Relating DPS and DS logs

is there anything common between fwd.log and access.log (other than the timestamp) to relate the log entries from the two files
Thanks

This feature will be available with Directory Server Enterprise Edition 6.0 version of Directory Server and Directory Proxy Server.
Regards,
Ludovic.

Similar Messages

Redo Log and Supplemental Logging related doubts

Hi Friends,
I am studying Supplemental logging in detail. Have read lots of articles and oracle documentation about it and redo logs. But couldnot found answers of some doubts..
Please help me clear it.
Scenario: we have one table with primary key. And we execute an update query on that table which is not using the primary key column in any clause..
Question: In this case, does the redo log entry generated for the changes done by update query contain the primary columns values..?
Question: If we have any table with primary key, do we need to enable the supplemental logging on primary columns of that table? If yes, in which circumstances, do we need to enable it?
Question: If we have to configure stream replication on that table(having primary key), why do we actually need to enable its supplemental logging ( I have read the documentation saying that stream requires some more information so.., but actually what information does it need. Again this question is highly related to the first question.)
Also please suggest any good article/site which provide inside details of redo log and supplemental logging, if you know.
Regards,
Dipali..

1) Assuming you are not updating the primary key column and supplemental logging is not enabled, Oracle doesn't need to log the primary key column to the redo log, just the ROWID.
2) Is rather hard to answer without being tautological. You need to enable supplemental logging if and only if you have some downstream use for additional columns in the redo logs. Streams, and those technologies built on top of Streams, are the most common reason for enabling supplemental logging.
3) If you execute an update statement like
UPDATE some_table
SET some_column = new_value
WHERE primary_key = some_key_value
AND <<other conditions as well>>and look at an update statement that LogMiner builds from the redo logs in the absence of supplemental logging, it would basically be something like
UPDATE some_table
SET some_column = new_value
WHERE rowid = rowid_of_the_row_you_updatedOracle doesn't need to replay the exact SQL statement you issued, (and thus it doesn't have to write the SQL statement to the redo log, it doesn't have to worry if the UPDATE takes a long time to run (otherwise, it would take as long to apply an archived log as it did to generate the log, which would be disasterous in a recovery situation), etc). It just needs to reconstruct the SQL statement from the information in redo, which is just the ROWID and the column(s) that changed.
If you try to run this statement on a different database (via Streams, for example) the ROWIDs on the destination database are likely totally different (since a ROWID is just a physical address of a row on disk). So adding supplemental logging tells Oracle to log the primary key column to redo and allows LogMiner/ Streams/ etc. to reconstruct the statement using the primary key values for the changed rows, which would be the same on both the source and destination databases.
Justin

On Adobe DPS and tracking.

Hello,
I am a completely new member to this community. Thank you in advance for all that may take a look at the following questions.
I am writing from the agency side of advertising. One of our clients use Adobe DPS, and our agency will soon be promoting the client's app to drive monthly subscriptions.
First question :
Once a mobile user is driven to download the app i.e. post-click through, is it possible to tie subscriptions back to the ad source through 3rd-party tracking implementation? I'm assuming the answer is no, but I would like to just double-check for reassurance.
Second question :
Once a user has accessed this digital-content through the app, is it possible for the client to get any visibility into the engagments that happen within the app?
I think it may be answered here : http://blogs.adobe.com/digitalpublishing/ <--
but I am getting different answers about this issue from different sources.
The second part to that question : if those engagement metrics are available to the client using Adobe DPS, can those measurements customized? i.e. - would I be able to track how many page views each unique user has logged? I did take a look at the MPA metrics standard but those only seem to be sending back session duration, count of sessions, etc.
Thank you again.
mike

Hi Mike,
Here are the responses to your questions:
1) First question: The answer is as you suspected, "No".
2) Second question:Once the user has downloaded/installed the app then you can access to baseline analytics reports for basic reporting. You can also get access to Sitecatalyst that provides more deeper tracking. If you are entitling the users directly via direct entitltment; then yes you can track more detailed behavior on each user.
Shikha

