Reg: File size in receiver file adapter

Hi all,
I am doing a proxy-> Flat file scenario. The output file size is nearly 15MB.
Can anyone please tell me whether file adapter in PI 7.1 can write this much big file?
or do i need to split it in integration engine?
Regards
Jagruthi

Hi Jagruthi,
>>The output file size is nearly 15MB.Can anyone please tell me whether file adapter in PI 7.1 can write this much big file?
Yes it can, provided there is less load on the server and the interfaces running are minimal. Also the frequency of this interface should be very less
>>or do i need to split it in integration engine?
If possible try to split records and create file be appending
Regards
Suraj

Similar Messages

Error dynamic File Name in Receiver File Adapter

Hi all,
Dynamic file name for Receiver file Adapter Problem
my multi mapping look like this in design mode
messages
     message1
          SD01_E
               FileName
               row
     message2
          SD02_E
               FileName
               row
by processing the xml look like this:
<ns2:SD01_E xmlns:ns2="urn:lsv.de/SAP/XXX">
<FileName>L40SA939.xiConstant</FileName>
- <row>
or
<ns2:SD02_E xmlns:ns2="urn:lsv.de/SAP/XXX">
<FileName>L40SA939.xiConstant</FileName>
- <row>
in file receivere adapter i have try this but it dos not work
payload:SD01_E,1,FileName,1
Error:com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 0(:main:, row:1, col:0)
is there any way to have access to Filename in different root elements??
regards
Ralf

Hi Ralf,
i think, you need for each XML msg (each different root element) a new adapter -> a new IF determination, new rec agreement and a new channel.
Regards,
Udo

"Put file" Option in Receiver File Adapter

Hi All,
Even though this seems to be a basic Question, i didn't found any answer to this in SDN.
Please share your thoughts on this.
We have one option called Put file in the receiver file adapter, When i read the use of this option i found some thing on SAP help.
But i am not clear about that option, if any one can clear that, it would be great.
Regards

Hi,
Put file is put the file directle in the receiver file path.
there are 2 options for put file
1. Directly    2. Use Temporary File.
Directly:   Directly will directly place the file in specified folder. In some cases ur file is large then this option wont work.
Use Temporary File:    In some cases u want to wait more time to create output file then the sepecified poll interval.In that cases in file is read some data and saved in a temporary file, after reading or completion of whole file then only only it will place the file in speficied server path.
Thanks,
Enivass

Output file formats in receiver file adapter

Hi,
Is it possible to create a tab delimited or a .CSV file in a receiver file adapter ??
-Teresa

HI,
It is possible to create a tab delimited/.csv file in a receiver file adapter by choosing "File content conversion" as a Message Protocol. But you need to do content conversion based on structure.
-Regards,
Moorthy

Payload as File name at Receiver File Adapter

Hi All,
I have a requirement for a PROXY to File Scenario where Receiver files has to be named dynamically with a value from the Payload that I get. Also the particular field that has the file name should be unmapped with the Receiver.
For Example,
   <row>
      <Name>Alex</Name>
      <DOB>27062014</DOB>
      <City>Delhi</City>
   </row>
If this is the Payload I get, I want the Receiver file name to be "27062014.txt". At the same time this particular field should not be mapped at the Receiver end.
I have tried a few links which confuse me further.Kindly help me,
Thanks in advance,
Sree Ram

Hi Sree,
Please check if the case is correct. refer the below discussion
Problem in variable substitution
reference blog for variable substitution
Variable Substitution for Directory or File name.
regards,
Harish

The file size of selected file in input file control is shown as 0 for multiple file selection in Safari 5.1

The file size of selected file in input file control is shown as 0 for multiple file selection in Safari 5.1. If you select single file, then it is able to return file size correctly. However, if you select multiple files, then the file size of each of the selected file is always returned as 0 from javascript. This works correctly in Safari 4.0 but it does not work in Safari 5.1.
How do I get the correct file size in Safari 5.1 ?

