RedHat 9 and Neo2

Has anyone installed Redhat 9 with this motherboard(Neo2 LS 865PE)?
I have tried to install but installation gets stuck at hardware checking.
My harddrive, graphics card are compatible. Checked on redhat website. I cannot find any info on motherboard.
So, if anyone knows, pls reply.
Thnk you.

I'm using Debian (woody) as well and it all works fine. Just had to get to somewhere above 2.4.18 kernel to enable speedy USB2.0 access (480mbits/s vs 12mbits/s). I've opted for the 2.4.24 backported kernel (http://www.backports.org) to get past the recent exploit and get the latest drivers in. You also have to use a kernel > 2.4.18 to enable SMP, since it seems 2.4.18 doesn't recognise the chipset or something. 2.4.24 shows all the details (and names) of the various chips and bridges on the motherboard. Good luck.
Have the same non-powering down problem, which is caused by APM not being SMP safe or something, but according to some articles I've read just now, you can either add to lilo.conf:
append="apm=power-off"
or
insmod apm power_off=1
on a running system. Haven't tried it at yet, but I have faith in the linux community.

Similar Messages

FX-55 and NEO2-FIR and poor performance

I just upgraded froma NEO-FIS2R using a Athlon 64 3200+ to a NEO2-FIR and a FX-55.
I got it all working - only after finding out that the Promise controller isn't compatiible with the old Promise controller on the NEO2-FIR.
First thing I did was do some benching - I spent over $1000 for the FX-55 and NEO2-FIR and was hoping to see some significant performance improvement.
Unfortuneately I don't see it. I've loaded the Performance options in the BIOS, made sure that DRAM settings were SPD (I have Mushkin Black LevelII DDR3500 matched dimms - supposed to do 2-2-2-5)
Any advice at all? I'm getting less than 5000 in 3DMark05 - and other like systems are over 6000.
If I go too agressive on memory timing the system is really unstable.
Are there known issues with the FX-55 and the NEO2-FIR? Are there any rec'ds?
Thanks.
K8T NEO2-FIR - 3.2 AMI BIOS
AMD Athlon FX-55 (2600 - no overclocking at all)
2X Mushkin 512MB PC3500 CL2 - Black Hi Perf Level II
ThermalRight XP-120 with Thermaltake A2018 (38.6~93.7CFM - 17dBA~46.5dBA)
PC Power and Cooling Turbo Cool 510w Deluxe
+5V @ 40A (1%)
+12V @ 34A, 38A pk (1%)
+3.3V @ 30A (1%)
-5V @ 0.3A (5%)
-12V @ 2A (5%)
Ripple: 1%
power
ATI RADEON X800 XT Platinum Edition
Creative Labs: Sound Blaster Audigy 2 ZS
2X Western Digital SATA Raptor 74GB 10,000RPM - RAID0 onboard VIA8237 SATA
2X Western Digital SATA CaviarSE 120GB 7200RPM - RAID0 onboard Promise 20579 SATA
Plextor 708/A CD-R/W DVD+-/R RW (1.07 firmware)
Windows XP SP2

Have you run any program to test the cpu at 100% like super PI or the like?
People just dont understand 3Dmark is a Graphics benchmark and a synthetic one at that. CPU tests in 3dmark account for so little and there are so many variables that can affect the test like drivers, OS, BIOS settings, programs in the background that I dont consider 3dmark a worthy benchmark for machine power except for GPU performance.
Use something else like SUper PI, or Sandra, to see how much Horseporwer your machine really has.
Jorge

Connection problem in Linux systems: redhat and suse

I install Sun Java System Application Server Platform Edition 9.0 in RedHat and SuSE linux in my intranet with wondows XP.
The servers run correctly in both RedHat and SuSE systems. That means in each system, I can use: http://localhost:8080 or their ip address to access the servers, for example, http://192.168.0.5:8080.
However, in the windowsXP computers, I cannot access the servers running in both Linux systems by using their ip address (for example, http://192.168.0.5:8080). In addition, in RedHat, I cannot access the application server running in SuSE and vice versa.
The network works correctly as I can use SSH to log in both RedHat and SuSE linux by using their ip address.
And in both RedHat and SuSE, I can access the application server running in windows XP computer.
I thought the problem came from the configuration of the linux. But I donot how to solve it.
Could anyone give me some suggestions?
Thanks a lot.
Kevin

