Recently did upgrade from OS 10.6.8 and to Mainstage 2.2.2 and have lost lights on my Gio pedal only in Mainstage - still have them with Logic. Tried holding button and replugging USB cable, but did not fix it.
Recently did upgrade from OS 10.6.8 and to Mainstage 2.2.2 and have lost lights on my Gio pedal only in Mainstage - still have them with Logic. Tried holding button and replugging USB cable, but did not fix it.
Hi
Chamie7 wrote:
Recently did upgrade from OS 10.6.8 and to Mainstage 2.2.2 and have lost lights on my Gio pedal only in Mainstage - still have them with Logic.
I presume that you mean that the switches do not light up as appropriate when you select a Patch in MS?
If so, in Layout Mode, select each of the buttons in turn, and check that they are a) Assigned to the correct MIDI CC number etc, and b) that "Send Value to" has the correct Port selected.
CCT
Similar Messages
-
The USB cord needed to transfer photos from my iPhone 5 to Windows XP has nothing to do with the charging cord which appears to have an USB 'end', but apparantly is not, as it will not fit into any USB port on my PC?
An iPhone 5 comes with a single cable. It is a USB to Lightning connector cable that is used for charging, for syncing, and for transferring photos from the Camera Roll to your computer. There is no separate cable for charging.
-
White screen, not syncing with computer- tried holding buttons please help?
Please help. The screen of my daughters 4th gen ipod has frozen white. Have tried syncing the frozen ipod with computer but it is not recognised. I have treid holding home and sleep button at the same time but no change. Would be prepared to do a reset but the computer cannot recognise it. Have read various other responses to questions and am currently leaving the batteries to drain. None of this is helped by the fact that my daughter is sobbing about it in my ear! Ahhhhh
Phil, did you have a hard Saturday night? The ling you provided is for "regular" iPod, not iOS devises, You link stated:
"If you have an iPod touch, see iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows."
Philly_Phan wrote:
Have you been here?
http://support.apple.com/kb/TS1369
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again. -
Have to unplug/replug USB cable to HP3300mfp
Purchased new Intel iMAC and upgraded to 10.4.10. HP3300 mfp worked with old system,and works with new system - IF you unplug/replug USB cable each time you start up computer, wake the computer from sleep, or after not using the printer for a while even though using the computer. Tried reinstalling driver, resetting printers in Print Utility, turning printer off/on, etc. Printer shows in System Profile. At least we found how to make it work - just an aggravation. Suggestions appreciated.
I'm experiencing the same thing lately. Frustrating and unable to backup to my iDisk. Doesn't appear to be being caused by my ISP (comcast) which is surprising.
-Dennis -
iPhoto just froze so I Force Quit the iPhoto app and now I have lost half my (hundreds) of photos. How do I restore them?
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
I have a used ipad mini. I did a reset on it and I am trying to set it back up, but it is still tied to last users iTunes ID and will not let me set it up with mine. Any ideas. I tried setting it back to factory defaults with usb cable, but still no go. How do I activate ipad mini with my iTunes ID.
delete the email account and try again
-
When starting iPad get one icon of iTunes and shows USB cable but IPad doesn't launch
My son tried to upgrade our iPad to iOS7 last night and this morning when attempting to turn device on all we get is an iTune icon and picture of USB cable and nothing works. Any ideas how to fix this
You are in Recovery Mode. Follow the instructions below to recover your iPad.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost. -
I have an iMac running OS X 10.8.3 and have connected an Epson Workforce 2540 printed that is allegedly Airprint enabled. I can connect and print with a USB cable but can't connect via Airprint. My colleague running 10.7 can. Is this a feature of 10.8? Any ideas for a fix?
iOS devices use AirPrint to connect to a supported printer. OS X will use Bonjour to locate and connect to the same printer.
With the Epson connected to your wireless router, when you open Print & Scan and click the plus button to add, does the Epson appear in a small box with a heading of Nearby Printers?
