RAR 5.3 - kill session of another user

how can RAR admin kill session of another user?

Hi Partha,
There is no way out to kill a user's session in RAR, nor in UME. The only place you can kill a user's session is in backend (R/3 side of a particular system) in T-code: SM04->select a particular session of any user-> end session.
Regards,
Gurugobinda

Similar Messages

Open GUI session of another user

Hi,
I would like to know, how to open a session in different user from another user using ABAP.? I would like to run a TCODE on another user session of same system.
Pls help.

Hi Partha,
There is no way out to kill a user's session in RAR, nor in UME. The only place you can kill a user's session is in backend (R/3 side of a particular system) in T-code: SM04->select a particular session of any user-> end session.
Regards,
Gurugobinda

Connect the current portal session to another user

We have to do application management for portal users. Often it's necessary to have the same view as the customer. So administrators need a portlet for specifying the user credentials and connecting the current portal session to this user. It's not possible to ask every user for his password.Has anybody created such a portlet?Is it possible to do this? Can I use the EDK or do I need the plumtreeserver - DLL? Which class do I need? Thanks for any help

Thank you - It works! Now I have an IPTSession-Object for the given user. But how can I set this to the current portal instance? I get only new sessions but I didn't find any way to change the current session.

Client application freezes permanently when one user logoff and another user take that session on windows server 2008 r2

Hi,
we have windows server 2008 r2 and In our application there are three server and on e client application.
My client application freezes on a specific scenario.
Steps taken to hang are following:-
1. start client application
2. open an module named by XYZ
3. login to remote machine with another session./ Another user login from their computer.
4. connect with the session which have client application opened.
5. Whenever the session is forcibly taken client application becomes unresponsive.

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
Since your post is off-topic, I am moving it to the
off topic forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

How to kill session in forms

In my application I want to kill session if any user
is idle for 2 minutes.
I am using oracle forms 6i and database oracle 9i

You have to use D2KWutil.pll
In when new form instance write the following code
declare
hWind PLS_INTEGER;
CheckTimer TIMER;
begin
hWind := get_window_property(FORMS_MDI_WINDOW,WINDOW_HANDLE);
Win_API_Session.Timeout_Start_Timer(hWind);
CheckTimer := Create_Timer('CheckTimeout',1000,repeat);
end;
and in when timer expired trigger write the following code
begin
if upper(get_application_property(TIMER_NAME)) = 'CHECKTIMEOUT' then
:timer.t1 := Win_api_session.Timeout_Get_Inactive_Time;
if :timer.t1 > 120 then -- timer is a block and t1 is text item (don't assign a canvas to it, make it invisible)
Win_API_Session.timeout_delete_timer;
exit_form (NO_VALIDATE);
end if;
end if;
end;
hope this helps !!

Kill session from 6i form

Hello All.
How can I kill user's session by click e.g. button in form 6i in client/server or web.
Thankx all.

Hi Sarah, thanks for ur reply.
I did not use toad to kill session.
I use form application to kill session,
e.g. user id 1111 log in to the application in PC 1
at the same time, same user id 1111 log in to the application in PC 2
So when the user log in into PC 2, i kill the session in PC 1 (in form application).
So when i log out from PC 2, i close the applet, in the next hour, i need to log in again using PC 2 without close the IE.
So the IE is not responding.
Is there any way to refresh IE without re open again to connect to the application ?
Thanks,
Iwan

To kill session in one schema from another schema

Hi Team,
I got a problem like a table from one of my schema has been locked. I am getting 'ORA-00054: resource busy and acquire with NOWAIT specified' error when trying to delete rows from that table or even when trying to truncate that table.
Let the table be 'T1' present in schema 'VIEW'
I tried to kill the session which is active for that schema by below query
select sid,serial#,status from v$session where username='VIEW' and STATUS = 'ACTIVE';
alter system kill session '681,2586';
But i couldn't do the above as i don't have DBA privilege for that. But i have DBA privilege for another schema let it be 'ADMIN'
Now how can i kill the session in schema 'VIEW' from schema 'ADMIN'
can any one get me solution.
Thanks in Advance
11081985

I got a problem like a table from one of my schema has been locked. I am getting 'ORA-00054: resource busy and acquire with NOWAIT specified' error when trying to delete rows from that table or even when trying to truncate that table.
Before you do anything why don't you actually find out WHY that table has been locked.
You generally should NOT be killing sessions without knowing what is causing the problem to begin with.
Then you also need to determine if you should use KILL SESSION or instead use DISCONNECT SESSION and well as whether the use of IMMEDIATE is appropriate.
Each of those choices acts differently. Many people use KILL when they should really use DISCONNECT.
See DISCONNECT SESSION Clause and KILL SESSION Clause in the ALTER SESSION chapter of the SQL Language doc
http://docs.oracle.com/cd/E11882_01/server.112/e17118/statements_2014.htm#i2282145

