Reg. copy text in FD32 through BDC
Hi all,
Can you please tell me the code to fill text area in FD32 using BDC?
actually i am trying to use BDC to update or insert customer credit management data to copy the data which is in excel file over to the text area(If you go to FD32, the status view, there is a button 'text'
which is where I have to copy this data) .
I am using classical BDC (i.e. i am giving file name , from line,to line ,from column and to column as input )
HELP!
Regards
shailesh
Bhanu,
I've modified the previous message with a correction that, I had used this for uploading Activity lines Longtexts.
One more thing: After I faced some problem, I used split text in the code. i.e., Splitting the longtext into several lines (72 char each). Show these code lines to your ABAPer, may be he might be able to draw some clues.
In the BDC lines alongwith other fields the gold line below
PERFORM FILL_BDC_DATA USING ' ' ' ' ' ' 'BDC_OKCODE' '=MX07'.
PERFORM FILL_BDC_DATA USING ' ' ' ' ' ' 'BDC_CURSOR' 'QMICON-LTAKTION(07)'.
PERFORM FILL_BDC_DATA USING ' ' ' ' ' ' 'VIQMMA-MATXT(07)' FS_FIELD-MNTXT7.
PERFORM SPLIT_LONGTEXT USING COL_COUNT.
Code for Form SPLIT_LONGTEXT is attached herewith (MATXT1 to MATXT7 are longtext split into 7lines )
Best of luck
KJogeswaraRao
Similar Messages
-
Error while uploading Long Text in IA05 through BDC.
Dear Team,
Good Day.
While we are trying to upload the Long Text through BDC for IA05 operations the text is updating in Database but it is not visible in the long Text field. Is it possible to upload the long text through BDC or any bapi's which can be used for the same. Any configuration needed for this please do the needful.
Regards,
Bhanu.Bhanu,
I've modified the previous message with a correction that, I had used this for uploading Activity lines Longtexts.
One more thing: After I faced some problem, I used split text in the code. i.e., Splitting the longtext into several lines (72 char each). Show these code lines to your ABAPer, may be he might be able to draw some clues.
In the BDC lines alongwith other fields the gold line below
PERFORM FILL_BDC_DATA USING ' ' ' ' ' ' 'BDC_OKCODE' '=MX07'.
PERFORM FILL_BDC_DATA USING ' ' ' ' ' ' 'BDC_CURSOR' 'QMICON-LTAKTION(07)'.
PERFORM FILL_BDC_DATA USING ' ' ' ' ' ' 'VIQMMA-MATXT(07)' FS_FIELD-MNTXT7.
PERFORM SPLIT_LONGTEXT USING COL_COUNT.
Code for Form SPLIT_LONGTEXT is attached herewith (MATXT1 to MATXT7 are longtext split into 7lines )
Best of luck
KJogeswaraRao -
Possible to copy text to clipboard through script?
I'm currently creating a temporary textPath and copying that to the clipboard with the app.copy() method. Is there a way to just simply copy the text directly to the clipboard rather than having to do it through copying an object?
Im not a fan of scripting the clipboard what do you need to to this for?
-
Long text uploading problem in BDC
Hai Gurus
please help me, it is urgent
i want to upload more than 200 characters filed from flat file to every inspection lot record usage decision(QA11) through BDC for every inspection lot
Brief description about my problem:
in the transaction QA11 , enter any new inspection lot number and press enter , in this next screen (after pressing enter) in usage decision sub screen , create long text for UD icon is there in that we can enter long text(any number of characters ) through manually for single inspection lot but i want to enter long text for UD through BDC for more than one inspection lot automatically
points will be rewarded
ThanksHai Gurus
please help me, it is urgent
i want to upload more than 200 characters filed from flat file to every inspection lot record usage decision(QA11) through BDC for every inspection lot
Brief description about my problem:
in the transaction QA11 , enter any new inspection lot number and press enter , in this next screen (after pressing enter) in usage decision sub screen , create long text for UD icon is there in that we can enter long text(any number of characters ) through manually for single inspection lot but i want to enter long text for UD through BDC for more than one inspection lot automatically
points will be rewarded
Thanks -
Long text problem while uploading Inspection plan through BDC.