If not and a window appears showing Default, Fax, IP and Windows in the toolbar, do you see the Epson with the Default view selected? -
I'm new to this and I think I typed a long heading!
Anyway the issue is I have iTunes and just updated it to the latest. I also have various Apple devices however my iPhone won't sync with iTunes. When I connect it using the USB cable it does not appear in the top right corner as does other devices. The cable is fine as it charges and also my PC sees the device. However it does not appear in iTunes so I can't sync music to it.
I've searched the web but all asume iTunes can see the device.
Help!?Hi David,
If you are having issues with your iPhone not being recognized by iTunes on your Windows machine, you may find the troubleshooting steps in the following article helpful:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
- Brenden -
I plugged in USB cable but not showing connected status in my ipod 4th generation
I plugged in USB cable but not showing connected status in my ipod 4th generation
What have you tried so far in terms of troubleshooting this issue? Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the PC?
How to reset iPod
Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock -
hi just done some up dates on my i phone three it got half way through sync with my phone then the phone turned of and came back on again with the i tune picture and the end of the usb cable. but my phone is plugged into my computer can anyone help
Try to force your phone into recovery mode. Disconnect it from the computer's USB cord. Turn it off if you can by holding the sleep/wake switch until you see the red slide to off. If you can't turn it off, please continue. Press and hold the home button while plugging it into the computer's USB cord. Continue holding the Home button while iPhone starts up. While starting up, you will see the Apple logo. When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message. http://support.apple.com/kb/HT1808
Then you can restore your phone: http://support.apple.com/kb/HT1414 -
my iphone 4 does not appear in my(windows 7) lap top, when i connect i can hear the sound of usb connected, but its not appear in the itunes or computer, and its not charging when i connected to the laptop as well, bit confusing, help please
Take a look at this link, http://support.apple.com/kb/TS1538
-
I have reset my iphone 5c and now it has the apple logo on the screen. Nothing is happening, apart from the screen going off for a few seconds, only to go back to black screen and white apple log. I have tried holding home and lock buttons for 10 seconds, but to no avail. I did a reset on settings as the IOS 8 was just slowing down my phone horrendously. How do i sort this please ?
Hi MartinH78,
If your iPhone isn't responding or won't start up past the Apple logo, you may find the troubleshooting steps outlined in the following article helpful:
iOS: Not responding or does not turn on
Regards,
- Brenden -
I am trying to restore an older iPod Touch, but do not have the passcode. I am getting an error message saying that I need to free up some space, but I cannot because I don't have the passcode and have never synced this device to my account. Help..
If it is asking for the screen-lock passcode then:
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
Otherwise follow varjak paw recommendation -
My ipod touch screen is white and i dont know how to fix it i already tried home button and lock and also restarting it but it still is white, in the backgroud i can still hear the typing eventhough its all white
Try restoring the iPod. First from backup and if problem persists, restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Nokia 6680 Camera quality (or lack of) - non focus...
hi, have just got a 6680 and whilst it seems and appears to be an all-singing-and-dancing phone, seems to have a couple of issue. 1/ using the main camera, anything past x1 magnification is blurred. Have tried cleaning lens, altering contrast etc. et
-
HT201303 How to change Apple ID security questions
I received and email saying my Apple ID security questions/answers had changed. I immediately changed my Apple ID password... and again the next day had to change it again because it would not work when trying to update apps on my Iphone. So here is
-
What type of files can I import to iMovie?
I want to know what type of files can I import to iMovie. I recorded a video from a Windows PC, I want to edit it in iMovie but it's on .wmv so I ca't import it. What type of file do I need so I can import it to iMovie Thank you
-
Hi Experts, I am trying to display a Spool number using SP01. This spool number is present in table TSP01. But when i enter that particular Spool number then it display output as 'List contains no data'. But in the bottom of output it shows '1 spool
-
Hi experts, Is it possible to display ALV report with out using field catalog ? If yes please tell me how . Thanks, Usha