Transaction log and access log

The transaction log (TransactionLogFilePrefix) and the access log are stored
relative to the directory where the server is started rather than where it
resides as with the rest of the log files. Why is this?
Eg.
I start the server with a batch file contained in
projects\bat
My server is in
projects\server\config\myDomain
When I start the server the access and transaction logs end up in
projects\bat
while all the rest of the log files (such as the domain and server log) end
up in
projects\server
My batch file that starts the server looks like this
"%JAVA_HOME%\bin\java" -hotspot -ms64m -mx64m -classpath %CLASSPATH%
"-Dbea.home=e:\bea"
"-Djava.security.policy==i:\projects\server\config\myDomain\weblogic.policy"
"-Dweblogic.Domain=myDomain" "-Dweblogic.Name=adminServer"
"-Dweblogic.RootDirectory=i:/projects/server"
"-Dweblogic.management.password=weblogic" weblogic.Server
Thanks for help on this,
Myles

The same case with me, I sent email to apple support, but got not reply.
The apple status page indicated that every thing is fine now, what a joke.
Many devs are in this situation too, I guess we could do nothing but waiting for their system to come up.

Errors in alert log and listener log and "alter database mount exclusive"

Hello!
I need a help.
Database 11R2 works under MS Windows Server.
Whwn I start it using Services, according alert log it is started by command "alter database mount exclusive".
Next - alter database open.
After this, it seams that program, which should put data into database, can not work with it, because I see errors in alert log: ora-12537, 12560, 12535, 12570, 12547.
What does itmean and what to do?
This is extract from alert_log
ORACLE_BASE from environment = C:\Oracle
Mon Feb 04 14:54:53 2013
alter database mount exclusive
Successful mount of redo thread 1, with mount id 1458539517
Database mounted in Exclusive Mode
Lost write protection disabled
Completed: alter database mount exclusive
alter database open
Thread 1 opened at log sequence 3105
Current log# 3 seq# 3105 mem# 0: C:\ORACLE\ORADATA\xxx\REDO03.LOG
Successful open of redo thread 1
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
SMON: enabling cache recovery
Successfully onlined Undo Tablespace 2.
Verifying file header compatibility for 11g tablespace encryption..
Verifying 11g file header compatibility for tablespace encryption completed
SMON: enabling tx recovery
Database Characterset is AL32UTF8
No Resource Manager plan active
Mon Feb 04 14:55:04 2013
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
Mon Feb 04 14:55:06 2013
QMNC started with pid=20, OS id=2860
Completed: alter database open
Mon Feb 04 14:55:11 2013
Starting background process CJQ0
Mon Feb 04 14:55:11 2013
CJQ0 started with pid=25, OS id=2000
Mon Feb 04 14:55:11 2013
db_recovery_file_dest_size of 4977 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Mon Feb 04 15:00:29 2013
Starting background process SMCO
Mon Feb 04 15:00:29 2013
SMCO started with pid=32, OS id=3212
Edited by: kogotok1 on Feb 4, 2013 4:54 PM

Thank you.
But in the same time - when I see in alert log those error messages ora -12560, 12537,12535,12570 and so on - clients programs, whiie try to connect, hang up.
For sql plus takes 20 minutes to connect.
lsnrctl status gives the following
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 04-FEB-2013 16:01
:46
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=xxx-BD.mosxxx
.elektra.net)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 01-FEB-2013 10:22:48
Uptime 3 days 5 hr. 39 min. 54 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\Oracle\listener.ora
Listener Log File c:\oracle\diag\tnslsnr\xxx-BD\listener\alert\l
og.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=xxx-BD.mosxxx.elektra.net)
(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XXX" has 2 instance(s).
Instance "XXX", status UNKNOWN, has 1 handler(s) for this service...
Instance "xxx", status READY, has 1 handler(s) for this service...
Service "XXXDB" has 1 instance(s).
Instance "xxx", status READY, has 1 handler(s) for this service...
The command completed successfully
To tell the truth I am confuse - I thought I have only 1 service "XXXDB" and 1 instance - "xxx".
May be I have wrong entries in tnslsnr.ora?

Aperture 3 and GPS logs

According to the manual, Aperture 3 can place photos on a map based on camera GPS data, or else manually by clicking on a map.
I have a camera that doesn't support GPS and was hoping I could find a solution where Aperture can add GPS EXIF data based on importing from a GPS log (from a dedicated GPS device) and comparing timestamps.
Do any such plugins exist for Aperture 3?
(BTW, I've read people's iPhone-related solutions, and that is not going to work for me since I will be roaming in places where the iPhone's accuracy will be called into question...not to mention I'd have to remember to snap an iPhone photo at every waypoint along the way.)

