Recomended solution for a notebook problem (Nascar Racing 20

On my laptop, Dell Inspiron 600m, I have the Sigma Tel AC 97 Integrated sound card. I am running windows XP professional SP2.
I have one application, Nascar Racing 2003 Season, which does not support the internal sound card. You only hear a buzzing noise from the engine. Sierra no longer supports this game, so I was wondering if anyone had ever tested any of these products with Nascar racing 2003 season to see if they would solve my problem.
PCMCIA Sound Blaster? Audigy? 2 ZS Notebook
PN: 70SB053000000
Sound Blaster Audigy 2 NX
PN: 70SB030000000
I have been unable to find any answers on these forums or using google. Thank you for your time.

Similar Messages

Buy my problem of camels Store Lee games possible solution for me my problem?

Buy my problem of camels Store Lee games possible solution for me my problem?

This worked for me, sort of. A while back when I downloaded that windows update that installed the new version of IE, I noticed that IE wouldn't connect to the internet and pages wouldn't load. However, I thought nothing of it because I use Firefox and FF was working just fine.
I went into IE earlier this evening (it still wasn't working) and tried to follow your recommended steps. I got up to step 4 and IE froze. I tried closing it, reopening it and repeating the steps but it would always freeze at step 4. In another thread, someone was saying that iTunes released a security update and that fixed the store for them so I tried opening Apple Software Update and that froze. I tried it several times, nothing. Would always freeze. I even tried updating thru iTunes and IT would freeze.
Finally, I went to the control panel and uninstalled IE7. The iTunes store and the Apple Software Update program are now working! So thank you very much for your suggestion. Otherwise, it may have never clicked with me that IE was the problem.
Windows XP

Tried the posted solution for the RETR problem and it works once then it returns. How do you make the change permanent?

Tried the posted solution for the RETR problem and it works once then it returns. Once the email dl'ds the file deleted per the instructions returns. How do you make the change permanent?

Hi DOC808HI
# I don't know what you mean by "posted RETR solution". Could you please post a link to the suggested solution? Perhaps you are referring to this thread: https://support.mozilla.org/en-US/questions/991792 ?
# Anyhow any further troubleshooting information you can provide will be great e.g. Your Operating System Version (XP, 7, Mac OS X Mavericks), your anti-virus if any, your mail provider, your ISP, what you did, what happened with exact error message, what happened
Cheers!
...Roland

Does anybody have a solution for the NAT problem?

Is somebody's application or Applet able to play any RTP stream behind a NAT Router? Can anybody establish any kind of connection / broadcasting between two subnets? I've got my RTP-Transmitter@public IP (using RTPManager...SendStream.start()), and I try to receive the stream from my local network which is behind a router (DHCP: 192.168....).
I read forums, newsgroups, looked for any solution for days all over the web but I've found nothing. Zero.
What's the secret? Any hints?
Best regards from Munich / Germany,
r.v.

Hi
I have the same problem.
I have one appletTransmitter that capture video from webcam and transmit it to other client on internet.
I try to transmit medialocator from appletTransmitter to servlet1 and then save MedialLocator as servlet attribute, then other client can connect to servlet2 that send saved MediaLocator to appletClient.
APPLETTRANSMITTER:
URL url=null;
MediaLocator media=new MediaLocator("vfw://0");
try{
url = new URL("http://localhost:8080/servlet1");
catch(MalformedURLException mue){mue.printStackTrace();}
URLConnection conn=null;
try{
conn = url.openConnection();
catch(IOException ioe){ioe.printStackTrace();}
conn.setDoOutput(true);
OutputStream os=null;
ObjectOutputStream oos=null;
InputStream in=null;
ObjectInputStream iin=null;
MediaLocator mResp=null;
String r=null;
try{
os=conn.getOutputStream();
oos=new ObjectOutputStream(os);
oos.writeObject(media);
//oos.writeObject("Prova Servlet");
oos.flush();
catch(IOException io){io.printStackTrace();}
catch(ClassNotFoundException cn){cn.printStackTrace();}
SERVLET1
ObjectInputStream objin = new ObjectInputStream(request.getInputStream());
MediaLocator ml =null;
try{
ml = (MediaLocator) objin.readObject();
context.setAttribute("media",ml);
catch(ClassNotFoundException e)
{e.printStackTrace()}
But on servlet1 there is a ClassNotFoundException: MediaLocator
What do we think about the solution and exception problem?
Best Regards,
Nico from Italy

Cisco Solution for FXO Disconnect Problem

I have Panasonic PBX-->FXO-->1751V------WAN-----1751V-->FXO--Panasonic PBX. I am facing a serious problem with FXO on both ends becoming busy after some few initial calls.
What is the exact Cisco solution for this FXO disconnect problem? I have read and applied some Netpro tips for similar case but none could help.
Can we have Cisco expert explain this??

