Regarding the screen problem in 'back' command

Hi Experts,
I am doing project on data scrambling an using the ldb PNP . currently i am facing one problem regarding the' BACK'.
i am calling one screen program in main program. when i am clicking on back button from screen program ,the control flow back to the main program and the rest of the lines of the main program gets executed.
i want the control must go back to the default selection screen.
i have tried using leave to screen 0,leave program and exit.But these command are not working as per the requirement.
thanks in advance.

Hai,
       Please check the fct code for BACK button. if the fctcode is exist then use the following code.
        if sy-ucomm = 'BACK'.       " USE CAPITAL LETTERS ONLY
             LEAVE TO SCREEN 0.

Similar Messages

Regarding the screens (just got back from Apple Store)

So I made an appointment with the iPod Genius today here in Los Angeles (Canoga Park store to be exact) and I was told that all hardware issues will be covered for a year. Should Apple recognize the problem, they will gladly switch them out within 1 year of the purchase date. He says there is no guarantee that this is a defect that will be fixed. So if you can live with it for now, my advice is to enjoy it and in the meantime, let's be vocal about the issue to the point where Apple will make the change within the year and swap them out.

So I made an appointment with the iPod Genius today here in Los Angeles (Canoga Park store to be exact) and I was told that all hardware issues will be covered for a year. Should Apple recognize the problem, they will gladly switch them out within 1 year of the purchase date. He says there is no guarantee that this is a defect that will be fixed. So if you can live with it for now, my advice is to enjoy it and in the meantime, let's be vocal about the issue to the point where Apple will make the change within the year and swap them out.

Case: When trying t work in a second desktop, a program cannot be used if open in the first desktop. The screen just moves back to the first deskt

When I try to work in a second desktop, a program cannot be used if already open in the first desktop. The screen just moves back to the first desktop. Anybody else have this issue?

Whether or not this behavior occurs depends upon various preference settings and upon how you try to access the application in question. Personally, I like to organize my desktops according to project, so I regularly have windows from the same application spread out over several desktops. No problem.
For example, I have a Safari window in Desktop 1 and I want a Safari window in desktop 2. If, while in desktop 2, I bring Safari to the front by clicking on the Dock icon, I can open a new window in the usual ways. I could also just control-click on the Safari icon in the dock to get a new window in desktop 2.
(The only application that is a little weird in this regard is Finder. You have to do the control-click on it or it will always switch to a space with a window open.)
To make all this occur, I have Safari assigned to no desktops (control-click on Safari icon, then on Options) and in Mission Control preferences (in System Preferences) I have "When switching to an application..." UNchecked.
(Note that, with these settings, if an application is already in front and you click on its icon - or click twice on the icon if the applcation is not in front - the OS will assume you are looking for another open window and will switch spaces to give you one.)
Hope this helps.
charlie

Question regarding the "mcxquery" and "dscl -mcxread" commands:

Question regarding the mcxquery and dscl -mcxread commands:
Does anyone know why the mcxquery and the dscl . -mcxread commands don't show any info about MCX managed login items & printers? The System Profiler's "Managed Client" section does. Id like to see info regarding managed printers and managed login items using the mcx tools. I have Mac users running 10.5.2 with both login items and printers that are pushed out to them via MCX. The System Profiler app shows all of their policies, but the dscl . -mcxread and mcxquery tools dont. Why not?
-D
Message was edited by: Daniel Stranathan
null

How do you "call procedures/functions" without sql code? You need at least the call statement like
{call myProc(?,?,?)}that you wrap into a CallableStatement.
Other than that: when you switch off autocommit, you need to call commit/rollback at the end. Usually, if you don't commit/rollback a non-autocommitted connection, the transaction get's committed/rollbacked when you close the connection - that depends on the JDBC driver. But it's never a good idea to ommit the commit/rollback calls on a non-autocommit connection. Usually you enclose your code in a try/catch block like this:
con.setAutocommit(false);
try {
   con.commit();
} catch (Exception e) {
   con.rollback();
} finally {
    con.setAutocommit(true); //or:
    con.close();
}

The touchpad on my Macbook has become irresponsive. It works sometimes but normally remain insensitive. Sometimes the screen goes to back and forth by itself as I am dragging it using the touchpad.

