Re:  Creating blue print of company have footwear ,lfr and jewelBI project

Hi expert,
This is pradeep .right now my project in blue print face so that i required  blue print regards of footwear ,large format stores and jewellery in  BI project my id is [email protected] . I will be assign the point
regards
pradeep.kandepu
Edited by: pradeep kandepu on Jun 10, 2008 1:32 PM

Hi,
check ur mail.
Thanks & regards,
Leena Sharma

Similar Messages

  • The apps I created from "add to homescreen" have turned white and have a few lines and circles in it. How can I get the picture back on them?

    The apps I created from "add to homescreen" have turned white and have a few lines and circles in it. How can I get the picture back on them?

    Those aren't apps; they're bookmarks to websites. Have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears? If all else fails, you can just re-do the shortcuts.

  • Creating Blu-Ray DVD with Final Cut Pro and Adobe Encore

    Hi all,
    I am one of many with troubles creating a blu-ray DVD using Mac software. Sounds like the best way to do this is to do all of the editing in Final cut and create the DVD in Adobe Encore. Is there a way to export to Adobe Encore or should I just create a .mov file and import that to Encore. That way I think I lose the HD quality. I read that I could compress to Blu-ray format in Compressor, but I can only find HD DVD which is different. When I select create a Blu-Ray disc, Compressor won't simply create the file on my computer...it wants the disc to create.
    Maybe I am a little to new at this to fully understand, but why in the heck doesn't Apple get with the times and create a DVD authoring program that makes Blu-Ray?
    Thanks for any help you can offer.

    I have just completed my first blu-ray disc using FCP7 and Adobe encore. My workflow, once the timeline was complete, was to go to File>share>choose blu-ray as destination >export. The default encoding is H.264 along with an ac3 file for audio. It took 3 hours and 35 minutes to encode the 1hr 26 minute file.
    Opening encore, confirming you settings for HD, and choosing file>import>as asset each of the files (separately, of course). Encore imports them, then under Timeline>create new, then drag the files to the timeline. CLick on the build button and you are there. I did not mention that my original render was Prores422, but that should not matter here. No trouble with burning the Verbatim 25Gb disc.
    Encore will recognize that these files do not need re-encoding and burn the disc. It took 1 hour and 40 minutes to burn a 1 hour and 26 minute (17+ Gb) movie on an i7 iMac with an OWC 12x BD burner.
    Hope that helps

  • I have only ipad2 and DESKJET 3050a and router I need step by step instructions to print. Via air print.Thanks., I have only ipad2 and DESKJET 3050a and router I need step by step instructions to print. Via air print.Thanks.

    I have OS5 on my IPad.

    You first need to setup the printer with your computer to use it wireless with your router. Use a Static IP address for the printer on your router.
    Then be sure the iPad is on the same WiFi network and the printer is on.
    Then you can use this Apps on your iPad;
    http://itunes.apple.com/app/hp-eprint/id299531647?alreadyRedirected=1&mt=8
    You can also try this App; http://itunes.apple.com/app/hp-printer-control/id469284907?alreadyRedirected=1&m t=8

  • I keep getting a "Transcoding error" when I try to burn a blu ray. I have elements 8 and the clip is only about 8 1/2 minutes long

    I have 4gb of ram and running Vista. Dont know why I keep getting this error, its not like I'm burning a full 2 hour movie.
    any help would be appreciated.

    b
    Thanks for the update.
    Please remind me, are you still working with Photoshop Elements 8 and Premiere Elements 8.0/8.0.1, and are your plans to incorporate your new internal hard drive into the Windows Vista 32 bit computer setup?
    In Photoshop Elements 8, the path to the Scratch Disks should be Full Editor/Edit Menu/Preferences/Performance and the available Scratch Disks choices there. See Description under the Scratch Disks list for overall suggestions.
    In Premiere Elements 8.0/8.0.1, the Scratch Disks will be found under the program's Edit Menu/Preferences/Scratch Disks.
    Just do not move, delete, or rename any files/folders that are source media in a saved/closed project.
    Major consideration is to check the new drive periodically to confirm that the drive letter is ot changing on you.
    Did you know that you can import a raw format image into Premiere Elements, but you need to install the Camera Raw plug-in in Premiere Elements as well as Photoshop Elements. But, in a 32 bit operation and dealing with the huge dimensions of the raw image, image size is going to be a consideration in Premiere Elements 8.0/8.0.1.. The program will not let you import a still image with a total pixel count greater than 16777216 pixels.
    ATR Premiere Elements Troubleshooting: PE: Maximum Still Image Size
    More later. Sounding good.
    ATR

  • I have installed wireless printer via the time machine/airport extreme base. Added the printer via the bonjour. There are times when the printer will display a black plug and won't print. I have to uninstall and then reinstall the printer.