Hello, I think this url may be helpful:
http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800ae2d1.shtml
Regards.

A solution for iTunes install problems

I upgraded to the latest ver of iTunes and immediately had ALL the problems posted all over the 'net.
The following is what worked for me.
BACKUP!!! Set a Restore Point. Back up your REGISTRY. It is critical that you back it up beforehand and use caution while cleaning it. Please do this in case everything goes T. U.
Remove all references to iTunes, iPod and Quick Time. There are literally thousands and you must get rid of all of them.
Find, download, install a copy of jv16 Power Tools.
Then:
1. BACKUP! Set Restore Point! Back up your Registry! Did I mention backing up?
1a. Be very careful cleaning out the Registry. Take your time. Go slowly. Make sure that what you delete is only iTunes-related. Check twice before deleting. Take. Your. Time.
1b. The Registry is your PCs mind; do not scramble it. You will be sad.
2. Using jv16s Software Manager, uninstall iTunes, iPod and Quick Time.
3. Using jv16s Registry Finder, one at a time, search for and delete ALL references to iPod, iTunes, Quick Time and Apple Computer (BE CAREFUL; it will give you references to various 'applets" and "appletalk"; do NOT delete those. Only Apple Computer stuff.)
4. Using Microsofts Search function, search for all remaining references to iTunes, iPod, Apple Computer (leave applets alone) and most importantly-Quick Time.
5. When you are certain that everything that says Apple Computer, Apple, iPod, iTunes and Quick Time exists no more on your PC, Reboot.
6. Go to www.old-software.com and download an old copy of iTunes. The one that finally worked for me was iTunes v 6.0.5
7. Install an old version of iTunes. DO NOT USE THE LATEST VERSION OF iTUNES! Thats what caused the problems in the first place.
8. Reboot.
Even though you previously "uninstalled" iTunes, probably using the Add Remove Programs application in Control Panel, there remains behind thousands of pieces, parts and references to iTunes and Quick Time, in the Registry, TEMP files, Documents and Settings (Application Data and Local Settings), in Windows/system32 and a hundred other places. You gotta get rid of it all.
Quick Time seems to be the main culprit, but in the end I had to get rid of all traces of all of the Apple applications before I could install again and get it to work.
It took me 3 days to figure out this procedure but once I did, it took only an hour to do it.
I've seen a couple other procedures recently posted here that look good. If you are uncomfortable with going into the Registry, try one of those others first.
And fer cryin' out loud, Apple. Yank the latest version of iTunes off your site. I did a Google search for "iTunes installation problems" and came up with 700,000 hits. Do ya think you might have a problem?
Windows XP Try testing your upgrades before releasing them!

Im trying your method right now, when im finished ill let you know how it worked out. I agree with your comment on apple needing to pull the latest version and get a version that actually works.

Temp solution for e-SATA problems...

Had a talk with CalDigit about this and they say it should work. It's a solution for now until Apple and Sonnet and CalDigit gets their stuff together.
Here it is:
Use an eSATA Extender. Cost like 30 bucks.
Here's a link where you can buy the thing:
http://www.caldigit.com/store.asp#Accessories
*This is only for MacPros

Ignore this last post! I just tried this out and it doesn't work for RAIDs just yet. It might for you but not for me!
Sorry for the mis-communication!

CORRECT SOLUTION FOR THE APPSTORE PROBLEM

CORRECT SOLUTION (by AppleTeam)
1- Uninstall the old version of itunes you have (or just uninstall iTunes if you are already running 10.4.0.80
2- Uninstall Quicktime also
3- Uninstall Apple software update
4- Uninstall Apple mobile device support
5- Uninstall Bonjour
6- Uninstall Apple application support
(I would shutdown wait 20 seconds then fire up the computer at this point and then come back and install itunes)
7- Reinstall iTunes 10.4.0.80
Apple Tech said you HAVE to uninstall in this order. After I did this, the App Store started working correctly.

Thanks for the recommendation of the pad. I guess it
will deplete the battery life quicker.
I am wonder, the heat problem, is it a APPLE's fault?
No, as Guitaristguy313 stated, the heat problem exist in most (or all?) Core Duo laptops, whether they are Apple branded or Sony branded or Dell branded. The MacBook is not running warmer than another Core Duo based laptop.
So it's apparently the normal operating temperature of Core Duo laptops.
That's not too surprising considering that Intel document its Core Duo to be in normal operating temperature if the cores of the CPU don't run higher than 100°C, and 100°C is a very high temperature.
Hopefully MacBooks Core Duo's cores generally don't run higher than 85°C, but while within specs according to Intel, it's still very high so it's not surprising that the notebook shell temperature is high also (according to a test on a website, the shell can reach 50°C when the Macbook is used intensively).
So if you really want to have a culprit for the high temperature of the Macbook (and in fact also other Core Duo notebooks), it would be Intel.

