Re: Console displaying incorrect info about cluster

What if you restarted your admin server with discovery flag turned on? Will server B "rejoin"?
          Gene
          "Nathan" <[email protected]> wrote in message news:3b2e09c6$[email protected]..
          >
          > I have three servers in a cluster, server A, B, and C. The console tells me server
          > B is dead. However, server B is very much alive and has been fully participating
          > within my cluster for three days. My cookies show that server B is sometimes
          > the primary and sometimes the secondary server for diffrent user sessions. No
          > matter what I try with the console, it always shows server B as dead and that
          > I'm missing one server from the monitoring tab. Has anyone seen this behavior?

Nael,
          This is the same issue as your previous posting regarding the plugin / console. Simon
          answered it:
          This is a known problem. Please contact support and reference CR075667 to obtain the
          appropriate fix.
          Regards,
          Glenn Dougherty
          Developer Relations Engineer
          BEA Support
          Nael Ramadan wrote:
          > I am seeing the exact problem in 6.1 sp2. In my case I have 6 servers in the cluster.
          > Although the console reports, that there are only 3 participating server in the
          > cluster, I have verified that all 6 servers are receiving traffic from the plugin-in.
          > Does the console still have bugs in sp2?
          >
          > Kumar Allamraju <[email protected]> wrote:
          > >This is a known bug, fixed in 6.1
          > >
          > >
          > >Gene Chuang wrote:
          > >
          > >> What if you restarted your admin server with discovery flag turned
          > >on? Will server B "rejoin"?
          > >>
          > >> Gene
          > >>
          > >> "Nathan" <[email protected]> wrote in message news:[email protected]...
          > >> >
          > >> > I have three servers in a cluster, server A, B, and C. The console
          > >tells me server
          > >> > B is dead. However, server B is very much alive and has been fully
          > >participating
          > >> > within my cluster for three days. My cookies show that server B
          > >is sometimes
          > >> > the primary and sometimes the secondary server for diffrent user
          > >sessions. No
          > >> > matter what I try with the console, it always shows server B as dead
          > >and that
          > >> > I'm missing one server from the monitoring tab. Has anyone seen
          > >this behavior?
          > >

Similar Messages

Console displaying incorrect info about cluster

          I have three servers in a cluster, server A, B, and C. The console tells me server
          B is dead. However, server B is very much alive and has been fully participating
          within my cluster for three days. My cookies show that server B is sometimes
          the primary and sometimes the secondary server for diffrent user sessions. No
          matter what I try with the console, it always shows server B as dead and that
          I'm missing one server from the monitoring tab. Has anyone seen this behavior?