    What does the black plug display mean?

    Get an Airport Express. Plug the printer into the AE with a usb cable and set up the AE to be part of the network (get an IP address from your router). You can get an older AE inexpensively on eBay.

  • When I include a web link in my Hotmail email, it isn't blue. My recipients have to 'cut and paste' my links to use them. With Explorer the links are blue and folks just 'click' on them. Is there a setting in Firefox to allow links to be 'clickable'?

    Is there a setting to change to make included links in my emails true links instead of 'cut and paste' links?

    '''I fixed mine by removing the Ask.com extension.'''
    Tools
    Add-ons
    Settings icon
    View Recent Updates
    Ask.com '''DISABLE'''
    Running FF 8.0 on Windows 7 (64-bit)

  • Blue print on SD

    I have to create blue prints on different modules.
    can guru help me in this?
    I need a copy for reference.
    vijay
    [email protected]

    Hello SriMal,
    Please go through these links
    http://help.sap.com/bp_biv235/BI_EN/html/BW/SalesAnalysis.htm
    http://help.sap.com/bp_biv235/BI_EN/html/BW/CrossFunctAnal.htm
    http://help.sap.com/bp_biv235/BI_EN/html/BW/SalesPlan.htm
    http://help.sap.com/bp_biv235/BI_EN/html/Business_Blueprint.htm
    Regards,
    Praveen

  • WM Business Blue Print & Configuration Guide

    HI Gurus
    I am SD consultant, Could anybody provide me the Business blue print for SAP Warehouse Managment. 
    And Step by Step configuration guide.
    we already had implemented  FI,CO, SD, MM, PP, PM
    We are a Beverages Company ( Pepsi Cola ).
    I have maintained my SDN Business Card.
    Regards\Adnan

    Adnan,
    Each BB is different, both in scope and in content, depending on the needs of the client. 
    I cannot give you any specific examples because each BB is confidential.
    SAP offers a BB preparation guide, which explains how to build a Business Blueprint.
    http://service.sap.com/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700002908402002E
    to get you started.  Good Luck!
    Regards,
    DB49

  • How do I create Blu Ray Disc with DVD Studio Pro ?

    Folks, I think that I'm in trouble... I created 3 HD projects with DSP (i do not have the tapes and fcp project anymore, neither the HDV 1080i mov file) and I need to be burned it with a Blu-Ray Media, and play it with a BR Player... So far I made the following steps:
    1-) In FCP, I exported some Quicktime Movies with HDV 1080i60 codec (movie with chapters, menu bg movie, extras).
    2-) In Compressor, I used the preset HD MPEG-2 19,0 MBPS for videos, and Dolby digital professional 2.0 for audios.
    3-) In DSP I created a HD DVD Project (DISC window, GENERAL tab, DVD STANDARD = HD DVD; DISC WINDOW, DISC/VOLUME tab, DISC MEDIA = BLUE LASER, LAYER OPTION = OTP) with movies, extras, menus...
    4-) In ADVANCE BURN (under FILE MENU) I chose BUILD.
    5-) Now I got a HVDVD_TS folder, with my movie compilation...
    NOW, my doubt is... The folder HVDVD_TS can be burned on a BR Media and be played on a BR Player ?
    If not, what can I do with my HVDVD_TS folders to be compatible with Blu Ray ?
    thanks a lot for any help.
    Best Regards
    Marcelo

    That can't be done. Get the tapes back and start over. Get the new Toast in the tutorial I posted to make a Blu ray disc.
    You could try this tool to demux the streams, transcode to QT then re-encode for Blu Ray but I wouldn't go that direction unless you know what your doing. You would also be encoding twice which is not good.
    Get the original source back and go the toast route from the start.
    Message was edited by: Eric Pautsch1

  • Blue print documents needed.

