Removal of New field in iView

Hi guys,
Was wondering, let's say I add in a new field in an ESS/MSS iView (i.e. customize through NWDS) that retrieves from custom table and deploy to Portal. Then sometime down the road, my client wants to remove this field from the iView (i.e. undo the change). Can this be done through configuration (in PCD) to remove this field? Or will it require customization through NWDS to remove it?
Thanks guys!

First of all I am assuming that the iview is a webdynpro iview. Is it?
Webdynpro has some functionality called webdynpro personalisation which allows you to hide fields, renames labels etc. It does not need NWDS as it is personalising, not modifying the content. It simply adds parameters into the properties of the iview. You do need NWDS to add fields though.
Your original question is can you remove it - the answer is yes, by two methods. One by using webdynpro personlisation, the other is by using NWDS. If you are never going to use the field after adding it, and the iview is a SAP standard iview, you should ideally set the iview back to SAP standard in NWDS - as the iview is then supported by SAP.
To learn more about webdynpro personlisation see this blog:
Hacking the new Portal iView Personalization Feature
Paul

Similar Messages

New fields for Attributes Data Tab in Org Model

Hi, Guru's
I want to add/remove a new fields for Org model --->Attributes data tab
Diivision
Currency
region
dist.chnl
like that I want to add another new XXXX and respected values
How it would be done.
Regards
CR Gupta

Thank you.
I didn't get get the final Object
Can any one give solution.
system automatically generating the Table = HRT1222 and Field = LOW,
But
I need to maintain some values and to be select one from that list.
How can I overcome ?
Thank You.
Edited by: CR.Gupta on Oct 1, 2011 7:53 PM

Adding a new field to the iView thru OADP

Hi All,
The customer has implemented the ECM for mySAP ERP 2005.
I have the following requirement for the current assignment:
1.I need to add a new field to the iView (webbdynpro).How can I do it using the OADP in IMG?
Pleae help.
thanx,
Bhupesh

Hi,
Kindly check the following threads:
/message/1755908#1755908 [original link is broken]
/message/2496839#2496839 [original link is broken]
best regards,
Thangesh

New fields created in MDM Console not visible on Portal iViews

Hi All
I would like to ask you. I recently encouraged very strange and annoying problem. We are developing Vendor repository. Menatime we have created some iViews and pages on the Portal. All of them are displayed from Main table. We can see all fields and added/deleted records.
However I can not add any new fields (from MDM Console main table) we have created. That is whired because I only can see all fields beeing in repository for long time now, but all new fields (from that same table) ar not visible on portal.
I tried few options with creating new and different iViews. No help. All the time I can vise old fields from repository but new one are not available.
Can you plase advice what is/ may be wrong?
Thank you in advance.
BR
Rafal

Hi All
After restarting server problem solved. That mean there is a casching problem. After investigation here is service to restart:
J2EE engine
Thank you for help.
BR
Rafal
Edited by: Rafal Paczynski on Sep 29, 2011 12:21 PM

How to create a new field in a sub screen in material master. ?

How to create a new field in a sub screen in material master. ?
Kindly help us.
LIke wise tell me how to create a new sub screen as per my desired