An older conversation which might address your problem was in the
          weblogic.support.install group (Thread was "Re: WebLogic 4.51 clustering
          problem with app servers" ). I've quoted it here (sorry for the lack of
          elegance). In particular, scan down to where Robert Patrick is saying
          "There are some problems with the servers in a cluster disappearing... "
          - Aaron
          --------------------------start of included text--------------------------
          Ken,
          The Console does not read the properties file (i.e., it is just like any
          other
          client). Therefore, it does no good to set these in the weblogic.properties
          file...
          Robert
          Ken W wrote:
          > Thanks. I tried what you said (except that we are setting thread count in
          > the properties file rather than on command line, but should produce same
          > results). We already had our classpaths set with WL sp7 stuff first, so
          > that didn't require a change. Only change was the percentSocketReaders=50
          > setting.
          >
          > Unfortunately, it didn't help any. Thanks though.
          > "Robert Patrick" <[email protected]> wrote in message
          > news:[email protected]...
          > > Ken,
          > >
          > > There are some problems with the servers in a cluster disappearing and
          > > re-appearing in the console. One thing that will help somewhat is
          > increasing
          > > the number of socket reader threads in the console to be equal to the
          > number of
          > > servers in the cluster.
          > >
          > > java -Dweblogic.system.executeThreadCount=4
          > > -Dweblogic.system.percentSocketReaders=50 weblogic.Console
          > >
          > > Also make sure you include the service pack jar files in the console's
          > classpath
          > > ahead of the weblogic/classes directory. If you are running on
          relatively
          > small
          > > boxes, you might want to run the console on a different box from the
          > servers.
          > >
          > > Hope this helps,
          > > Robert
          > >
          > > Ken W wrote:
          > >
          > > > We are using sp7
          > > > "Mark Griffith" <[email protected]> wrote in message
          > > > news:[email protected]...
          > > > > Are you using any of the latest service packs?
          > > > >
          > > > > mbg
          > > > >
          > > > >
          > > > > In article <[email protected]>, [email protected]
          > > > > says...
          > > > > > We are using WebLogic 4.51 clustered on two different servers (one
          > > > instance
          > > > > > of WL on each) with IIS as the proxy server on each as well.
          > > > > >
          > > > > > If I look at the DOS window on each, I see that the heartbeat is
          > > > detected by
          > > > > > both, so they know about one another (WL, that is), but when I go
          to
          > the
          > > > WL
          > > > > > Console application, under the cluster, it only lists one server.
          > Then,
          > > > if
          > > > > > I shut that server down and run the console again, the other
          server
          > is
          > > > > > listed under the cluster. But, I don't ever see both listed at
          > once,
          > > > and
          > > > > > when I highlight the cluster, is shows 'number of servers' under
          the
          > > > cluster
          > > > > > to be '1'.
          > > > > >
          > > > > > If I have numerous users hit our site (in our testing), all .jsp
          > > > requests
          > > > > > get proxied to the app server on the same machine. It is not
          doing
          > > > > > Round-Robin, even though it is set to do so. Thi iisproxy.ini
          file
          > has
          > > > both
          > > > > > machines listed in the cluster.
          > > > > >
          > > > > > Any help would be appreciated.
          > > > > >
          > > > > >
          > > > > >
          > > > >
          > > > > --
          > > > > ==================================================
          > > > > NewsGroup Rant
          > > > > ==================================================
          > > > > Rant 1.
          > > > >
          > > > > The less info you provide about your problem means
          > > > > the less we can help you. Try to look at the
          > > > > problem from an external perspective and provide
          > > > > all the data necessary to put your problem in
          > > > > perspective.
          > >
          --------------------------end of included text--------------------------
          "Nathan" <[email protected]> wrote in message
          news:[email protected]...
          >
          > Solaris, WL6.0 sp1
          >
          > "Mike Reiche" <[email protected]> wrote:
          > >
          > >I've seen that too in one particular configuration at a site. We never
          > >did figure
          > >out what was going on. All other clusters which ran the same software,
          > >application
          > >etc. showed up correctly in the console.
          > >
          > >What OS, WL, SP, are you running?
          > >
          > >Mike
          > >
          > >"Nathan" <[email protected]> wrote:
          > >>
          > >>I have three servers in a cluster, server A, B, and C. The console
          > >tells
          > >>me server
          > >>B is dead. However, server B is very much alive and has been fully
          > >participating
          > >>within my cluster for three days. My cookies show that server B is
          > >sometimes
          > >>the primary and sometimes the secondary server for diffrent user
          sessions.
          > >> No
          > >>matter what I try with the console, it always shows server B as dead
          > >>and that
          > >>I'm missing one server from the monitoring tab. Has anyone seen this
          > >>behavior?
          > >
          >

I requested a repair, but there was an error after clicking the button with my credit card info. I was still charged, but the form email I received the next day had incorrect info about my iPod Touch problem. How can I contact CS w/o paying $19?!

My iPod Touch battery is not working. I requested a repair through the Apple Support. On the final page, when I clicked the button that puts the info through with your credit card number, the resulting page gave an error (I wish I'd have saved it!). Anyhow, I checked my credit card and it was charged, so I assumed the repair request went through. The next day I received a form email saying my problem was with "Sync with iTunes (Not iCloud) - Data Backup/Migration (not iCloud)" instead of the battery repair. It also says for iPod customers, to send your iPod to Apple - but I had requested the "iPod Coffin" to be mailed to me so I could send it back. Obviously there was an error between the request and what was received, so I'd like to ask Customer Service about it. However, I can't find a way to contact them. When I replied to that form email, I recieved an automated reply saying emails there were not read. Anything online asks me to pay $19 and I don't have the correct issues to request an exception. The closest store is over an hour away or I'd simply go there to ask. What can I do?! Any suggestions you have are much appreciated. Thank you!
PS - The form email also says if I wait 10 days the repair request will be canceled. Does this mean my credit card will be refunded for the $85 battery replacement charge if it is canceled automatically?

Thanks, but I've been on the phone with AppleCare US (where I am and live) and AppleCare UK. They continue bouncing me back and forth without helping resolve the problem.
Perhaps someones knows how to further escalate the issue at Apple?