    Hi All,
    Can anyone please help me with a Blue print document of Negative Time Management and OM. This is immediately required as i have my first project starting.
    Any assistance will be of great help.
    Thanks

    Please give me brief idea about Blue Print documents in XI, who will provide it, and who will use it
    there is normally a team who is assigned with the duty to perform requirement gathering......additionally there may be a team who consolidates all these reqs and builds the blueprint documents out of it....same may be the case in your project....get these details from the person handling your project.....usage of these documents is for the entire projecvt team
    How the business process in XI is designed, who will design it, How many Integration scenarios it will consist,
    business process is developed by the functional and techinal consultants.....
    Number of integration scnarios are not fixed/ limited and nobody in SDN can predict it for your project....this Q will be best answered by your manager....

  • Bussiness blue print for SFC

    Hi all,
    How to prepare business blue print for SFC(shop floor control) in PP.What are all aspects we need to consider to prepare blue print.if you have any document plz mail me at [email protected]
    Thanks a lot
    pavan

    Check the following LInks,
    http://www.abs-europe.com/assets/Image/FAQ/What_is_an_SAP_Business_Blueprint.pdf
    http://help.sap.com/saphelp_sm40/helpdata/en/45/f6da633a292312e10000000a11466f/content.htm
    http://www.sapfans.com/sapfans/asap/be_04_e.htm
    http://www.idi.ntnu.no/emner/tdt4730/pdf/ch2.pdf

  • As Is , To be and blue print difference

    HI,
    Please explain the difference between AS IS, To BE and blue print, If you are following ASAP do we prepare all three documents or just Business blue print is prepared. And what is Business Process Procedure documents and when we prepare this business Process Procedure docs too.
    Thanks in advnace..
    Regards,
    Manish

    HI Manish,
    When you are working on a project you will have different business process (like business process to make payments to Vendors). The existing process in organization is what is detailed in AS IS. Implementation of SAP may simplify the business process and hence modifications to the AS IS. The TO BE Process details the process going forward. The business blue print document captures both AS IS and TO BE processes and the reasons for moving towards the TO BE Process.
    In the ASAP methodology you do capture AS IS and TO BE both.
    Regards

  • Business blue printing doubt

    Hi all,
    i am doing an implementation (business blue printing phase)
    I have a requirement from the business users they have given some KPIs and reports based on these
    KPI's but i am not sure to which value they are actually looking at like we have sales quantity in controlling as well as in SD.
    and also moving average price is in product costing ..so i have asked my functional consultants to give me the list of fields of the KPI's given by the business users
    in an assumption that i can be sure that i will pick the right datasource if i exactly know the field.
    am i on the right track r else am i unnecessarily wasting the time...will it be of any help to me please kindly confirm
    thanks and regards
    neelu

    Hello Neel,
    yes. For eg. if the users are posting billing documents and want to report on sales values or quantities based on total billing docs posted, then you can use the datasource 2lis_13_vditm meant for billing.
    you can also refer to best business practices for standard scenarios and try to match with the business reporting requirements.
    You need to find out the exact transactions in R/3 based on which they want to carry out reporting. The transactions in R/3 mostly have standard datasources related to them.
    for eg. purchase orders/scheduling agreements in R/3 will have datasources in applicatio component 02. The material movements posted including goods receipts, issues, stock transfers will have datasources within 03 applicatio component.
    the billing docs can be seen in sales application components, whreas the quality notifications can be found in 05 appliation components.
    check out rsa5 in R/3 for available datasources and check out the respective business content for standard cubes, queries available for these datasources.
    Hope it helps..
    thanks,

  • Create a Print Preview

    Hi, how can i create a print preview for a Text Component and/or a JTable (or any other component)?
    I know that i must write the print method but i need some intresting examples of all the classes that i have to develop.
    Thanks

    If you only want to print content that can be
    displayed by a JEditorPane then you may want to check
    out my DocumentPrinter, which you can get from
    http://www.dcs.shef.ac.uk/~mark/software/swing/
    As well as printing Documents that can be loaded by a
    JEditorPane it also allows you to specify headers and
    footers and provides a print preview dialog box.
    At the moment it works but it could do with some
    improvements including memory usage which I'm
    currently working on. Any feedback if you do use it
    or feature requests would be appreciated,
    MarkHi Mark,
    I must commend you for developing such a wondeful java printing solution (Document Printer). I have a question, is it posible for me to be able to call a new page from my code. I have generated some pay slips from my application with HTML and i want only 2 pay slips per page. Is it possible for me to call a new page from my code using document printer....please i need it badly...
    Thanks
    Jaji Lukman

Maybe you are looking for