Follow the documentation of Logistics - General->Material Master->Configuring the Material Master->Create Program for Customized Subscreens to add the new field in material master.
Create Program for Customized Subscreens
In this IMG activity, you can create a function group of your own by copying function group MGD1 (for industry) or function group MGD2 (for retail). The subscreens are not copied, except for two subscreens which are copied for technical reasons. You can use this copy to create subscreens of your own which you can assign to a data screen in the activity Define Structure of Data Screens for Each Screen Sequence.
Requirements
Be sure to read the program documentation first.
Activities
1. Create a function group of your own by choosing Execute.
2. Enter a name containing up to 25 characters, beginning with the letter Y or Z, and choose Save.
3. Access the Object Navigator.
You do this from the SAP standard menu by choosing Tools -> ABAP Workbench, and then Object Navigator.
4. Display either program SAPLMGD1 (industry) or SAPLMGD2 (retail) as required.
5. Copy the subscreens as required, ensuring that they already contain as many as possible of the field names you want to use in your function group. You do this as follows:
a) Choose Screens, position the cursor on the corresponding subscreen, and choose Copy in the context menu.
b) Enter the program to which you want to copy the subscreen, prefixing it with SAPL, and enter a screen number. Use the screen number of the original subscreen where possible. If the F1 help is specific to a particular subscreen, this ensures that this context-specific help continues to be displayed.
Example
You have called your function group YENTERPRISE, to which you want to copy subscreen SAPLMGD1 2301. Enter SAPLYENTERPRISE as the program to which the subscreen is to be copied, and enter (preferably) 2301 as the screen number.
6. Return to the initial screen of the Object Navigator and display your program. In the example above, you would enter SAPLYENTERPRISE.
7. Choose Update object list.
8. Select the subscreen you have copied and activate it by choosing Activate in the context menu.
Using the Screen Painter, you can remove fields you do not require on the subscreen or include additional fields from other subscreens (see the ABAP Dictionary). For information on the Screen Painter, see the SAP library documentation BC ABAP Workbench Tools.
Points to consider when removing or adding fields
Make sure that a field statement exists for each field on the subscreen since data may not otherwise be transported correctly. You can use subscreen SAPLMGD1 2002 as an example.
For the fields you have added, include any check modules and modules for self-programmed F4 help that are called up for these fields on the original subscreen. You can do this by displaying the flow logic for the original subscreen and searching for such modules. They normally have the same names as the fields themselves. When you find a module, copy the corresponding module call to your subscreen.
If you change the order in which fields are transported that are checked together in the flow logic (such as the safety stock and minimum safety stock), you must deactivate the check module for the first field and activate it for the second. The system would otherwise transport the first field, and carry out the check before the second field is transported.
Any error messages that fields are unknown when activating the subscreen are due to the fields still being included in checks, even though you have removed the fields from the subscreen. Search for the fields in the source code and make the lines in which they appear comment lines. Then reactivate the screen.
9. Assign the subscreen to a data screen as required.
Note on transport
Use the Workbench Organizer to transport the copy you have created.
Proceed

Adding a new field to existing structure

HI all
I am adding a new field to the existing structure in BW ,shall I remove all the data in the cube to fill fill this field for the previous records and reload again or any other solution
thanks in advance

Hi,
Yu need to delete the data to fill the new field again.
Assign points if it helps
Regards,
Srinivas

New field is not printed in Purchase Order (PO)

I have added a new field in PO's Print Layout Designer (PLD). For example, I add a field called "Part Number" between "#" and "Description" fields. But when I print the PO, only "#" and "Description" fields are printed. The new "Part Number" field is ignored. I think there must be some sort of link between the new "Part Number" field in PLD and the "Item No." in the PO. This is the thing I missed. Can anybody give me a clue?

hi..
i think u missed to check the propery of perticular field which u have inserted. You please check the relate to and link to property of that field if there is any link, pl remove it. cause the linked field does not get value from db. so the field is not displayed. or check it the check box of visible is checked.
I think it may help u.
Regards,
Chintesh Soni

How to add new fields to CRM 2007 Web UI

Hi,
I am new to SAP CRM 2007 and I am interested in how to extend the Web UI, for example adding new fields, to meet the customer requirements. Should I use the EEW or is there another "new and easier" way?
Thanx & best regards,
Oliver
Edited by: Oliver Pregler on Jan 30, 2008 5:50 PM

Actually for the new IC webclient UI you have need to take a look at your options:
1. New Installation:
Use the EEWB and add the fields. As part of the EEWB work, you will have a couple of post-processing steps where you will add your generated fields to the new screens. However this doesn't require any programming.
2. Upgrade from CRM 4.0/50
- New fields to add as part of upgrade
See the directions for new installation
- Existing fields to add as part of upgrade
--See the blog on the 40/52 CUSTOMER_H migration for transaction fields
--Business Partner fields part of BUT000 available via UI configuration tool, no extra work needed
--Business Partner fields part of tabular extension, manual work required, I am still "perfecting" this method and plan on writing a blog once I have the technique finished.
--Product Attributes - use the transaction CRMM_UI_PROD_GEN and CRMM_UIU_PROD_CONFIG
I know CRM 2007 is based on the same tech foundation as 2006s, with some differences in how the UI tool works and the fact there are some screen layout changes(editable overviews). The extension procedures are generally the same. I can answer some of you extension questions based on my work with CRM 52 so far. It will generally apply to your situation.
BTW: The PCUI is no longer supported in CRM 2006s and above. Even the old SAP GUI transactions such as BP, COMM_PRODUCT are removed from the standard CRM menu. The SAP CRM web client should be used instead now.
Take care,
Stephen

How to add new fields to CRM contract Product List tab?