Storage values under about this mac displaying incorrectly, but amount of space used IS correct. Any ideas?

I noticed recently that the "storage" under "about this mac" is displaying incorrectly. It doesn't show the correct values for my photos, videos, and audio files. It classifies this data under "other". I have been searching all over the internet, I went to the Apple genius bar yesterday and they recommended I re-install OSX. I did and it still shows up incorrectly. They were baffled, said they never really came across this issue. I have tried re-indexing spotlight, that didn't seem to help.
The amount of storage used IS correct. It just doesn't show up under the correct categories in storage, under about this mac. Also, the computer seems to work fine. No real issues. It's a mid 2012 MBP. 500gb hard drive. Most recent OSX is installed.
I DO NOT think it is local snapshots, cause my backups category is small and the amount of space used and free is correct. I have downloaded omnidisk sweeper to confirm this.
I have seen a few posts on here and around the web referring to this, but no real answers. I have also reviewed Pondini's info on this to no avail.
Does anyone have any ideas?!?!

Also,
I had installed a version of parallels with windows 7, but deleted it. Would parallels be causing my computer to index incorrectly? I I used appcleaner to delete all the parallels files so I do not have it anymore.

BUG: Info panel displays incorrect Hue values

Recently, I've been doing a lot of work with color in Fireworks and came across the following bug, which appears to be a longstanding issue within the application. Rather than keeping it to myself, I figured I'd post it here in addition to submitting a bug report with Adobe. So here it is...
Hue values displayed within the Info panel (in HSB mode) do not consistently match the values displayed in the Color Mixer panel—including basic colors such as pure Yellow, Cyan, and Magenta. The values are 1 degree off—most often below the Color Mixer value, but sometimes above (as with Magenta). This holds true whether using with the Eyedropper tool or the Color Picker swatches eyedropper, and whether sampling from the canvas or from swatches.
For example, the following inconsistencies were observed when sampling the centermost horizontal strip within CS6's default Color Cubes swatches picker. Note that over 50% of these colors are affected by the issue.
The Color Mixer seems to display the correct values, while the Info panel's values appear to be incorrect. Note that this issue affects the HSB mode only; the RGB and Hex values are consistent between both panels.
This bug has been observed in Fireworks CS6, Fireworks CS5.1 and Fireworks 8 on Mac OS 10.6.8 (Snow Leopard).
Here's the bug report submitted for this issue:
Product name: Fireworks
Product Version: 12.0.0.236
Product Language: English
Your operating system: Mac OS 10.6.8 (Intel-based)
******BUG******
Concise problem statement: The Info panel displays incorrect Hue values for many colors—including pure Yellow, Cyan, and Magenta. The Hue values are usually 1 degree below the value displayed in the Color Mixer panel (e.g., 59 instead of 60 for Yellow) but sometimes 1 degree above (e.g., 301 instead of 300 for Magenta). This is true whether using the Eyedropper tool or the Color Picker swatches eyedropper, and whether sampling from the canvas or from swatches.
Steps to reproduce bug:
In an open Fireworks document, open the Info, Color Mixer, and Swatches panels. Within the Color Mixer and Info panels, set the color mode to HSB.
Draw a Rectangle and set its fill to Yellow (#FFFF00) using the Color Picker.
Observe the Hue values displayed in the Color Mixer and Info panels.
Select the Eyedropper (I) tool, and sample the rectangle's fill color. Again, observe the Hue values displayed in both the Color Mixer and Info panels.
Results: In both steps 3 and 4, the Hue value for pure Yellow (#ffff00) appears as 60 degrees in the Color Mixer panel but 59 degrees in the Info panel.
Expected results: The Hue for pure Yellow (#ffff00) should appear as 60 degrees in both panels.
Note that this issue affects the Info panel's HSB mode only; the RGB and Hex values are consistent between panels. Also note that this bug affects over 50% of the "pure" hues within CS6's Color Cubes swatches palette. For more info, see the following forum post:
http://forums.adobe.com/thread/1083391
This bug has been observed in Fireworks CS6, CS5.1 and FW8 on Mac OS 10.6.8 (Snow Leopard).

I haven't done anything other than add my footage to the timeline. I have 2 layers (1 targa seq and 1 png seq). As I move my mouse from the Timeline to the Comp Panel, the color values flash for a split second and go away. If I press Opt+1 (2, 3, and 4) the Info Panel displays the color for that one pixel but the values go blank as soon as I move my mouse. This happens in the Comp Panel mostly. If I open a Footage or Layer Panel, sometimes the values show, sometimes not. Never had this issue in previous versions.