If you want to post (or send me) a link to the lrcat file, I'd take a look at it for you, and give you a break-down what's consuming all the bytes. But it might be fun to learn how to do that yourself (e.g. using SQL). I use SQLiteSpy, but other people have their favorites.. (or you can use a command-line client if you prefer..). One way: just run "drop table "{table-name}" on each table then look at filesize (do this to a copy, not the real thing).
Anyway, it's hard to imagine keywords and captions etc. taking much of the space, since even if you had 1000 10-character words of text metadata per photo average that still only adds up to 117MB, which isn't a substantial portion of that 8G you're seeing occupied.
Anyway, if you've painted the heck out of most of them and not cleared dev history, that'll do it - that's where I'd put my money too...
One thing to consider to keep file-size down:
===================================
* After reaching a milestone in your editing, take a snapshot then clear edit history, or the top part of it anyway (e.g. leave the import step), using a preset like:
Clear Edit History.lrtemplate
s = {
    id = "E36E8CB3-B52B-41AC-8FA9-1989FAFD5223",
    internalName = "No Edit",
    title = "Clear Edit History",
    type = "Develop",
    value = {
        settings = {
            NoEdit = true,
        uuid = "34402820-B470-4D5B-9369-0502F2176B7F",
    version = 0,
(that's my most frequently used preset, by far ;-})
PS - I've written a plugin called DevHistoryEditor, which can auto-consolidate steps and reduce catalog size - it's a bit cumbersome to use a.t.m. but in case you're interested...
Rob

My mac says that it has 40 gb of movies on it but when i finder search for file size, and for file type it gives me no videos

My mac says that it has 40 gb of movies on it but when i finder search for file size, and for file type it gives me no videos or movies. I have called apple 3 times and each time they do the same thing and then do something that takes awhile to finish so we hang up and then it never works.
Please Help

each time they do the same thing
And what thing might that be?

Creating .RTF output files - PI7.0 Receiver file adapter

Hi Experts,
I am currently facing an issue with the Receiver File adapter where in the output files are required to be of the format of .RTF (Rich Text Format).
The scenarios is an outbound proxy from SAP ABAP - > PI 7.0 -> .RTF File
All the data required to be present in the file will be coming in the source structure
Can the File Receiver Adapter handle this ?
Is there a way to generate Files with extension .rtf ??
It is a requriement since the output files will be used as Reports , and so the desired format.
I am unsure if I will have to use XSLT mapping , in this because i am new to that , Kindly let me know how to go about it ,. any links or pointers on how to achieve the same will be welcome.
thanks
Dev
Edited by: sd on Feb 17, 2010 8:23 AM

Thanks for your reponse Praveen
Can you please let me know how can i put the extension as .rtf for the output files i am generating ??
as far as the formatting is concerned ... it is like ... the header needs to be of a particular Font , a particular font size , bold etc and so is the case for line items
I am unsure if it is possible using an Adapter module as well
thanks
Dev

Setting dynamic file name in Receiver file adapter - not from payload

Guys I just remember reading a weblog but can't find it now that I need it, on how to set the file name in message mapping dynamically but not using any payload field.
Please let me know if you remember this.
Thanks a lot,
Viktor Varga

also u can check in
<a href="/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii file name(XSLT Mapping with Java Enhancement) using XI 3.0 SP12 Part -II</a>
<a href="/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14: The same filename from a sender to a receiver file adapter - SP14</a>

Renaming attachment file name in receiver mail adapter

Experts,
I have a file to mail scenario where an xml file is picked up and transformed into the target format in XI which has to be sent as an attachement in an email on the receiver side.
I am getting the mail with the attachement. But I would like to rename the attachment as the name of the picked up file.
I am using Adapter specific message attributes on both sides but the attachment is named as untitled.xml.
Please advise. Can this be achieved by using the swap bean or the message transform bean?
Regards,
Shobhit

Hi Shobhit,
The module tab of your mail adapter will look like this.
Processing Sequence
Module Name                                                            Type                                      Module Key
localejbs/AF_Modules/MessageTransformBean   rename LocalEnterpriseBean
sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean mail     Local EnterpriseBean
Module Configuration
   Module Key               Parameter Name             Parameter Value
      rename      Transform.ContentDescription                      File
      rename Transform.ContentDescription attachement;filename="yourfilename.ext"
      rename            Transform.ContentType                 application/text;name="yourfilename.ext"
Thanks
Amitanshu

