Recording Video with iPhone 4S and Final Cut Express

Hello,
I make drum covers using Pro Tools for audio recording, and FCE for video editing. I have 2 sony handy cams for different angles/views, and recently purchased an iPhone 4S. I typically import the videos into FCE and cut out the camera's audio and import Pro Tools audio. I figured I could use another angle with the iPhone. When I imported all 3 clips (sony, sony, iphone) into FCE, the iphone clip plays in FCE, but has an orange line in the timeline section, and plays really choppy. I tried rendering the video for real-time editing, and that didn't seem to work. The biggest issue, is that the video from the iPhone will not sync correctly with the music, but my other cameras do just fine.
Any help would be greatly appreciated!
-Justin

In MPEG Streamclip, you must make the proper audio settings as well as video settings. Normally, FCE Sequences require uncompressed AIFF (PCM) audio at 48khz, 16 bit. Which audio settings did you use?
This tutorial on using MPEG Streamclip may help: http://www.secondchairvideo.com/?p=739 Although it is written for converting DVD footage, the basics are the same.
-DH

Similar Messages

Sony DCR-TRV140 with Macbook Pro and Final Cut Express 4

OK all, I'm a Mac novice here. Just bought my first Mac last month and added Final Cut Express to it in order to have some nice advanced features when it comes time to edit all kinds of home video shot on the Sony DCR-TRV140 Digital8 Handycam...
But I'm having trouble figuring out how to get my MacBook Pro to recognize the camcorder.
I have a 4-pin firewire connector on the camcorder, and a 9 pin firewire connector on the Mac. Is it as easy as buying a 4/9 pin cable?
I thought about trying to hook it up through the USB cable... but haven't had any luck there either.
As you can tell, I'm quite new to this, so please be nice. Ha!
If I can provide any further information, please let me know.
Specifications for the Sony camcorder can be found here:
http://www.sonystyle.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=1055 1&storeId=10151&langId=-1&productId=11027762
or here
http://www.amazon.com/Sony-DCRTRV140-Digital8-Camcorder-Streaming/dp/B0000634T4/ ref=cmcr_pr_producttop
Thanks!!

Is it as easy as buying a 4/9 pin cable?
Pretty much.
Hello and welcome to the forum.
Here's one source of such a cable:
http://www.cablestogo.com/product.asp?cat_id=606&sku=50708
I'm not sure what Easy Setup you'll need to use in FCE, but, if you're in the USA, I think it will be DV-NTSC DV Converter or maybe DV-NTSC Firewire Basic.

Is there a problem with USB speakers and Final Cut Express HD?

I have audio only through my internal speaker for Final Cut - however all other sounds play through my USB Harman Kardon speakers fine.
I have tried sending the audio out to my M-Audio head too - and that has been fruitless.
I am really frustrated - I reinstalled the OS. And ran it with only Final Cut and the OS and still have the same issues. Even if I drag an MP3 into Final Cut it plays through the internal speaker. I also notice that the audio really lags behind the video when it plays through the internal speaker - if that means anything. I have made sure that the Canvas Setting is correct.
Tech support for the most part has been nice, but they are unable to help me.
Please help!!!! And thanks in advance.

Sorry, no actual experience with USB Audio devices.
I found this in the Pro forum, but the outlook doesn't seem good:
http://discussions.apple.com/thread.jspa?messageID=1739084&#1739084

Anybody use Canon ZR950 with Mac Laptop and Final Cut Express

I just bought a Canon ZR950 Mini-DV camera and have been eyeing up a new MacBook Pro for editing video of my new baby (12 days to go). I'm wondering if anybody has had success with that model camera and FCE. Would I movie do the trick or is FCE that much better?
Also - would the 256mb video card model w/ the 15" display be okay?
Any suggestions or recommendations would be greatly appreciated.
Thanks for your time!!!!

I have my old Mac listed as my current computer (I use it to record music as it does exactly what I need). I've been looking at the new MacBook pro - wouldn't that work?
If not - which new Mac should I buy?
Message was edited by: 2008stilllearning
Message was edited by: 2008stilllearning

How do you record video with usb mic and have the audio from garageband be the sound when recording and not just your normal voice but garage band effects for youtube?

How do you record video with usb mic and have the audio form garageband be apart of the video when recording, meaning the audio from garageband and echo and not just your normal voice for youtube post?its not add the garageband audio its just normal voice from mic no effects is going thru?