I have an iPhone 4S and a 2012 Honda CRV . The streaming BT music is fine but now suddenly it stopped displaying song info on the screen. It worked for about 10 days and then stopped. Any thoughts?

I have an iPhone 4S and a 2012 Honda CRV . The streaming BT music is fine but now suddenly it stopped displaying song info on the screen. It worked for about 10 days and then stopped. Any thoughts?

I think that we all know the answer to this one.
Unfortunatley the device is concidered damaged by water. Apple can do an out of warranty repair which would cost $199. Generally they would just replace the device in this case for the $199.
The alternative is to Purchase a new device.

Admin Console displays wrong Hardware Scan and Heartbeat DDR times

When we open up our collections to "Show Members" and add the Hardware Scan and Heartbeat DDR display columns, we notice those times do not reflect the actual times of the last Hardware Scan listed in the Resource Explorer or
the Heartbeat Discovery time shown in the properties of the DDR. Is there an evaluation rule that I am forgetting about?

I believe that information is summarized every hour rather than displaying live info. You may have to close the node or refresh the resource to get it to update after being summarized.
I'm not finding any specific information in the documentation or anywhere in the console that this is controlled. Maybe someone else has more concrete info.
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
<-- If this post was helpful, please click "Vote as Helpful".

HT5085 Gathering Info About your iTunes Library - Keep getting Network error

I bought iTunes Match yesterday, and so far have not been able to use it.
It gets to Stage 1: Gathering Info About Your iTunes Library and makes progress, but right at the end an error box appears saying:
"We could not complete your iTunes request. The network connection was reset.
Make sure your network connection is active and try again"
Well I know the network connection is active as I was able to be charged for iTunes Match and have had no problems making other purchases. I went to Advance > Run Diagnostics Tests from Help in iTunes and ran the Network Connectivity Diagnostics and it reported no problems.
Now I know how much Apple hate giving back refunds, but if people can't help, does anyone know how I can get my money back? If I click "Report a Problem" it simply takes me to the help pages. I tried contacting support but I received an email saying they can't help.
I'm getting quite frustrated now, so I'm reaching out and hoping someone can help me?
I've copied the diagnostic results below:
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Dell Inc. Dell System XPS L502X
iTunes 10.6.1.7
QuickTime 7.7.2
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.1.1.4
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 003CA7C40B1E98E0
Current user is not an administrator.
The current local date and time is 2012-05-18 20:20:20.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce GT 540M
Intel Corporation, Intel(R) HD Graphics Family
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: bb5c046694c1f4c590202360da9f2bc5
iPodService 10.6.1.7 (x64) is currently running.
iTunesHelper 10.6.1.7 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:          {444AF521-4D63-434F-AC33-8F05DA9C6C64}
Description:          Microsoft Virtual WiFi Miniport Adapter #2
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Thu Jan 01 00:00:00 1970
Lease Expires:          Thu Jan 01 00:00:00 1970
DNS Servers:
Adapter Name:          {4F46CBF3-C53C-4615-AF14-B46B9785D100}
Description:          Microsoft Virtual WiFi Miniport Adapter
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Thu Jan 01 00:00:00 1970
Lease Expires:          Thu Jan 01 00:00:00 1970
DNS Servers:
Adapter Name:          {6D3CAB28-0C0B-4701-A440-B1A90BE75551}
Description:          Dell Wireless 5540 HSPA Mini-Card Network Adapter
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          No
DHCP Server:
Lease Obtained:          Thu Jan 01 00:00:00 1970
Lease Expires:          Thu Jan 01 00:00:00 1970
DNS Servers:
Adapter Name:          {8C130DAB-E810-4FA6-8946-1600FFE0DB2F}
Description:          Intel(R) WiFi Link 1000 BGN
IP Address:          192.168.1.69
Subnet Mask:          255.255.255.0
Default Gateway:          192.168.1.254
DHCP Enabled:          Yes
DHCP Server:          192.168.1.254
Lease Obtained:          Fri May 18 20:01:40 2012
Lease Expires:          Sat May 19 20:01:40 2012
DNS Servers:          192.168.1.254
Adapter Name:          {B32D9395-8937-42EC-BC5F-352D07958EDF}
Description:          Realtek PCIe GBE Family Controller
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Thu Jan 01 00:00:00 1970
Lease Expires:          Thu Jan 01 00:00:00 1970
DNS Servers:
Active Connection:          LAN Connection
Connected:          Yes
Online:                    Yes
Using Modem:          No
Using LAN:          Yes
Using Proxy:          No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-05-18 20:14:07.

