Remote Office DHCP_REQD problem - users cannot receive IPs

Dears,
I am trying to implement a remote office into our WLC 5508 environment.
Actually I have already did everything
- Local DHCP - OK
- VLANs at SW CORE - OK
- Lightweight AP already connected to a access switch, port in trunk, w/ "native vlan 3"
- HQ and Remote Office have different VLAN names but I have already did the vlan mapping
HQ
Remote Office
For some reason, users in remote office can authenticate very well... but they do not receive IPs...
Also, at the beggining of all this process, even after the new remote AP joined to WLC, for some reason all SSIDs received were not appearing to all users.... I had to go thru WLAN > AP GROUPS, then create a group "REMOTE" and added all WLANs (wnet, guest, mobile, consulting...) and the new remote office AP (AP01-RJOP) to that group... did I do right ?
Does anybody have a documentation explaining how to implement this environment in a remote office ?
thanks!
Thanks in advance!!

AP Groups are optional so it must be a configuration that was missed. Tale a look at this support doc which is step by step.
https://supportforums.cisco.com/docs/DOC-24082
Sent from Cisco Technical Support iPhone App

Similar Messages

  • User cannot receive External Send Output Message manually - ME22N

    Hi Guru's
    I have the following issue, once a User has saved the PO he wants to receive this PO to his email. He goes to "Messages" and selects Medium 5 "External Send" and in Partner he types his User ID in order to receive it.
    He is not receiving any emails and the status in Further Data is "2 incorrectly processed". When he types another User ID, this User does receive the email. Is there anything else I need to configure to this User ID so he can received this Output Messages? He is the only User that cannot receive these Output Messages.
    Regards

    Problem Solved!!
    I enter to table USR21 (Assign user name address key) and realized User ID did not exist. So I enter to table ADR6 (E-Mail Addresses)  and noticed it was a totally different User. I enter to table LFA1 (Vendor Master) and there was information about this User.
    This left me to one conclusion...This had nothing to do with the User ID
    The Client in the past created Vendors (MK01) has "Buyers". So when the Buyer wanted to send any PO to his email he just went to "Messages" and selected Output Type "NEU" / Medium 5 "External send" / Partner "Vendor#" = Buyer.
    I enter to MK02 and typed the Vendor# they gave him, in "General Data" check only "Address" and press ENTER, updated the email in the field and selected INT E-mail in "Standard Comm Mtd" and problem solved.
    Thank you all for your help
    Best Regards!!

  • TS3276 Hi, I can send mail without a problem, I cannot receive mail, I am using iCloud.

    Hello Mac' users
    I have a problem with receiving e-mail, no problem sending. I am using iCloud, any suggestions please?? I did receive a message telling me that "Unable to receive mail Port ???? timed out".
    Thanks to one and all
    Tony

    Check the "Cannot receive mail in OS X mail" section here:
    http://support.apple.com/kb/TS4002

  • I have an office 6500A printer I cannot receive email prints from asia Hp confirms it was sent !

    I have a 6500A office I can receive composed emails sent to my printer through regular email Yahoo and hotmail from my accounts but when I am in Asia I am not receiving the print jobs sent through these accounts to my printer. I do get a confirmation from Hp that they received my print jobs but they are not printing and when I log onto eprint it is not showing as being printed.

    My mom is having the same problem. She can send mail fine through her SBC Yahoo account, but only very few incoming messages arrive at Mail.app. You can see the others on-line using SBC Yahoo's web mail. It was working fine for weeks, now something has changed, and although my mom can make mistakes with setting things up, I know she hasn't changed anything, and some mail does make it through. Aaargh.

  • PC user cannot receive video from iChat

    I am trying to send video to a PC (XP) user. I see that the newest PC version of AIM isn't compatible, so he opened 5.5 - in the newest version it kept wanting him to download something for a library then nothing would happen. My side just showed waiting ona response from him.
    When he opened 5.5 AIM he accepted the invite from me - and my showed showed the chat was starting but nothing ever happened after that. He even tried turning his firewall off to no avail.
    Are we missing something? I know this is a common problem with iChat and PC folks...but there has to be some way. We can chat through Yahoo, but it's pretty choppy video there - but it does work at least.
    Any help would be great!