Hi,
I am facing some problem while uploading the inspection plan. There are few MICs for which we are having long text, while uploading the inspection plan through BDC - some other long text is getting copied into the MIC's long text. After checking I came to know that in function module, read_text - some text which is stored in ABAP memory is getting copied into the inspection plan.
I am working in SAP release 4.7. I have checked with SAP notes: 97419, but it is also not satisfying.
Waiting for quick solution.
Thanks in advance.
FahiéHi a®s,
Thanks a lot for your kind reply.
My requirement is I want to maintain long text for few MICs (which are not having long texts at MIC level) in inspection plan (QP01).
When I am trying to manually assign the MIC's to inspection plan (QP01), long text is copied whereas I am not clicking the long text icon in (QP01). Long text is not maintained in MIC level, still some long text is copied to this MIC. This was also happening while uploading the inspection plan thro' BDC.
I believe what you have mentioned about function module SAVE_TEXT cannot be used here since long text is already copied before we pass the long text. Also if we pass some long text, still apart from the long text what we have passed there is some other long text copied (extra long text).
Waiting for quick solution.
Thanks in advance.
Fahié -
Uploading Sales Text Through BDC
hi friends,
i want to upload Material Sales Text Through BDC Program.
Please let me know how to do this.
regards,
srinivashi friends,
i want to upload Material Sales Text Through BDC Program.
Please let me know how to do this.
regards,
srinivas -
How can i get production version value(verid) for luck through bdc.
HI..
i have one requirement..that in c223 tcode while i luck the production version through BDC in my report program as i given bellow...i upload mat.no , plant, production version and 1(for luck)...
req:: i want while i given production version for particlular plant and material no...that production version should be luck....
so in standard tcode c223 how can i get value to compair it with my input production version value then i will close that...
program:::
report ZC2232
no standard page heading line-size 255.
*include bdcrecx1.
Tables : mkal.
data : nodata value '/' .
data : CTUMODE type c value 'E'.
DATA : CUPDATE TYPE C VALUE 'L'.
DATA: BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
messages of call transaction
DATA: MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
data: begin of HEADER OCCURS 0,
data element: MATNR
MATNR_001(018),
data element: WERKS_D
WERKS_002(004),
data element: PLNNR
PLNNR_003(008),
data element: CP_STTAG
STTAG_003(010),
data element: ENTRY_ACT
ENTRY_ACT_005(011),
data element: PLNAL
PLNAL_004(001),
data element: FLG_SEL
FLG_SEL_01_006(001),
data element: PLANTEXT
STLAL_004(002),
DATUV_005(010),
data element: WERKS_D
WERKS_008(004),
data element: PLN_VERWE
ktext_005(001),
data element: PLNST
DELKZ_005(001),
data element: LOSGRVON
LOSVN_011(017),
data element: LOSGRBIS
LOSBS_012(017),
data element: PLNME
PLNME_013(003),
data element: PLNME
stlal_014(002),
end of HEADER.
data : begin of it_header occurs 0,
matnr like marc-matnr,
werks like marc-matnr,
verid like mkal-verid,
mksp like mkal-mksp,
end of it_header.
data : exnum(40) type c,
exnum1(40) type c,
cnt type I,
CN(2) TYPE C,
c1 type c value '(',
c2 type c value ')'.
start-of-selection.
parameters: p_file like rlgrap-filename.
at selection-screen on value-request for p_file.
call function 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
importing
file_name = p_file.
start-of-selection.
call function 'WS_UPLOAD'
exporting
CODEPAGE = ' '
filename = p_file
filetype = 'DAT'
HEADLEN = ' '
LINE_EXIT = ' '
TRUNCLEN = ' '
USER_FORM = ' '
USER_PROG = ' '
DAT_D_FORMAT = ' '
IMPORTING
FILELENGTH =
tables
data_tab = it_header
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
NO_AUTHORITY = 10
OTHERS = 11
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
DELETE it_header WHERE MATNR IS INITIAL.
LOOP AT it_header.
*start-of-selection.