Hi Life93,
What you describe would be possible by recording your video, then removing the audio from it and adding audio from GarageBand once the video is in iMovie (I presume here that you are using iMovie for your video production. Other applications may need different methods.)
See this thread on how to remove the audio from a clip in iMovie -
Is there a way to separate audio from a video c...
https://discussions.apple.com/thread/1779767
To add audio from GarageBand use this article -
iMovie '11: Add a sound clip to your project
http://support.apple.com/kb/PH2255
Thanks for using Apple Support Communities.
Best,
Brett L

Iphone footage into Final Cut Express

I left a question earlier in this forum and would like to update (hopefully that's proper process!). I'll repeat the question, in case:
I'm trying to get footage from iPhone 4 to Final Cut Express. I'm using MPEG Streamclip 1.9.2. In the tutorial I found, they did an export to Quicktime, selecting the Apple Intermediate Codec as the compression, 29.97 as the Frame, and "1280 x 720 (unscaled)" as the frame size option (I'm also selecting frame blending and better downscaling, and turning off interlaced scaling; the rest are Streamclip defaults). My version of Streamclip doesn't have a 1280x720 (unscaled), so I've been forced to select 1280x720 (HDTV 720P). Not sure if this is my problem.
On recent attempts, I've managed to get the clip into a QuickTime format (using the settings above) in a way that doesn't look stretched (can't tell whether it is or not). When I import the clip into FCE, it comes in without having to be rendered, and looks as if it's not stretched there either. But as soon as I drop the clip into the sequence and try to play it, I get the "Dropped Frames" warning. I'm already operating in RT Safe mode, and rarely/never have problems w/ dropped frames with clips that were captured from my Sony camera/tape. Is the AIC codec more demanding of faster drives? (I'm using a 200Gig external Apple drive at the moment). Or is it because I have been forced to export as a 1280x720 HDTV 720p as opposed to unscaled?
In FCE I've set easy set up to:
Apple Intermediate Codec, 29.97, and HDV AIC 720 p30; Is this a match with the Export QT version?
And if so, would the clip be coming into my sequence without having to be rendered? Since I haven't had to upgrade my hardware for my other camera, I'd be reluctant to go out and buy more external disk power, in the event it doesn't do me any good.
I know there are several posts on people trying to get iphone footage into FCE already, but they don't seem to apply and, after hours on the internet looking for a solution, I'm at my wits end. PLEASE HELP
Thanks in advance!!

The 4s records video as MPEG4/AVC (H.264)/1080p/30fps in a .mov filetype. Final Cut Express is NOT designed to edit this kind of video. You need to convert the 4s video clips to QuickTime/Apple Intermediate Codec/1080i before importing them into FCE. You can use MPEG Streamclip to do the conversion. In FCE you also need to select a matching Easy Setup (should be AVCHD Apple Intermediate Codec 1920x1080i60 for converted 4s clips) and create a new Sequence to edit your video. This should eliminate the constant re-rendering problem.
ps. Final Cut Express was discontinued in 2011 even before OS X Lion was released. It is no longer supported by Apple and there is no guarantee it will run properly on Yosemite. Just so you know. Final Cut Pro X is the currently supported app.

Best Settings using the new Canon HV30 and Final Cut Express HD v3.5.1?

My wife presents programs at schools and uses digital movies that we make and edit as one of her media materials. We want to present higher quality videos that look more film-like. I am hoping that the combination I described above will enable this improvement. In the past we used a Canon ZR20 and iMovie HD and put these on DVD's that were then played on a MacBook Pro with with QuickTime or iDVD hooked up to an Epson PowerLite projector.
I am now the proud owner of a new Canon HV30 and Final Cut Express HD3.5.1 (had FCE for a while so know how to use it). From my research, though, it looks like FCE will not be able to handle CINE MODE recording in combination with 24fps progressive frame rate [HDV(PF24)] which would allow the enhanced effect of the Cinema Mode. I can't justify the cost of Final Cut Studio 2 so I am hoping that the new [HDV(PF30)] will allow me to more easily edit in FCE.
Does anyone know if this is true and if so can please tell me the settings that I need both on the camera and in FCE to get the best quality movie that can played directly from my MacPro using QuickTime or iDVD or from a DVD in the MacPro using the iDVD player. I won't have the opportunity to always play the videos directly from the camera to an HDTV because of the school setting and the need to use a projector.
I know this is a lot to ask for, but I am sure that it will come up again and again as more people purchase this new camera. Thanks for your time.
Sincerely,
Lou Hosta

