Reg : delta field for vbbe table while creating generic extractor

hi
i want to know which field should i use to do delta from vbbe table.
do i have to ask my functional consultant for what field should ibe using or
should i decide on my own
your answer would be defintely rewarded
thanks a lot
pallavi

Hi,
I would suggest you to create a new sales document and try to find out how does it the new entry is entered in VBUK, VBUP, VBEP and VBBE tables. Also, try to change / modify and delete existing record and see the changes in the table. You need to check which date fields or any deletion indicator is set / modified or not. Do all this one by one and see the changes in the tables. Also, all these changes will be logged in change log table such as CDHDR and CDPOS. This will have all the history of changes for one sales document. Once you identify all this then it will be very easy for you to identify the delta fields. The other way is to speak to functional consultant and ask him how all these tables are affected when you change / modify / add / delete records.
Hope this helps.
PB

Similar Messages

  • Error while creating Generic Extractor via Function Module

    Hello Guys
    I have created a Generic Extractor through a Function Module. I took the Standard FM: RSAX_BIW_GET_DATA_SIMPLE, gave it a new name and activated it. I made a few changes in it, like giving my structure name for E_T_DATA and giving the list of tables, from where I need to get the data. Then I created the datasource in RSO2 by giving this function module and the extract structure.
    The DS was created properly, but when I check in RSA3 for records, its giving me an error: ---> <b>The extraction program does not support object YCNA_INVY_TRNS</b>
    What do i do now? Can someone please tell me, what changes I need to make in the standard FM to suit my requirements??
    Thanks.

    Hi,
            Just try to reactivate the structure once again. And when you open the function module, if the problem still persists just try to press Return key several times. The message you are getting is just a warning message.
    PS: I am not sure whether this is the correct way, but i personally resolved this by pressing the ENTER key 4 or 5 times. So just give a try.
    Regards
    Sunil

  • How to check delta field in EDIDS table

    Hi,
    I have to create generic delta based on EDIDS (Status record) table. Since there is lot of data so i have to set delta point for this data-sources.
    Could you please help to find delta field in this table?
    Thanks & Regards
    Devesh babu

    Seems like there is no other fields which an be relevant delta.
    check docnum is possible to use as numeric pointer.
    Numeric pointer can be used when table allows for entering new records only.
    if there is no delta relevant field, go with full load every time.
    Use dso inyour data flow. so that we can introduce delta between dso to cube.
    data flow like this
    data source---> Every time full load to PSA--->You use delta or full load. it pulls latest request which is full to dso---> dso to cube, load delta dtp.
    Need to delete the psa request before every load.
    thanks

  • How to create a field value as constant while creating eCATT scripts

    Hello Guru's,
    I am updating thousands of records using eCATT.  How should i declare a field value as constant while creating a eCATT script it self,  so that it automatically picks that value and  update the records. I should not mention the field value in the upload file.
    Full points for the answer,

    Dont parameterize the value that you would like to keep as constant. Pass the default value to that feild while reocrding .

  • Exit to populate Vendor Batch field in Material tab while creating PO.

    Hi Experts,
    I need an exit to populate Vendor Batch field in Material tab while creating Purchase Order.
    Regards,
    Jayapal.
    Message was edited by:
            Jayapal

    HI ,
    Folllowing r the exits for po .
    Enhancement/ Business Add-in            Description
    Enhancement
    MEVME001                                WE default quantity calc. and over/ underdelivery tolerance
    MM06E001                                User exits for EDI inbound and outbound purchasing documents
    MM06E003                                Number range and document number
    MM06E004                                Control import data screens in purchase order
    MM06E005                                Customer fields in purchasing document
    MM06E007                                Change document for requisitions upon conversion into PO
    MM06E008                                Monitoring of contr. target value in case of release orders
    MM06E009                                Relevant texts for "Texts exist" indicator
    MM06E010                                Field selection for vendor address
    MMAL0001                                ALE source list distribution: Outbound processing
    MMAL0002                                ALE source list distribution: Inbound processing
    MMAL0003                                ALE purcasing info record distribution: Outbound processing
    MMAL0004                                ALE purchasing info record distribution: Inbound processing
    MMDA0001                                Default delivery addresses
    MMFAB001                                User exit for generation of release order
    MRFLB001                                Control Items for Contract Release Order
    AMPL0001                                User subscreen for additional data on AMPL
    MEQUERY1                                Enhancement to Document Overview ME21N/ME51N
    LMEDR001                                Enhancements to print program
    LMELA002                                Adopt batch no. from shipping notification when posting a GR
    LMELA010                                Inbound shipping notification: Transfer item data from IDOC
    LMEQR001                                User exit for source determination
    LMEXF001                                Conditions in Purchasing Documents Without Invoice Receipt
    LWSUS001                                Customer-Specific Source Determination in Retail
    M06B0001                                Role determination for purchase requisition release
    M06B0002                                Changes to comm. structure for purchase requisition release
    M06B0003                                Number range and document number
    MELAB001                                Gen. forecast delivery schedules: Transfer schedule implem.
    MEFLD004                                Determine earliest delivery date f. check w. GR (only PO)
    MEETA001                                Define schedule line type (backlog, immed. req., preview)
    ME590001                                Grouping of requsitions for PO split in ME59
    M06E0005                                Role determination for release of purchasing documents
    M06E0004                                Changes to communication structure for release purch. doc.
    M06B0005                                Changes to comm. structure for overall release of requisn.
    M06B0004                                Number range and document number
    Regards

