Raw materials to other Factory_ on credit for time being

Dear All,
Here in my client we have the below scenario,
For few of the raw materials, if they dont have stock then for time being they will get that materials from their neighbour unit( Not belongs to my client) & will capture the excise duties as well.
When my client will get his own material, may be after 12 or 15 days, he is going to return that material & will raise the excise for the same.
Some time my client will give some mat to others & they will return to us, when they will get the same.
Pls suggest me how to map this ?
Regds,
Channa

But my client wants this also in SAP,
Pls suggest is there any way ?
regds,
Channa

Similar Messages

Getting credit for time served

I was out of OTN for a year or so when you went thru the merge and went to using email addresses. But I no longer had that email address and just never changed it.
I see on everyone's post the date they signed up, and I feel like a noob. I have my old username and password, can I have my membership date retrofitted? I remember the early days!

I don't know what this person is telling you but I know from experience that that is definitely not correct.
Verizon keeps a record of when the outage was reported and when the repair ticket has been resolved.
If your outage is for less than 24 hours, there is no credit but if the outage is longer than that, then a credit gets issued automatically.
I have always received credit for loss of service over the years and I never specifically had to request it.

Why is my bill "credit" for autopay being ADDED to my bill?

I signed up for Autopay (prepaid) and was offered a $5 per month credit. Well, the $5 is being added to my bill to the point where I am now being overcharged $25 since I just noticed it.
Sounds like someone forgot a MINUS sign for a CREDIT. I am shaking my head, this is rather ridiculous and makes me wonder about the quality/integrity of the billing system of Verizon. Can someone fix this ASAP? I am sure I am not the only one.

my mistake, the online bill is not clear in showing credits, thanks to the customer service rep, she cleared up the confusion.

IPhone 11 drops support (at least for time being) for Calendars #FAIL

I could not believe this - Apple releases iPhoto without Calendar support??? Are you kidding me? I have used that capability now for the last 3 years. What a disappointment.

1 - do you have a question about using iPhoto that the users here can answer?
2 - did you read the iPhoto feature list prior to purchasing?
Hardcover Books
Extra-large: 13x10 inches
Large: 11x8.5 inches
Softcover Books
Large: 11x8.5 inches
Medium: 8x6 inches
Small: 3.5x2.6 inches
Wire-Bound Books
Large: 11x8.5 inches
Medium: 8x6 inches
Letterpress Cards
5x7-inch letterpress cards with matching envelopes
Folded Cards
5x7-inch cards with envelopes
Flat Cards
4x6-inch cards with envelopes
Prints
From handy 4x6-inch prints to huge 20x30-inch posters
3 - the iPhone is a hardware device that makes telephone calls among other things - it has nothing to do with iphoto
LN
Message was edited by: LarryHN

Data not updating for raw materials only in cube level

HI all gurus,
we have flow like ods1->ods2->cube1,cube2 and cube3.
In ods1 we mapped ZMATERIAL WITH OMATERIAL.
In ods2 we mapped zmaterial with zmaterial directly.
In cube we mapped zmaterial with zmaterial only but also we added 0mat_type in update rules of cube. i.e.we mapped in update rules 0mat_type is master data attribute of zmaterial.
But the problem is ods2 is mapped to cube1,cub2 and cube3 parllelly.
But the data is not populating to cube2 and cube3 only for rawmaterials i.e 0mat_type is having 15 material types(finished ,semi finishe and rawmaterials) only 4 raw materials are not showing any data for these two cubes but for one cube1 it is showing data for all 15 material types. (including raw materials)
what could be the problem.
I checked the Attribute change run.
I checked the data in masterdata also zmaterial and 0material.(data is available upto date).
Please help and i will definitely assingn the points.
It's very urgent becauz total my development work is stopped.
Thanks & regards,
Kumar.

Hi,
Check the material values in cube2 and cube 3 for records not having 0mat_type and then using that material check the material master data table to confirm whether mat_type is present for those materials or not.
Also, if you have written any start routine in update rules for cube 2 and 3 then check that too.
PB

Can I partition a hard drive so that one partition is for windows files and the other is for time machine backups?

I have a 1TB WD passport that currently contains windows files e.g photos, documents, etc. Can I partition it so that one partition contains these files and the other partition is used for time machine backups? Also, how do I change the partition system on the hard drive so that it uses the GUID partition system?
Thanks in advance.

Yes, you can, though you need to format and partition the drive from the scratch.
1) back up your PC data on other drive.
2) partitioning your drive into 2 partitions with Disk Utility.
3) format one partition by Mac OS extended (journaling) for Time Machine, the other by exFAT for PC data.
4) restore PC data on exFAT partitioned drive.