*perform open_group.
perform bdc_dynpro using 'SAPLCMFV' '1000'.
perform bdc_field using 'BDC_OKCODE'
'=ENTE'.
perform bdc_field using 'BDC_CURSOR'
'MKAL-WERKS'.
perform bdc_field using 'MKAL-WERKS'
it_header-werks.
perform bdc_field using 'MKAL-MATNR'
it_header-matnr.
perform bdc_dynpro using 'SAPLCMFV' '1000'.
perform bdc_field using 'BDC_OKCODE'
'=PICK'.
perform bdc_field using 'MKAL-WERKS'
it_header-werks.
perform bdc_field using 'MKAL-MATNR'
it_header-matnr.
*>>>>>>>>>>>>>>>>>>>>here what logic can i write****
clear cnt.
do 15 times.
cnt = cnt + 1 .
CN = CNT.
exnum = 'MKAL_EXPAND-VERID'.
concatenate exnum c1 cn c2 into exnum1.
*perform bdc_field using 'BDC_CURSOR'
exnum1.
GET PARAMETER ID 'VER' FIELD EXNUM1.
CALL TRANSACTION 'C223' AND SKIP FIRST SCREEN.
if ( it_header-verid = EXNUM1 ).
exit.
endif.
enddo.
****************************************************end***>>>>>>>>
perform bdc_field using 'BDC_CURSOR'
exnum1.
perform bdc_dynpro using 'SAPLCMFV' '2000'.
perform bdc_field using 'BDC_CURSOR'
'MKAL_EXPAND-PLNTY'.
perform bdc_field using 'BDC_OKCODE'
'=PRFG'.
perform bdc_dynpro using 'SAPMSSY0' '0120'.
perform bdc_field using 'BDC_OKCODE'
'=RW'.
perform bdc_dynpro using 'SAPLCMFV' '2000'.
perform bdc_field using 'BDC_OKCODE'
'/ECANC'.
perform bdc_field using 'BDC_CURSOR'
'MKAL_EXPAND-VERID'.
perform bdc_dynpro using 'SAPLCMFV' '1000'.
perform bdc_field using 'BDC_OKCODE'
'=SAVE'.
perform bdc_field using 'BDC_CURSOR'
'MKAL-WERKS'.
perform bdc_field using 'MKAL-WERKS'
it_header-werks.
perform bdc_field using 'MKAL-MATNR'
it_header-matnr.
perform bdc_dynpro using 'SAPLCMFV' '1000'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_transaction using 'C223'.
endloop.
*perform close_group.
*& Form bdc_dynpro
text
-->P_0161 text
-->P_0162 text
form bdc_dynpro USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
endform. " bdc_dynpro
*& Form bdc_transaction
text
-->P_0351 text
form bdc_transaction USING TCODE.
call transaction 'C223' using bdcdata
mode CTUMODE
update CUPDATE
messages into messtab.
if sy-subrc <> 0.
message e000(zmm01) with
'Check your input data'.
endif.
endform. " bdc_transaction
*& Form bdc_field
text
-->P_0346 text
-->P_0347 text
form bdc_field USING FNAM FVAL.
if fval <> nodata.
CLEAR BDCDATA.
BDCDATA-FNAM = FNAM.
BDCDATA-FVAL = FVAL.
APPEND BDCDATA.
endif.
endform. " bdc_fieldl_nl := dbms_xslprocessor.selectNodes(l_n, '/TaxInvoice/TaxInvoiceDocument');try to change as follow
l_nl := dbms_xslprocessor.selectnodes(l_n,'/TaxInvoice/TaxInvoiceDocument','xmlns="urn:kr:or:kec:standard:Tax:ReusableAggregateBusinessInformation:1:0"');Edited by: AlexAnd on Aug 17, 2011 12:36 AM -
I find that I can no longer copy text to the clipboard.
Why can I no longer copy text to my clipboard?
Here is a little more information. Last week everything worked fine. I opened the same document yesterday and tried to copy some text to the clipboard and now I get an error message saying "can not copy to clipboard, internal error. I also find that pdf files from the internet will not load and all I get is a small black x box in the upper left corner of the screen. Went through the steps in control panel and adobe is enabled.
