Reg.HTTPs

Hi,
Scenario is SOAP-XI->SAP. Here my sender is having a Webserver(Tomcat).
Webserver was configured with SSL. It will communicate over HTTPS to target components(in our case it XI).
So, here my question is Do XI need to install any kind of digital certificates and should enable to HTTPS port in this case?
Please help me here and no links pl

Dear Naresh,
Go through this SAP help documents for SOAP Sender related issue:
1. [HTTPs and SSL|http://help.sap.com/saphelp_nw70/helpdata/EN/14/ef2940cbf2195de10000000a1550b0/frameset.htm]
2. [SOAP Sender Adapter Configuration|http://help.sap.com/saphelp_nw70/helpdata/EN/0d/5ab43b274a960de10000000a114084/frameset.htm]
Regards
Praveen

Similar Messages

Reg http to jdbc Scenario

Hi all,
I am trying to execute a synchronous Http to Jdbc Scenario using MS Access table as my back end.
In design part ,I have followed the steps like
1. Created a http req ,jdbc req, jdbc response ,and then http response in Data types and the in Message types.
2.Created Outbound MI with http req and http response as input and output messages respectively,then Inbound message interface with jdbc req and jdbc response as input and output messages respectively.
3.In Message mapping with Http req and jdbc req as request mappings and jdbc response and http response as Response mappings following the Action and access Steps.
Thats Fine with design part
IN Configuration Part, Since it is a Http Sender ,i didnt create any sender agreement and sender communicatin channel.
Then Configured Jdbc adapter properly and i am able to access my table with that.
While Executing ,I can find that my message is sent in Runtime workbench and can find that Jdbc adapter is Running by showing green flag.
I was trying to send an empid of a table as key and expecting to retrieve the complete row of the corresponding key.
But I could not find the response even though everything is fine with XI.
Where Could be the problem ,where can I see the response from jdbc adapter .
Please help me out in solving this .
Thanks and Regards,
Kalpana

Hi Kalpana,
Can you check this weblog
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
This should help you...
Check the Response Mapping,also you have one IM with Reqest and Response mapping...
Also if you have SP16 then you can have sender CC for HTTP also ...
Regards,
sridhar

REG : HTTP connection

Hi All,
I have a file to HTTP syncronus scenario. To test the http URL i wrote a java program and tested it standalone from my PC with method POSTand it is working fine( ie i was getting a response). However when i use the same URL in XI( ie in HTTP receiver channel) I am facing a problem.( in moni i can see call adapter in red colour). Can anyone please provide me solution for this problem.
Thanks in Advance,
Siva

Hi,
File to HTTP Synchronous??? Can you please provide more details on what exactly are you trying for? and what is the error?

REG:http to webservice

Hi ,
Iam new to XI and had developed a http to webservice scenario.when I send the request through http adapter Ian getting the response as an error
<SAP:Error><SAP:Category>XIAdapterFramework</SAP:Category><SAP:Code>MESSAGE.GENERAL</SAP:Code><SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Connection refused: connect</SAP:AdditionalText></SAP:Error>
Could any one help me out.
Thanks & Regards,
Gangadhar.S

Hi Rao,
One of the solution could be restart your Java Engine in the Transaction "SMICM"...
And also test the host wether it is reachable or not in the transaction
SM49----->Ping--
>Additinal Parameters (give u r host name here and excute)
Hope this wil solve u r problem
Reward with points if helpful
Regards
Sai Ganesh

Reg:http adapter-sender side

which http client tool is used to send the request if we are using http adapter on sender side?

Hi Chandra,
HTTP: Hyper Text Transfer Protocol is a stateless prtocol to send a request and get a response back on that. For your query is there any specific client used?
Ans: No, you can use any client means the ip address of the system from which you are making request called client and to which you are making request called server. http is nothing but some set of rules to exchange data between two systems.
One more thing to mention is "some jave code is written for http and that is register on W3C" so that different server can connect to each other using it.
See the link below:
http://www.w3.org/Protocols/
Please always Rewards if helpful.
BR,
Alok
Edited by: Alok Sharma on Mar 18, 2008 12:49 PM

REG : HTTP Receiver Channel

Hi All,
I have a scenario where my sender is a SAP system and receiver is a HTTP url. I need to post IDOC from SAP system to the URL .No mapping is required, but i need to send a mail with the status of HTTP POST (e.g. 200 for success, 401 authorization error etc ) after every post i do on that URL .Is there any option present in XI where I can get HTTP STATUS code( ie 200,401 etc) from XI.
Thanks,
Siva