User cannot dropped after run "Kill Session" command

Hi ,
I’m facing problem with oracle user,
Oracle 10G R(2).Windows Xp
Application in .NET
1)I create user:
2)Then I check current session using this select”
"SELECT SID, SERIAL# FROM V$SESSION WHERE UserName =
3)Then I execute this statement from application”
ALTER SYSTEM KILL SESSION '{sid},{serialno}' IMMEDIATE”
4)In our scenario user is no more connected.
5) Now when we run below this statement from application oracle gives an error”CANNOT DROP THE USER THAT IS CURRENTLY CONNECTED”
DROP USER {0} CASCADE
Please advice.
Faheem Latif

Comments embedded
Hi ,
I’m facing problem with oracle user,
Oracle 10G R(2).Windows Xp
Application in .NET
1)I create user:Please post complete command
>
2)Then I check current session using this select”
"SELECT SID, SERIAL# FROM V$SESSION WHERE UserName =
Please post the complete command.
3)Then I execute this statement from application”
ALTER SYSTEM KILL SESSION '{sid},{serialno}'
IMMEDIATE”
Please post the complete command
4)In our scenario user is no more connected. How did you verify? Please post the complete command.
>
5) Now when we run below this statement from
application oracle gives an error”CANNOT DROP THE
USER THAT IS CURRENTLY CONNECTED” So the user is still connected.
Which user are you trying to drop? Yourself?
Again, please post the complete command.
>
DROP USER {0} CASCADE
Please advice.
Faheem LatifMy advice is you either provide sufficient detail, including all commands, and stop relying on crystal balls and fortunetellers.
No one here was looking over your shoulder, so no one can tell what happened, without you providing sufficient clues. I agree with you this is cumbersome, and doesn't comply with your custom to dump everything here, not doing any research yourself.
Sybrand Bakker
Senior Oracle DBA

How to find and kill session similar to forms user session

We have a forms and reports based system that uses the oracle sessions. Sometimes if a form takes a long time we have the need to navigate to iAS>Forms>User Sessions, find the IP of the machine where the form is not responding and kill it based on the IP of the troublesome machine.
I want to add this into our forms environemnt so people can kill their own sessions if need be but not sure how this is handled
is it a simple alter system kill session in the db or something different.
also how is the ip found to match the session?
Thanks

hi,
Instead Set session timeout parameters..So that user gets logged off automatically from the application after a particular interval of time
For this you have to make changes in httpd.conf file,web.xml file and env file
Regards
Fabian

How to kill the session after the user exit the ADF application

Dear all
I have a problem
The problem is the session still exist after the user close the application and the browser. I want to kill all sessions that is not active.
This is my test scenario:
1- I open IE and run my ADF application that is deployed on weblogic. http://192.168.100.17:7001/myapp/faces/login
2- At the same time I issue this SQL command to view the sessions for user 'ADFUSER' - the "ADFUSER" is the schema user.
SELECT USERNAME,STATUS FROM v$session
WHERE USERNAME = 'ADFUSER';QUERY RESULT IS
USERNAME                       MODULE                                           STATUS
ADFUSER                         JDBC Thin Client                                 INACTIVE3- Now the user close the browser
4- Run the SQL again and I notice that the session still exist
SELECT USERNAME,STATUS FROM v$session
WHERE USERNAME = 'ADFUSER'RESULT:
USERNAME                       MODULE                                           STATUS
ADFUSER                        JDBC Thin Client                                 INACTIVE5- now the user open the URL again http://192.168.100.17:7001/myapp/faces/login
6-Run the SQL again , and I notice that the old session still exists and a new session created too.
SELECT USERNAME,STATUS FROM v$session
WHERE USERNAME = 'ADFUSER'RESULT:
USERNAME                       MODULE                                           STATUS
ADFUSER                        JDBC Thin Client                                 INACTIVE
ADFUSER                        JDBC Thin Client                                 INACTIVE
2 rows selected.and every time I login to the application , a new session is open and the old session still exist
I do not know why this happens
I want to kill old session when the user close the application.
These sessions are cleared only when i restart the weblogic domain.
here is some information about my development environment:
Jdeveloper 11.1.2.3
WebLogic Server Version: 10.3.5.0
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
thanks in advance

Hi,
for performance reasons you should not use dedicated user connections to the database. Instead you use JDBC data sources (default in JDeveloper for ADF BC) that you can configure the database connection pooling for. This means that your v$session will always show a set of active session, which however are shared among users. Assuming you use ADF BC, this is what happens
- A user requests a data bound page
- The ADF BC checks out an AM and connects to the database using one of the database connections in the pool
... user work here ...
- user exits application
- ADF BC returns AM to pool and passivates pending user state (if application is left with dirty transaction)
- Database connection is available in pool as soon as AM released
This also happens between requests. Long story cut short: v$session doesn't give you a true picture
Frank

Copy Session function in 4.6C (To view another users session).