Without totally repeating myself with my post to MaccyLeopard, I haven't shot any footage yet. After doing a lot of reading I think I confused myself more than helped myself as far as settings go. So if you remember from my initial post I am asking for advice and guidance primarily on camera settings with the HV30 that will be used in a classroom (artroom) setting and then edited using FCE HD v3.5.1. I wish I was the type of person that could jump right into using a new piece of equipment but I like to get the advice of others beforehand. That way I'm not always questioning myself as to 'whether or not is this the best I can get'. I also am wondering if the 30fps frame mode would be the best to use in the classroom setting? From my reading, this mode should allow more light onto the tape allowing me to shoot in conditions with lower light levels that are typically found inside? Finally, is FCE HD able to edit this new 30 fps frame mode of the HD30? I've heard that FCE HD can't handle the 20 fps frame mode.
Thanks for taking the time to help me out.
Sincerely,
Lou Hosta

User Contributed Tips in Final Cut Express and Final Cut Express HD Forum

*The following User Contributed Tips are located in the Pro Applications: Video > Final Cut Express and Final Cut Express HD Forum:*
skalicki` - Working with AVCHD: Log and Transfer FAQs
http://discussions.apple.com/thread.jspa?threadID=2672530
Publish date: December 03, 2010
skalicki` - Final Cut Express: Basic Troubleshooting
http://discussions.apple.com/thread.jspa?threadID=2662419
Publish date: November 26, 2010
*The following related tips are located in other areas of Apple Discussions:*
Please see the User Tips Library

I'm relatively new to FCE myself, so I'll answer with what I know. I'm sure the more experienced folks will either add to or correct what I say.
1) For the Inconvenient Truth thing, I believe this would best be done in LiveType, which does allow you to do animations, and to work on individual letters and characters. Whether or not it could exactly reproduce the effects in the clip, I'm not certain, but I'm sure it could come very close.
2) For the Crowd or the Cross effects, there are two things going on at once: effects on the text, and effects on the video. My gut feeling is that both FCE and LiveType can do these, with lots of work and patience, but I'll defer to other people to answer.
3) The page peel is a transition built into FCE.

Adobe CS4/5 and Final Cut Express On a MacBook Air?

Hey all
Im planning to get a MacBook for my GCSE's, and im leaning towards the air.
I will be running applications such as Adobe Photoshop CS5, After Effects CS5, Lightroom CS5, and Final Cut Express regularly, so would a 13" 1.86ghz MBA C2D Processor with 4gb of RAM be able to run these apps fast and efficiently with no lag? Or should I opt for the baseline MBP 13"? Im also looking for portability, as im going to be taking it into school
Thanks

After effects!? Yikes... that is a beast of a program! Depends how in depth you plan on using it. Are you going to be doing 3D animations with several camera layers? If so, I don't think a MBP is going to work too smoothly. If you are doing basic to moderate use of AE functions then I think it would work fine.
Just a heads up before buying, check out the apple refurb store. They have a bunch of MBP with different specs for a very reasonable price. I got my 17" MBP from there and it works awesome with the same warranty as new... for like $500 off!

Final Cut Pro 4.5 and Final Cut Express 3.0 - 5 minute captures then freeze

Something I have found with Final Cut Pro 4.5 and Final Cut Express 3.0.
After Updating to Tiger - 10.4.11 and Quicktime 7.4.1 - Both Pro 4.5 and Express 3.0 will not capture more then 5 minutes and 12 seconds. If you are having this issue the solution I used to fix both Pro and Express issues was an update on the software. Final Cut Pro 5 fixed the problem (or 6 if you can) and with Final Cut Express, version 3.5 fixed the issue but if you can go with FCX 4.
Let me know if this helped or if you have found a different solution. Downgrading the os might help but that is too much of a pain and it's time to upgrade the software anyway.

#29: Need AGP Graphics card
Shane's Stock Answer #29 – Error: “Need AGP Graphics card”
http://docs.info.apple.com/article.html?artnum=302667
The Final Cut software is looking for a graphics card type that is required for that version of the software. FCP 4 and FCP 4.5 were released when AGP cards were the requirement. Attempting to open this on a Mac with a PCIe graphics card, such as an Intel Mac, will cause this error. FCP 4.5 is not supported on the Intel Macs. If you happen to have a PowerPC Quad processor Mac and get this error, you can try this hack:
http://www.xlr8yourmac.com/feedback/finalcut_pro_on_oldmacs.html
You can also press the "esc" key as you launch FCP. This enables FCP to open and run, but know that it might not work optimally.
If that doesn’t work, or if you have an Intel Mac, you are going to have to upgrade to a supported version of FCP…and FCP 6, part of Final Cut Studio 2, is the latest version.
Shane

Upgraded to Mac OS X Snow Leopard and final cut express 4 will not work

upgraded to Mac OS X Snow Leopard and final cut express 4 will not launch but my final cut express HD 3.0 version comes up. I reinstall my final cut express 4 upgrade disc and it still will not launch.
Where do I go from here?