-
I'm unable to copy text out of an ADE book.
Recently bought a new Windows PC and transferred all files to it from my old one. Installed ADE successfully, gave it my authorization ID and all is well. I'm able to open the book I'm interested in and browse all through it. But I'm unable to copy text out of it. I highlight the text in the book and when I either right-click or pull down the Edit menu, the Copy function is grayed out and clicking on it does nothing. Ctrl-C also doesn't do anything. This worked on my old PC. What's up here? Thanks for any help. Jim
I am having the same exact problem.
-
How to upload datas in excel sheet through BDC
Hi,
I know how to upload datas in Text format through BDC...Suppose even when datas are in .xls format,I saved that file as Text(tab delimited) format...then file become text format and it can be easily uploaded....
So, I want to know How to upload datas in excel sheet through BDChi,
try this Example, hope useful to u, assign me point.
report ZMSV1_BDC_CALL
no standard page heading line-size 255.
*include bdcrecx1.
*parameters: dataset(132) lower case.
DO NOT CHANGE - the generated data section - DO NOT CHANGE ***
If it is nessesary to change the data section use the rules:
1.) Each definition of a field exists of two lines
2.) The first line shows exactly the comment
'* data element: ' followed with the data element
which describes the field.
If you don't have a data element use the
comment without a data element name
3.) The second line shows the fieldname of the
structure, the fieldname must consist of
a fieldname and optional the character '_' and
three numbers and the field length in brackets
4.) Each field must be type C.
Generated data section with specific formatting - DO NOT CHANGE ***
data: begin of record,
data element: BUKRS
BUKRS_001(004),
data element: KTOKK
KTOKK_002(004),
data element: NAME1_GP
NAME1_003(035),
data element: SORTL
SORTL_004(010),
data element: ORT01_GP
ORT01_005(035),
data element: LAND1_GP
LAND1_006(003),
data element: SPRAS
SPRAS_007(002),
data element: BANKS
BANKS_01_008(003),
data element: BANKK
BANKL_01_009(015),
data element: BANKN
BANKN_01_010(018),
end of record.
End generated data section ***
data: itab like record occurs 0 .
data: it_bdc type bdcdata occurs 0 with header line.
data: it_msg type bdcmsgcoll occurs 0 with header line.
parameter p_file type rlgrap-filename default 'c:\vendor.txt' obligatory
start-of-selection.
perform open_dataset using p_file.
perform open_group.
*perform close_group.
*perform close_dataset using dataset.
*& Form open_dataset
text
-->P_P_FILE text
form open_dataset using p_p_file.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
CODEPAGE = ' '
FILENAME = p_file
FILETYPE = 'DAT'
HEADLEN = ' '
LINE_EXIT = ' '
TRUNCLEN = ' '
USER_FORM = ' '
USER_PROG = ' '
DAT_D_FORMAT = ' '
IMPORTING
FILELENGTH =
TABLES
data_tab = itab
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
NO_AUTHORITY = 10
OTHERS = 11
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " open_dataset
*& Form open_group
text
--> p1 text
<-- p2 text
form open_group .
loop at itab into record.
perform bdc_dynpro using 'SAPMF02K' '0105'.
perform bdc_field using 'BDC_CURSOR'
'RF02K-KTOKK'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RF02K-BUKRS'
record-BUKRS_001.
perform bdc_field using 'RF02K-KTOKK'
record-KTOKK_002.
perform bdc_dynpro using 'SAPMF02K' '0110'.
perform bdc_field using 'BDC_CURSOR'
'LFA1-ORT01'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFA1-NAME1'
record-NAME1_003.
perform bdc_field using 'LFA1-SORTL'
record-SORTL_004.
perform bdc_field using 'LFA1-ORT01'
record-ORT01_005.
perform bdc_field using 'LFA1-LAND1'
record-LAND1_006.
perform bdc_field using 'LFA1-SPRAS'
record-SPRAS_007.
perform bdc_dynpro using 'SAPMF02K' '0120'.