The touchpad on my Macbook has become irresponsive. It works sometimes but normally remain insensitive. Sometimes the screen goes to back and forth by itself as I am dragging it using the touchpad.

The touchpad on my Macbook has become irresponsive. It works sometimes but normally remain insensitive. Sometimes the screen goes to back and forth by itself as I am dragging it using the touchpad.

The screen problems or osx ? for effect

Do not know if you know what. About the screen problems.
The display screen of the image.
Figure 1 in the Screen shot.
01
http://www.uppic.net/ts/screenshot20100517at6.19.37pm.png
Figure 2 and 3 using photography.
02
http://img517.imageshack.us/img517/6340/32773728.jpg
03
http://img341.imageshack.us/img341/3923/77370309.jpg
Experimented with every model (in istudio thailand) and have the same

You may have a graphics card problem. Hardware issue. Check the experts in the iMac forums:
http://discussions.apple.com/category.jspa?categoryID=132 or if this is MacBook pro related (you don't say) then here:
http://discussions.apple.com/category.jspa?categoryID=190

Hi i'm trying to backup my iphone 4s and usually can but when i go into itumnes now and select device. it dissapears and does notjing? it doesn't give me the screen to select 'back up'. Please help

hi i'm trying to backup my iphone 4s and usually can but when i go into itumnes now and select device. it dissapears and does notjing? it doesn't give me the screen to select 'back up'. Please help

Hey there MissVs,
It sounds like you are clicking your device in iTunes but it is disappearing and preventing you from backing up your decive. I would recommend the troubleshooting in the following article to help troubleshoot the issue named:
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
You can also backup your iPhone from the File menu:
Make sure your computer has the latest version of iTunes.
Connect your iOS device to your computer.
Choose File > Devices > Back up.
If you're using iTunes 10.7 or earlier, right-click the device from the list and choose Backup Now.
From: iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
Thank you for using Apple Support Communities.
Take care,
Sterling

HT201412 im tryin to play my music, wen selecting the screen keeps jumpimng back to playlist so im unablle to play

when in playlist my phone doesnt allow me to play the music, when i select the music the screen just flicks back to playlist screen ???????

when in playlist my phone doesnt allow me to play the music, when i select the music the screen just flicks back to playlist screen ???????

Regarding the screen

hi,
how to increase the size of the screen horizontally and vertically while creating the screen.

Hi,
For report program you can use the skip command in ABAP code to increase the length vertically..
For module pool you can use the screen painter..
regards,
mahantesh

IOS 8.3 and the auto rotation of the screen problem?

I upgraded to IOS 8.3 and the auto rotation of the screen has stopped working on my iPad Air 2, has anyone else got this problem?

By Control Centre I meant swipe up from the bottom of the screen to bring up Control Centre. In there you will find the rotation lock symbol (a padlock with a circular arrow round it). Make sure that is turned OFF