Practical solution for the Heat problem?

Dear fellow Mac users,
I got my MacBook last friday. Yes, it's very Hot (temperature). I realised that you guys must be facing the same problem. I love this computer. But the heat is too much, i can't put it on my lap to work, when i travel...
Even typing on the keyboard for a long time in the library, i feel the heat coming out from the keyboard! so fustrating..
Are they any practical solution on how to reduce the heat? I dont want to dismantle the machine.
Thank you very much!
moses

Thanks for the recommendation of the pad. I guess it
will deplete the battery life quicker.
I am wonder, the heat problem, is it a APPLE's fault?
No, as Guitaristguy313 stated, the heat problem exist in most (or all?) Core Duo laptops, whether they are Apple branded or Sony branded or Dell branded. The MacBook is not running warmer than another Core Duo based laptop.
So it's apparently the normal operating temperature of Core Duo laptops.
That's not too surprising considering that Intel document its Core Duo to be in normal operating temperature if the cores of the CPU don't run higher than 100°C, and 100°C is a very high temperature.
Hopefully MacBooks Core Duo's cores generally don't run higher than 85°C, but while within specs according to Intel, it's still very high so it's not surprising that the notebook shell temperature is high also (according to a test on a website, the shell can reach 50°C when the Macbook is used intensively).
So if you really want to have a culprit for the high temperature of the Macbook (and in fact also other Core Duo notebooks), it would be Intel.

Solution for Help files problem

Hi everyone,
A solution is now available for the problem that some people experience with the Help files not opening from Photoshop Elements 6, Premiere Elements 4, and Audition 3.
Please read Tech Note kb402707:
http://www.adobe.com/go/kb402707
Download and install the new DLL file provided in that Tech Note.
-=Tim K.
Tier 3 Product Support Engineer | Adobe Systems

I almost tossed the program ( CD version ) after two days of not being able to open it while troubleshooting it. Only a blue Windows reporting window would open saying there was a problem with the Editor. I made a test user account and when I opened the program the on-line registration window opened. After registering it on-line I could open it in both the new test user account and my own account. The program never did ask to register during any installs on my own admin account. Seems OK now, hope this helps

Need solution for auto-fit problems

I've got a form with 7 text boxes that I'm looking to get copy to auto-fit properly. I'd also like to flow the content without having to start from scratch with a new form.
Here are my problems:
- "Expand to fit" is grayed out for both the height and width on every text box.
- "Allow page breaks within content" and "Keep with next" are also grayed out on every text box.
- I also have "make fixed-size text object auto-fit while editing" checked to perform in my options and it's not doing that at all.
HELP!!!! Thanks.
Gabriel Daigle

Tried this. Didn't work. All those items mentioned previously, as well as anything having to do with subforms, are grayed out. Even tried a new document with flowable layout, added text boxes, and everything is still grayed out. Any other solutions out there?

Solution for terminal input problem

(my english is bad, sorry)
Hi, this thread is for programmers who like console applications (ncurses based).
As you all know, terminal emulators have a big problem with user input. Their input system is good for CLI, but really sucks when using full screen applications like vim, emacs, mc, ncmpc, htop, rtorrent, irssi (I mean all ncurses based or slang based which use cursor movement). Examples of this problem:
- Ctrl-L and Ctrl-Shift-L generate the same single byte in the terminal; namely 0x0c. They are indistinct.
- Ctrl-I and Tab generate the same single byte in the terminal; namely 0x09. They are indistinct.
- UTF-8, Alt+letter, Esc-letter all generate the same bytes in the terminal. E.g. é vs. Alt+C Alt+) vs. Esc C Esc )
But there is no simple and nice solution. Problems cannot be solved without fixing the terminal itself and without breaking some backward compatibility. But I think a lot of console-addicted programmers want to solve them.
So, here is my way of solving this problem.
http://nsf.110mb.com/termbox/termbox-concept.html
The main idea is to add a new terminal mode called "RAW input". This mode will send special events almost directly from X11 to console application.
On this page I introduced a simple demo application and an rxvt-unicode-9.02 patch.
In this version of my hack, echoing in terminal is broken. You can't enable echo with this new mode yet. But I can solve this too.
It is simple and needs a little bit more hacking of terminal. Terminal should start all input messages with unique escape sequence and when it receives echo of these messages, it should ignore them. But also terminal should send these input messages *with* usual symbols, so they can be echoed.
So I want to know what do you think about all this.

shining wrote:
nsf wrote:So I want to know what do you think about all this.
I think that you might want to find a more specialized place to get more valuable feedbacks. But also that I never noticed these input problems so it has never bothered me
Yes, I think I should try usenet news groups
These input problems are not so big deal, but when you want to use your keyboard at maximum, they kick your ass
I discovered this problem when I was working on ncurses minimalistic replacement. But in the net there are talks about this too.
Here for example: http://www.nabble.com/Improve-vim%27s-k … 34943.html
Last edited by nsf (2008-06-16 07:06:37)

IPod Touch stopped working after i upgraded it from iOS4.3.3 to iOS6. Now even if i restart my iPod it shows a iTunes symbol followed by a upward arrow mark and a USB symbol. I cannot find any solution for this particular problem in Help section.

