Remote Lock functions on E72

Hi all,
The remote lock function does not work on my nokia E72 after the last  2 updates.I was hoping that the last one would resolve it but still not working. is anyone facing the same problem?

I faced the same problem on E72, even with the N8 still not working..someone?

Similar Messages

  • Problem using E61 Remote Lock Function

    Hi All,
    When I try to set the Remote lock passphrase, e61 asks for lockcode (12345 by default), once I entered an error message pops up... Unfortunately the pop-up message got covered up by another one but in the split second I think it says "...wrong...5 times..." So I try to reset the default 12345 lockcode but receive "General: system error"
    Is there a backdoor to reset the 12345 lockcode?
    I've also set a password for Mem card but makes no difference.. (According to Forum at My-Symbian you need to set a password or lockcode on both mem card and phone to enable this remote lock function.)
    Any suggestions?
    Thx

    my 6280 it need registration code or online unlocking

  • I have remote locked my mac using find my iPhone app via my iPad - I am unable to enter the unlock code as the mac keyboard won't pair with the mac - I guess that will teach me for playing...any ideas?

    I have remote locked my mac using find my iPhone app via my iPad - I am unable to enter the unlock code as the mac keyboard won't pair with the mac - I guess that will teach me for playing...any ideas?

    Thought so - ace - find my phone really needs an unlock function. - another £40...

  • Can a thief use iTunes to restore/wipe my phone even though it has been remotely locked?

    My iPhone 3GS was stolen last week and I used Find My iPhone to track it. I also successfully remotely locked it. I did not use the wipe function in the hopes that I might get it back. What I 'd like to know is if a thief can use iTunes to wipe the phone even though it's remotely locked? If so, how do they get around the lock?

    If they connect the phone to a computer, they can restore it as new through iTunes. This will wipe everything that is on the phone. The remote lock is to protect your data, not to prevent the phone from ever being used again.

  • MOP RC (Maintenance Operation Protocol -Remote Console) function enabled

    So I just had a white hat security finding on my external router. I appeared to be low in the findings and I am unsure if this protocol is even used any more. My router is a Cisco 3825 running IOS 12.3(11r)T2. This is what they reported:
    One or more Cisco routers have the MOP RC (Maintenance Operation Protocol -Remote Console) function enabled, which is a poor security practice. MOP enables personnel on the local network, or a remote network that is bridged to the local network, to obtain access to a remote console on the router if they possess credentials for the device. This is significant because access to router management is usually protected by IP-based ACLs. As a Layer 2 protocol, MOP allows for the circumvention of this type of ACL, making brute force login attempts possible if account lockout is not enabled. If account lockout is enabled, such attempts could result in a denial of service due to user accounts being locked out.
    I fixing this as easy as just running the no mop enabled command in the interface like this article suggests?  http://blogs.cisco.com/security/router_spring_cleaning_-_no_mop_required/

    ya it was a great easy to read article on a feature you should turn off. Still I wonder how many master hackers try to hack that. DECnet who knew right
    Do you apply no mop enable the interface or the subinterface??  Also I should only need to apply it to the interface facing the "internet" right?

  • I lost my iphone4 yesterday..i have find my iphone apps in there and its updated to IOS 5. i wonder if they would be able to still access my accounts in there after i remote locked it.? its offline whenever i checked till now..

    i lost my iphone4 yesterday..i have find my iphone apps in there and its updated to IOS 5. i wonder if they would be able to still access my accounts in there after i remote locked it.? its offline whenever i checked till now.. im wonderin if ist safe coz all my emails are there and all personal info..i hope someone could answer me..i reported to the police the ist step..coz when it happened ..policemen are there..then i went to the nearest MAC center and tried to track it..but its offline..so they asked me if i want to remote lock it..then i did...which i think the mcreason why i cant track my phone beacause its locked?? or not until they connect to wifi or 3g but its unabling them because i locked it..?

    but when i do remote wipe ..it will erase everything in there and i cant track down the phone anyomore?