  • Updating the VETVG table while creating the purchase order

    hi all,
       I have one requirement to calculated the delivery creation date while creating the Purchase Order. It is calculated based on the delivery date of PO. I have calculated that one but how to update it after calculation. Can any body give a user exit or BADI with implementation which will update the VETVG table while creating the PO.
    Thanks
    rajkumar

    hi sanjay,
    thanks for reply, I am using same BADI(ME_PROCESS_PO_CUST) and implementation(FIELDSELECTION_ITEM_REFKEYS). In this implementation i am setting the shipping data with SET_SHIPPINGDATA method . but after that the values are not updating the EKPV and VETVG tables but it is only showing in the screen. Can you give a idea where to pass these values so it will update the tables.
    thanks
    rajkumar

  • Delta Field for CRM Datasources

    Dear All,
    I am using the CRM datasources such as
    0CRM_SRV_PROCESS_H
    0CRM_SRV_PROCESS_I
    0CRM_SRV_CONFIRM_H
    0CRM_SRV_CONFIRM_I.
    I just want to know the delta for this datasources.. Please suggest.
    Thanks,
    Siva.

    Hi,
    Thanks for the quick reply..
    I have checked the table and find the field called "Delta". It is specified as
    AIMD -After-Images with Deletion Flag Via Delta Queue (e.g. BtB)
    I just want to know what is the delta field for this datasource.
    Thanks in advance.
    Thanks,
    Siva.

  • How can I know the delta field for CO-PA datasource?

    Hi,folks:
        How can I know which is the field assigned as the delta field for CO-PA datasource,as is noticed in the note that after PI2004 the logic has been turned to general datasource,but I can't find the datasource through RSO2.
        Full points will be given to u.
    Martin Xie

    Dear Martin,
    The CO-PA DataSources generated use a separate time stamp method for the delta procedure. This procedure means that client-independent DataSources in CO-PA are normally restricted to the clients in which they were generated.
    See this link...
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/97/6f4d40cef71059e10000000a155106/frameset.htm
    Also check ROOSOURCE in R3, asmentioned by Dinesh.
    Hope it helps.

  • Delta field for LO Extractor Datasources

    Hi All,
    Can anyone tell me how to find the delta field for LO Extractor. Because currently i am facing some problem in Delta like, if i do any changes in sales order in Item Level those changes are not reflected in RSA7. And the next change if i do it in header level i cld see the change along with my previos change being displayed. Problem is i dont find as seperate record for my changes in ITEM level.
    Ex. x   3040404  001 oooo ppppp oooo hhhh kkkk
            3040404  001 oooo bbbbb oooo hhhh kkkk  - this is for header level chnage
    Item level chnage: Not shown as seperate records
    Next header change displayed properly as above.
    Pls advise me this is a very urgent issue.
    Thanks.
    Bhu.

    Hi Nagesh,
    Thanks for your reply.
    Onething to tell is i am handling diff clients. All my clients r using 3.5 except this client. Very Unfortunate. They r using 2.1c. Its long back i used this version
    In LBWE i found they have only one update type i.e V3 update.
    I have checked SM13 also. There is one update records for each change in header level data. Also this time i found when i change Route i found one update record. But not when i change Schedule line date.
    Pls let me know if u need any further info. Anyideas welcome.
    Cheers!
    Bhuvana.

  • Time Stamp Delta field for Generic Data Source

    Hi Experts,
    I have a requirement to create a Generic Data Source based on view. This view on PA0006 and PA0105 tables.
    Will you please suggest me which field i have to take as delta field.
    Thanks In Advance.