@ deggie, I wasn't threatening ANYONE. I was simply saying how frustrating this has become, seeing how I have been trying on my own to figure this issue out for more then a month with no results. Like I said in the beginning, I have not used any other account to purchase apps or other products on my phone. I have only ever used one account. There are 23 apps that are saying they can't sync. It directs me to authorize the computer, which I do but it doesn't change the outcome. If I proceed, I lose those 23 apps correct? Do I also lose all my text messages saved, and other things such as documents in the "notes"?

Deluge and KDE - displaying incorrectly for one user only

My deluge (and possibly other gtk apps) are being displayed incorrectly in KDE. You can see the screenshot attached, but the thing I mostly notice is the progress bar. On my laptop, as well as any other user account on the PC in question, it's a very blue progress bar (so 100% torrents will be all blue, 0% no blue, and obviously in between as % increases). In the past I've messed with various gtk/kde rendering apps (so that gtk apps will display "correctly" in KDE), but I don't currently have any installed. I also have rm'ed the configs in question per the wiki ( https://wiki.archlinux.org/index.php/Un … plications ). I have tried removing the deluge config for my current user and it still doesn't "fix" the issue. I've gone through kde system settings to setting all display options to default-type options (which is what my laptop is set to).
Just wondering if anyone had any thoughts on where I could look to fix this? It's mostly an annoyance, but I've been trying to fix it for a while now so thought I'd finally ask for some help.
EDIT: I realize this should be in the Desktop/Apps sections, so if a mod could move it for me, that would be much appreciated.
Last edited by vladthedog (2013-12-05 18:08:10)

1. You said the projects were all saved "to a shared folder." Do you mean THE Shared folder? Your Mac's Users folder should list two Users, plus a folder named "Shared". Is that the folder you mean?
2. The trouble is that an iMovie project isn't actually a file. It's a special kind of folder called a package, which contains other files and folders. (To look inside the package, Control-Click on the package icon and choose "Show Package Contents" from the popUp menu.)
3. When YOU are the user and you create a new iMovie project, the package and everything it contains is configured with you as the owner. You are the designated owner of all the items that comprise the project. No one else can Write to the project.
4. To change that, you have to change the project package into a normal Finder folder, adjust its permissions and the permissions of all the contents of that folder, then change it back into an iMovie package.
Here's how:
In the Finder, choose Finder > Preferences. Click Advanced and turn ON "Show all file extensions".
The name of your iMovie project "My Sample Project" is now displayed as "My Sample Project.iMovieProject" in the Finder.
Remove ".iMovieProject" from the project name, removing the period. When the Finder asks, say OK.
The project package has now turned into a folder. Select the folder and choose Get Info.
Set Others permissions to "Read & Write". Then click "Apply to enclosed items". When the Finder asks, say OK.
Select the folder name again and add the extension ".iMovieProject" to the name. The folder will change back to an iMovie package.
The package will now allow anyone to Read and Write to the project.
Karl
PS: This solution isn't very handy, obviously, but it does the job. A better solution is to buy an external hard drive, and configure it to Ignore permissions. (In the Get Info window for the disk.) That lets both users save projects to the drive without permission issues.

ITunes and Finder - how are info about audio files refreshed?

I am now in the process of embedding artwork in my mp3-files using CoverScout. I have also updated info about all my tracks in the iTunes after embedding the artowrk, by selecting all the files and clicking GeitInfo and clicking OK (without making any changes). All albums are displayed correctly with new artworks. This, however, is not the case with the Finder.
Generally, if a mp3-file has (embedded) artwork then the file would be displayed as a thumbnail of the artwork in question. The thing is that the icons for the mp3-files that were recently embedded with artworks are displayed as lacking artwork (they are displayed with the simple iTunes icon). Moreover, the Preview of GetInfo window does not show that the mp3-files contain the embedded artwork. The files are not refreshed. However, if I copy or duplicate those files then the copied files are displayed correctly, with the right getinfo. This, however, does not work if moving files. The files are not refreshed when moved, only when copying or duplicating.
I find it curious that Finder does not refresh the files, even after restarting the Mac, given the fact that iTunes have the information that there is artwork. Is there a way to refresh the files in the finder without copying or duplicating the files?
Another curious thing with albums containing tracks with embedded artwork is as follows: the Finder displays some of the tracks as thumbnails of the artwork in question, but not with all the files. The same goes for the Preview of the files in GetInfo. Some have the correct Preview displaying the artwork, but some lack the info about the artwork in the Preview. Why are not all files displayed as having embedded artwork, but only some, given the fact that they belong to the same album and the artwork was embedded in the same way?
The same goes when I embed the artwork without CoverScout, by updating multiple files through iTunes (dragging the artwork to the Artwork-field in Info). The Finder does not display that the files are embedded. I must copy or duplicate these files in order to refresh the info.
A more general question: how do I refresh files in the Finder? There is no refresh button, as in the Windows.
I would appreciate your help.
Kind regards
Alex

