Read only rows in input-ready query ?

Hi experts,
I would appreciate your advice on the following issue: I have built an input ready querry with structures both in the rows and columns area. The aim is to make some of the rows read only.
I have tried to set the elements that I only need for display to "Not Input-Ready (Not relevant for locking) in the Planning Tab, for the rows structure, but this doesn't work. It seems that the setting to "Inpou Ready" for the columns tkaes precedence...
If you can think of any other way to solve this problem, please post a reply.
thanks in advance!
Andreea

Hello Andreea,
set a data slice on the values which you do nat want to be changed.
Or exclude the values from the planning filter and include them into query with constant selection.
Regards,
Cornelia

Similar Messages

Can we display comments row for row in Input Ready Query...

Dear All,
Currently I have created Web template with Signle Document. When executed it in the Portal it will come up with a "Save" and "Cancel" button of its own and can allowing me to capture comment here & Finally Click on SAVE button which was stored in Documents area in RSA1.
Now I am was trying to figure out to display comments Row for Row in Input Ready Query...
Can you give ideas on this...

Check link http://help.sap.com/saphelp_nw04/helpdata/en/1e/99ea3bd7896f58e10000000a11402f/frameset.htm
In query properties in BEx query designer you have to do settings to - Display document links
For metadata, master data, and InfoProvider data for a query, you can display links to Documents that you have created for these objects. If documents exist for these objects, the symbol appears next to these objects. If you click on this symbol, you jump to where the document is displayed on the Web.
Highlight the appropriate setting so that the document links for the desired document class are displayed. The document classes are oriented to the various categories of BW objects. InfoProvider data, metadata and master data.

Fields in Input Ready Query and Aggregation Level

Hi All - New to IP. What if we dont include all the fields of Aggregation level in Input Ready Query.
Supose there are 4 fields in Aggregation level and we are including only two in Input Ready Query.

Hi Harry,
For a Keyfigure to be input ready, all the characteristics of the Aggregation should be filled with some values at the time of input.
The characteristics should be either in Static Filter, Dynamic Filter, Row, Column. New Selection.
If a characteristic is not there in any of the above area then it is considered to be null and query will not be input ready.
Regards,
Gopi R

Input ready query and display only rows

I am trying to replicate scenario which is equivalent to creating manual layout in SEM-BPS with settings for layout category - Key Figures in Data columns, and rows defined individually. In this version it is possible to restrict certain rows as comparision only.
How can I acheive this using Input ready query? In my query I have created a strucure for Planning Items, but I am not able to show certain planning item selections as display only.
Any thoughts?

Hello Gregor,
Thanks for you answer.
I already have two structures as mentioned by you.
Can you please let me know what exactly you meant by set the input flag on the cell level? What settings I have to change to set the flag, do I have to use any formula? In my example I have three rows for Planning item row structure and I want only one row to be selected as display only row.
Regards,
Sachin

Input Ready Query, Variable read mode setting Only Values for InfoProvider

Hi,
I have a problem with Selection Variable for a BEx Query :
- I'm working with SAP BI 7.0 support package 15
- My query is an input ready query built for an "aggregation level" based on "real time infocube" (Planning);
- Characteristic, I want to filter with variable, has query property Advanced->Query Execution for Filter Value Selection = Only Values in InfoProvider
- Characteristic (info-object) has set the property: Business Explorer tab--> Query Def. Filter Value Selection as Only Values in the info-provider...
My problem is:
when I execute a query,
the Select Values for Variables screen appears
I push on the Select from List button
and Select Values For MyCharacteristic appears...
but it shows me all values in master data table of my characteristic instead of only values in the infoprovider!!!
If I build a query for the Real Time Cube it works correctly, but if the query is built for the aggregation level it doesn't work!
Could someone explain me why it doesn't work correctly?
Thanks in advanced
Fede

Thanks to Mariana Lazar
30.03.2009 - 12:30:36 CET - Risposta by SAP
Dear Fede,
Regarding the query built on aggregation level please note the following
the aggregation level is always a Virtual Provider built other
InfoProvider and hence it does not have the dimension table and hence
the F4 mode D is not supported.
Therefore when aggregation level is used in a query, F4 does not supportD-mode: 'Only Values in InfoProvider' and all master data values are
displayed in the value list.
Reference from the note
984229 F4 modes for input help as of SAP NetWeaver 2004s BI
4. Since other InfoProviders do not have a dimension table, the system
displays only posted values if you select "Only Posted Values for
Navigation". Otherwise, it displays the values from the master data
table.
Hope this should clarify your doubts. Please let me know if you have
questions else please confirm the message at your earliest convenience.
Thank you for your cooperation and kind regards,
@KR@ Mariana Lazar
Senior Support Consultant
SAP Active Global Support
Netweaver Business Warehouse

Adding new rows in the input-ready query

Hello everybody!
Could you please advise what setting should be done in the ready for input query to make it possible to add rows in it.
I succeeded in creating input ready queries where it is possible to modify key figure value for the existing records, but I haven't succeeded yet in creating query with input-ready rows.
Thank you in advance,
Kind regrds,
Maria Kazakova