Hi all!
I would like to add a new custom field for CRM contract (CRMD_BUS2000121) item level, on the Product List tab.
Here I found CRMT_0100A_ORDPRP_I_EXT_UI structure, therefore I enhanced this with new append structure and new fields.
I also added the new fields to ORDPRP_I append structure and mapped the new fields in CRMC_MAP.
For some reason the new fields are on the screen but they are grey, not changeable. What did I do wrong?
Thanks,
Tamas Pentek

Actually for the new IC webclient UI you have need to take a look at your options:
1. New Installation:
Use the EEWB and add the fields. As part of the EEWB work, you will have a couple of post-processing steps where you will add your generated fields to the new screens. However this doesn't require any programming.
2. Upgrade from CRM 4.0/50
- New fields to add as part of upgrade
See the directions for new installation
- Existing fields to add as part of upgrade
--See the blog on the 40/52 CUSTOMER_H migration for transaction fields
--Business Partner fields part of BUT000 available via UI configuration tool, no extra work needed
--Business Partner fields part of tabular extension, manual work required, I am still "perfecting" this method and plan on writing a blog once I have the technique finished.
--Product Attributes - use the transaction CRMM_UI_PROD_GEN and CRMM_UIU_PROD_CONFIG
I know CRM 2007 is based on the same tech foundation as 2006s, with some differences in how the UI tool works and the fact there are some screen layout changes(editable overviews). The extension procedures are generally the same. I can answer some of you extension questions based on my work with CRM 52 so far. It will generally apply to your situation.
BTW: The PCUI is no longer supported in CRM 2006s and above. Even the old SAP GUI transactions such as BP, COMM_PRODUCT are removed from the standard CRM menu. The SAP CRM web client should be used instead now.
Take care,
Stephen

I have a fillable form that's already been made. I need to edit fields by moving them and I need to add new fields. How do I do that?

I have a form that was made by someone else. I need to move fields and add new fields in the same box. How do I do that?

If the form was created in Acrobat and you have Acrobat, you should be able to edit the fields by selecting: Tools > Forms > Edit
This is for Acrobat 11. If the PDF has security restrictions that prevent editing or was created with LiveCycle Designer, you won't be able to edit it in Acrobat. If security was applied, you'll need to know the password in order to remove it to allow editing.

New Field Required In ME21N/ME22N/ME23N

Dear All Experts,
We have some requirements to add new field in purchase order. We have done some development on this, but it is not working. Below :-
<<Specifications removed by moderator>>
Coding is as below:-
zxm06top
data: gl_aktyp type c,
gl_no_screen type c,
gl_rekko like ekko,
gl_ekko_ci like ekko_ci,
gl_ekpo_ci like ekpo_ci,
gl_ekpo like ekpo,
gl_ekko like ekko,
gl_ucomm like sy-ucomm.
types: begin of ekko_tab,
ebeln like ekko-ebeln,
ebelp LIKE ekpo-ebelp,
ekko like ekko,
end of ekko_tab.
data: gt_ref_ekko_tab type table of ekko_tab.
EXIT_SAPMM06E_006
gl_aktyp = i_trtyp.
gl_no_screen = i_no_screen.
ekko_ci = i_ci_ekko.
gl_ekko = i_ekko.
EXIT_SAPMM06E_007
move-corresponding i_ekko to gl_ekko_ci.
gl_ekko = i_ekko.
EXIT_SAPMM06E_008
e_ci_ekko = gl_ekko_ci.
if gl_ekko_ci-zzremark1 ne ekko_ci-zzremark1.
e_ci_ekko-zzremark1 = ekko_ci-zzremark1.
if gl_aktyp ne 'A'.
e_ci_update = 'X'.
endif.
endif.
But i am unable to save records to EKKO table and also unable to fetch them.
Kindly help me on this topic.
Regards,
Shaligram
Moderator Message: Do not dump your specifications. Be clear with what exactly is your problem. A generic statement, saying that "its not working", does not help. Have you debugged your program and tried to analyze where's the problem area?
Edited by: kishan P on Jun 6, 2011 2:06 PM

Hi,
Try this :
To Move data from screen fields to program and vice versa
(A). Screen fields to program (EXIT_SAPMM06E_008)
In this FM :
move-corresponding (Yor screen fields, i guess it is *gl_ekko_ci* in your program) to e_ci_ekko.
(B). Program to Screen (EXIT_SAPMM06E_006)
In this FM :
move-corresponding i_ekko to (Yor screen fields, i guess it is *gl_ekko_ci* in your program).
Similarly for item details and make sure that your project is active