  • HT1192 caps lock function does not work after latest update

    Hi there,
    I have a Macbook 13" Early 2011 and recently after updating my operating system to Mac OS X 10.7.4, i have found that the caps lock button isn't functioning.
    At present if i hold or press the button, it is failing to light up or function at all.
    Is there a fix for this issue, as i have read that there was an update by Apple to stop accidental pressing of this key, however not being able to access its function at all seems to be unusual.
    Your thoughts and opinions would be much appreciated,
    Thanks,
    Robsterhill101

    My Macbook Pro Early 2011 15"  (base model) did this to me last night.
    I did a PRAM Reset, the generic "Cure All Procedure" for Macs. It worked after, but I noticed that the button had to be pressed at just the right angle and with enough pressure. The light would come on and off and Caps Lock functions properly. Continued as normal.
    I put the computer to sleep by simply closing the lid, and then put myself to sleep as well.
    This morning, just before I came on here, my computer would NOT wake from sleep (a whole other issue). Would not wake up by pressing the power button. So I had to do a hard reset, hold the power button down, and press it again after...grrr I never feel good being forced to do this.
    Anyways long story a little bit shorter, I restarted my computer and low-and-behold the Cap Lock is not working again. No Bueno, Cupertino.
    No, sorry, no liquid damage on the keys, and I don't have kids, nor share my computer with anyone but myself.
    Its one of the few things that bug me about this computer. The other is the issue of the computer not being able to wake from sleep. Too often.
    SHOULDA BOUGHT THE APPLE CARE
    Simply Because, perfect timing after the years original warranty, you will experience problems. After all, they do want you to be a repeat customer. IYKWIM

  • I recently did the update and my text message notification was no longer working. Then I did a reset and now my locking function no longer works. What is going on???

    I recently did the update and my text message notification was no longer working. Then I did a reset and now my locking function no longer works. What is going on???

    What "locking function" are you talking about?