1. GPS Track file: I use "GPS Tracker" (free, app store) on my iPhone to store the GPS track logs on instamapper.com (free). Define the trip and download the track file (in .gpx format).
2. I took about 200 pictures over 3 days on my Nikon D100 onto a CF card.
3. I opened Aperture 3 and imported the images into a new project. I clicked on (Places) button. Used the [GPS] drop down and selected "Import GPS track" (this drew the track nicely!). Selected all images. And dragged the selected images to the track. Aperture asked to assign locations based on time. I selected (Assign Locations). None of the images were assigned the correct locations I removed the images from Aperture.
Marc Vose wrote:
Just wondering which program you're using to actually bring the images off the camera in this scenario.
4. I placed the CF card into the usb CF reader and copied the images to a folder using the finder.
5. I installed exiftool (link: http://www.sno.phy.queensu.ca/~phil/exiftool/) and issued the terminal command:
$ exiftool -geotag=/Users/kent/Downloads/Vacation-2010-02-AZ.gpx .
This tagged all the images in the directory using the track file Vacation-2010-02-AZ.gpx
6. I imported the images into Aperture, clicked on the [Places] button. And all the images have been correctly placed.
7. I burn the raw images to dvd before formatting the CF card (send off-site for backup .
The GPS track support still needs some work in Aperture - but is it nice to be able to work with location information on the images.

[svn:bz-trunk] 14330: BLZ-476 : Getting different error message in server' s servlet log and console log when class is not of expected type.

Revision: 14330
Revision: 14330
Author:   [email protected]
Date:     2010-02-22 10:03:03 -0800 (Mon, 22 Feb 2010)
Log Message:
BLZ-476 : Getting different error message in server's servlet log and console log when class is not of expected type.
QA: no
Doc: no
checkin test : pass
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-476
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/MessageBrokerServlet.java

Hi, wbracken ,
As known, there are 2 different questions I raised.
Regarding the reply for the second one (Nothing to do with Chinese), I noticed there are several similar issues found in this forum, and it seems no response could solve my that problem. The related methods and classes were also well check, as well as the parameters put.
Any way, your reponse was appreciated.
Thank you for the help.

[svn:bz-trunk] 14341: BLZ-476 : Getting different error message in server' s servlet log and console log when class is not of expected type.

Revision: 14341
Revision: 14341
Author:   [email protected]
Date:     2010-02-22 13:19:46 -0800 (Mon, 22 Feb 2010)
Log Message:
BLZ-476 : Getting different error message in server's servlet log and console log when class is not of expected type.
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-476
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/MessageBrokerServlet.java
    blazeds/trunk/modules/core/src/flex/messaging/util/ClassUtil.java

Hi, wbracken ,
As known, there are 2 different questions I raised.
Regarding the reply for the second one (Nothing to do with Chinese), I noticed there are several similar issues found in this forum, and it seems no response could solve my that problem. The related methods and classes were also well check, as well as the parameters put.
Any way, your reponse was appreciated.
Thank you for the help.

HRP1000 and HRP1001 log changes

hi I am not able to see HRP1000 and HRP1001 log changes in CDHDR and CDPOS. The HR_IT1000 and HR_IT1001 are active in the system.

Hi,
the change documents can be activated after implementation of note 979104 and setting the related switch as described.
Best regards,
Malgorzata Herzog

What are these EM-related accounts and how do I unlock them?

Hi,
I created a database manually so it can not be managed through Enterprise Manager yet. When I run the database configuration assistant to configure it with Enterprise Manager, in the alert log file, i get the error message:
oracle.sysman.emcp.exception.EMConfigException: Failed to unlock all EM-related accounts
What are these EM-related accounts and how do I unlock them?
Thanks, hope somebody tries to help me. Any leads will be appreciated.

alter user dbsnmp unlock;
It gets locked by some Critical Patch Updates.
You can also configure em/dbconsole with emca.

I am running safari 7.0.6 with IOS 10.9.4. after the mac has been asleep and I log on I cannot open safari as it appears to have crashed. the workaround to this is to reboot the IOS and log back in after which safari will open.

I am running safari 7.0.6 with IOS 10.9.4. after the mac has been asleep and I log on I cannot open safari as it appears to have crashed. the workaround to this is to reboot the IOS and log back in after which safari will open. Any ideas on how to resolve this?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

IPhone 5 / diagnostics and usage log full of entries / is my phone ok!?

