Reference Data of Customer from R3 to CRM

Hi Group,
    we downloaded ECC customers to CRM 5.0. now we have a situation where we want to see reference data of Customer: 1) Prev.aact no, 2) Buying Group in CRM.
   these feilds are maintained in ECC in "Company Code Data" of Customer Master under "Account management" tab.
   can somebody help me figure out which fields in CRM are these mapped to and where can i see them in CRM "BP" transaction.
        Appreciate your time. and help is awarded.

Hi Anu,
As Jai mentioned it is not easy to bring in additional customer master fields from R/3 to CRM during the download.
This can acheived by extending the middleware functionality. Also you need to extend the CRM BP with these additional fields.
First identify the fields on CRM BP in order to recive the data from R/3 fields. For this you may use some of the unused fields in the CRM BP or extend the BP using EEWB to accomodate new fields.
Then you have to enhance the middleware by writing a custom function module to move new field data into bapimtcs structure. Then move the data from bapimtcs structure into appropriate CRM fields. Also you need to take the precaution for delta changes on these fields.
This process is involved lot of development effort and you should be able to get some code samples from this forum's previous threads.
Here the note which exactly addresses your requirement : 863611
Reward points if it helps
Regards,
Paul Kondaveeti
Message was edited by:
Paul Kondaveeti

Similar Messages

Replication of CUSTOMER from ECC to CRM

Hi CRM Guru
Is that anyway to download the partner function (sold-to, ship-to, payer, bill-to, employee) in the customer sales area data from ECC to CRM (created as BP relationship in CRM) in the INITIAL LOAD?
For example:
Customer in ECC 100000000 have the partner function in the partner function tab under the sales area data
SP Sold-to = 100000000
SH Ship-to = 100000001
PY Payer = 100000002
BP Bill-to =100000003
And create those relationship in CRM under the Relationship area.
Please advice.
Thank you

Hi.
If what you are trying is to replicate the partner functions as relationships, first be sure that you have replicate the customer (the main and the others on partner functions sales areadata) using the middleware object CUSTOMER_MAIN.
Then run the object CUSTOMER_REL for the main partner. This will result on the relationship creation at CRM side, representing the partner functions on R/3 site.
Be aware that if in R/3, the main partner represents all the partner functions, when it is replicated into CRM, the system does note create a relationship to himself, but this not means that the partner can be used in sold to party, payer, ship to and bill to partner functions on documents.
Regards.
SM

Customer master data replication probelm from ECC to CRM system.?

Hi..Gurus,
Intial downloading was done for master data and transaction data..but after 10 days.. some changes in ECC system will not replicate to CRM system..delta down loading working or not how i can check ? or i have again do the intial downloading for customer_main..plz help me..?
Truly,
San Rao.

Hi,
make sure that the Middleware is activated in R/3 table TBE11 for
application component BC-MID as below:
Application ID Active Text
BC-MID X Middleware
Also, in R/3 table TBE31 make sure the following even has been activated
00001321 BC-MID PI_BP_CUSTOMER_BTE_1321
In R/3 table CRMRFCPAR make sure that the delta load has not been
deactivated for the object Customer_Main....
If this is ok check filter on the object Customer_Main in trx. R3AC1 in
CRM to make sure they havent filtered out the relevent BP's
If you have a BP expample use CRM trx. CRMM_BUPA_MAP to gather the BP
from R/3 into CRM...this will either lead to a sysfail in CRM SMQ2 or
A short dump in ST22 if there are any errors...
Also, after using trx. "CRMM_BUPA_MAP" check in SMw01 for Bupa_Main
bdocs...if there are errors they will norally be on the validation of
the BP in CRM and the bdocs will have errors...
Regards, Gerhard