Hi Shabrish,
Is there any method by which i can access SXMB_MONI's "SOAP ENVELOPE XML" or the tables of SXMB_MONI.
Thanks in advance,
siva

REG : HTTP header fields (Synchronous response)

Hi All,
Can anyone please explain the advantage of using this function in the receiver HTTP adapter( ie
"Set adapter specific message attribute -> HTTP header fields (Synchronous response)")
and how this can be implemented?
Thanks in Adavnce,
Siva

>
sivarama krishna wrote:
> Hi All,
>
> Can anyone please explain the advantage of using this function in the receiver HTTP adapter( ie
> "Set adapter specific message attribute -> HTTP header fields (Synchronous response)")
> and how this can be implemented?
>
>
>
> Thanks in Adavnce,
> Siva
from help:
If you want to save HTTP header fields from the synchronous response in the XI message header, choose HTTP Header Fields (Synchronous Response) and enter the fields in the fields Field 1 to Field 6.
The fields must have the same names as the fields that are also to be sent in the HTTP response.
The technical names of the fields are HeaderFieldOne,...,HeaderFieldSix.
this means that in case you look to access the header of the response message of a sync http you can use this ASMA.
the implementation will be in your response mapping, using dynamic configuration - /people/shabarish.vijayakumar/blog/2009/03/26/dynamic-configuration-vs-variable-substitution--the-ultimate-battle-for-the-file-name

Reg: HTTP and RTMP when these are in Network Delays

Video streaming in HTTP and RTMP, which one performs better when delays are introduced. Streaming from one PC to other PC through LAN. Here i introdced delays in both HTTP and RTMP streaming. So, far i have seen RTMP is quite good in low delay variations such as -+10ms. Here Qn is which is better when high delays are introduced.
Thanks in Advance,
sree7k7

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Do you have any ad-blocking extensions or (security) software?

REG: HTTPS connection.

Hi all,
How is HTTPS connection done in SAP_XI?
Thanks,
Siva.

Hi,
check this links
Check this links
http://ask-leo.com/is_an_https_connection_really_all_that_safe.html
http://help.sap.com/saphelp_nw04s/helpdata/en/41/9cdb4064da712ae10000000a155106/frameset.htm
XI Runtime Cache issue \ Integration Directory HMI
RFC Destination
http://help.sap.com/saphelp_nw04/helpdata/en/96/709b3ad94e8a3de10000000a11402f/frameset.htm
regards
srinivas

Reg dou

hi
from help.sap.com i got this para REG : (http adapter) or (plain http adapter)
<i>The adapter at the inbound channel is located before the Integration Engine pipeline and calls this pipeline. The adapter at the outbound channel is called by the pipeline, and can therefore be regarded as part of the pipeline.</i>
please explain this para, i am confused,
generally outbound communication channel is before pipeline,
inbound communication channel is after the pipeline(according to my knowledge)
regards
sandeep.

Hello Sandeep,
you have some problem in terminology, a pipeline is a combination of a few steps (called pipeline elements) that together make up the pieplie.
there are diffrent pipeline for inbound and outbound processing.
you can actually see the pieplines in SXMB_ADMIN (under pipeline elemnts) and when you will see that it will be alot clearer
it is one of the chapter in TBIT51 or TBIT 40.
Uri Lifshitz,
SAP Technical Services Manager,
www.Xact.co.il

Mountain Lion and Zenworks

Regards!
I'm trying to install and configure Novell Zenworks 11.2.1 on a Mountain Lion 10.8.1.
We installed Zenworks 11.2.1, but the problem is when we try to register the machine (zac reg http://zenworks_zerver/)
Device os target not supported
I heard Novell is going to release 11.2.2 zenworks client soon, do you know if is going to support Mountain Lion on this version?
When will it be released?
Is there any work around to this version problem?

Polo,
We hope to have support in 11.2.2 - meanwhile, for testing purposes, we
have "experimental" support - a patch for this is available at
http://download.novell.com/patch/finder/ - look under "ZENworks"
Shaun Pond

IE New version problem

Hi all.
I have installed the last windows sp and it updates the IE from version 6 to 7 (or something like that) and when i try to execute a webdynpro app the browser gives me the following error:
'Sorry your browser/program is not supported by WebDynpro'
What happends? what can i do?
Best Regards.
Gregory.

Hi
It is possible to use this tool:
<a href="http://http://www.fiddlertool.com/dl/IE6SP2.reg">http://www.fiddlertool.com/dl/IE6SP2.reg</a>
This will make Internet Explorer 7.0 appear as if it is Internet Explorer 6.0 SP2 (the link can be found on the Internet Explorer 7.0 support page)
Then webdynpro works with no problems. (At least none I have found so far)
Peter
Message was edited by: Peter Kreiner

Icons missing on Zenworks applications window.