Hi Gregor!
Thank you.
Of course before posting a question, I've read this help topic attentively.
I created Aggregation level ZPPLAN with characteristics:
 Version
 Cal. Year/Quarter
 Currency
Key figure:
 ZSUM_BDG
Query ZPRQUERY3 is based on aggregation level ZPPLAN
Query settings:
Rows:
 Version
 Cal. Year/Quarter
 Currency
Key figure:
 ZSUM_BDG
in the key figure properties, tab Planning option "Data can be changed using user entries or planning functions" is selected.
Execution of the query returns the table with input-ready cell and empty new rows doesn't present.
so could you please advise what else settings should be done for query, to make input ready rows available in the query? so as to make it possible to enter new records in the input ready query?
Following settings are done for the Analysis Grid properties:
tab "General":
- Display sort icons
- Apply formatting
- Allow navigation
- autofit
- Display hierarchi icons
Tab "Clipping":
Full size for horisontal and vertical.
Sorry for so long quetion,
I would be grateful for an answer,
Kind regrds,
Maria Kazakova

Input ready query---structures used in rows

Hello All,
I have a problem in reporting, I have infoobject this object used in filter and rows, rows i am using the structure.
in structure i am using the all budget categories.
in that case: input ready query not working its disabled the cells.
i have a doubt , structures can be used in input ready queries or not.
please help..
Regards,
ch.

Hello Ashish,
I didn"t understand, what u written, can you expand clear and also provide some example. if you don't mind.
I am create a structure and under structure i am using the NewSelection in rows.
i am getting problem: the input ready query is not allowing the values because of its disabled the cells.
regards,
ch.

Problem with input ready query with structure in Rows

Hi,
First I have created an input ready query without a structure where I have GL accounts in rows and key figures in column. It works and I can see that the cells are ready for input when I launch it in web through query designer.
Later, I am replacing the GL accounts in rows with a structure. Each line in the structure is combination of GL acctUoMChart of Acct (all restrcited to single values). Here comes the issue. When I run the query again (launching thru query designer) it dumps. Any idea?
Also, please let me know whether the planning applications can be made using BEX analyser OR WAD ?
Thanks a lot in advance.
Regards,
SSC
Edited by: sapsem con on Feb 19, 2009 2:38 PM

Hi,
Can you check ST22 for the dump analysis.
Also, planning applications can be built using BEx analyzer or WAD.
Check this link for example and step-by-step procedure to do the same.
http://help.sap.com/saphelp_nw70/helpdata/en/43/a18462c8291d9be10000000a1553f7/frameset.htm
Regards,
Deepti

Input ready query on Multiprovider displays two row for two Infoproviders

Hello experts,
We are using below design to develop an input ready query.
                   Input ready query
                       Multiprovider
Aggregation level 1      Aggegation level 2
Realtime cube 1            Real time cube 2
As we are developing Input ready query on multiprovider, it is automatically creating characteristic named 0INFOPROV at multiprovider and query level. 0INFOPROV contains values of Infoproviders on which multiprovider is created.
char1 cha2 Infoprovider                    key1     Key2
R1       #       Aggregation level 1        10          #
        P1     Aggregation level 2         #              20
During planning, we have to plan on separate row for each infoprovider.
is there any way we can avoid this issue and perform planning on single row for both infoproviders?
Thanks,
Mitesh

Hi,
Please refer following document.
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70dcd7b5-6a3d-2d10-c984-e835e37071a2?QuickLink=index&overridelayout=true|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70dcd7b5-6a3d-2d10-c984-e835e37071a2?QuickLink=index&overridelayout=true]
This Documents gives step by step procedure to combine thw rows with # iand with char value nto a single row.
Regards,
Geetanjali

WAD input ready query with new blank rows

Hi all,
İ need to make an input ready query in wad with new blank rows under report.
in mu query i can see posted values where i need blank rows as well.
i have set number of new rows in analysis item.
what else i should do.
when i run my query, it gives warning that i have no columns that i can enter manually.
Any help?
thanks

Hi,
A few points that you should check:
1) Whether all characteristics of the Aggregation level are restricted to one single value except for characteristics included in the rows;
2) Whether all the characteristics included in the rows are displayed with the Key (with or without text);
3) If you have a Unit characteristic in the row, it still has to be restricted to a single value in the filter.
These are some of the typical reasons why I have encountered the same problem!
Regards
Sriram

Insert new rows in a input ready query

Hello,
I have to build an input ready query in which the users should insert new records.
In the "old" transaction BPS0 there was an option to do this but now I'm using RSPLAN for planning...
What is the best way (or maybe a good way) to build this input ready query?
Thanks a lot

Hi,
If these characteristics have no char relationship you can add new rows as follow:
All the characteristics you have in your aggregation level must have single values in your input ready query. So restrict by variables or put them in the layout (not as a free-characteristic). In the front-end tools you have a select option to "Insert new lines". If you have added this you can add new records to your query. If you hover over a input cell and press F4 the user will get an input help.
Hope this helps.
Regards,
Juriaan

How to allow users to record new lines in an input ready query?