Replication of Customer from ECC to CRM --- Multiple A/c Groups

Hi Experts,
I am trying to replicate customer master data from ECC6.0 to CRM7.0 and vice versa. Replication is up and running right now for only one Account Group (GEN-Z created for business) in ECC.This A/C Group (GEN) is mapped to BP Classification "Customer" in PIDE.
Now, I want to replicate customers with 5 other A/c groups to CRM as well. In PIDE, I have maintained a total of 6 entries for a/c groups to classifications (ECC to CRM). All 6 A/c groups are mapped to "Customer" classification.
This "customer" classification generates customers in role "Sold-to-party". For STP role mandatory fields have been matched to GEN A/c Group.
My main issue is how do I make sure there is no mismatch of customer fields in ECC and CRM as All other a/c groups that have also been mapped to the same "Customer" classification in the same way as A/c Group GEN. Problem would crop up because, there are diff set of fields kept mandatory for different a/c groups.
From CRM to ECC, I can select the relevant a/c group from "Classification" tab in role Sold-to-party.
But, there would be the same problem of mismatch of mandatory fields between Sold-to-party and all other a/c groups.
Is there a solution to this problem. How can I make sure replication works for multiple A/C Groups too.
Thanks and Regards
Varun Taneja

Hi Robert,
I read that in some other post too, it worked for someone. But here it is, I would like some advice from you...
Suppose, I have 2 A/c Groups... X and Y, both with different mandatory field settings in ECC.
Now, In BP field grouping on CRM side, I have made field settings(mandatory etc.) according to X A/C group. So when I select, X from classification tab during BP creation, replication would be successful.
And, if I select Y from classification tab, it would give an error "Fill in required mandatory fields" since fields have not been synchronized with Y. How can I take care of this issue.
Also, for ECC to CRM, how do I select multiple classifications, it doesn't allow for more than one entry for one classification.
I hope I am clear about my requirement.
Please share your feedback.
Thanks and Regards
Varun Taneja

Download Customer from SD to CRM; Note 301059

hello experts,
We are implementing ECC 6.0 & CRM 5.0.
In SD Customer Master, the field "VAT registration number"; in Control Area; is populated which results in the customer not being downloaded in CRM. Note 301059 says that this field has to be deleted for a non-EU country, here the country in question being India.
Is there any way work around this restriction? That is, maintain the field & be able to download the data by some modifications. Kindly share your views if you have encountered this issue.
Regards,
Deepanshu

Hi Deepanshu
I think most probably, this field has been made mandatory at your end which should be changed to "optional". To do this, goto SPRO --> Financial Accounting --> Accounts Receivable and Accounts Payable --> Define Screen Layout per Activity (Customers).
Select "Create Customer (Accounting)" and tick the blue lens on top so that it will go to next screen. Now double click "General Data" under "Field status" and select "Control". In this, against the field "VAT registration number", select "Opt.Entry", save it and then try once again.
Thanks
G. Lakshmipathi

Custom data for equipment load from ECC to CRM 7.0

Dear All,
Please suggest the steps required to trace the initial/delta load data for equipment from ECC to CRM & carry out the enhancement for missing fields data.
Thanks & Regards
DB

Hi,
You have to use download object CRM_EQUI_LOAD. First ensure that all the materials and business partners from ECC to CRM are downloaded.
For more details jut go through
http://help.sap.com/saphelp_sm40/helpdata/en/94/657a3b233b8541a18ed80b424bf1f8/frameset.htm
Best Regards,
Rajendra

How to read and display table data entries from ERP in CRM

Hello experts,
I am new to CRM. I need to read data base entries from ERP in CRM system. What would be the best way to do . The table is a standard SAP table with a custom include (several customer fields). Calling a web service would be the best way..? or is there any other way that I can do it too.
Also, to display these entries what would be the best tool? Should I built my own transaction/report to do it?
Any advise or guidance would be a great kick start to learn the CRM development environment.
Regards,
jaffery

Hi,
Check the below wiki link if it helps.
http://wiki.sdn.sap.com/wiki/display/CRM/Howtodisplayaz-tableinanassignmentblock
Also, you can try an option of transaction launcher.
Hope this helps.
Regards,
Chandrakant

Data updation from R3 to CRM using CRM_DATAEXCHG_BADI.