    Also, make sure that whenever a new record is created in those tables, field AEDTM is getting updated with system date else you will miss new records in delta unless there is a change in those newly created records.
    Regards,
    Gaurav

  • Problem in Spras field for join condition in creating new views

    Hi,
    I want to create a new view for three tables t1 t2 and t3 say.....i want to join this three tables like
    table    field         table   field
    t1      mandt     =   t2     mandt.
    t1      vkbur      =   t2      vkbur.
    And other condition is t2-spras = 'E' now.... how should i give this condition in the join condition as u have to give the other table name and the field name on the other side too..... table t1 has no filed in its table for the field spras.........so i just have to give t2-spras as 'E'. But this is throwing error...Please help

    Hi,
    1.u can specify the first thing i.e. t1 mandt = t2 mandt and t1 vkbur = t2 vkbur in the <b>join conditions</b> even if there is no relation ship b/w t1 and t2 on vkbur.simply u specify the join condition manually.
    2.for the second thing....wat u did is rite.......
    I think it will work.
    Thanks ,
    Jyothi.D
    want to create a new view for three tables t1 t2 and t3 say.....i want to join this three tables like
    table field table field
    t1 mandt = t2 mandt.
    t1 vkbur = t2 vkbur.
    And other condition is t2-spras = 'E' now.... how should i give this condition in the join condition as u have to give the other table name and the field name on the other side too..... table t1 has no filed in its table for the field spras.........so i just have to give t2-spras as 'E'. But this is throwing error...Please help

  • Delta Extraction for Custom Table

    Hi All,
    I have a Custom Table in R/3 with several fields and only one date field ( Creation Date ).
    I need to Create a data source(Function Module extractor) and delta enable it.
    Since i have no field *change date* on this table, is there a procedure/method to captures all
    delta. Appreciate all your help.

    Hi
    If delta field is Date (Record Create Date or change date), then use Upper Limit of 1 day.
    This will load Delta in BW as of yesterday. Leave Lower limit blank. If delta field is Time Stamp, then use Upper Limit of equal to 1800 Seconds (30 minutes).
    This will load Delta in BW as of 30 minutes old. Leave Lower limit blank.
    If delta field is a Numeric Pointer i.e. generated record # like in GLPCA table, then use
    Lower Limit. Use count 10-100. Leave upper limit blank. If value 10 is used then last 10
    records will be loaded again. If a record is created when load was running, those records
    may get lost. To prevent this situation, lower limit can be used to backup the starting
    sequence number. This may result in some records being processed more than once;
    therefore, be sure this DataSources is only feeding an ODS Object.
    Hope it helps and clear.

  • Process to assign a project to view or table while creating in RPD

    Hi All,
    I am looking for option to assign a view to a particular Project while developing/creating RPD .
    Background : Created a view in production using MUD environment last week and reports relying on the view is working fine.Yesterday when i accessed the same RPD for addding additional columns view is unavailable.When contacted Admin they said that view is not assigned to any project.(Right click on view and selected project which is showing zero objects)
    Process i followed to create a view :
    1) Right click in physical layer of my project and new physical table and then added the query(It is joined with multiple tables) and i didnt deploy view(Today only i understood it leads to bad performance when it is fired).
    Also i imported a table for testing purpose even that table is not assigned to any project.
    Requesting to explain how we can assign a project while creating view/importing tables
    Thank you,
    Avinash

    Check your process again.!!
    Refer to : http://docs.oracle.com/cd/E21764_01/bi.1111/e10540/devenvironment.htm#i1049458
    Check : About the Multiuser Development Merge Process
    Warning about added objects. When a person checks out a project, they have the ability to modify that project in any way and check it back in. Deletions and modifications are ways in which the integrity of the project is maintained. However, adding objects might introduce objects into the repository that do not belong to any project. Therefore, all project related objects are checked and if a new object is found, a warning message appears.
    Caution:
    You must add newly created metadata to the project definition in the master repository for it to be visible in future extracted versions of the project. For example, if a developer checks out a project, adds a new object, and then checks it in, the new object is not visible in extracted versions of the project until it is explicitly added to the project definition. See "Creating Projects" for instructions.
    Mark if helps.!
    Thanks,
    SVS

  • Problem while creating generic DataSource using table

    Hello all,
    I am creating a generic DataSource using table EKBE. It is giving error " invalid extract structure template EKBE ". The reason is " The system tried to generate an extract structure with the template structure EKBE. This operation failed, because the template structure quantity fields or currency fields, for example, field MENGE refer to a different table (EKPO)".
    Could you suggest how to approach?
    Thanks,
    Zak.

    hi zahir,
    In your case the reference table used for quantity is ekko and the field is meins.
    and the reference table used for currency is ekpo and the field is waers.
    So you are not taking data from a single table. so you better create a view give the table name ekbe and select the corresponding fields you want.
    Add MEINS and WAERS and as well your required field in the view for example Zview and for Quantity field mention Zview as reference table and reference field as MEINS same for WAERS.
    try this if it doent work, tell me what error you are facing.
    with regards!
    ramesh

  • How to find Delta Field for 0MATERIAL?

    Hi,
    In general when we create Generic Data Sources with Delta Updating we give a Delta specific field name,like that how to find which is the field that is used for 0MATERIAL OR 0MAT_SALES,i am not able to find this information using RSA7 transaction.Suggestions to this would be helpful.
    Thanks in advance.
    Monica.

    Hi Monica,
    You can find the field that tracks the changes to the master data lets say some time stamp or changed date..etc.
    Thanks,
    Krish

Maybe you are looking for