  • Remote lock & Memory card corrupted issue

    Remote lock & Memory card corrupted issue
    Hi Dear Friends,
    You might have experienced the "Memory card corrupted issue."
    Don't panic! The solution is here!
    Your memory card is just 'locked', it isn't 'corrupted'!
    For sure, this post would be of great help to you, if:
    • You have enabled the "Remote lock" feature of your Nokia device.
    • You have sent the remote lock message to your device and locked it remotely.
    Finding the solution really took me a lot of time. I was inspired by various posts on the Discussion, and decided to find the official notes on the issue. So would like to thank those who shared their tips, and helped us solve this problem.
    I'm using E66, (you might use something else), and would refer to E51's and E65's User guide so often.
    Of course, I'm not going to explain the instructions, and recommend you to refer to your user guides when needed.
    On the contrary, I'm going to explain what may not be mentioned in your user guides.
    Let’s Begin
    What Has Happened:
    In short, you attempted to test the feature, your phone was locked, you keyed in the lock code, code was accepted, you used the phone for a while, switched it off, powered it on, you were prompted the Lock code, you keyed in the lock code, code was accepted, you attempted to view some stuff that was on your memory card, you didn't find it, you tried to run a program that was installed on your memory card, the program icon didn't open, you put the memory card in the card reader and connected it to PC, it was not detected, you went to Menu> Tools> Memory card> You saw "Memory card corrupted"!
    Don't, don't select the Yes selection key if you got the caution message, "Memory Card corrupted, reformat it?" because your memory card isn't corrupted, it's simply being locked!
    But you can't find the unlock memory card command in Menu> Tools> Memory card> Options.
    So? What to DO?
    1. (This step is optional) Disable the Remote lock feature.
    (Refer to your user guides) and change Allow Remote Lock> to no.
    Then, while the unit is on,
    2. Press the power key briefly, and select Remove memory card.
    3. Remove the memory card from the slot.
    4. Press OK if prompted.
    5. Reinsert the memory card in the slot.
    6. Reopen Menu> Tools> Memory card.
    Is your memory card detected? If yes!
    7. Follow tips number 2 & 3 of What to Know section below.
    Did you get "Password removed" message?
    If no, be careful of the case of the first character.
    If you had changed the Remote lock message many times, use the one that was practically sent to the device via text message.
    . In case you had set a password on your memory card before, you may also attempt to unlock the locked memory using your own password, not the first eight characters of the remote lock message.
    Step seven would make the memory card detectable to the connected card reader to the PC too.
    8. The memory card is detected temporarily, but it is locked and the "memory card corrupted" issue reappears every time you switch off/on the phone, unless you successfully complete step seven.
    What to Know?
    Official User guide Tips:
    1. Remote locking also locks your memory card. (E51 page100)
    . Yes, the one mobile phone that sends your device the predefined remote locking message, receives the confirmation message in response, indicating, "Mobile telephone and memory card are locked". But it isn't written in E66's and E65's.
    2. To unlock the memory card, select Menu> Tools> Memory> Options> Remove password, and "enter the remote locking message as the password". (E51 page100)
    . Yes, quite clear, but the quoted part ("enter the remote locking message as the password") isn't written on my E66's User guide, and there's a vague precaution on E65's, (refer to number 4).
    3. If the message is longer than 8 characters, the first 8 characters are used as the memory card password. (E51 page100)
    . Yes, quite clear good E51, but I don't own you; I have E66 your little sister. I owe my memory card's survival to nice users on the Discussion.
    4. The maximum number of characters allowed is 8. Using more than 8 characters could prevent unlocking the memory card and require reformatting it. If reformatting the memory card is required, all information on the card will be lost. (E65 page28)
    . Quite interesting, but it contradicts what good E51 says in number three¡!
    . And it contradicts my own experience of the issue (and some other users' on the Discussion) too, since my E66's memory card accepted the 'first eight characters' of the 'ten-character long’ remote lock message that I had previously used to remote lock it.
    . The first three tips are quite important and shouldn't have been excluded from E66's and E65's user guides. I don't have the time to download and review all the user guides that support this feature, but at least I read some user manuals and also got the impression (from the posts on the discussion) that there had been not enough information on E66's, E65's, E71's, N96's, and some others.
    You may like to do a simple search on Google:
    "The first 8 characters are used as the memory card password" site:nokia.com
    Since the content of the user guides on the server seem not be searchable for any reason, you won't find any official support result except those of the good users on the Discussions. And the 'Nokia Site Search" brings no result too. (At least on the date of this post).
    ¡ Terribly sorry for those who have selected Yes to the Reformat caution message. It wasn't your fault. But there's an idiom that says, sleep on it! "Think about it for a while before coming up with a decision".
    But now that you have tested the feature and know its solution, don't be afraid, and enable the Remote lock feature again! God forbid, but it may be needed one day!
    Yours,
    http://nds1.nokia.com/phones/files/guides/Nokia_E51_UG_en.pdf
    http://nds1.nokia.com/phones/files/guides/Nokia_E65-1_UG_en.pdf
    http://nds1.nokia.com/phones/files/guides/Nokia_E66-1_UG_en.pdf

    Dear, I guess, / This article doesn't suit your case. / • You have not enabled the "Remote lock" feature of your Nokia device. / • You have not locked your device remotely. / Because you don't know where the remote lock is and haven't played with its settings. / You need to explain what has happened. / The only thing we get is that your memory card doesn't open. / 1. your phone model, e.g., 5130. / 2. What did you do recently that might have caused this issue? / 3. What methods did you try to unlock it? / Use some of the tips provided above. (except number 1). / Yours

  • Why iPad mini retina smart unlock/lock function not working when I using 3rd party cover with magnetic

    I recently bought a leather case from store with smArt unlock/lock function with magnetic. I try to use it on my iPad mini retina when I try to close and open it doesn't work. I already on my smart unlock function inside setting. May I know where is the magnetic area  of iPad mini retina ?

    The "Lock/Unlock" feature is enabled by installing a compatible Smart Cover/Case (or third-party equivalent) with an embedded magnet in the correct position in the cover. Are you using a real Apple product? If not, the cover/case you are using may not have the magnet in the right place or may not even have one at all.
    If you ARE using a real Apple Smart Cover/Case and you have an Apple Store nearby, have them check both the case and cover you are using. You may have a bad magnectic switch on the iPad or a faulty cover/case.
    I also remember reading here of a Smart Case/Cover which had the magnet installed upside-down and was repelling rather than attracting. You might want to take the cover off and flip it to verify this...you'll have to slide the cover around in different positions on the right-hand bezel on the iPad to see if you can activate the magnet.