Can we create a single bdc for raw materials , and for some other transacti

hi
can we create a single bdc for raw materials , and for some other transaction? how?

Hi Jyothsna
For one transaction you will have to build your bdc table according to the recording for that transaction and then call that transaction using the bdc table. For another transaction , you will again have to build the bdc table with the details of that transaction.
You cannot call all at one shot.
Cheers
shivika

Collective requirement for Raw materials for the whole week during mrp ru

hi gurus,
I have a requirement like this. the raw materials required for on different requirement dates has to be clubbed together per week and one single purchase requisition for that raw material for that week. I had created a availability checking group and assigned that to check rule. then attached that in material master mrp 3 view of the material master.
If i run mrp for that product, it is not clubbing the weekly requirement instead it is clubbing only daily requirement and pr is getting generated.
can anybody give some valuable inputs so that i can proceed further?
regards,
senthil

Hi,
Try using the Lot Size: WB.
With this system wil club together all the requirements and propose a single receipt element.
Regards,
Siva

Cost Estimates - system collects planed price for some raw materials only

Hello
I have a question regarding price determination for raw materials when creating cost estimates. My costing variant uses material future price (Accounting 1 view) in raw materials as a primary source for price collecting of raw materials and I want it to be that way. But the problem is that when creating a cost estimate only some materials are recognized as raw (key symbol) while others are recognized for costing (calculator symbol), although all of them have a future price entered into material master data on the same date. For those that are recognized for costing the system uses the average moving price.
I have tried setting all the data for raw materials the same way, the costing views (do not cost, no qty structure), the accounting views are the same and I still cant find the reason why system uses one type of valuation for some and other for others.
Help?

Please check the Price Strategy sequence in the Valuation variant assinged to the Costing Variant in Tcode OKKN. The first priority in your case must be Moving avg price. So, please change it to the planned price which you want. The system will then consider this planned price for the raw material valuation.
hope this info helps you.
regards,
VS.

Planning at client level for raw materials

HI all,
I've several plants under one company code, sometimes same raw materials are used to produce finished products in various plants. Here, we are using central purchasing department to procure the raw materials.
For instance, in plant 1000, the user from purchase department raises a purchase requisition for ' X ' component to produce the finished product, and same ' X ' component exist in the BOM of finished Product in plant 2000, for which stock exists in plant 2000 and is a high value component.
The issue here is the purchase planner in the central purchasing department is not aware of the stock which exists in plant 2000, and raises a purchase order for the requisition generated from plant 1000.i.e If the purchase planner could check the stock in plant 2000, this enables him to generate STO for plant 1000 from plant 2000, which save the inventory costs.
I would like to know, whether this issue can be mapped in APO.
Any help, much appreciated.
Thanks & Regards,

Hi Rajesh,
You can actually just do the whole thing in SNP Heuristics. While Optimizer is capable of giving you better solution, I suggest trying Heuristics first as it is simple and inexpensive compared to Optimizer.
Here is the suggested solution:
You have plants 1000, 2000 and 3000 and you have a DC "DCA" ( your procuring department)
When there is a requirement at DCA, you want to check the stock in 1000 first than in 2000 and then fianlly in 3000.
Set your material with procurement type E in plant and F at the DC
Create transportation lanes between
DCA-1000 with transportation time say 2 Hrs ( in means of transport)
DCA-2000 with transportation time say 3 Hrs ( in means of transport)
DCA-3000 with transportation time say 5 Hrs ( in means of transport)
When you run SNP location heuristics, the system checks the plant with shortest transportation time and takes 1000, if not found it tries 2000 and finally 3000 to create a stock transfer.
Please remember that transportation lanes are always one way and APO does not support the flow in opposite direction line 1000 to DC is supported but not DC to 1000. This stock transfer has to be manually created in ECC system.
Please let me know if I got your scenario right.

Profit Centers for Raw Materials

Hi Experts,
I would like to know in general which profit center will be used in raw materials. For example raw material, say sugar, it can be used in finished product A and finished product B, its like a shared service, in this case which profit center needs to be assigned. Will there a P&L taken in these profit centers.
Also for cost centers, in a production line, there are can be different product lines can be manufactured, for eg finished product A different product line and finished product B different product line manufactured in one common cost center. In this case which profit center will be used in this common manufacturing cost center.
Apart from assignment, should we perform some month end allocation and stuff like that.
Thanks.
Best Regards,
GJ.