perform bdc_field using 'BDC_CURSOR'
'LFA1-KUNNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
'LFBK-KOINH(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'LFBK-BANKS(01)'
record-BANKS_01_008.
perform bdc_field using 'LFBK-BANKL(01)'
record-BANKL_01_009.
perform bdc_field using 'LFBK-BANKN(01)'
record-BANKN_01_010.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
'LFBK-BANKS(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPMF02K' '0210'.
perform bdc_field using 'BDC_CURSOR'
'LFB1-AKONT'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0215'.
perform bdc_field using 'BDC_CURSOR'
'LFB1-ZTERM'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0220'.
perform bdc_field using 'BDC_CURSOR'
'LFB5-MAHNA'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPLSPO1' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=YES'.
call transaction 'FK01' using it_bdc mode 'A' update 'S'
messages into it_msg.
write:/ sy-subrc.
perform message_formatwrite.
refresh it_bdc.
clear it_bdc.
endloop.
endform. " open_group
*& Form message_formatwrite
text
--> p1 text
<-- p2 text
form message_formatwrite .
data:l_msg(10).
loop at it_msg.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = SY-MSGID
LANG = sy-langu
NO = SY-MSGNO
V1 = SY-MSGV1
V2 = SY-MSGV2
V3 = SY-MSGV3
V4 = SY-MSGV4
IMPORTING
MSG = l_msg
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endloop.
endform. " message_formatwrite
*& Form bdc_dynpro
text
-->P_0112 text
-->P_0113 text
form bdc_dynpro using value(p_0112)
value(p_0113).
it_bdc-program = p_0112.
it_bdc-dynpro = p_0113.
it_bdc-dynbegin = 'X'.
append it_bdc.
clear it_bdc.
endform. " bdc_dynpro
*& Form bdc_field
text
-->P_0117 text
-->P_0118 text
form bdc_field using value(p_0117)
value(p_0118).
it_bdc-fnam = p_0117.
it_bdc-fval = p_0118.
append it_bdc.
clear it_bdc.
endform. " bdc_field
Regards
fareedas -
A few days ago, I copied text from an iBook onto my text notebook. When I went to my kindle on my ipad and attempted to share a quote from it onto Facebook it pasted the previous quote from my iBook. I can't copy and paste anything except that quote. HELP
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
That I can tell, it isn't possible to highlight & copy text visible in the Contact Pane or the pane above it, the one with all the address book entries. Am I missing a way to do this?
It would sure make the use of the address book in Lightning a lot more convenient & quicker to use if one could do so. Please note I did not say edit. Instead, one is required to go through all the same steps as if editing. That is, open Properties & select the appropriate tab, then highlight & copy said information, instead of just being able to quickly copy the desired text.
It's only two more clicks, & the finding of the text, which can be cumbersome in some of the small field windows, especially for notes, but when doing this often, it sure becomes a pain. Notes in particular becomes a mini database for that address entry, whether it be your personal record for product information for something purchased (which could be extensive if many of the parts of something like a specific computer were noted), to sharing contact information with others.
A third use is when having to retrieve security information that is impossible to remember, such as your BTC account(s). By keeping it in the address book on an at-home computer, adds a bit more security, yet you can still easily access it.The add on More Functions for Address Book allows several copy functions.
https://nic-nac-project.org/~kaosmos/morecols-en.html -
Copying Text Variables still crashes In Design CS6
Copying Text Variables text boxes still crashes InDesign CS6 (or makes the program unresponsive) as they were in CS5. Any solution?
Hey thank you osgood for the reply!
When I look at code for long hours it sort of blurs together, and I miss things... I think that happens to the most of us
Ya I found what was blocking my text fields in my desktop.css
I primarily work through code view, and currently working on quite a few projects kind of makes your eyes miss the small errors.
