrong and how to solve this? Thanks a lot in advance!
    Kind regards,
    Hilco Broens

    Hi Stefan,
    In this version (2004s SPS07) I don't need to change the settings in the URL generator service, since they all point to irj/go/km/docs.
    Accessing documents (HTML, XML) directly through a KM doc iView is succesfull, however when opened from a link within a KM nav iView or KM search iView it won't work:
    - opening a link like irj/go/km/docs/.../doc.ext results in an access denied error:
    Access denied (Object: portal_content/every_user/general/eu_role/com.sap.km.home_ws/com.sap.km.hidden/com.sap.km.urlaccess/com.sap.km.docs).
    - opening a link like /irj/servlet/prt/portal/prtroot/com.sap.km.cm.xmlformpreview?XMLFormID=id&show=/repository/.../id.xml results in the authentication form.
    Note: images in this repository are never shown!
    Concerning your second idea, in com.sap.km.cm in application-config there is a property:
    <property name="SecurityArea" value="NetWeaver.KMC" />
    In component-config for all related components:
    <property name="SafetyLevel" value="low_safety" />
    The problem still remains in the fact that I cannot change the AuthScheme property to Anonymous for Standard Portal Role iViews properly. I figure this will change the  <property name="AuthScheme" value="basicauthentication" /> in com.sap.km.cm to Anonymous.
    Any other ideas?
    Kind regards,
    Hilco

  • System Copy and Rapid Installer

    Hi,
    We have installed EP6.0 SPS13 using Rapid installer 2.5 and now we want to 'system-copy' this.  The system copy installation guide talks about getting the required DVDs ready. There is only two DVDs in RI2.5. Is it possible to system - copy a RI installation?
    Thanks
    Raj Balakrishnan

    Hi Raj,
    interesting question. In fact, the RI base /is/ a system copy itself. Anyhow, I would expect this to work, too.
    Have you just tried it meanwhile? Any results?
    Best regards
    Detlev

  • Rapid Installer includes Visual Composer?

    Hi all,
    I want to install and run NetWeaver Portal. It is planned to be connected to SAP BI. In a later step, it should be possible to create applications/models via the Visual Composer.
    Now my question: Could anybody say something about their experience with the Rapid Installer and if it's recommendable for purpose at all? I'm afraid that VC is not part of the Rapid Installer, am I right? If so, is it difficult to implement it later on?
    Thanks for your posts!
    Best regards,
    Tobi

    Hello Tobias,
    If you want to use the Rapid Installer (RA) for NetWeaver 2004s, the answer is YES the VC is included
    For previous version is not included and you must install your portal with the RA and afterwards install the Visual Composer.
    I hope this clarify your doubts.
    Kindest Regards,
    Luis

  • Rapid Installer EP - license not applied

    I have installed an EP with Rapid Installer (which is an EP 7 SPS 7 as far I undertand). I have applied the following licenses:
    - J2EE-Engine_ADA and
    - NetWeaver_ADA
    The license installation from file was declared "SUCCESSFUL"
    Nevertheless the Server shuts down after 10 minutes
    Any hint what is going wrong?