Hi,
While transferring the data of equipements from R3 to CRM, we want to transfer the status of the equipement (data element J_STACT).
I am using IF_EX_CRM_DATAEXCHG_BADI~CRM_DATAEXCH_R3D_MBDOC_FILL to update the status before transferring the data to CRM.
Here I am getting status of equipment from R3. Now how do I update the status in ct_bus_trans_msg.
I need to update ct_bus_trans_msg-ORDPRP_OBJL_I_D-IOBJECT_ID.
Thank you.

Hi,
Internal table ct_bus_trans_msg have several segments.
These segments are similar to Bdoc meaasge.
There is segment called STATUS_H. You need to populate this segment with status form R/3.
Please reward points if useful
Murali

Customer replication from ECC to CRM

Hello everyone,
I am having some difficulty replication a customer from ECC to CRM.
In our environment, customers are generally created from CRM & then replicated to ECC.
Now we are creating a new Distribution channel & hence want to extend all our existing customers to the new DC.
Since I am a SD Consultant, I was thinking of extending the customers in ECC.
I tried extending a customer which was originally created in CRM. When I extended it to the new DC in ECC, it dint come over to CRM.
I cannot see any BDOC in SMW01 also.
Also when I checked the Filter setting in R3AC1 for objects BUPA_MAIN & Customers .. there is nothing set in the filters for the source ECC.
Do I have to check any additional objects which I need to check ?
Or is it that no settings means nothing created in ECC would come over ?
Can anyone guide me so as to understand why this is happening.
Also if there are any filters which i need to check, can anyone tell me what tcode & what adapter objects do i need to check ?
Thanks
Vin
Edited by: vinit parkar on Aug 3, 2010 10:58 PM

Hi,
If you are downloading Customers from ECC(XD01/XD02/XD03) then CRM uses the adapter object CUSTOMER_MAIN and not BUPA_MAIN. You can check if there are any filters in this object.
Alternately you can check if the delta is active in ECC. I do not remember the transaction for checking this but you can find the same from the menu path.
Cheers
Binai

Business partner(employee) is not replicated from ECC to CRM

The Business partner Not replicated in CRM.Two Sales organization have been maintained for the employee for the different time lines in ECC.Checked the BDOCs and the validation error occur in FM CRM_BUPA_MAIN_VAL .The BDOCs message was saying the BPGUID was missing .Could anyone please suggest what could be the root cause of the data not replicated from ECC to CRM.

Hi Pragnya,
This is the case where at the time of creation of BP there was some issue with replication.
The BP itself is not there in CRM or only the changes are not reflected?
In such scenarios, perform following steps for successful replication:
1. Go to TCode: CRMM_BUPA_MAP
2. Enter the BP no. {initially it says it does not exist}
3. Enter ERP customer no. and press enter, the BP GUID gets filled
4. Click on "Gather Information about customer" [you can see the status of the object]
5. Now again enter the BP no. -> The customer is available in CRM now.
Regards,
Swagi

Migration from ISU to CRM

Hi,
We are populating SAP ISU via Emigall and proposing to replicate all customer data including BP, CA and Contract and all technical master data including CO, Premise and Device. This is a lot of objects and data to replicate from ISU to CRM which will mean our migration takes a long time.
Are there any other options to populating data into CRM? Would you advice LSMW load into CRM and Emigall load into ISU?
KR,
Michelle

Hi we are proposing to use Emigall (Data migration workbench) to load the following into ISU:-
BP
CA
Contract
CO
Premise
Device
Reg Structure
Documents
Dunning etc
We are proposing to use CRM middleware to replicate the following objects from ISU to CRM:-
BP
CA
Contract
CO
Premise
Device
My concern is that the replication from ISU to CRM is very slow and will be our bottleneck during migration weekend. I am looking for ways to speed up this replication including alternative ways of populating CRM.
KR,
Michelle