I tried to upgrade my iPod from iOS 4.3.3 to iOS 6 through iTunes. As soon as it completed the download of the 840 MB file, it said that my iPod is being restored. But after a considerable amount of time it said my iPod could not be restored and stopped. Now my iPod screen is just displaying a iTunes symbol followed by an upward arrow mark and then a USB symbol.
iTunes has stopped to detect my iPod anymore. I tried to update iTunes 10.7 as requested in the website support page. But if I check for updates in iTunes it is detecting the available updates but not updating it when i click on the update button.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Solution for those having problems with Snow Leopard and drivers

I have posted what worked for me in several posts that other people had started, but because I feel I might sound repetitive and annoying, I am just posting it in this one for everyone. I hope it can be helpful. Best wishes for the year 2010
First of all, make sure you have made a SOFTWARE UPDATE before doing the following:
* Make sure your printer is connected and "on"/green light via your USB port (or other which will be recognised by your system)
* Go to System Preference
* Print & Fax
* Your printer will appear.
* Right click on the printer that is giving problems
* Reset printing system
* All printers will disappear
* Click on the + sign under this/these to add a new printer (I suppose you would have to do so for each one you have if you have more than one... not sure)
* In my case, the one that appear was 950c even though the one I have is 959. So, to make sure I would have something, I kept that, but then I click the + sign again.
* I selected the 950C, but then I checked on "PRINT USING".... THEN
* I had to "SELECT PRINTER SOFTWARE"
* I found it and that came where it said "Print using", but this time it was the right software.
* I renamed the NAME of the printer to be sure I would recognise it... LOL
I hope this is useful for all of you.

If a device is an All-in-One and can therefore scan, you will find that when the printer is added, the pane on the right hand side for that device will have two headings - Print and Scan.
If the device is just a scanner, then there will be heading of Scanners in the list on the left side. Printers will typically be listed at the top of this list.
Regarding click the + (Add), if you see Protocol, etc, then you have selected the IP icon at the top of the Add Printer browser. This is for networked devices using TCP/IP. To see devices connected to your Mac via USB, then you need to select the Default icon while in the Add Printer browser.
Note that if you don't see any icons in the Add Printer toolbar, then you have it hidden. To see the icons, click the oval shaped button on the right hand side of the Add Printer pane.

Possible solution for people having problems updating InDesign CC to 9.2.2 on Windows 7/8

So after InDesign CC x64 (x32 version seemed fine?) giving me constant update failed errors and about four different error codes each different way I tried to fix it, I decided to find out why, like many I have been getting this in my Install log.
FATAL: Payload 'Adobe InDesign CC x64 Application Language Files_9.2.1.101_AdobeInDesign9AppLang64-en_US 8.0.0.15 {35937D37-6FF2-1014-BDC2-9CD1656E73E4}' information not found in Media_db.
Reinstalling via Control Panel or the CC Cleaner tool did nothing to remedy the situation and the same error kept occurring, even though CC is meant to download the language files (apparently)
However, what I thought was odd was the fact that it references 9.2.1 not 9.2.2. It seems Adobe CC installs InDesign CC 9.2.1 from a fresh install but then fails on the 9.2.2 patch, but it seems 9.2.1 itself is either corrupted or something doesn't go right with the language packs as the error above shows.
SOLUTION: Manually install both the 9.2.1 and 9.2.2 patches.
Get them from here: http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
Both will be named setup.zip, so rename them to something like setup_9.2.1 and setup_9.2.2 and extract both zip archives.
Install the 9.2.1 patch followed by the 9.2.2 patch, reboot and Creative Cloud should stop whining. It worked for me on Windows 8.1, open up InDesign > Help > About InDesign and check the version, it should be 9.2.2.
PROFIT.
Hope this works for others. Hopefully Adobe fix this in a CC app update, as this had me going in circles for a while.

Hello,
This solution worked for me.
I was encountering the Error Code — U44M1P34.
This error occurred when Creative Cloud Manager notified me of the InDesign CC 9.2.2 update.
I tried almost everything, removing / uninstalling the program, removing / uninstalling all the programs, deleting all the left behind folders of the programs, re-downloading them from Creative Cloud Manager and even trying manually to install the 9.2.2 update.
Thank you.
Andreas

Recomended solution for a notebook problem (Nascar Racing 20

Similar Messages

Maybe you are looking for