I was wrong about one thing concerning refreshing the files. I said that restarting the Mac would not refresh the files. However, if the iTunes have info about album's/tracks artwork then the Finder will also have this info after rebooting the system. My question is whether the Finder can be refreshed, without rebooting (restarting)?

Info about tracks seems to stick even though I change it

I put an audio book onto my iPod shuffle 4th (or maybe 5th) gen. To start with the order was messed up. Both listing-wise in iTunes and playback on ipod. I then worked out how to order this particular audio book correctly (by using disk numbering, 1 of 3, 2 of 3, 3 of 3), and this got the order correct as listed in iTunes. But the incorrect ordering stuck so far as playback on the iPod went. So, just to clarify: Correct order listed in iTunes, wrong order played back on iPod.
I tried deleting all the audiobook files from the iPod and recopying them back on. Various other changes to try and get the right ordering to stick -- for playback. But no. The ordering remained messed up on playback, but looked fine in iTunes order.
What I had to do to fix this was reset the iPod back to its factory settings, then copy the correctly listed audiobook onto the iPod. Then the playback order was correct.
My question (becuase I've now got a similar but different problem): How to achieve what I achieved by resetting back to factory settings and copying files on again, without doing a factory reset? How to get info to stick, take effect, on the iPod? It seems the iPod, once it gets a version of a bunch of files, won't allow you to change that info about those files. Please help. I'm really struggling with this iPod. I can programme C and PHP etc. but I can't get my iPod to work properly. Really not happy.

where can I ask questions and find out the answers about this stuff that just doens't seem to be working correctl? where can I get an actual answer? fgh`oi sdfhgeuwihgFeiouwEFEFWwhere can I ask questions and find out the answers about this stuff that just doens't seem to be working correctl? where can I get an actual answer? fgh`oi sdfhgeuwihgFeiouwEFEFWwhere can I ask questions and find out the answers about this stuff that just doens't seem to be working correctl? where can I get an actual answer? fgh`oi sdfhgeuwihgFeiouwEFEFWwhere can I ask questions and find out the answers about this stuff that just doens't seem to be working correctl? where can I get an actual answer? fgh`oi sdfhgeuwihgFeiouwEFEFWwhere can I ask questions and find out the answers about this stuff that just doens't seem to be working correctl? where can I get an actual answer? fgh`oi sdfhgeuwihgFeiouwEFEFWwhere can I ask questions and find out the answers about this stuff that just doens't seem to be working correctl? where can I get an actual answer? fgh`oi sdfhgeuwihgFeiouwEFEFWwhere can I ask questions and find out the answers about this stuff that just doens't seem to be working correctl? where can I get an actual answer? fgh`oi sdfhgeuwihgFeiouwEFEFWwhere can I ask questions and find out the answers about this stuff that just doens't seem to be working correctl? where can I get an actual answer? fgh`oi sdfhgeuwihgFeiouwEFEFWwhere can I ask questions and find out the answers about this stuff that just doens't seem to be working correctl? where can I get an actual answer? fgh`oi sdfhgeuwihgFeiouwEFEFWwhere can I ask questions and find out the answers about this stuff that just doens't seem to be working correctl? where can I get an actual answer? fgh`oi sdfhgeuwihgFeiouwEFEFW

How to get info about the mobile, like screensize...

