Rediscover using OEM in Oracle 10.2.0.4

Hi,
Can somebody post detailed steps as to how to rediscover using OEM. (I have performed at the session level)
My system is Oracle 10.2.0.4 RAC on RHEL.
Example: Steps to rediscover an instance (or) agent (or) listener using OEM.
To put it in simple terms...mys listener is showing DOWN status in OEM, but is actually UP when I go in and check at the session level.
I do not want to restart the agent at the sesion level which I have already done. Kindly help.
Edited by: Redstorm on Feb 24, 2009 7:09 PM

Do you have a lot of jobs scheduled via OEM ? (you can save the definitions in the job library and re-submit them later if not. You may also have to reset the backup preferences etc.)
This seems strange. Is there an error message with the listener status (click on the Down targets from the homepage.)
Also can you provide the output from the agent status.
cheers,
graham
Edited by: Graham_R on Feb 24, 2009 5:12 PM

Similar Messages

Backup Failure using OEM (Oracle 9i)

Backup Failure using OEM
I have oracle 9i (windows 2000 server)
I tried to make a fullbackup using OEM, it gives me NO error messages
I got result file with 890 MB (my Db is not huge),
but when I go back to the JOBs in OEM I found the status of the job FAILED
I tried to do the same thing using incremental backup level 0, but I got the same result
any Idea why the job didn't complete successfully
thanx in advance

Here is the deal.
I need to be able to work in the OEM for my class. (Oracle DBA in Training) It is a significant part of my grade to be able to find the required help through forums like these to help me get the backup/recovery process to work through the OEM. My books deal with the OEM in a Win2000 Pro/Server environment, and don't take into consideration the variances in XP Pro. My install works great, other than I am receiving a "Fail" on my OEM Backups under Jobs. It further explains that I do not have the proper permissions to perform the backup job that was created. My instructor is completely hands off when it comes to help. So if anyone has run into this problem and been successful in fixing the problem without using a different utility. Please let me know.
Thanks in advance,
Vic

Oracle VM Monitoring Using OEM

Hi,
We need to monitor Oracle VM using OEM, we have Oracle VM setup with Two Guest servers (Linux and Windows 2003 server).
we have OEM 10.2.0.5.0 setup, and enabled Oracle VM Management Packeage also.
Could you please help someone, how to configure and monitor Oracle VM using OEM.

Hi vdosi,
Thanks for ur promy reply....
am just confusing abt this configaration....first we need to register virtual server in OEM console or create virtual server pool....but while registering Virtual server
it telling "You are not yet licensed to use the Oracle VM Management Pack. If you like this functionality, please see your super administrator about obtaining a license"
In our Oracle VM server, we are created Two Guest server (Windows 2003, RHEL 4)..Now we need to monitor Oracle VM and two guest servers....How can do this...if it possible...can u send me the document......please help me on this.....
thanks in advance..
Jayaram

Performance Report using OEM-11g

Hi All,
Is there any way to get the Monthly Database performance report using OEM Grid Control... I am able to grab only one week data in Historical option....
Thanks In advance

I have the same problem in OEM 11g, the calendar on the Performance tab - Historical selection - only shows "January 0" and can not be changed...a bug?
Oracle 11.2.0.2.0 database on AIX.
Using OEM Cloud 12c on some test instances again 11.2 on AIX and it works fine there.
Any updates?

Monitoring WCI 10.3.0 & UCM 10.1.3.5 using OEM 11g R1

As part of the Service Monitoring for our OFM-OUCM environment, we have implemented OEM 11g R1. Our Dev/Test/UAT/Prod environment is comprised of SOA 10.1.3.5, WCI 10.3, UCM 10.1.3.5, multiple DB instances 10.2.0.3/10.2.0.4, IDM 10.1.4.0.1. We are able to monitor SOA 10.1.3.5, IDM 10.1.4.0.1 & the databases. But the 11g Agent wasnt able to discover the targets for WCI 10.3.0 & UCM 10.1.3.5. Is there a way to monitor UCM 10gR3 & WCI 10.3 using OEM 11g R1 or do we need to downgrade the OEM version.
We are able to see the WCI Products in the Hosts -> Configuration tab in OEM. But we are not able to monitor these as targets.
WebCenter Interaction API Service 10.3.0.0.0
WebCenter Interaction Automation Service 10.3.0.0.0
WebCenter Interaction Content Upload Service 10.3.0.0.0
WebCenter Interaction Directory 1.0.0.0.0
WebCenter Interaction Document Repository Service 10.3.0.0.0
WebCenter Interaction Identity Service for LDAP 10.3.0.0.0
WebCenter Interaction Image Service 10.3.0.0.0
WebCenter Interaction Notification Service 1.0.0.0.0
WebCenter Interaction Portal 10.3.0.0.0
WebCenter Interaction Remote Portlet Service 1.0.0.0.0
Thanks