Complaint regarding the Audio problem in handset

Dear Sir / Madam
I am having BlackBerry 8520 Curve and purchased it on May'10. After buying this BB handset I am facing the problem in audio and not able to listen the voice clearly. I had submitted my handset for 4th time at Redington India Limited Ahmedabad for the same issue, but the problem is yet not rectified.
I have submitted my handset again at Redington on 26th July 2012 and they have given me the estimate of Rs. 4200 to change the housing of the handset. Before that I have given my handset at Redington for the same audio problem on 14th Mar 2012, 16th Jan 2011 & also give while the handset was in warranty period, but the problem is still same.
Now my question is that, I have give mobile 4 times for same issue and still I am facing same problem than why should I pay for housing, as it is manufacturing fault of handset. Still my mobile is at Redington and I want the permanent resolution for the audio problem, and if you are not able to solve the problem than please keep the handset with you, as I don't want the defective handset.
I have purchased the Blackberry as it is the brand name and for the service but I am really disappointed by such kind of worst service.
Name: Nilesh
Contact No: ***
Work Order No: ***
Case ID: ***
Model: Blackberry Curve 8520
IMEI No: ***
Pin No: ***
Given at Redington on: 26th Jul 2012.
Please find the above details of handset and contact no, and I expect the positive response from your side. If the problem will not get rectified I will have to go for the legal action against the Blackberry and will also mention this issue on Facebook so another people also come to know about the services of Blackberry.
With Regards
Nilesh
Removed personal information to comply with Community Guidelines and Terms and Conditions of Use.

Hi and Welcome to the Community!
As a user-to-user community, no one here can answer your question with any level of authority whatsoever; this site is not a channel for any formal communications with RIM. Further, RIM provides zero front line support to end users, including warranty...all support starts with the carriers, authorized resellers, and authorized service centers, all who can escalate cases into RIM at no charge to the end user.
So, your escalation path is not here, in these forums. Rather, it is through the places you already are working with...even if they may have a poor reputation. You have no free path by which to bypass them.
There is something called incident support, but it costs to just ask the initial question, since you are bypassing the contract you signed upon purchase. If you wish to investigate that, you can review it here:
http://us.blackberry.com/support/programs/technical/incident.html
There also might be some good reading here:
http://us.blackberry.com/legal/handheld-limited-warranty.html
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Macbook + 20" ACD mouse jumping all over the screen problem

hi all,
in need of help , my ACD plugged into my Macbook make's the mouse jump around the screen, unplugged no problems.
tried with trackpad and external mouse still the same
macbook 1.83/2gb ram - 10.5.1
Help !

Buy a Logitech Bluetooth mouse!! I have had no problems with my Logitech...it seems like more people have problems with the mighty mouse and magic mouse. That is my opinion. I have this mouse:
http://store.apple.com/us/product/TQ089LL/A?fnode=MTY1NDA1Mg&mco=MTA4MzgwNzg

Regarding the wireless problem of my T60. Hope there is someone who can help me out. Thx.

I have read some of the posts and i found out that some of the Thinkpad users have the problem of unable to connect wireless network using Access Connection but not Window wireless network connection. For my case, i have connect the network with both of them. In fact, when i use either one to connect, the other would be connected too.
The problem is, sometimes when i use my wireless network, my wireless would be switched off automatically, and the wireless light is then off, and after that i cannot switched the wireless on again. I tried on it using access connection, failed. I tried Fn+F5 to on it, but no matter how many times i click on 'on', there would not be any response. The only thing i can do after this is to restart to laptop.
I called Lenovo Support to help me solve the problem, but still failed. The first time they asked me to installed some drivers and reinstall my Intel(R) Pro/Wireless 3945ABG Network Connection. These files included 79uj29us which is a bios update, 7kwc50ww which is the wireless driver installation, 7tvu12ww which is the hotkey driver update, and last 7tku03ww, a power management driver update. But the problem remains. The 2nd time i called, they asked me to uninstall my Access Connection and use window wireless connection as they may cause conflict to each other, and they asked me to uncheck the option of 'Allow this computer to turn off this device to save power' in the power management of wireless drive in device manager, but problem persists. The last time i called the technician and he said they only can check if it is a hardware problem and there most probably be nothing else they can do for my softwares and drivers, and he also believed that it might be the network configuration of my service provider that cause the problem, but i personally do not think so as it is quite hard to believe that the my service is switching off my wireless hardware and i have other laptop in my house too but they do not experience this problem.
Last night i discovered something new, when the wireless is off automatically again, i ran a test on the the wireless device using PC Doctor, for PCI express status test, it passed, for the wireless connectivity and signal strength test, results showed there was 'no connection', when it comes to network link test, it showed 'internal error', the TCP/IP network connection test showed failed. Then i restarted it and ran the test with the wireless switched off by my self, the PCI express status test passed too, but the remaining four test all showed 'no connection'.
I really hope if there is someone there to help me out to solve the problem or to enlighten me what the real problem is, could it be software or hardware problem, or could it be other problems like registry or what? I greatly appreciate if anyone can help me to solve this. Thanks alot.
Message Edited by cat_felix on 06-13-2008 09:54 PM
Message Edited by cat_felix on 06-13-2008 09:55 PM
Message Edited by cat_felix on 06-14-2008 04:15 AM