Hi,
If the raw material is shared by 2 product to manufactured then use the common profit center for raw material .
Regards,
Sreekanth

Item category group for Raw Materials

Hello Gurus,
Goodmorning,
I have a client requirement,
Here my client is selling the Raw materials , i have some confusion in taking the category group , what is the item category group we have to use for determing for the sales categories ? I don't find any special item category group for raw material . in material master as well as in item category determination in in sales document types too .
looking for your inputs in this regard.
Thanks &Regards
Ravi.M

Hello Ravi,
Sales of Raw material already being discussed some times back.
As I know, as per Central Excise law, you are not suppose to sell the raw material from a manufacturing unit.
Hence, you rename the ROH material code with suffix A. In tcode OSM2, activate sales view tab.
Apart from this, you need to maintain the renamed code in tcode J1ID with numeric value 1 under the tab Declared.
But, normal OR-LF-F2 process.
FYI - Choose of Material tyoe will be important than choose of general item category group. As I Cat group, Materials grouping that helps the system to determine item categories during sales document processing. If a group is configured specific to distribution channel, it has priority if the corresponding activity is distribution channel-dependent. In the standard system, there are normal items, items that signify services (and therefore need no delivery processing) and items that signify packing material, for example.
Thanks & Regards
JP

Purchase requisitions for raw materials

Iam having multilevel BOM and when I do Sales order MRP then Iam getting planned order for Semi finished items but not getting Purchase requisitions for raw materials.

Hi,
Planing File Entry :-
The planning file is used to limit the scope of the planning run for the
total planning run. For this purpose, all materials that have been
assigned a valid MRP type are automatically entered in the planning
file.
System will check the Planing file entry only in the case of Total MRP (MD01) or Total MPS (MD40).
While there is no need in the case of MD02,MD03,MD41,MD42,MD50.
Now how this Planing File entry activates,
- Once MRP is activated at Plant level (T.code OMDU)system automatically maintains entry in Planning file for all those materials which contains the Active MRP type.
- So if materials which are created before this activation of MRP in that case you have to maintain this planing file entry manual.You can do this either by MD20 or by using Back Ground Jon OMD0.
Regards,
Dhaval

Budget check in PR/PO for Raw Materials

Hello
We have requirement that there should be a Budget check even for Raw Materials before PR /PO is created.
We have observed that Budget check is done if Account Assignment Category "F" is used.But for procuring Raw Materials is there any way we can check the Budget.
Can this be requirement done through Funds Management ?
Regards
Vaibhav Mahajan

Hi,
'Budget check even for Raw Materials before PR /PO is created' before PR?when you want check budget?
'We have observed that Budget check is done if Account Assignment Category "F" is used'-not only for F.
'Can this be requirement done through Funds Management ?'-you can check at PR/PO level as well as GR/IR

In house mfgd. raw materials for a production order- Cost capturing

Hello Experts,
The scenario is as below:
Client wants to manufacture in house some of the raw materials for a production order of sub assembly. These raw materials are made from scrap, with some manhours spent on it. After making them in house, these are handed over to stores for kit preparation.
The planner wants to create a stock of these materials (without making individual prod. orders since there are many of these). One option is, planner can do the cost centre issue reversal (202 movement). But the raw material cost is also getting captured in it from the material master.
From costing point of view, the cost of raw material should not be included since it is made from scrap. Only the cost of man hours spent is to be accounted for.
Please help as to how to map this scenario. For capturing cost of man hours spent, we can include a routing for it in the production order of the sub assembly. But how to eliminate or exclude the material cost. All inputs from your side are appreciated. Thanks in advance
Regards,
Chetan.

Hi Chetan,
Your scenario has some major issue.
1. You cannot produce RAW material in SAP.
2. The cost of material produced inhouse will be different than that of original RAW material.
3. There will be some cost effect in the final finished product if you consider this inhouse produced material for product costing of finished goods.
We have similar scenario with my client and here is what I have implemented.
1. Create a new HALB type part number for the inhouse manufactured RAW material. This will ensure that you assign Routing and BOM to same and can capture the COST for the same.
2. Creating new material will enure that the product costing for inhouse produced RAW material is done.
3. You can create single Production order for the same as you only have to capture cost. This depends on your Business scenario.
4. Once you have inhouse produced raw material, you can create alternate BOM for the FINISHED Material with this new Part number in BOM.
5. Create Production Version for the two BOM and ask Planner to select the Version 2 if he requires new part number in Production Order. I assume that this case would genrally appear in very small numbers.
6. Now coming to product costing for final assembly. Since we are going to reuse scrap material to create the new part number, only activity cost and component cost will be used to determine cost. This cost will be less than that of RAW material cost.
So we always suggest our customer to consider OLD part number to determine the PRODUCT COST of final material. BUT business will have to take a call on this.
Do let me know if u need any thing else.

Raw materials to other Factory_ on credit for time being

Similar Messages

Maybe you are looking for