Did you check http://www.oracle.com/us/products/enterprise-manager/039537.pdf ?
and http://www.oracle.com/technetwork/oem/soa-mgmt/index.html
MANAGEMENT PACK FOR WEBCENTER SUITE
Regards
Rob
http://oemgc.wordpress.com

Trying to register 10.2.0.3 db in Rec Catalog using OEM, getting errors

Hi all,
I didn't know whether to post this here in the RMAN forum or in the OEM Grid Control forum, but the issue is more related to RMAN, so I'll post it here, and hope someone can help me out!
I have a new 10.2.0.3 database that I am getting configured to manage using OEM Grid Control. Through the OEM interface, I am trying to register this database with my recovery catalog - the recovery catalog is version 10.02.00.02. When I try to register this new db with the recovery catalog, I am getting this lengthy collection of errors:
Recovery Manager: Release 10.2.0.3.0 - Production on Wed Jan 30 14:58:36 2008 Copyright (c) 1982, 2005, Oracle. All rights reserved. RMAN> connected to target database: INSIGHT (DBID=4016731035) RMAN> connected to recovery catalog database PL/SQL package RMAN.DBMS_RCVCAT version 10.02.00.02 in RCVCAT database is not current PL/SQL package RMAN.DBMS_RCVMAN version 10.02.00.02 in RCVCAT database is not current RMAN> echo set on RMAN> register database; RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-03002: failure of register command at 01/30/2008 14:58:40 RMAN-06004: ORACLE error from recovery catalog database: ORA-06550: line 1, column 2453: PLS-00302: component 'RESTORECMD_T' must be declared ORA-06550: line 1, column 2424: PL/SQL: Statement ignored RMAN> exit; Recovery Manager complete.
It sounds like it has something to do with the fact that my recovery catalog database is not at a current version?? In the OEM tool, I went to the page that lists the Recovery Catalog, and tried hitting the Update button, and it succeeded, but the Recovery Catalog version did not change, it is still at 10.02.00.02.
Can anyone give me some assistance on this one?
Thanks!
--Brad

Hi,
please check with
select comp_name,status,version from dba_registry;
COMP_NAME
STATUS VERSION
Oracle Database Catalog Views
VALID 10.2.0.3.0
Oracle Database Packages and Types
UPGRADED 10.2.0.3.0
The UPGRADED status is not good. Run utlrp.sql again and then again as rman user the "upgrade catalog". Now it should work fine.
Bye
Matthias

Using Mts With Oracle Database

I m building Com using Visual basic.I have made them transactional using MTS.first i have firstly user Sql Server database.the components are working properly.but when i
have made back end as Oracle the Trasactions
fails. if i make them not Mts object then it will function properly. I have read article from microsoft site "Using Mts with Oracle".acc to them a file named XA80.dll should be on ur system on which mts is runing.I have made a database server and a client on which Mts is installed.But XA80.dll
was not found. whats the problem .tell me solution if anyone can.
i have installed OEM GUI which installs XA80.dll on ur system.but when i tested microsoft test program which checks weather ur Oracle supports Mts or not fails at the end. When calling XA_Open_Entry it gives error with return code -3
Plz tell me Solution
Thankx in advance
null

Hi,
Oracle JVM in 11gR2 (the latest release) supports Java 1.5 only. So no, you won't be able to load classes compiled with target class level 1.6 into DB. But you surely may explicitly set target class level of 1.5 in javac and then load compiled classes. Or you may not use 1.6 features in your code and then CREATE JAVA SOURCE from it.