I have uninstalled my Access Connection, but this problem seems to persist. IBM technician have changed the wireless card of my T60, the first few days after it was changed was very fine, no problem at all. About a week later, the problem occured again, and it happened quite frequently after that occurence. Now i really have no idea what is the cause and how to solve it. Will be greatful if there is anyone that can help me.

Need clarification regarding the test cable-diagnostics tdr command

Hello,
I've read about the test cable-diagnostics tdr command but I need clarification on the examples listed below to make sure that I am providing the right answer to my co-workers.
Example 1:
CXXX7SW17#show cable-diagnostic tdr int g0/20
TDR test last run on: July 16 10:23:00
Interface Speed Local pair Pair length        Remote pair Pair status
Gi0/20    auto Pair A     N/A                        N/A                Normal
                       Pair B     72   +/- 10 meters N/A                Open
                       Pair C     75   +/- 10 meters N/A                Short/Crosstalk
                       Pair D     74   +/- 10 meters N/A                Short/Crosstalk
Does this example mean that there's a cable length issue in the line which is causing the device that it's connected to not to work properly?
Example 2:
CXXX2SW140#show cable-diagnostics tdr int g0/21
TDR test last run on: July 16 09:16:22
Interface Speed Local pair Pair length        Remote pair Pair status
Gi0/21    100M Pair A     N/A                      Pair A           Normal
                          Pair B     N/A                      Pair B           Normal
                          Pair C     N/A                     Pair C           Normal
                          Pair D     N/A                     Pair D           Normal
Does this example state that the cable line is okay for use?
Example 3:
CXXX1SW19#show cable-diagnostics tdr int g0/22
TDR test last run on: July 16 06:36:53
Interface Speed Local pair Pair length            Remote pair Pair status
Gi0/22   auto    Pair A       1    +/- 10 meters N/A               Open
                          Pair B     39   +/- 10 meters   N/A               Open
                          Pair C     72   +/- 10 meters   N/A               Open
                          Pair D     1    +/- 10 meters    N/A              Open
Does this example mean that there isn't a device connected on the other end? No pin-contact?
Thank you very much for any help you could provide.
S

I found this article here at supportforums that seemed like the best explanation I've read so far for TDR info.
Hope that helps.

Regarding slection-screen problem

Hi,
I have one requirement in selection-screen.if I enter the period from 04 to 03 with fiscal year from 2006 to 2007 as in put parameters in selection-screen, getting error message as 'From period is greater than To period'.
Can any body please respond to my question..
Regards,
Suresh Kumar.

Say you have the selection fields
SELECTION-SCREEN BEGIN OF BLOCK block
[WITH FRAME [TITLE title]]
[NO INTERVALS].
parameters: per1 fiscyr1 per2 fiscyr2
SELECTION-SCREEN END OF BLOCK block.
SELECTION-SCREEN END OF BLOCK block.
AT SELECTION SCREEN ON BLOCK block.
data: num1 type n, num2 type n.
CONCATENATE fiscyr1 per1 into num1.
CONCATENATE fiscyr1 per1 into num2.
if num1 > num2.
message: from period greater than to period
endif.

Regarding the screen problem in 'back' command

Similar Messages

Maybe you are looking for