Good morning!
I've a question regarding the "diagnostics and usage" log entries on my new iPhone 5.
Once an Apple employee told me that the folder should be as empty as possible. That is a good sign and means that your phone is ok.
Now I checked my diagnostics and usage folder and found the following:
awdd_2012-10-... entries (9)
log-aggregated-2012-... entries (7)
MobileSMS_2012 (1)
Siri-2012-... entries (8)
stacks-2012... entries (>10)
Can anybody help me with these entries and logs? What do they mean? Do I have a hardware or software problem or is it ok?
I'm looking forward to your help!
Best regards
Jan

Entries in this section are normal and you should not worry about them. Usually there are entries related to when an unexpectedly quits or the memory runs low, etc.
Nothing to worry about. Remember to restart your phone every now an then as a good healthy step to keeping your phone working well! :-)

I have locked my ipad and cannot log on to the PC it was registered on. I've logged on the itunes account on another computer but i cannot unlock

Help!
I have locked my ipad and cannot log on to the PC it was registered on. I've logged on the itunes account on another computer but i cannot unlock, can someone help me?

Hi Firenzeb,
I'm sorry to hear you are having this issue with your iOS devices. Based on your description of the issue and the time you posted, this may have been related to a service interruption on the 11th, as noted here:
Apple - Support - System Status
If you continue to have issues accessing the iTunes Store, you may find the troubleshooting outlined in the following article helpful:
Can't connect to the iTunes Store - Apple Support
Regards,
- Brenden

DPS and PostgreSQL - problem with add/modify

Hi All,
Did anyone try to combine DPS and PostgreSQL database? I am trying to do this and everything works OK except add and modify operations from LDAP client.
E.g. When I try to modify entry I got following error:
[29/Jun/2009:15:27:20 +0200] - PROFILE - INFO - conn=19 assigned to connection handler cn=anonymous, cn=connection handlers, cn=config
[29/Jun/2009:15:27:20 +0200] - SERVER_OP - INFO - conn=19 op=0 MODIFY dn="uid=6886,dc=example,dc=com" jdbcServer=test-jsource sqlStatement="UPDATE persons SET persons.name='Yoko1' WHERE persons.id = 6886"
[29/Jun/2009:15:27:20 +0200] - SERVER_OP - INFO - conn=19 op=0 MODIFY RESPONSE err=1 msg="java.lang.Exception: org.postgresql.util.PSQLException: ERROR: column "persons" of relation "persons" does not exist" jdbcServer=test-jsource
[29/Jun/2009:15:27:20 +0200] - OPERATION - INFO - conn=19 op=0 MODIFY RESPONSE err=1 msg="java.lang.Exception: org.postgresql.util.PSQLException: ERROR: column "persons" of relation "persons" does not exist" etime=0
The exception comes from Postgresql database, because it doesn't accept including table's name in the specification of a target column. For example (from Postgresql documentation): UPDATE tab SET tab.col = 1 is invalid, should be UPDATE tab set col =1.
Is there a way to workaround this somehow?
I use DPS 6.3 and Postgres DB 8.3.7.
Thanks,
Greg

FYI, the list of RDBMS tested with DPS is available at [http://docs.sun.com/app/docs/doc/820-2759/additional-software?l=en&a=view&q=mySQL|http://docs.sun.com/app/docs/doc/820-2759/additional-software?l=en&a=view&q=mySQL]

CAD Real Time Stats show NA for agent state and call log

Hello
For our lab uccx, the agent/users CAD display shows NA for the agent state and call log. I have
Not Ready and Log out codes set and have the testers do those actions to generate data.
I have rebooted the server and have also checked the services page and confirmed
all the services are running.
I went through the admin guide to see if I missed any configuration but does not appear so.
I tried launching the real time stats tool from the UCCX Admin and it launches OK
but I noticed that it shows not connected.
Note this is over a VPN to the UCCX.
So not sure if this is related. I checked the relase notes and this is the base install
of UCCX 8.5. I am going to install the service updates but wanted to see if I can
get this running before I schedule a maint window to do the upgrades.
Thanks
Mike Kana

Hi
you might be facing an issue where " uccxcaduser password" gets corrupted , which leads to the issue you are facing right now
you have to contact TAC to reset that password for you and your issue will be fixed ,100%
Note : Only TAC can reset this password

Relating DPS and DS logs

Similar Messages

Maybe you are looking for