OEM in Oracle 10g

Hi All,
I have installed oracle 10g on HP-UX 11.23 Itanium server. I have created two databases with different OS User. both databases are running very fine. But problem is that OEM for one of them is working and for other database OEM is not working. Both databases are in archival mode.
Please reply me as early as possible.
Regards,
Nirav Patel

hi
some problem i was face yesterday..
u want to manage 2nd db through OEM but ur not able to do so.
first what is ur db name 1st and 2nd...
and what is way u use to access OEM if u use OEM through webbrowser then what URL u give...
if u give http:/"host-name":5500/em/console --- this is for ur first db..
5500 is a oracle port to access db through OEM..
then u find out ur 2nd db port. for u do this cmd.
u go cmd prompt
cmd>set oracle_sid = "2nd db name"
cmd>emctl status dbconsole
after enter this cmd. u will get URL AND PORT FOR UR 2nd database..
good luck
mohdi Jr.dba

How to automate DB health check report using OEM 11g

Hi,
I have been asked to share the DB health check report using OEM 11g. Could you please let me know how to achieve this and the report should go to his email.
Thanks in advance,
Bala

check,
manually you can schedule it through dbms_hm
http://www.oracle.com/technetwork/articles/sql/11g-resiliency-091703.html

Error Using OEM to create export files

Hi
I get the following error whenever I try to use OEM to create export files (login to OS as oracle user -> http://localhost:1158/em -> login as SYSTEM -> Maintenance -> Export to Export Files (with oracle user as host credentials)
>>>
Validation Error
Examine and correct the following errors, then retry the operation:
Error - ERROR: NMO not setuid-root (Unix-only)
>>>
From what I've read in this forum and in others is that the problem is often related to the owner/group permissions associated with the bin/nmo and bin/nmb files. However I've tried the posted solutions by changing the owner/permissions as suggested, but this does not help. I get the same error regardless if the files are owned by oracle or by root.
Here is some more info
>>>
[root@rhlinux bin]# id oracle
uid=501(oracle) gid=502(dba) groups=502(dba)
[root@rhlinux bin]# ls -ld /app/
drwxr-xr-x 4 root root 4096 Jul 6 13:36 /app/
[root@rhlinux bin]# ls -ld /app/oracle/
drwxrwxr-x 5 oracle dba 4096 Jul 10 10:13 /app/oracle/
[root@rhlinux bin]# ls -ld /app/oracle/product/
drwxrwx--- 3 oracle dba 4096 Jul 6 16:04 /app/oracle/product/
[root@rhlinux bin]# ls -ld /app/oracle/product/v10.2.0/
drwxr-x--- 58 oracle dba 4096 Jul 11 15:31 /app/oracle/product/v10.2.0/
[root@rhlinux bin]# ls -ld /app/oracle/product/v10.2.0/bin/
drwxr-xr-x 2 oracle dba 8192 Jul 20 11:19 /app/oracle/product/v10.2.0/bin/
[root@rhlinux bin]# ll nm?
-rwxr-x--- 1 root dba 18462 Jul 6 16:16 nmb
-rwxr-x--- 1 root dba 19624 Jul 6 16:16 nmo
>>>
>>>
[oracle@rhlinux bin]$ uname -a
Linux rhlinux 2.6.9-34.0.2.EL #1 Fri Jun 30 10:23:19 EDT 2006 i686 i686 i386 GNU/Linux
>>>
>>>
[oracle@rhlinux bin]$ sqlplus system@dware
SQL*Plus: Release 10.2.0.1.0 - Production on Thu Jul 20 16:34:16 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
>>>
>>>
[oracle@rhlinux bin]$ emctl status agent
TZ set to Canada/Saskatchewan
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
Agent Version : 10.1.0.4.1
OMS Version : 10.1.0.4.0
Protocol Version : 10.1.0.2.0
Agent Home : /app/oracle/product/v10.2.0/rhlinux.swlocal_DWARE
Agent binaries : /app/oracle/product/v10.2.0
Agent Process ID : 32098
Parent Process ID : 30792
Agent URL : http://rhlinux.swlocal:3938/emd/main
Started at : 2006-07-20 12:00:05
Started by user : oracle
Last Reload : 2006-07-20 12:00:05
Last successful upload : 2006-07-20 16:27:29
Total Megabytes of XML files uploaded so far : 1.54
Number of XML files pending upload : 0
Size of XML files pending upload(MB) : 0.00
Available disk space on upload filesystem : 47.83%
Agent is Running and Ready
>>>
>>>
[oracle@rhlinux bin]$ emctl status dbconsole
TZ set to Canada/Saskatchewan
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://rhlinux.swlocal:1158/em/console/aboutApplication
Oracle Enterprise Manager 10g is running.
Logs are generated in directory /app/oracle/product/v10.2.0/rhlinux.swlocal_DWARE/sysman/log
>>>
Any other ideas what might be causing this problem?
Thanks and take care,
Shayne