Dynamic File name in Receiver File adapter

Hi,
My Scenario is Proxy to File.
I must create filename dynamically in the receiver file adapter by taking the sales order number and divison from the source.
How can i create a dynamic filename? i searched the forum, but i could not get the correct answer,
Please help me out.
Regards
Srinivas

Hi Srinivas,
> My Scenario is Proxy to File.
> I must create filename dynamically in the receiver file adapter by taking the sales order number and divison from the source.
public String targetFileName(String Sono, String Div, Container container) throws StreamTransformationException
DynamicConfiguration conf = (DynamicConfiguration)container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String MyFileName = sono + div + "<filename>"+".xml";
conf.put(key, MyFileName);
return MyFileName;
File name you can format according to your requirement.
And one more thing for this you have to specify the ASMA properties. For this check the below link step-1 and step-2.
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Regards
Ramesh

Empty file handling in Receiver File adapter (FCC - Premature end of file)

Hi
My interface is Flat file to Flat File interface with file content conversion which is working fine in SAP PI 7.1 EHP1.
If I want to process the empty file from sender system, PI should place the same empty file in the receiver FTP Location as per my requirement.
I am facing the below error message when PI tries to place the empty file.
Message processing failed. Cause: org.xml.sax.SAXParseException: Premature end of file.
But if I am not using FCC, I am able to get the empty file at the receiver end.
Please suggest on this, If I am using FCC in the receiver side.
Thanks
Gabriel

Hi Gabriel,
You can write a simple script to copy a file from source folder to target in case the fiel size is ZERO bytes. The script will not copy the file if the filesize is more than zero bytes, This will be processed normally by PI server. You can call the script from sender communication channel parameter : "RUN OS command before message processing". Could you please specify the Operating System (OS) you are using in your PI server.
Regards
Anupam

Dynamic File Name for Receiver File Adapter

Hi All,
How can we use dynamic name for Receiver file adapter?
Can anyone help.
Thanks in Advance
Chemmanz

Hi Chemmanz,
The dynamic filename generation concept is as follows.
In your filename field. just give a variable with % symbols. (eg: %file% ).
Now, under the option Variable Name Substitution, you can give how the value has to be created.
It can be your interface name, sender service name, etc or it can be some value dynamically from your payload.
For the former, your give
message:interface_name ,etc
and for the payload part you give,
Payload: "your element root which u wanna acecss"
Just check this link out,
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
And read the contents under variable substitution and it will help you understand the concepts better.
If you have any clarifications, do get back,
Regards,
Bhavesh

How to give a dynamic File Name for Receiver File/FTP Adapter.

Hi Experts,
    I have one scenario in which we are creating a flat file of IDOC which is coming from R/3 & sending it to FTP location. For this we have configured Receiver FTP adapter with File Name Scheme as "NT.out" & in File Consturction mode i have given as "Add Time Stamp".
    therfore while creating a file it is creating as NTyyyyMMdd-HHmmss-SSS.out
where as my requirement is only to to add Time & not the Date. (NThhmmss.out)
    How to do this ?
    for your info we are using ABAP Mapping.
    Pl help me
Regards,
Umesh

Hi Umesh,
      Add one more field to your target structure for your file name and populate that field as per your requirement like NTyyyyMMdd.out. In receiver communication channel use Variable subtiution option and give the refrence of Payload and file construction mode set as create.
And refer the below weblogs for Variable Subtiutuion File Name Scheme
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
Hope this way would be solve u r problem.
Cheers
Veera
>>>Reward points, if it is needful

How can i get message id as file name in Receiver Mail Adapter

Hi All,
We are working on file to mail scenario. Client requirement is " Attached file name should be the message id" How can we achieve this.
Thanks & Regards,
Purshothamm

Hi,
To have the file name as message id, I think the below blogs can help you
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii
Regards,
Vijay N

Reg: File size in receiver file adapter

Similar Messages

Maybe you are looking for