You installed from the discs, right?
What happens when you try to launch? What are you doing to launch and what happens you do it? Can't see you computer from here. If you probably need to contact Apple with an installation issue on a new computer.

Final Cut Pro Studio 5.1.1 and Final Cut Express HD 3.5

Hi,
I have a client with both of these installed on the same machine (running 10.4.6).
When they try and launch either application, the splash screen comes up, loading various filters, etc. then they get an error message:
"File Error: A file of this name already exists" "OK"
Clicking "OK" closes the app.
Any idea:
1. What the file in question is?
2. Can it be deleted to let the app run?
3. Can Final Cut Pro Studio 5.1.1 and Final Cut Express HD 3.5 be used on the same machine?
I'll post this on the Final Cut Express HD 3.5 thread too (but with the order reversed).

What you did was not enough to delete the preferences properly.
This article tells you how. It is for FCE2 but works the same for FCE3 so I assume it is also OK for FCE 3.5:-
http://docs.info.apple.com/article.html?artnum=93690
It's simple to do so try it before reinstalling etc. - You should completely uninstall before reinstalling:-
http://docs.info.apple.com/article.html?artnum=301182
Ian.

Panasonic SDR-H80 and Final Cut Express

Does anyone know whether the new Panasonic Camcorder Type SDR-H80 is compatible with an iMac running under the Leopard OS and Final Cut Express version 4.0.1?

Hey ,.. I just purchased the same videocam and I am having the same dilema? Did you figure something out on how to make itr work yet?

Intel 2.0GhZ iMac with 3G RAM and Final Cut Pro

Hello all -
I've read a lot about Final Cut Studio/Pro etc either running or not running on the Intel iMac. I'm pretty confused. So I'm going to try this:
With the above machine, will I be able to run FCP and do some low-end MiniDV editing in non-broadcast quality format?
Essentially, we are using three Panasonic dvx100s to record our band this weeekend, with an audio coming from the soundboard. We want to import about 30 minutes of coverage from these 4 sources, and produce a Youtube-quality video of maybe 6 minutes in length max.
Am I going to find myself in the drink without a paddle, or will FCP work? What version would I need? I already have Final Cut Express 2.0.1 - but have never installed it - would this by chance work as a backup?
Please advise -
Thanks!
KB
www.onehandfree.com

I'm not sure why you're confused. Reading posts you'll learn that FCP will run on an iMac but that isn't the problem, the abject lack of any sort of expansion beyond a single firewire bus is the iMac's largest downfall.
Video processing is hard, no matter what format it is so the rationale of using an iMac only for dv25 editing is essentially an argument against doing something properly.
Of course you can use your iMac but your biggest problem will be cabling up your external media harddrive(s) and your dv25 feeder device, whether it's a vtr or one of your DVX100 cameras. Lotsa folks have no problems with daisy-chained devices, lotsa folks do. Just beware the limitations and I would strongly urge you to do complete system test from front to back regarding acquistion, edit and output.
Good luck.

How do I add a title to a video clip w/ LiveType 2 and Final Cut Express 4

I have Final Cut Express 4 & LiveType 2.1.4, I'm not sure how to add titles or test to a video clip, and the tutorials for Final Cut Express 4 don't say how to get started in LiveType. How do I simply add text? The tutorials say how to add effects to the text they just don't say how to add it to the clip or how to get the clip into LiveType.

Well, you don't actually _add text_ to a video clip, you _create a text clip_ and add that clip to your timeline, either adjacent to an existing clip or on the next higher track if you want to layer the text with an existing video clip.
The very simplest way to add text is to use one of the *text generators* built into FCE. Lower Third, Text, Scrolling Text, etc. allow you to create various text clips and give you basic controls over fonts, positioning, size, color, etc. You can find the text generators in the Effects tab in the FCE Browser.
LiveType is a separate and more sophisticated application that enables you to do all sorts of things with text (much more than can be done with the FCE text generators). The basic process is - create your title in a LiveType project. Save the LiveType project. Then in FCE, import the LiveType project; from there, you can treat it just the same as any other clip.

Recording Video with iPhone 4S and Final Cut Express

Similar Messages

Maybe you are looking for