From what I've read in this forum and in others is
that the problem is often related to the owner/group
permissions associated with the bin/nmo and bin/nmb
files. However I've tried the posted solutions by
changing the owner/permissions as suggested, but this
does not help. I get the same error regardless if the
files are owned by oracle or by root.
I am not sure which "posted solutions" you had, but this is related to not running root.sh which must be run against the Agent Home.
1. Stop the Agent (emctl stop agent) while connected to the OS as Oracle user (normally oracle) that installed Grid Control
2. Connect to the OS as root and run root.sh from Agent ORACLE_HOME (if you do not have root access, your System Admin can do it)
3. Start the Agent (emctl start agent) while connected to the OS as Oracle user

Schedule Disoverer reports Using OEM

Hi All
Has anyone scheduled Oracle Discoverer reports using OEM ?
Thanks
Diwakar

Are you using OEM 9i or 10g GC?
Statistics gathering is done in a different way depending on which platform you are on. However, when you submit a job to do anything including stats gathering, the job is scheduled by OEM and sent to the agent. So, you can close your "client" because it's not doing anything. The job has been submitted and will run as scheduled.

How to run an OWB 11gR2 process flow using OEMS Jobs?

How to run an OWB 11gR2 process flow using OEMS 11g Jobs?
In other words iam trying to create an Oracle Enterprise manager job for scheduling and running an OWB Process flow.
Can any one of you please route me to a documentation for the same,or enlist the steps involved?

Hi,
look at OWB API Reference (it is of 11gR1 OWB release but you can apply this procedure to OWB11gR2 as well)
http://download.oracle.com/docs/cd/B28359_01/owb.111/b31279/api_4sqlforjobs.htm#BABEBGHA
Regards,
oleg

Comparing schema using OEM 10g

Hi,
IS there any way to compare schema from 2 different schema for Prod and test environments using OEM 10g.
I have a comparison script which will work for mr but the report generated is not easily readeble.
Please point out the steps if there is any option to do so in OEM 10g. My database version is 9i.
Thanks
Anky

You can use Oracle Enterprise Manager Grid Control or SQL Developer, in either case you need to have the change management pack licensed other then that you are looking at 3rd party tools such as Toad, older version of OEM or custom scripts.
You can try some of these tools which include scripts, etc. as these may also be of help to you.
http://dgielis.blogspot.com/2006/01/compare-2-oracle-schemas.html
Mike M.

How to use OEM to moniter sql server 2000

Hi,
I need to learn How to use OEM to moniter sql server 2000.
Can anyone help me and give me some website or documents
to read?
So I can learn to do this job.
Thanks.

See Note 115302.1 in Metalink.oracle.com
in how to use OEM Diagnostic pack addon for SQL Server
Or search for
oem "user events"
to build your own monitor script.

Backup Failure using OEM

Backup Failure using OEM
I have oracle 9i (windows 2000 server)
I tried to make a fullbackup using OEM, it gives me NO error messages
I got result file with 890 MB (my Db is not huge),
but when I go back to the JOBs in OEM I found the status of the job FAILED
I tried to do the same thing using incremental backup level 0, but I got the same result
any Idea why the job didn't complete successfully
thanx in advance

Use command line -> rman .

Rediscover using OEM in Oracle 10.2.0.4

Similar Messages

Maybe you are looking for