Dear All,
I am using BI integrated planning (NW2004s) and I would like to create an input ready query with account numbers in the rows. I drag 0ACCOUNT into the line field in the BEx Analyzer which has many individual values in the relevant filter.
I do not want to show all possible account values in the rows automatically (there are too many accounts) but I would like if the user write the desired account numbers by hand or select them from a list of possible values.
In summary, I would like to create a solution similar to a BPS Layout where the characteristic combinations are 'From Transaction Data'.
Is it possible to create an input ready qurey in such a way?
Thanks in Advance,
Dezso

Hi Dezso,
Yes,
If you want the query to work like a "from transaction data" layout. Goto the extended tab on the charicteristic 0account and change the setting under "Access type for result values" to "Posted values" Then only lines with posted values will appear.
M.

****************Input ready Query**************in IP.

Hi guru's
I am bit new to IP,
I have the Fspecks now, but in that what i observed that some of the fileds are requires to be manual entry in the reports.
Based on the input upto now i under stood that need to go for input ready query.I have pasted my idea below.please go thru and found something wrong please........ alert me.
Now i need to one basic cube...i.e for actuals,.
Need to create one more cube ( Real time ) with key figures which are requires manual entry in the report.
Now i will create one multi - provide and will create aggregation level on this,...and will run the query......
in the planning i can change the required key figures into manual enty///////.
Please correct me if i am wrong ....other wise please guide me how to move forwad.
Thanks in advance ......
Subhratha mukargeee.

You are going in the right direction. basically, the endusers will be able to make references of actual data to do their planning. Having an aggregation level on top of this multiprovider will enable the users to compare actuals/plan data. Try to keep the aggregation levels as small as possible i.e only include the necessary infobjects.
After you setup the aggregation level, it acts like an infoprovider so create the input ready query using the designer. For a query to be input ready, start by including all the char and keyfigures in the row and cols respectivley.Set the property for keyfigures as data can be changed using manual entries.
Anyways, welcome to the world of IP. Best of luck.

Can we enable Info Objects as input in the Input Ready Query...

Hi Folks,
As I wanted to implement Input Ready Query for Planning in which User has to enter Charactersitc Values apart from Keyfigures.
Per Example:-
Project Number and Budget are Fields in Input ready query. Here user wanted to enter Project Number and Budget values Manually.
Is it possiable, if yes, can you give me your idea how to implement this scanario in IP by creating Aggregation level or Input ready query.
Thanks,
Venkat

Dear Snehith,
Thank you very much for your quick responce, Since Thursday and Friday are weekend holidays for me that is the reason i didn't respond your answer. Sorry for the my delay responce.
In my business case is here only one time selection only not for every row selection.
Before post this i was created One Planning Cube>on top of this i created 4 Aggregations Levels>created Planning Filter with respective aggregation Levels > Created 4 Input Ready Queries with respective 4 aggregation levels>Created one web template>used Tab Strip Container Web item and assign 4 Input ready queries to 4 data providers>Created Variables for Exe Department in Inputready queiry and assigined to Data Providers in WAD.
Now my Web template is asking user input and giving Exe Department values and then entering to out put where user can able to give values and save plan values. But Exe Department characterstic is also displying in Coloum area which should not be displyed in my case. becase of whater characterstics assigned to Dropdown they should not appereard in Coloum area.
How can i do this.? Can you provide your views...
I hope you clear what i am mean here..

Input ready query input help problem (F4 help)

Dear All,
We are using NW2004s with SP9.
We have created an aggregation level with 0MAT_SALES, 0SALESORG, 0DISTR_CHAN (0SALESORG and 0DISTR_CHAN are compound characteristics of 0MAT_SALES) characteristics (and other char. as well). We have a Filter where we added the above mentioned characteristics and a navigational attribute of 0MAT_SALES (0MAT_SALES_NAV_ATT)
We set the follwing filter values:
0SALESORG = AT01
0DISTR_CHAN = 01
0MAT_SALES_NAV_ATT = P
0MAT_SALES = nothing but we set the 'Can be changed at execution' flag in the modeler.
We have an input ready query on the above mentioned aggregation level. We are using 0MAT_SALES as free characteristic and we set 'Only posted values' on the extended tab.
Our 1. problem is that when we want to enter new rows into the Query and get input help (F4 on the input ready cell) to select 0MAT_SALES we get all 0MAT_SALES values and not only that ones which has 0SALESORG and 0DISTR_CHAN values set in the filter.
Our 2. problem is that 0MAT_SALES_NAV_ATT = P is not taken into consideration during query execution and we also get all materials.
Any help?
Thanks in Advance,
Dezso

Dezso,
We looked into using Navigational Attributes in SP7 and found that Input Queries were unable to process them. Unless there has been some specific enhancements I do not believe that anything has changed here.
I recommend raising an OSS and getting clarification from Waldorf. The SAP Help page on input queries in IP also provides some clarification in this respect.
Hope this helps.

Read only rows in input-ready query ?

Similar Messages

Maybe you are looking for