Hi All,
I recall in version 4.0 of R3 an option called copy session which allowed you to view another users session. This option seems to have been taken away in newer version.
Does anyone know of another way of interactively looking at another users session,
Kind regards,
James Mandikos.

Hi James,
Sometime back I have invested a lot of time and effort trying to do exactly what you're now up to !!
Unfortunately, I have not been able to do it. I have done a lot of debugging and tried to do that in some way or the other, but in vain. The reason, if I remember correctly, is that the code responsible for that action is not even there in the higher releases. That is presumably for reasons of security.
Regards,
Anand Mandalika.

VZ access manager is already running in another user's session

Help! My parents currently use an USB Modem - I think the 551 L - for their internet access. They have been receiving the following message:
VZ access manager is already running in another user's session
They do not have a wireless router installed.
Help please!

VZAccess can only connect one user/session at a time. Either your parents did not properly shutdown VZA the last time they used it or the USB Modem is not hanging up its previous connection.
The easiest thing to do would be to reinstall VZA on that computer and see if the problem goes away. Ask your parents to disconnect the Modem before logging off or shutting down the computer to reduce the chance of the problem coming back.

Certificate prompt in RDP session and then puts an Allow/Deny option on another users session

The users have a SSL cert installed with the private key so they can access a certain web site and when they access the site using the Windows 2012 R2 RDP server they are getting prompted with a Windows Security dialogue (Confirmation Certificate) and they
press ok. Another user will now get the next message asking if to allow or deny access to the cert. If they click allow the web site will appear for the original user.

Hi,
Thank you for posting in Windows Server Forum.
Can you clarify the actual error message you are getting? Also please let us know, whether there is any event log available.
Seems that you have not placed the certificate under Local Computer\Personal Store. Kindly recheck the configuration related to certificate and please keep the certificate under above path with its private key and verify. You can follow below steps for information.
• Open the MMC and open the Certificates snapin
• Add the Local Computer
• Import the certificate into Computer\Personal
• Open the certificate and find the thumbprint on the details tab. Copy the thumbprint to notepad and delete all the spaces.
• Open up an elevated PowerShell prompt and write:
• wmic /namespace:\\root\cimv2\TerminalServices PATH Win32_TSGeneralSetting Set SSLCertificateSHA1Hash=”‎PASTE_THUMBPRINT_STRING”
• You can check the certificate by running:
• Get-WmiObject -class “Win32_TSGeneralSetting” -Namespace root\cimv2\terminalservices -Filter “TerminalName=’RDP-tcp'”
Source:
INSTALL AND CONFIGURE A REMOTE DESKTOP CERTIFICATE ON RD SESSION HOST SERVERS
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Tracking records change made by another user or session

How does oracle forms track records change made by other user or session?

I think the question is, how does Forms know to issue the error "FRM-40654: Record changed by another user. Re-query to see change".
I don't know exactly how Forms knows this. But in the past I have found that if a column has changed on the record, which you are not querying in this forms block, then you don't get the error. So Forms is perhaps comparing all the database values for the queried record, against the values that Forms has queried?
When you attempt to lock the record from Forms, you'll see that Forms issues a statement
SELECT <all the db columns in the block>
FROM <wherever>
FOR UPDATE OF <all the db columns in the block which are not query only>
Even so, in the database, that statement doesn't know what the values are that the Form has already queried. So Forms must be doing something else.
Hope this helps, it's a bit of a black box area I guess.

Killed sessions

Hi,
I kill a session with the commands:
select username, sid, serial#, status from v$session where username like 'RION%'
alter system kill session 'sid, serial#'
and if I give again the first select command at the status column appears KILLED. I want not to have KILLED in the status column.
Thank you,
Mihaela

hi all,
As u know you are seeing the status of at v$session view as killed, I wanna confirm that this will exists in two senario.
When a Session is in inactive state and a kill command on that session is issued then the "status" column of v$session will be updated as killed as to indicate/mark as it is killed, and the "server " column will be updated as psuedo. when the user again try to connect to the session user will receive 0ra-00028 error and the entry will be removed from v$session.
Another senario is that the transaction is at its half way, either in commiting or at the roleback stage for that partucular session then also you can find that the v$table is updated as above.
more information, go through the documentation, at the Server Process handling section.
i hope it cleared your confussion,

RAR 5.3 - kill session of another user

Similar Messages

Maybe you are looking for