iliasver wrote:
Hello. I have huge problem with my blackberry z10 device. I bought my device six months ago from Greece which mostly I live there and they told me that this device is unlocked. I used my device with most of all three mobile networks in Greece and it works just perfect. Now that I am in Canada fro work and I must stay a lot, my device does not work on any mobile network of Canada. Specifically I'm at manitoba province and I have not find yet some a one to help me about my problems. Every mobile network I test does not work properly. From the most of them they tell me that my device does not use the frequency band that use north American, and some of them tells me that my device is not fully unlocked. Is that possible? My device have fully unlocked, medium unlocked and fully locked systems? Does anybody knows what to do to fix it? And how you figure this out that my device is locked or unlocked, cause every single video I saw it seems to me that my device is unlocked. Thanks and hope someone to give an answer to my problem.
Can't be used, wrong frequency. Canada, North America and half of South America use GSM 850 / 1900 MHz.
Rest of the world use GSM 900 / 1800 MHz.

PS2 Issue only with Neo and Neo2 not Neo 4 or later boards?

I just wondered. Is the so called PS2 issue something that is only relevant to the Neo and Neo2 motherboards, or does it plague the MSI Neo4 Platinum/SLI, MSI Neo4 Diamond, MSI Neo4 Platinum as well?

The issue where the use of a PS2 keyboard or mouse, for certain users, causes the system to freeze during post/boot, or sometimes cause random shutdown or startups. I've found several references to it on this forum. Thats why I want to know more before I decide on which motherboard to get.

Adobe AIR on RedHat and SUSE Linux

Hi,
I am trying to install AIR 2.5 runtime on RedHat Linux and SUSE Linux . When I try to do it on RedHat, I get the following error:
error while loading shared libraries: libpangocairo-1.0.so.0: cannot open shared object file: No such file or directory
Can anyone help me fix it. I assume I will get something on the same lines on SUSE as well? Also, has anyone successfully done what I am trying to do? I can see that Adobe AIR page doesn't mention RHEL and SUSE (but openSUSE) supported, but still.
Thank you!
-Amit

The only version that works on RHEL 5 is 2.0.4. Check this thread for more details:
http://www.cherpec.com/2010/12/adobe-air-2-5-1-glibc_2-7-error/
It works as I tested on RHEL 5. But to ship AIR heelp to customers, this is for sure not a solution.

3000+ Venice and Neo2??

I was wondering what BIOS version I need to support a Venicie. Seeing as my 3000+ Winny died on me and I had to RMA the motherboard I am in need of replacement since I got an OEM CPU :( I just got the motherboard back from MSI about 2 weeks ago so should it have the most current BIOS? Thanks

Quote from: Odysseus011 on 02-June-05, 06:32:39
Well I just recently purchased a Venice 3200+ and the K8N neo2 Platinum Mobo. I am running bios v1.8 as it is the latest version. My experience with this bios, is not good. I know that this chip is not officially supported so I cannot do to much complaining but, what I have found is that I cannot OC at all... even the D.O.T causes my pc to crash. I had an xp 3200+ prior to this and had it happily OC'd to 2.51 GHz stable with Prime95. I have yet to run Prime at stock speeds with this one, mainly because I am afraid of the results. But even at 2.2 GHz Prime would detect an error in less than 10 minutes.
Overall, I cannot say that this bios version is stable with the Venice core, hopefully MSI will come out with a Bios version that supports this chip soon.
It's certainly NOT the BIOS-Version. You just got a CPU that doesn't OC well. I am running a Venice 3500+@2582 MHz primestable with BIOS V1.8, V1.7 or V1.6 with 1.35 VCORE. The only thing that doesn't work with the new cores and this BIOS reviisions (1.5-1.8) is C&Q.