I have added a new field in IT0006 ,Now when try to create a new record for

Hi Experts,
I have added a new field in IT0006 ,Now when try to create a new record for a employee.
1,If I give the SUBTY in the PA30 screen getting an error "Don't Specify a subty error"
if and remove the subty and press CREATE button popup's comes and list the subty values.......It was allowing me to enter the subty in the PA30 screen prior to my new field addition in IT0006... is't a problem with the new field addition?
2, After I choose the subty value from the pop-up I am able to see the next screen....BUT GETTING AN INFORMATION MESSAGE THAT "Assignment to feature P0006 did not take place"?
3,, In the next screen after I have passed all mandatory fields while attempting SAVE I am getting an error called " Time constraint table in T777D is incorrect" what could be the cause?

How are u adding fields to table using append in se11 or pm01.
if you are adding fields using se11 delete it and add it0005 in transaction pm01 and generate object.
add fields to structure CI_XX_R0005 and generate screen and maintain entry and screen in maintance view add entry and activate program.

Adding a new field in the ESS webdynpro application.

Hello All,
We are currently using the ECC 5.0 and Portal EP 6.0 SP18.
In the Family members Iview ( Web dynpro) there are different Items like Mother, Father, Child etc which we can add from the IMG. If we want to add new field ( SSN ) to the Spouse or Delete some standard given fields like Nationality in this Iview how can we achieve this. Please let me know. This is very urgent!
Thanks,
Chakri.

No problem - I already sent you the material.
If you still need some help then have a look at my tutorial, which you can download by using this link:
https://www.sdn.sap.com/irj/sdn/softwaredownload?download=/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/business_packages/a1-8-4/teched-2006-sdn-day/sdnday_ess_hr.zip
Please note that it requires SDN logon to download the file.
Hope it helps,
Harald

New field in the datasource

Hi all;
Im trying to add a new field to the 0CO_OM_OPA_6 datasource.
The new field is the Cost Center (KOSTL).
I just add this field to the Append Structure.
If I check it, the following message appears: Field KOSTL does not lie within customer namespace.
After the activation of the append structure, from the ICORDCSTA1, and remove the hide field from the datasource, I tested in RSA3 but the Cost Center columm appears empty.
Is there any step missing?
Can anyone help me?
Regards;
Ricardo

Hi
Whenever you enhance the data source,it is best practice to give name as zz*
and once you add these fields..system doesnot know how to fill these fields with data..so you have to write code to populate data into your fields..
go to se38(r/3 side) and give include 'zxrsau01' and click on change...
write code to fill your fields activate it and now check in rsa3...
Code sample
when '0CO_OM_OPA_6'
do this thing
Hope it helps
Thanks
Teja

How to remove the mandatory field setting in output control

Hi everybody,
While printing a Payment Voucher through F-58 and FBZ5(reprint), there are two output devices, the first one is - printer for forms and second is - payment advice printer.
In our case we have configured the cheque printing and payment voucher printing seperately. The cheque goes to first printer(kept mandatory field) and the payment voucher goes to second printer. One of our plant does not print the cheque from SAP, they only print the payment voucher because the cheque is manually prepared. How do I avoid the cheque printing. Is there any way out to print only the payment voucher through F-58 and FBZ5
Please guide me how to tackle it or how to remove the mandatory field setting in the output control screen?
Regards
Paul

Hi
As of my understanding, there is no relation ship between the Sales Organization and this mandatory partner function.
Here are few suggestions.
1. Since Partner functions are defualted and made mandatory in the Partner Determination Procedure so you have to remove this Mandatory option for PE from the Partner Determination Procedure that is AG if using standard one.
2. If you are using a single partner function than , Copy and create a New partner procedure and a new account group . Where in one you can default PE as mandatory and in another one you make a optional where it can be choosen manually while creating the customer.
Follow the path to check for entries :
SPRO > sales & distribution > Basic Function > Partner Determination > set up partner determination > select for customer master > select the partner procedure you are using AG as standard > then partner function in procedure > here maintian the check as required like, Mandatory or No check for Non Mandatory .
Thanks
RB

Removal of New field in iView

Similar Messages

Maybe you are looking for