    Hi Kellie,
    Any Firewall if it is ON is going to need the ports for iChat to be set up.
    See Pics of Mac Firewall here HAs instructions on the ports needed.
    The modem is also going to need these ports open. As Evan says the easiest way to do this is to use teh UPnP setting if you have it.
    As a Firtst choice Use this site for info only It has many devices listed and has pics and Default IPs and Passwords in the instructions. Often the pics will show you where UPnP is on youe device. If not the information will gain you access to the device. As a last resort it will tell you how to Port Forward.
    OF course the PC user also has to make sure the AIM application is Enabled through the PC firewall and thier Modem.
    7:34 PM Sunday; March 26, 2006

  • User cannot receive the mail from portal

    Hi team
    One of the user is not receving mail in portal, when i check the status of the user is active and mail id is correct.
    Now my question is how to find the log from portal or we have to check from the R/3 end,
    since i am new to this portal administation please guide me. Your replies are very helpful.
    Regards
    Bhaskar.T

    Hi
    you can get the logs from /usr/sap/<SID>/j2ee/logs/defautltrace.trc, the file with the less size will be the latest one, alternatively you can monitor the the logs fron NWA,
    http://server.domain.name:50xx00/nwa ->monitoring ->Logs and traces.
    jo

  • Android users cannot receive text from iPhone users fix help

    I currently switched from an iPhone to an Android phone and now all my friends who use an iPhone cannot send messages to me. I talked to a representative for Apple and they said that my friends had to delete my contact and then re make it so they could send messages to me. ıs there a quicker fix to it, I already turned off iMessage on my iPhone but it still doesn't work and does anyone know if they plan on fixing it.

    Your friends have to delete any old conversations they had started with you when you had an iPhone, and the new conversations should go out normally as text message.
    This assumes that you actually did disable iMessage prior to switching to Android.    You can confirm by asking anyone you know with an iPhone that doesn't have you as a contact to try sending you a text.

  • Earthlink users cannot receive attachments

    attachments from my MAC email account (using verizon ISP) are not visible to earthlink WINDOWS recipients, why?

    I spoke to one my colleagues and he's told me that this may be caused by that domain being redelegated to the old nameservers - http://whois.domaintools.com/greenlux.com.au
    It's still using:
    Name Server:                     ns01.businesscatalyst.com
    Name Server:                     ns02.businesscatalyst.com
    You need to change those to either ns1.worldsecuresystems.com and ns2.worldsecuresystems.com or use ns01.freshbusinesssuite.com and ns02.freshbusinesssuite.com
    Cheers,
    -mario

  • Office365 User not receiving Meeting Request Email (but shows in Calendar)

    Hi,
    We have one user (so far) who has successfully migrated from Exchange 2007 to 'Office365' but when you sent them an meeting request they do not get ANY email notification of it. No Spam, rules, junk email are affecting it. There are no delegates on the account.
    I have removed the Office365 user license for them and then re-added it but made no difference.
    If the user goes into the calendar they can actually 'see' the meeting and accept / decline it in there but we obviously need the user to get some email notification of it so they are aware of a meeting and now get a 'surprise' meeting they knew nothing about!
    Other migrated users are able to receive email notifications of meeting requests without issue. There is just no trace of it for this user.

    Hi Peter,
    As per your description above, I understand that one user cannot receive meeting requests, instead, the meetings are placed on their calendar directly.
    I would like to confirm that whether he/she configured the email account into any Outlook clients, or actually we are talking about the web-based Outlook in Office 365 portal?
    If this is an issue in the Outlook desktop client, please check if you have ticked the option of
    Automatically accept meeting requests and remove canceled meetings
    under FILE>Options>Calendar>Auto Accept/Decline... Try untick it and verify again.
    If Outlook client is not involved here, I would suggest you post your question in the forum of Office 365 Community - email and calendar, where you can get more experienced responses:
    http://community.office365.com/en-us/f/158.aspx
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    Hope this helps.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • One person in my contact book cannot receive texts anymore. Suggestions?