9i, Linux RedHat and INSO filter not working

Hi,
In October last year in this forum,
How to position the applet
information given was that one needed to download
a path for bug N0 2037255 to get the filter to work.
Talk was then about RedHat v7.1. The patch seems
to be needed in our v7.3 as well.
We have fetched the patch and read it's documentation.
It talks about RedHat Advanced Server. Is this Advanced
Server a requirement for the patch to install and work properly? Wouldn't it work as well in "standard" RedHat?
Regards
/Per

Hi Max,
I have tried but got the same error as ctxhx. I'm indoubt why
Redhat 7.1 is certified for O9i (I found it in Oracle's
Metalink)?
Rgds,
Raymond
or directly from the shell with :
/9.0.1/ctx/bin/ctxhx /home/oracle/test.rtf /home/oracle/test.txt
>>
I get this error :
/9.0.1/ctx/bin/ctxhx: error while loading shared libraries:
/oracle/product/9.0.1/ctx/lib/libsc_ut.so: undefined symbol: stat
Is anyone aware of this problem ? How can I solve it ?hi !
have the same problem with ctxhx. try /9.0.1/ctx/bin/ctxhxO
binary. does work for me.
regards
max

[Athlon64] HyperX and Neo2 Series Compatibility?

Hey, I recently got a 1gb set of PC3200(KHX3200AK2/1G) for my K8T Neo2 Series Board and they don't work. The system stops at early chipset initialization. I talked to Kingston and MSI, hey both gave me things to try; changing the CAS latency to 3, Enabling the IT timing; and still no luck. They both said they should work. Any ideas or things I'm doing wrong? Cheers
System- VIA K8T800 Pro Chipset Based- K8T Neo 2 series
- AMD 64 3000+
- 512 PC3200 400mhz Kingston (trying to get the hyperx to work)
- ATI 9550 AGP Graphics Card

https://forum-en.msi.com/index.php?topic=84584.0
https://forum-en.msi.com/index.php?topic=84599.msg603441#msg603441
https://forum-en.msi.com/index.php?topic=88896.0
Sticky posts contain a lot of superb info. One only has to click and read...

Thermalright XP-120 and neo2 platinum

Has anyone tried to use this heatsink with a "platinum" series motherboard?
I have a neo2-pfs platinum.
I emailed thermalright about the fit of the heatsink and got this response:
"XP-120 will fit your motherboard if you can tilt 4 capacitors away from CPU socket to clear the heatpipes loops. the underside of XP-120 fin will clear up to 38mm tall chipset cooler."
Does anyone know if this height is tall enough to clear the stock passive northbridge heatsink on a platinum series?
I guess I could always get a shorter cooler for the northbridge.

the way the caps are laid out, the tilting is VERY minor, so I don't believe this will be much of a problem.
I don't think it will be able to clear my northbridge heatsink though. May have to replace it with a shorter passive cooler. (which will be ok because it will get plenty of air from the fan on top of the xp-120)
here's a link to this cooler. anyone thought about it for a platinum series board?
http://www.systemcooling.com/thermalright_xp120-01.html

3.8GHZ with FX-55 and Neo2

Look at this. The MSI Neo2 holding up an FX-55 at going on 4GHZ.
http://xtremesystems.org/forums/showindex.php?t=44504

ah nothing
wait till i get my submerged in inert fluid cryogenicly frozen system on my fx59 system up and running
tbh wooooah nice

Thermalright XP-120 and NEO2-FIS2R

Anyone using the Thermalright XP-120 heatsink with the NEO2-FIS2r mobo?

my friend does and he finds it good

MSI P45 Platinum and Neo2-FR

Hello everyone!
I have small question will P45 Platinum and P45 Neo2-FR work fine with those memories OCZ DDR2 PC8500 4096MB KIT, Reaper HPC, 2x2048MB, Heatpipe, (CL5-5-5-18) ?

Quote from: Jack the Newbie on 04-October-08, 18:05:31
A few facts about the P45 Chipset and those memory modules:
1) According to Intel Specifications, the Intel P45 Chipset natively supports DDR2-667 and DDR2-800 modules, that is it.
2) Those OCZ Modules are essentially DDR2-800 modules (use DDR2-800 chips). DDR2-1066 is an overclocking rating that will force you to overvolt these sticks above DDR2 standard voltage.
3) EPP profiles are pre-programmed OC profiles that are not fully supported on Intel Chipsets but are for NVidia Chipsets only.
The bottom line is:
-> To run those modules @standard DDR2-800 speed should be no problem (neither on the P45 Platinum nor on the P45 Neo2-FR.
-> Trying to get the system stable @DDR2-1066 speed may or may not work stable, as this means overclocking both the memory controller AND the modules. So, get ready to some tweaking of memory related BIOS settings (inlcuding memory voltage, MCH Voltage, DDR reference voltages and timings) to find stable settings for non-standard clock speeds.
So I shouldn't have any problems to start computer after I connect everything? And what IF I will be unlucky and those memories won't work ?