    Timed out

  • Netweaver Rapid Installer

    Hi all,
    i have installed the Portal using the netweaver rapid installer and everything went fine, after that i launched the sapinst one more time and this time chose the configuration part the Self Service packages without PSS
    however the installation is stops while it is still taking the parameters with the following error
    Execution of the command "C:\j2sdk1.4.2_12\bin\java.exe -classpath C:/usr/sap/XSS/JC01/j2ee/cluster/server0/apps/sap.com/tclmctcutilbasic_ear/servlet_jsp/ctc/root/WEB-INF/classes com.sap.ctc.util.ConfigMainExt com.sap.ctc.util.Verifying;MAINTAIN_JCO_DESTINATION;NAME=SAP_R3_Financials,CLIENT=,MSGSERVERNAME=,SYSTEMNAME=,USER=,PASSWORD=,LOGONGROUP=PUBLIC,USERTYPE=SSO,SLDHOST=netweaver,SLDPORT=50100,SLDUSER=SLDDSUSER,SLDPASSWORD=des19(80|24|150|247|101|200|181|119|);CHECK netweaver:50100 Administrator XXXXXX" finished with return code 0. Output:
    TYPE=A<BR>STATE=<BR>INFO_SHORT=com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.LcrException: CIM_ERR_NOT_FOUND: No such instance: SAP_J2EEEngineCluster.CreationClassName="SAP_J2EEEngineCluster",Name="XSS.SystemHome.netweaver"
         at com.sap.lcr.api.cimclient.SimpleResponseAnalyser.raiseExceptionOnError(SimpleResponseAnalyser.java:120)
         at com.sap.lcr.api.cimclient.SimpleResponseAnalyser.getIResult(SimpleResponseAnalyser.java:53)
         at com.sap.lcr.api.cimclient.CIMOMClient.sendImpl(CIMOMClient.java:218)
         at com.sap.lcr.api.cimclient.CIMOMClient.send(CIMOMClient.java:146)
         at com.sap.lcr.api.cimclient.CIMOMClient.getInstance(CIMOMClient.java:572)
         at com.sap.lcr.api.cimclient.CIMClient.getInstance(CIMClient.java:1250)
         at com.sap.lcr.api.sapmodel.SAP_J2EEEngineClusterAccessor.getInstance(SAP_J2EEEngineClusterAccessor.java:92)
         at com.sap.lcr.api.sapmodel.SAP_J2EEEngineClusterAccessor.getInstance(SAP_J2EEEngineClusterAccessor.java:78)
         at com.sap.ctc.util.Verifying.maintainJcoDestinationCheck(Verifying.java:1271)
         at com.sap.ctc.util.Verifying.performCheck(Verifying.java:275)
         at com.sap.ctc.util.ConfigServlet.doGet(ConfigServlet.java:70)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    //     => Error while obtaining JCO connection.
          + com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnection(SystemLandscapeFactory.java:149)
          + com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnection(SystemLandscapeFactory.java:157)
          + com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.getJCOClientConnection(WDSystemLandscape.java:41)
          + com.sap.ctc.util.Verifying.maintainJcoDestinationCheck(Verifying.java:1233)
          + com.sap.ctc.util.Verifying.performCheck(Verifying.java:275)
          + com.sap.ctc.util.ConfigServlet.doGet(ConfigServlet.java:70)
          + javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
          + javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
          + com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
          + com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
          + com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
          + com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
          + com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
          + com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
          + com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
          + com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
          + com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
          + com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
          + com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
          + java.security.AccessController.doPrivileged(Native Method)
          + com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
          + com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
         + Checking SLD content ...
          + SLD ping to http://netweaver:50100 OK.
          + Cluster Name:XSS.SystemHome.netweaver
    is there something that should be configured before running the configuration ?
    I also couldnt find any installation guides so could some please share his knowledge.

    Hi,
    You should contact SAP to get the software. Netweaver Rapid Installer is optimized to run on 2 Hardware configurations (SUN for Unix and HP for Win-based).
    (for Sun have a look at http://www.sun.com/third-party/global/sap/solutions/rapidinstaller.html )
    Regards,
    Igor.

  • NW7.0 install under linux - Rapid Installer

    Hello,
    I tried to install NW7.0 SR3 (SPS14) under OpenSUSE Linux 11 with a Rapid Installer package.
    The installation routine started and the first screen was shown (installation type). I marked the rapid installation of NW7.0 and clicked next. A few seconds later a message was shown with the information:
    "This computer's hostname is 'linuxportal.mydomain.de'. but a reverse lookup returned 'linuxportal.mydomain.de'......SOLUTION: Insert a line: '10.20.30.40 linuxportal.mydomain.de' into the host file '/etc/hosts' and then continue with the installation."
    I added this line to the file, restart the server and the same messagebox was shown in the same installation step.
    A nslookup command on teh console gave the correct mapping of the hostname to the ip-address. a o´ping on the ip-address and on the hostname was successful.
    What can I do th solve this installtion problem? Any ideas?
    Thanx
    Andreas Gräbnitz

    ok, I think, I have solved the problem. It is necessary to add two lines in the /etc/hosts file, one with the real ip-adress and the hostname and one with the ip-address 127.0.0.2 and the hostname - like this
    10.20.20.40 linuxportal.mydomain.de
    127.0.0.2   linuxportal.mydomain.de
    Good luck,
    Andreas