    Hi,
    One person in my contact book (a non-iphone user) cannot receive text messages anymore. Any suggestions? The only thing done different is my nice did try to face-to-face them (by mistake). I delated the call attempt, delated the text history, even delated and re-installed the contact information. HELP!!

    Hello laurenblairf,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    To resolve issues with sending and receiving MMS, follow these steps
    Go to Settings and turn airplane mode off.
    Go to Settings > Messages and turn MMS Messaging on.
    Go to Settings > Cellular and turn Cellular Data on.
    Go to Settings > Cellular and turn Data Roaming on if you're roaming on a cellular provider network that is different from your billing provider's network.
    Make sure that you have a cellular data connection in the status bar of your iPhone.
    Go to Settings and turn Wi-Fi off. Open Safari and navigate to www.apple.com to verify that you have a data connection. Turn Wi-Fi back on to continue using Wi-Fi for other features. If your cellular data connection isn't available, follow these steps.
    Make sure that you can send and receive SMS. If you can't send and receive SMS, see the "Issues with sending and receiving SMS" section, above. MMS might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports.
    Restart your iPhone.
    Tap Settings > General > Reset > Reset Network Settings on your iPhone.
    Remove your SIM card and insert it again.
    Have a nice day,
    Mario

  • Hi, I have a problem that I receive lots of Spam messages from my office, which are of no use for me. I am not in a position to bar the message from the service provider due to official constrains. I want to know if I can bar the message on Iphone

    Hi, I have a problem that I receive lots of Spam messages from my office, I cannot bar the spam text from service provider due to official constrain.
    I just want to know if there is any mechanisme where i can bar the message from a specific sender. I know there are some apps like Iblacklist available but we do not find it in any Iphone which is not jailbreak. I was just thinking of developing some code for it.

    No. You can't. Filtering would have to be done at the server level.

  • Problem with some user accounts receiving email

    We are running Exchange 2003 and having our end users get their email via Outlook Web Access on their Blackberry devices, and are having a problem with just some users. When we go into BIS, we can setup their account just fine, but they never receive any e-mails. They can send e-mails fine also. We have done the following tests:
    1. I have setup my AT&T Curve to check my e-mail, works fine.
    2. I have three users I'm currently using as my "test group" since this problem began. Two using Verizon Storms, and one using a Verizon Bold. All three can send e-mail fine, one of the storm users can check e-mail, but not the other two.
    3. I have setup these accounts on my (known working from test 1) Blackberry Curve, and get the same results. I cannot receive e-mail on either of those two accounts.
    I don't see any errors in any logs (unless I am looking in the wrong place). I've even gone throught adsiedit and compared the msexch* settings and they all seem comperable. Any ideas as to what could be causing this?

    On the devices browser options, are these settings all identical?
    support HTML tables : Yes/Ns
    style sheets media type : handheld/Screen
    emulation mode : Blackberry/ Openwave (WAP/Openwave gateway/MSIE/MS PocketIE/Netscape)Content mode : WML & HTML / HTML only / WML only
    If someone helped you give them kudos. Research all info!

  • Why the remote user cannot open any folds?

    Why the remote user cannot open any folds?
    I create a user user8 and already grant the user the role connect, OLTP-user, and resource. I also assign this user unlimited space in the user8 tablespace. But after connection, the user8 cannot open any folds and the connection is terninated automaticlly.