Redhat and java

Anybody know how to fix this problem so you can compile java at the command line in linux?
[me@localhost me]$ java
libgcj-java-placeholder.sh
This script is a placeholder for the /usr/bin/java and /usr/bin/javac
master links required by jpackage.org conventions. libgcj's
rmiregistry, rmic and jar tools are now slave symlinks to these
masters, and are managed by the alternatives(8) system.
This change was necessary because the rmiregistry, rmic and jar tools
installed by previous versions of libgcj conflicted with symlinks
installed by jpackage.org JVM packages.
[me@localhost me]$

Try installing an SDK.Obviously one is installed or I would not havegotten
this script message.Um, check again please.
I'm not trying to be funny, but I think YAT might be
on to something.This is funny, your both on to nothing really. I can compile fine in netbeans. When I go directly to the bin directory in my SDK I can compile and run programs perfectly. It's this lame script that pops up when you just run "java" from the command line.
What would give you the idea that my SDK is not installed other then your making a lame attempt at being funny. Of course it's installed. Um.....
Okay, larry and Mo responed, anybody have some actual responses?

SCEP for Linux (Redhat) and Disconnected WSUS

I operate in an environment that has an isolated network and I leverage a disconnected WSUS for updates. This works well with updating the Windows SCEP client. Can the disconnected WSUS also be used to update the SCEP running on Linux (Red Hat)? What would
be the configuration of the Linux client?
Thanks
Tom
Thomas Talley

Hi Thomas,
http://technet.microsoft.com/en-us/library/hh508781.aspx
System Center 2012 includes an Endpoint Protection client for Linux and for Mac computers. These clients are not supplied with Configuration Manager; instead, you must download the following products from the
Microsoft Volume Licensing Service Center.
System Center 2012 Endpoint Protection for the Mac
System Center 2012 Endpoint Protection for Linux
Important
You must be a Microsoft Volume License customer to download the Endpoint Protection installation files for Linux and the Mac.
These products cannot be managed from the Configuration Manager console. However, a System Center Operations Manager management pack is supplied with the installation files, which allows you to manage the client for Linux by using Operations Manager.
For more information about how to install and manage the Endpoint Protection clients for Linux and Mac computers, use the documentation that accompanies these products, which is located in the
Documentation folder.

CoreCenter with an AMD 3000+ s939 and Neo2 Platinum with 1.4 (original) bios

hi everyone, ı think ı need some help. I install Windows Xp with SP1 and ı downladed and installed the nforce drivers (5.10 version) from NVidia's site not MSI's. C'n'Q function is enabled in the bios, I install AMD's latest XP driver and set"minimum power consumption" from power options. And finally ı install CoreCenter. My question and problem is; Cooling function i think works (as ı see from CoreCenter and windows) temps go up and down but Quiet (fan speed) function [I mean CPU (~3183 rpm) an NB (~5113 rpm) fan speeds always go up of their full limits] only works when I enable the C'n'Q option in CoreCenter; the program is not adjust fan speeds automatically for lower noice, I have to enable C'n'Q option in CoreCenter every time ı restart my system.What's wrong? MSI's nforce drivers and C'n'Q ı think works before I format the system. Please Help
thanx for replies

When you are using CnQ the system will automatically reduce fan speed (at least it should) when it is in the reduced operating mode. Your core clock goes down and your effective speed (MHz) also goes down when you are surfing or doing non-demanding tasks. If you start playing games or doing anything cpu intensive the system should revert to it's highest setting which includes the fans on high speed. If you are getting abnormal behavior with Core Center you can refer to the many posts on that subject. Core Center has many bugs and Known Problems. Most people including myself chose to use other software for this purpose. If it works for you, go for it.

RedHat 9 and Neo2

Similar Messages

Maybe you are looking for