  • Difference between BAPI and remote enabled function module

    Hi!
    what is the difference between remote enabled function module and
    BAPI.
    How do we use remote enabled function module .
    thanks
    Amit

    Please search the forum before asking basic questions.

  • Why do I get a blinking folder with a question mark after remote locking my Macbook?

    Hi,
    I wanted to try the remote lock feature of iCloud.
    I remotely locked my 17 inch Mid 2009 MacBook Pro. I received the confirmation email stating that the machine had indeed been locked.
    When I went to the machine to unlock it, I was surprised to see a grey screen with a blinking folder. I had expected to see a place for me to enter my PIN. Rebooting the machine revealed the folder again.
    What is going on? Did sometihng go wrong resulting in my somehow wiping my hard drive?
    Thanks in advance for any help on this.

    Here is the email:
    Doulos has been locked. 
    Doulos was locked at 4:40 PM on March 11, 2012 with the following message. 
    “Remote Locked!”
    If you retrieve your Mac, unlock it using the passcode you created to lock your Mac.
    iCloud Support  |  Terms of Service  |  Privacy Policy  

  • Message handling in remote enabled function module .

    Hello experts ,
    I am creating a remote enabled function module which must return a warning message based on certain condition . Inorder to meet the requirement  I have added this line in the Fm's source code :
    " Message Wxx(message class) with a ."
    But when I am trying to use it , the above given message is dispalyed as an error message . Could you please let me know where am I going wrong . TIA.
    Regards,
    Prakrita Kapoor.

    Hi Prakrita,
    Try building below code within the RFC after you have added return structure in your RFC parameters.
      IF sy-subrc NE 0.
        CLEAR message.
        message-msgty = 'E'.
        message-msgid = 'ZMI'.
        message-msgno = '001'.
        message-msgv1 =  ID.
      PERFORM return_message USING message
                                   CHANGING return.
      Endif.
      form return_message USING    VALUE(P_MESSAGE)   LIKE MESSAGE
                                   CHANGING P_RETURN  LIKE BAPIRETURN.
      CHECK NOT MESSAGE IS INITIAL.
      CALL FUNCTION 'BALW_BAPIRETURN_GET'
           EXPORTING
                TYPE       = P_MESSAGE-MSGTY
                CL         = P_MESSAGE-MSGID
                NUMBER     = P_MESSAGE-MSGNO
                PAR1       = P_MESSAGE-MSGV1
                PAR2       = P_MESSAGE-MSGV2
                PAR3       = P_MESSAGE-MSGV3
                PAR4       = P_MESSAGE-MSGV4
           IMPORTING
                BAPIRETURN = P_RETURN
           EXCEPTIONS
                OTHERS     = 1.
    endform.

  • How come i can't remotely lock my stolen macbook air since last week?

    how come i can't remotely lock my stolen macbook air since last week?
    Is it possible for the thief to go arround this system?
    When it was stolen around the afternoon, i could only trie to locate it in the evening.
    They must have done already something to avoid the locate my iphone app, beceause it is
    already since 13th of june that it is trying to lock my mac, but it still didn't go online...
    Is there another way? can someone help me out?
    I would appreciate it a lot!!
    greetings,
    Fred.

    Hello:
    If you did not set it up like this beforehand, you cannot:
    http://support.apple.com/kb/TS4006
    Make a police report.
    Barry

  • My iPhone 4s was stolen this weekend and I did the Remote Lock.  What exactly does that do?  Also, if i do the Remote Wipe will that erase all of my data and impede anyone from ever using the phone?

    My iPhone 4s was stolen this weekend and I did the Remote Lock.  What exactly does that do?  Also, if i do the Remote Wipe will that erase all of my data and impede anyone from ever using the phone?

    The remote lock locks the iphone with a passcode that you set. By remote wiping the device it will simply restore it and clear it of all its data, but by doing this it will prevent you tracking it and communicating with it (e.g. remote locking it) in the future

Maybe you are looking for