  • Error in ERP 6.0 Rapid Installer - "brconnect.exe - Entry Point Not Found"

    Hi
    I have the installer for ERP 6.0 + NW 7.0, but option "SAP System" was missing in installation menu.
    Then I downloaded ERP 6.0 (Rapid Installer, Oracle) from market place
    Followed the following steps
        - Install Oracle 10.2.0.1.0
        - Install downloaded ERP 6.0 (Rapid Installer)
        - But this stopped with an error
            brconnect.exe - Entry Point Not Found
                The procedure entry point longjmp could not be located in the dynamic link library orauts.dll.
    orauts.dll is oracle' client dll
    When I checked BRTool' version using command
        *************************************************************************************************************************C:\Documents and Settings\Administrator.CING4468>brtools -V
    BR0651I BRTOOLS 7.00 (6)
    Patch   Date     Info
    release note               849483
    kernel release             700
    patch date                 2005-08-31
    patch level                6
    make platform              NTintel
    make mode                  OCI_10103_SHARE
    make date                  Sep 19 2005
    Here make mode is "OCI_10103_SHARE"
    Rapid installer guide as well as documentation shows that this setup supports Oracle 10.2 but BRTools version shows compatibility with 10.1.
    Is it error because of database version mismatch?
    Thanks !
    Ruhi Hira

    Check for the ora<sid> group and also check the env variable for ora<sid>. This should solve the issue.

  • Creation of logic group - any limitation for the Criteria Value Field?

    I am trying to create simple logic groups in FDM (version 11.1.1.3 and 11.1.2.1). However, an error message displayed in the information bar.
    Error: Error adding new record.
    Detail: Data access error.
    I clicked the "Add" button and created a logic group which contains *1,520* non-sequential source accounts in the Criteria Value Field (with In operator).
    I have separated these source accounts with a comma and no spaces in between them. (Note: Operator = x, Value/Exp = 1, Seq = 0) I updated the grid. Then, the error message was displayed and the logic group creation was failed.
    And then, I created a new logic group which contains only *100* non-sequential source accounts in the Criteria Value Field (with In operator).
    I also separated them with a comma, no spaces and same setting. I updated the grid. And the logic group was added successfully.
    Each source account contains 10 characters (alphabet and/or number).
    I want to ask:
    1. Is there any limitation in specifying source accounts (i.e.. no more than certain number of source accounts for each logic group) in the Criteria Value Field when creating simple logic group?
    2. I am adding these logic groups by clicking the "Add" button one by one, is there faster way to do it (i.e.. upload an excel or csv file or source accounts specified)?
    Thank you very much!

    Thank you Expert for your reply!
    I would like to ask about loading the Logic Accounts with the template.
    As instructed, I exported the excel out for the template format and updated the template with new Logic Accounts. Then, I imported the excel file in the "Import XLS" section under Tools. The excel file was uploaded successfully. (Note: I am using excel 2010 and saved it as .xls file)
    However, there is no changes in the Logic Accounts and seem no updates was made.
    I want to ask:
    1. Did I import the excel at the right location (i.e. "Import XLS" section under Tools)?
    2. Is there anything else I need to do after the file has been imported (i.e. delete the existing logic accounts or click another button(?) for this change) so the new list of logic accounts would become effective?
    I would like to use excel to maintain my list of logic accounts for better control in the future.
    Thanks in advance!

Maybe you are looking for