hi,
i need some info about the device my midlet is running on.
how is it possible to get info about the screensize, screentype(color/black) and perhaps devicetype or modelname?
i already read it somewhere but i didn't find the source again.
tia
mmkl

thx,
the example below shows some basic information.
Display myDisplay = Display.getDisplay(this);
Displayable dis = myDisplay.getCurrent();
int high = dis.getHeight();
int width = dis.getWidth();
boolean isCol = myDisplay.isColor();
int nubCol = myDisplay.numColors();more detailed information about model, aren't available through the standard api, on blackberry's there some restricted apis that provide these device-type and other detailed information...
for more basic information, just look at the class-methods from display and displayable...
mmkl

How to get info about updates' repo and versions, including AUR pkgs

I'm writing a little tool in python that checks for updates and displays notification in gnome about available updates. I'm doing this by syncing database to custom directory with:
pacman -Syb /custom/dir
and then getting list of updates with
pacman -Qub /custom/dir
I do it this way because I don't want to sync my real pacman database until I'm actually installing or updating packages. I then get current version and repo of the listed packages with:
yaourt -Q | grep "list\|of\|packages"
It's quite long and seemingly wasteful procedure, but an even bigger issue is that I don't know how to do the same thing with packages from AUR. Looking at the yaourt's man pages I see no option to sync database into a custom directory.
Any suggestions?

Camus wrote:
The author of that blog post used cower instead of yaourt, but I don't think cower allows me to sync AUR database into custom dir either. Or am I missing something? I don't how yaourt and cower sync AUR database anyway.
I actually already wrote such notifier for gnome in bash. But I want to display more info and I want to include AUR packages.
The perfect tool in my situation would be something that allows me to sync official and AUR databases into custom dir and then displays list of updates with:
-name of package
-current version
-updated version
-repo
I can currently do all of the above, but just with official repos and not as elegantly as I want.
Not sure what you mean by 'sync AUR database' (no such thing exists as it does for the binary repos), but cower will let you download to wherever you want.

Error handling: Customizing error details: Info about the the path to the VI which has thrown the error

Hi,
I need a quick advice about how to display in the error cluster the information about the path and VI which has thrown an error.
When I don't prepare my own error message, and the error is captured automatically, the information about the path, Vi name and calling VIs is presented automatically.
When I prepare/define my own basic error cluster I have only what I define in the string part of the cluster.
How to cause tha apperance the path and VI name in my defined error message?

MimiKLM wrote:
You mean this link
That's helpful too but, I had read "When I prepare/define my own basic error cluster I have only what I define in the string part of the cluster" as you wanted to use a file to expose those custom error codes and ultimately ship them with your solution dynamically rather than statically
The error ring will pick up any custom errors you define in the error file(s). Including formatting! this then populates the explain errors and error dialogs just like any error definition that ships with any LabVIEW component or toolkit.
Certainly, an error ring can also STATICALLY define or re-define an error within the application instance the ring is called from. Those Error Rings are quite flexible!
Jeff

Info about the RFC

Hi,
I have to work on RFC FM. Can any body give me the info about the RFC? especially for Function module?
Will give Reward points
regards,Ram