REplication of Material Master from ECC to CRM - NO_STRUCT_DEFINITION Error

HI CRM Experts,
I am trying to replicate master data for material from ECC to CRM. I have done the required customizing downloads. Done with downloading of DNL_CUST_PROD0 and DNL_CUST_PROD1. I have got the Material types in CRM with categories R3PRODSTYP, R3PRODHIER & R3MATCLASS. There is no filter setting in R3AC1 for MATERIAL. Now when I am trying to do initial down load for Material through R3AS and monitoring in R3AM1, the status shows running with Block = 0. Having checked in SMQ1, am getting error as System Fail with error Exception Condition with "NO_STRUCT_DEFINITION" raised.
I have checked with the Product structure in ECC and compared with R3PRODHIER in CRM. They are same.
Kindly let me know what am I missing out.
Regards,
Ravindra Valy

Hi,
I had applied the not earlier itself.
Lateron I realized that the note I had applied at CRM end. I have to apply at ECC end aswell.
After applying at ECC end, the problem is resolved.
Thanks
Ravindra Valy

Distribute new entries against existing reference data, Integrated Planning

Dear Experts,
Within IP, I struggle with how to distribute new entries against existing reference data.
Example:
Reference data:
Product   /   Customer   /   amount
P1               C1                  100
P1               C2                  150
P2               C2                  120
P2               C3                  100
New data:(data entered on product level, therefore not assigd to customer yet)
P3          #                    150
How can I distribute product P3 to Customers with reference to the data on product P1 ?
Many thanks,
Erik Pos
Edited by: Erik Pos on Jan 5, 2010 3:52 PM
Edited by: Erik Pos on Jan 5, 2010 3:54 PM

Hi Hyma,
This documentation indeed indicates that you can use other characteristic values in the parameter group to be used for reference, good news !, but this is based on SAP-BPS ?
The SAP-BW IP documentationn does not include this information can you confirm this solution works for Integrated Planning using the conditions within the function distribute with reference data ?
Many thanks,
Erik Pos

Customer classification data from ECC to CRM

Dear Friends,
We have the middleware active between ECC and CRM for customers. Now we have the requirement to download customer classification data (XD03->Extras->Classification) from ECC to CRM. Please suggest me how we can map this data in CRM and what middleware developments are required?
Thanks,
Rajinikanth G

Added new fields using AET and did Middleware enhancements as per the note - Note 736595 - Exchange of EEW fields with R/3 customer master.
Thanks,
Rajinikanth G

Industry error while doing replication of customer from R/3 to CRM

Hi,
We have production system already implemented and going for roll out for another company both R/3 & CRM.
We have generated conditional objects while doing roll out phase. From then we are getting this error.
Problem:
Customers are not getting replicated to CRM. And in SMW01 the error log says
"Industry 300 not defined for industry system SAPS
Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN."
Since we are going for roll out we have done initial load of all conditional objects
like 'DNL_COND_A002' etc.
After running we did checked in R3AM1 - everything was DONE - in green colour.
But in SLG1 - Display log - there are several entries in Red colour.
Message text says -
"It is not possible to change client-independent Customizing objects
Diagnosis:
Change of client-independent Customizing objects is not permitted in the client in which the transfer of data for table T682 is executed.
System response:
As table T682 contains client-independent Customizing, data transfer is interrupted.
Procedure for System Administration
Provide users with the appropriate authorization to execute data transfer in a client in which changes to client-independent objects is permitted."
Now queues are pilled up with the industry error and don't know how to correct these errors.
Please help.
Regards,
Dhanraj Dange

Hi pankaj,
Step 1:After completing Initial Download tranfer of data takes place from R/3 to CRM system in the form of Customers or employess.
Bulk data will be flown in the first step.
I f there are any errors ,we solve the errors and replicate them manually by using CRMM_BUPA_map.
Step2:There are few customers which are created daily in SAP SD or R/3 and these customers are transfered from R/3 to CRM .
So my question is Is this b'cos of Delta Download or Bcoz of some other Reason.
If so "Is there any specific name for this.
Regards,
divya

Reference Data of Customer from R3 to CRM

Similar Messages

Maybe you are looking for