I have a few users that when they login their window is blank... I can either click on view then refresh or the F5 key in the window and the icons show up instantly.
I am on 11.2.4..

Originally Posted by FBTDUNCAN
I will try that...
sometimes they lose them after a refresh as well..
they will have the window up and then a phone call to me saying all the icons are gone except one
Another possibility is a corrupt ZENworks cache.
Try doing a "zac cc" from the command prompt, then refreshing the agent a couple times.
Another possibility is that the workstation has lost contact with the zone - if clearing the cache doesn't work, try a "zac unr" to un-register, then a "zac reg http://yourserver" to re-register.

ZCM 10.3.3 - cannot register new installations

This is a problem that recently has reared its ugly head. Installing ZCM 10.3.3 agent on XP Pro SP3 workstations appears to work; however, the workstations do not register with the ZCM server. Newly imaged workstations (with ZCM 10.3.3 installed some time ago) register automatically. Taking a known-good machine, I can "zac unr" and "zac reg ..." with success. Yet, installing ZCM today on a fresh computer, I can't register the workstation.
I cannot think of what changed or exactly when this week this problem started. The machines that had ZCM 10.3.3 installed prior to this problem starting are behaving properly. I can unregister and reregister without failure.
"zac cc" followed by "zac reg https://zcm.domain.tld" returns the following error:Unable to register with the server at: https://zcm.domain.tld.
Service Error. code: -21, message: Could not determine device type from <OS> tag: unsupported
The log file includes the following, which makes me think the pre-agent installer didn't install the sqlite stack:[DEBUG] [07/28/2011 14:35:41.968] [1912] [ZenworksWindowsService] [19] [] [ZenCache] [] [Exception getting object record for key ZoneConfig:Realms
Type: System.DllNotFoundException
Message: Unable to load DLL 'sqlite3': The referenced assembly is not installed on your system. (Exception from HRESULT: 0x800736B3)
Stack Trace:
at Novell.Zenworks.Cache.Sqlite.Sqlite.sqlite3_open(S tring dbname, IntPtr& handle)
at Novell.Zenworks.Cache.Sqlite.SqliteConnection.Open ()
at Novell.Zenworks.Cache.SqliteEntryInfoProvider.GetO bjectEntry(String key, UserContext owner)
Any ideas on what I should do?
Thanks,
Eric

Originally Posted by epoe
This problem has been resolved.
I had some funky files in the Windows Side-by-side folder that were artifacts of a previous wonky install of a different application. I had experienced issues with these specific files before that were resolved by removing them; they just weren't removed from these images that I was doing the upgrade from Zen 7 to ZCM 10.
After removing these two files, ZCM was able to be registered without error.
For the morbidly curious, the two files I removed are:
c:\windows\WinSxS\Manifests\x86_Microsoft.VC90.CRT _1fc8b3b9a1e18e3b_9.0.30729.1_x-ww_6f74963e.manifest
c:\windows\WinSxS\Policies\x86_policy.9.0.Microsof t.VC90.CRT_1fc8b3b9a1e18e3b_x-ww_b7353f75\9.0.30729.1.policy
I have to ask, how did you figure out that those files were related to a previous zenworks install? I had the same issue, but didn't have the same files. They were close in name, but then I was installing 10.3.4, not 10.3.3. I removed the two files, the manifest had a different number at the end, but the policy file was the same name. Thank you so much for that tip, it saved me a few hours of head scratching and saved the customer from a re-image.

Error 104 unsupported network device!!!!!!

I've bought a new wireles mini pci network card.
I put it in my laptpop and all i get is error 104 unsupported network card detected.
Help!!!!!!

Hi:
if you did not purchase a supported wireless adapter that is listed in your notebook's service manual with the HP part number on it that is why you got the error.
HP locks out of the BIOS any wireless cards that are not listed in the service manual.
This method is how HP has chosen to comply with wireless communications regulations regarding SAR and interference. Cards and notebook antenna systems have to be tested and validated to work within certain measurements.
More information regarding this can be found in this document below:
While this specifically deals with US regulations, other countries also have similar regulations, I'm sure.
Since HP is a US based company, it complies with US regs.
http://fjallfoss.fcc.gov/kdb/GetAttachment.html?id=22884
There is nothing you can do except to remove the card.
Paul

Reg.HTTPs

Similar Messages

Maybe you are looking for