    Why the remote user cannot open any folds?I don't know what you have.
    I don't know what you do.
    I don't know what you see.
    It is really, Really, REALLY difficult to fix a problem that can not be seen.
    use COPY & PASTE so we can see what you do & how Oracle responds.
    do as below so we can know complete Oracle version & OS name.
    Post via COPY & PASTE complete results of
    SELECT * from v$version;

  • Most iPhone user's cannot receive text from me and my NEW Note 4

    I chose to try the pre-installed +Messenger app from Verizon to be used rather than the fuctional default messenger. It wasn't what I expected so I switched back to the original message app. Well, that's when the issue's began with most of my contacts who use Iphone's.
    I would send text to iPhone user's with no delivered confirmation text being returned as a notification. So I called them and they said they didn't receive a text. I realized the problem was a conflict with going back to the original messaging app/software.
    Went to the Verizon store where I purchased the phone three times! The first salesman told me to have the iPhone user's to go into their text settings and turn on "Send MMS". That didn't resolve the issue. The second salesman called tech support and fixed the problem. Although I didn't know  was done but, it was apparently a temporary fixed because it continued to happen
    The 3rd salesman had to reset to factory settings and disabled/removed the +Messenger app from Verizon.
    Still experiencing this stressful issue with my Note4.
    PLEASE HELP ME!
    I_chingon

    Sorry to hear that! I tend to use the default Messages app more than anything else too.
    I'm curious about your issue because you said "most iPhone users..." That can make the situation a little bit tricky, but it can also be used to your advantage, because if you compare the messaging/cellular settings on one iPhone that works and one that doesn't, you will likely find your resolution. I'd suggest looking at an iPhone that doesn't receive your messages and try to make the settings match the settings of an iPhone that successfully receives your texts.
    Since it only happens with iPhone users the problem is likely not on your end; it's more than likely an issue with iMessage on the recipients' phone, but you can certainly try to deactivate your iMessage account (if you have one). Deregister and Turn Off iMessage - Apple Support. Bear in mind that this tool is usually used to solve issues that are the opposite of yours (iPhone users cannot send texts to you).

  • Users cannot log into Remote Desktop after 3/11/2015 update!

    I have a simple network where users can log into a Windows SBS 2008 server with Remote Desktop to access various applications.  This worked quite smoothly until this morning, after the updates of last evening. (3/11/2015)
    When users tried to log into the Remote Desktop this morning their credentials were rejected, as if their username and/or password were incorrect.  Even I (as the administrator) could not log in remotely.  Finally I connected a monitor and keyboard
    directly to the server and was able to log in without an issue.  After logging in directly I was able to connect through remote desktop.
    This method worked for my other users as well - after I logged them in directly they were able to use remote desktop no problem.
    The trouble is that I have a couple dozen users, and this is an issue that should not be occurring.  What happened in the last update to cause remote desktop to reject users credentials?  Why does it only work after the user logs in directly? 
    And most importantly, how do I fix this?
    A few notes:
    Simply browsing for files on the server also asks for the user's name and password, and this works as well.  This is only a remote desktop issue.
    I have already checked to make sure the domain was correct.  It was.
    I have already checked to make sure the usernames and passwords were correct.  They were.
    I have already checked to make sure this was not a unique issue for a single (or limited number) of users.  This issue effected
    all users all the network.
    Thank you very much for your help,
    Dustin

    I'm curious here...  If the server is rebooted, does it put the RDS users back into a "credentials failed" situation?  If so, could you please have them log in with credentials:
    domain.local\username    (I suspect they may be currently using domain\username)
    and see if that fixes the RDS problem without having to first log into the server directly.
     The ".local" may be ".lan" or ".somethingelse" depending on how you initially configured your domain, but the default for SBS 2008 is ".local"
    Merv Porter
    =========================
    That's a good question - the server will auto-reboot this evening and I'll test again in the morning. 
    You are correct that we've been using domain\username.  I tried domain.local\username (which is the way we've set up), and that did not work either.
    I'll let you know how things turn out tomorrow morning.  I don't want to mess with my users anymore today. :P
    Dustin

Maybe you are looking for