Thanks again! -
HI,
We are using the BDC program to upload the manual bank reconciliations statement for FF67 and when we are uploading the BRS the receipt entries are updating but the payment entries are not updating (For the past 5 years working fine but, June 2011 onwards not working)
I really appreciate for early response
Thanks,
VenkataswamyWe are uploading the bank statement through ZBank T code (This T code created by using the BDC Recording program)
After uploading the bank statement immediately we are going to FF67 screen and giving the inputs and in this screen BDC program will copying all the entries which we have uploaded through BDC
After this we are going to the SM35 and processing the batch input session, once we processes the batch input session immediately it going to the post with clearing transaction and in this screen we are giving the inputs company code and bank account and account type
At the time of doing the post with clearing system is giving the error message there was no batch put session.
outgoing and incoming payments (F-28,f-53)IN BDC WE HAVE TAKEN THE LOGIC Reference filed at the header level(Check number)and amount should match.
Error Message
No batch input data for screen SAPMF40K 8000
Message no. 00344
Diagnosis
The transaction sent a screen that was not expected in the batch input
session and which therefore could not be supplied with data.
Possible reasons:
1. The batch input session was created incorrectly. The sequence of
screens was recordly incorrectly.
2. The transaction behaves differently in background processing in a
batch work process than when running in dialog (SY-BATCH is queried and
changes the screen sequence).
3. The transaction has undergone user-specific Customizing and therefore
certain screens may be skipped or processed differently, according to
the current user. If the person who created a batch input session is not
the same as the person now processing it, this problem may occur
frequently.
System response
None.
Procedure
For 1: Either re-create the session or process it in expert mode.
Correct the batch input program.
For 2. It is very difficult to analyze this problem, particularly in the
case that the screen sequence or the display-only options of fields
differ according to whether the transaction is being processed in the
background or as an online dialog. It could also be that this kind of
transaction cannot run with batch input.
For 3: Have the creator of the session process it. If no error occurs
now, then this is a program with user-specific Customizing.
Regards,
Venkataswamy
Edited by: venkataswamy bathini on Sep 8, 2011 8:42 AM -
I saved a document. Copied the document. Went to delete some extra characters and accidentally deleted the text of the entire document. I did not save a blank page. I cannot recover the lost text. Please Help. I'm NEW to Pages.
Hi Jan,
Copied text (or other copied material) is on the Clipboard, but only until you copy something else or log out of your account. If you act before doing another copy, you can paste the copied material back into the document. If you don't act right away, you may still have a path back.
One of the most useful keystroke combinations on the Mac is the "Oops! key," as a friend of mine once named it. That's command-Z, also known as "Undo". In some applications it will let you undo only a single step, but in others, including Pages, you can do repeated undos, so it's not quite so essential that you act immediately on making an error. Undo, done via the Oops! key, or via the Edit menu takes you back one change at a time. You can't skip any steps, so to get back to the state before the accidental deletion, you'll have to undo any work you've done since then. The memory of what to Undo disappears when you close the document or quit the application.
At that point you're at the mercy of your backup plan. If you've had Time Machine running, you'll be able to enter Time Machine and go back to an earlier, saved version of the file.
All these are in addition to the steps Ian suggested above.
Regards,
Barry
PS: Best piece of advice I can give a new Pages user (beyond Backup early and often) is to download and read through the first few chapters of the Pages '09 User Guide, available through the Help menu in Pages '09. Mostly pretty easy reading, and will get you through the basics without much trouble.
B
Maybe you are looking for
-
While working in Pages a folder appeared on my desktop with the Pages icon on it. I don't know how it got there. It will not let me move it on the desktop. I will not let me delete it. It will not let me do anything to it. Any idea what I might have
-
In acrobat 9, How Opening all files in one windows
Hello, In the past version (7) it was possible to open all the pdf in the same files with switching off in preferences>general the option show the documents in the task bar. Is that function lost with this version or is it possible to do the same thi
-
hi, I am running weblogic 6.1 with sp4. I have got two JSP which are using a datasource to connect to my database (oracle 8). When I got a java.sql.connection through the datasource, I am creating a statement a
-
How can I change my phone number on my iMessage. My email is showing correctly but the number is wrong.
-
Desktop Manager - Backup - Restore - No Contacts
Hi there. I tried to do a switch devices beteween blackberry 8520 to 9720. In the process, a back-up was created (.bbb file). The process went wrong for some reason so i tried to restore the database to the old phone 8520. The data was restored from