Hi
RFC (Remote Function Call) is similar to the general SAP fun module: except that in the attributes you click the radio button: RFC enabled;
and you will be passing an Import parameter DESTINATION to it.
Other code and usage will be similar to any fun module;
Have a look at any fun module in SE37 to understand better about the different components of Fun modules;
Refer this link:
http://help.sap.com/saphelp_nw04/helpdata/en/22/042518488911d189490000e829fbbd/frameset.htm
Function Modules doc
Function Modules;
Check this matter.
Function Modules are Global ABAP programs created by SAP for reusable purpose.they have IMPORT,EXPORT and TABLE parameters, and EXCEPTIONS to through when error occurs.
You can create them from TCode SE37.
Go through the following doc:
Function modules are cross-program, reusable procedures that are organized into function groups, and whose functions are implemented between the statements FUNCTION and ENDFUNCTION. Function modules and their interfaces are created in the Function Builder.
Function Module Interfaces
The parameter interface of a function module is defined in the Function Builder. It includes the definition of interface parameters and the specification of exceptions that can be triggered by a function module. The Function Builder automatically generates comment lines below the FUNCTION statement in the source code of the function module, which represent the interface of the function module with the following syntax:
Syntax
... [IMPORTING parameters]
[EXPORTING parameters]
[CHANGING parameters]
[TABLES table_parameters]
[{RAISING|EXCEPTIONS} exc1 exc2 ...]
The syntax and semantics of IMPORTING, EXPORTING, CHANGING, RAISING, and EXCEPTIONS mainly correspond to the definition of method interfaces with [CLASS-]METHODS. The additional option of defining table parameters using TABLES is obsolete.
Interface parameters
The interface parameters are defined on the relevant tab pages in the Function Builder.
IMPORTING parameters are input parameters. When the function module is called, a suitable actual parameter must be specified for every non-optional input parameter. The content of the actual parameter is passed to the input parameter when the call is made. The content of an input parameter for which 'pass by reference' is defined cannot be changed in the function module.
EXPORTING parameters are output parameters. When the function module is called, a suitable actual parameter can be specified for every output parameter. The content of an output parameter that is defined for 'pass by value' is transferred to the actual parameter if the function module is completed without errors. An output parameter that is defined for pass by reference is not initialized when the function module is called.
CHANGING parameters are input and output parameters. When the function module is called, a suitable actual parameter must be specified for every non-optional input or output parameter. When the function module is called, the content of the actual parameter is passed to the input/output parameter, and when the function module is completed, the content of the input/output parameter is passed to the actual parameter.
TABLES parameters are table parameters. Table parameters are obsolete CHANGING parameters that are typed as standard tables with a header line. If an internal table without a header line or a table body is passed as an actual parameter to a formal parameter of this type, an empty local header line is generated in the function module. If an internal table with a header line is used as an actual parameter, both the table body and the header line are passed to the function module. Pass by value is not possible in formal parameters defined using TABLES. Formal parameters defined with TABLES can be replaced by formal parameters defined with CHANGING. A local work area can be created for the internal table in the function module by using the addition LIKE LINE OF itab of the DATA statement.
Exceptions
The exception of a function module are defined on the Exceptions tab page in the Function Builder. Here you can select exception classes to define whether class-based exceptions are declared or non-class-based exception are defined. Class-based exceptions are represented in the above syntax by RAISING, and non-class-based exceptions are represented by EXCEPTIONS.
The addition RAISING is used to declare class-based exceptions that can be propagated from the function module to the caller. Exceptions in the categories CX_STATIC_CHECK and CX_DYNAMIC_CHECK must be explicitly declared, otherwise a propagation can lead to an interface violation. A violation of the interface leads to the treatable exception CX_SY_NO_HANDLER. Exceptions of the category CX_NO_CHECK are implicitly always declared. The declaration of exceptions of the category CX_STATIC_CHECK is statically checked in the syntax check. For exceptions of the category CX_DYNAMIC_CHECK, the check is not performed until runtime. In a function module in which class-based exceptions are declared with the RAISING addition, the statement CATCH SYSTEM-EXCEPTIONS cannot be used. Instead, the relevant treatable exceptions should be handled in a TRY control structure.
The addition EXCEPTIONS is used to define a list of non-class-based exceptions that can be triggered in the function module using the statements RAISE or MESSAGE RAISING. Exceptions defined in this way - as with formal parameters - are bound to the function module and cannot be propagated. If an exception of this type is triggered in a function module, and no return value has been assigned to it with the homonymous addition EXCEPTIONS of the CALL FUNCTION statement when the call was made, this leads to a runtime error.
Note
For new developments after release 6.10, SAP recommends that you work with class-based exceptions that are independent of the function module.
RFC is a technology which is used to access a functions (Modules) from
the remote systems.
If a function module is set as remote enabled which can be access from
the remote system via RFC.Eg: U can access the Remote enabled function modules in ur VB,Webdynpro,Java,Visual composer program.
A function module can be set as remote enabled by SE37->Go to ur FM->click the option Button "remote enabled".
But Normal function modules can not accessd from the remote system.
Good Example for RFC enabled function module is : BAPI(Business Application Programming Interface)
Note: All BAPIs are Remote enabled but not all remote enabled function modules are BAPI.
CALLING A FUNCTION MODULE:
1)In U ABAP Editor --> Click "Patter" ---> Selection Option Button "Call Function"
--> Write the Corresponding FM name --> Hit Enter
2)The appropriate import ,export Parameters will be displayed in ur editor
3)Pass the Values Here.
Also check these links.
http://www.geocities.com/victorav15/sapr3/abapfun.html
Check this link:
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/d94b78ebf811d295b100a0c94260a5/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm
Check this link:
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/d94b78ebf811d295b100a0c94260a5/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm
See the following links:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/26/64f623fa8911d386e70000e82011b8/content.htm
Reward points for useful Answers
Regards
Anji

Re: Console displaying incorrect info about cluster

Similar Messages

Maybe you are looking for